Print Page - What port must i open/set?

Title: What port must i open/set?
Post by: ketso on 07 November, 2003, 23:02:15

I opened udp/tcp port 411 and 412 inn/out on the router and forwarded both to my machine.

I set 411 as port in PtokaX TD4

All firewall was of and still ppl get timed out when they try to connect.

I had a hubserver earlier and that was working with this ports open, so what is it that i doing wrong?

Title:
Post by: [T-G-T]M@sto on 07 November, 2003, 23:11:18

QuoteOriginally posted by ketso
I opened udp/tcp port 411 and 412 inn/out on the router and forwarded both to my machine.

I set 411 as port in PtokaX TD4

All firewall was of and still ppl get timed out when they try to connect.

I had a hubserver earlier and that was working with this ports open, so what is it that i doing wrong?

Open port 411 - 412 - 413

Title:
Post by: ketso on 08 November, 2003, 02:57:53

QuoteOriginally posted by [T-G-T]M@sto
Open port 411 - 412 - 413

That 413 port helped :)
Thanks!

Title:
Post by: Corsari on 27 November, 2003, 17:52:13

QuoteOriginally posted by ketso
QuoteOriginally posted by [T-G-T]M@sto
Open port 411 - 412 - 413

That 413 port helped :)
Thanks!

only in TCP or both TCP and UDP ?

t y

Robert

Title:
Post by: plop on 27 November, 2003, 19:16:14

411 --> tcp
412 --> tcp and udp
413 --> tcp (not sure can be it needs udp 2, never looked this up)

plop

Title:
Post by: Odin on 29 November, 2003, 03:04:20

One open port for incomming tcp traffic should do the trick. I have only port 1337 tcp routed to the hub server. But the firewall must allowe outgoing traffic.

PtokaX forum

PtokaX => Support => Topic started by: ketso on 07 November, 2003, 23:02:15