I created (With some help) a hub.. Now I can get in by connecting 127.0.0.1.. But when I try with another name, and fill in my no-ip adress he says, connection refused bij target machine.. Anyone an idea?
Hi, if your hub is on the same machine as your dc++, then you can only connect by using 127.0.0.1 or localhost. Using the no-ip address won't work.
But other people should be able to connect to your hub with the no-ip address if you set things right on your end (ie firewall, router, NAT, etc) and the hub is running (don't forget the "Start hub" button :P)
QuoteOriginally posted by bolamix
Hi, if your hub is on the same machine as your dc++, then you can only connect by using 127.0.0.1 or localhost. Using the no-ip address won't work.
But other people should be able to connect to your hub with the no-ip address if you set things right on your end (ie firewall, router, NAT, etc) and the hub is running (don't forget the "Start hub" button :P)
The Hub is running.. I don't have an idea ifhe settings of my Router are right.. When I open a port, my internet connection disappears.. Don't know how it's possible (Belkin Router).. I think I need some help with it..
(Excuse me for the bad English)
QuoteOriginally posted by Gielmobiell
.. When I open a port, my internet connection disappears..
This part of the problem is solved.. But still, connection refused by target machine,, I opened port 411, and even with the firewalls down, (Including windows) nothing.. Anyone an idea?
QuoteOriginally posted by Gielmobiell
QuoteOriginally posted by Gielmobiell
.. When I open a port, my internet connection disappears..
This part of the problem is solved.. But still, connection refused by target machine,, I opened port 411, and even with the firewalls down, (Including windows) nothing.. Anyone an idea?
//www.dslreports.com/faq/dc
btw you should have other ports open IMHO, i have no time 2 look 4 ya - please 4give me ;p
Get a mate or someone you trust to connect to you using your IP address not the no-ip addy!
Problem solved:).. Thnx all for your help.. Some more people in my hub should be nice now:)
hi i have a question
ptokax run on port? tcp1209 and second tcp 411
and udp 1209
but how must i add it in my router ?????
U decide wich port it should run on that is completly up To you.
And how to change it in your router it depends on the router.
But U will have to login to the router and open the ports (for ptokax of your choice) pointing to the correct computer.(where your ptokax is Running) ;)
Belive portforwarding is nice site for diffrent routershttp://portforward.com/routers.htm (http://portforward.com/routers.htm)
regards /swee