Multiple hubs
 

News:

29 December 2022 - PtokaX 0.5.3.0 (20th anniversary edition) released...
11 April 2017 - PtokaX 0.5.2.2 released...
8 April 2015 Anti child and anti pedo pr0n scripts are not allowed anymore on this board!
28 September 2015 - PtokaX 0.5.2.1 for Windows 10 IoT released...
3 September 2015 - PtokaX 0.5.2.1 released...
16 August 2015 - PtokaX 0.5.2.0 released...
1 August 2015 - Crowdfunding for ADC protocol support in PtokaX ended. Clearly nobody want ADC support...
30 June 2015 - PtokaX 0.5.1.0 released...
30 April 2015 Crowdfunding for ADC protocol support in PtokaX
26 April 2015 New support hub!
20 February 2015 - PtokaX 0.5.0.3 released...
13 April 2014 - PtokaX 0.5.0.2 released...
23 March 2014 - PtokaX testing version 0.5.0.1 build 454 is available.
04 March 2014 - PtokaX.org sites were temporary down because of DDOS attacks and issues with hosting service provider.

Main Menu

Multiple hubs

Started by dodgeviper, 16 August, 2007, 10:52:46

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dodgeviper

Can anyone please tell me how to start 2 or more hubs using the ip but different ports...or is there a software that can help in starting 2 hubs but the computer remains the same...what i mean to say is that i have a lan connection and i am already running a hub on a ip..can any software give me other ip as well retain the same ip so that 2 hubs can be started..

bastya_elvtars

Set one hub to another port.
Everything could have been anything else and it would have just as much meaning.

dodgeviper


imb

heh, if only other problems were so simple.

bastya_elvtars

The question contained the solution, by the way. :P
Everything could have been anything else and it would have just as much meaning.

bpl

Hey i have changed the Ports also but it makes no difference????

Can u please Explain me in detail wahat to do???

Incluting the changes in lan settings and ptoka setting if any????

bpl

Plz reply to the Above Post guys...........

bpl

Thanx a lot.....................

But its not working out......

The prob is in want to host two hub with two different IP......

?StIfFLEr??

Well This is how i host two hubs on two different ip.
1. take ptokax setup folder (for 2 hubs 2 ptokax in 2 different folder)
2. A) the first folder name it as "a" hub
       i]Go and fill in all the details and the ip u want to host the hub.
       ii]Tick on the option resolve to ip and listen to this ip (both must be checked in the box)
       iii] Add TCP port number as 411 and UDP port number as 411 (if you are using older version of ptokax use secondary TCP port number as 1024)
       iv) Save settings and start the hub
3. B) the second folder name it as "b" hub
      i]Follow as you have done in the "a"hub but this time change the ip
      ii]All port numbers will remain as it was in "a" hub

I thing your hub was not starting with different port numbers may be because you never added the port number that you have mentioned in the ptokax after the ip
example xxx.xxx.xxx.xxx:(portnumber that u have entered for the respective ip in the ptokax)
If you would have done it your problem would have been solved long before.
More over using 411 as your port number need not requires you to add it after the ip it will be taken as default and your hub will be running on seperate ip without the port number
example xxx.xxx.xxx.xxx ----thats it
i am sure if you follow the instruction you will get a positive result.

bastya_elvtars

It is covered in the wiki; you should also have told this in the first place...  ::)
Everything could have been anything else and it would have just as much meaning.

?StIfFLEr??

 :P
sorry bustya but i actually learnt it via experimenting with the ptokax even i was unaware about it.Will surely have a look at it.

bpl

Than A  LOt Siffler And Bust..................

I figured out the pRoblem .........................
Evry thing i was doing was Perfect but the only stupidity was, i didnot add the ip in my lan TCP/IP.....

It was really Stupid of me.........Thanx for ur Co-operation.

nehio

I use Ptokax on 5 networks, same server, one instance is enough, the othres connect through the same port as ptokax listens on all networks so its just the ip changing, it's a particular case though.

For multiple hub on a same pc just change port, and have 2 seperate folders.

Madman

This topic is almost a year old, and it was answered in the first answer...
We suffer in silence, we lurk in the shadows, we kill in the night
Site currently down, ETA of returning online is 2099 ;p

TZB

Quote? Reply #12 on: December 18, 2008, 05:38:42 PM ?

The very last reply to this thread.
Today Oct 5 2009

Its bit late replied But still the same reply as all the above post did.Was it any stats improvement? :P LOCK Please

TZB

LOL same timming Madman..

Psycho_Chihuahua

PtokaxWiki ?PtokaX Mirror + latest Libs

01100001011011000111001101101111001000000110101101101110011011110111011101101110001000000110000101110011001000000101010001101111011010110110111101101100011011110111001101101000

SMF spam blocked by CleanTalk