---------------------------2005-08-08 17:09:51---------------------------
Exception 'EAccessViolation' in module PXLUA.DLL at 00000636
Access violation at address 00281636 in module 'PXLUA.DLL'. Write of address 00000664
Call stack:
:00281636 [PXLUA.DLL] lua_settop (lapi.c, line 167)
:0046BF7A [PtokaX.exe] error (luaInterface.cpp, line 3095)
:00472DD9 [PtokaX.exe] lua_Main (luaInterface.cpp, line 3819)
:004752A4 [PtokaX.exe] LuaScriptsSet::Main (luaInterface.cpp, line 4522)
:0041C88F [PtokaX.exe] ThubForm::LUArstClick (frmHub.cpp, line 2595)
:780C3400 [COMCTL32.DLL]
:005744AE [PtokaX.exe]
:00538869 [PtokaX.exe]
:0053895D [PtokaX.exe]
:00574313 [PtokaX.exe]
:77D38654 [USER32.DLL]
:77D38723 [USER32.DLL]
:77D38765 [USER32.DLL]
:77D38737 [USER32.DLL]
:77F5A7ED [ntdll.dll]
:77F5B904 [ntdll.dll]
:77E6E03A [kernel32.dll]
:77E6E057 [kernel32.dll]
:005772B8 [PtokaX.exe]
:77D3A608 [USER32.DLL]
:005387DD [PtokaX.exe]
:005740E3 [PtokaX.exe]
:005773F0 [PtokaX.exe]
:00577A4C [PtokaX.exe]
:00574313 [PtokaX.exe]
:0050C13E [PtokaX.exe]
:77D38654 [USER32.DLL]
:77F59037 [ntdll.dll]
:77C1AB2E [msvcrt.dll]
:77C1AB33 [msvcrt.dll]
:7F003E28 [GDI32.dll]
:005772B8 [PtokaX.exe]
:5B276BE4 [uxtheme.dll]
:00502DB9 [PtokaX.exe]
:0055767D [PtokaX.exe]
:00576F33 [PtokaX.exe]
:005772B8 [PtokaX.exe]
:00576F33 [PtokaX.exe]
:0050C13E [PtokaX.exe]
:77D38654 [USER32.DLL]
:77D38723 [USER32.DLL]
:77D38737 [USER32.DLL]
:77D3A0EC [USER32.DLL]
:77D3A14D [USER32.DLL]
:780C199B [COMCTL32.DLL]
:780C1A74 [COMCTL32.DLL]
:780C3C76 [COMCTL32.DLL]
:77D38723 [USER32.DLL]
:77D38765 [USER32.DLL]
:77D38737 [USER32.DLL]
:77D38654 [USER32.DLL]
:77D38723 [USER32.DLL]
:77D3A7EB [USER32.DLL]
:77D3AA95 [USER32.DLL]
:0057739C [PtokaX.exe]
:005748B3 [PtokaX.exe]
:00574313 [PtokaX.exe]
:01BB107A [gpsB2.dll]
:77D3EFA4 [USER32.DLL]
:77D3EE79 [USER32.DLL]
Recursive call (2 times):
:77D3EE88 [USER32.DLL]
:77D5FE0D [USER32.DLL]
:77D5FE1D [USER32.DLL]
:77F75DA3 [ntdll.dll]
:77D3930B [USER32.DLL]
:77D3BEDD [USER32.DLL]
:005770E0 [PtokaX.exe]
:005772B8 [PtokaX.exe]
:005387DD [PtokaX.exe]
:00576F33 [PtokaX.exe]
:00576F4B [PtokaX.exe]
:0050C13E [PtokaX.exe]
:77D38654 [USER32.DLL]
:77D38723 [USER32.DLL]
:77D38999 [USER32.DLL]
:77D38FD2 [USER32.DLL]
:00566B58 [PtokaX.exe]
:00566B8F [PtokaX.exe]
:00566DAF [PtokaX.exe]
:00566DF2 [PtokaX.exe]
:00401B40 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005ADBBF [PtokaX.exe]
:00400000 [PtokaX.exe]
:70A9F849 [SHLWAPI.dll]
:77E8141A [kernel32.dll]
:70A9F849 [SHLWAPI.dll]
Main Thread ID = 00000798, Current Thread ID = 00000798
Registers:
EAX = 02130650 CS = 001B EIP = 00281636 Flags = 00010246
EBX = 01A15A58 SS = 0023 ESP = 0012F564 EBP = 0012F564
ECX = 00000000 DS = 0023 ESI = 00538848 FS = 0038
EDX = 00000664 ES = 0023 EDI = 0012F798 GS = 0000
Code at CS:EIP
89 0A 8B 45 0C C1 E0 02 8D 04 40 8B 55 08 03 42
Stack:
0012F5BC 0046BF7A 02130650 00000071 01136A88
00000000 00000000 70A9F849 00525E05 01A4CB38
005EC70B 01A527C8 0000000B 00000000 01A4C758
70A9F849 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.21 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 1
Type : 1
iJoins: 6, iParts: 3, iLogged: 3
NicklistLen : 43
OplistLen : 33
MyInfosLen : 0
MyInfosTagLen : 395
QueueA Size : 1024
QueueA Len : 0
QueueB Size : 1024
QueueB Len : 0
PQueue Size : 1024
PQueue Len : 0
HQueueA Size : 1024
HQueueA Len : 0
HQueueB Size : 1024
HQueueB Len : 0
OPQueueA Size : 1024
OPQueueA Len : 0
OPQueueB Size : 1024
OPQueueB Len : 0
InfoQueue Size : 1024
InfoQueue Len : 0
OPL-QueueA Size : 1024
OPL-QueueA Len : 0
OPL-QueueB Size : 1024
OPL-QueueB Len : 0
Q-QueueA Size : 1024
Q-QueueA Len : 20
Q-QueueB Size : 1024
Q-QueueB Len : 0
Caused by lua script using seralize..
Did a LoadFromFile("Settings.ini")
Settings.ini
tConfig = {
["Bot"] = "Elimator",
["SelfReg"] = 1, -- 1 for allow, nil for disallow self regging
["WarnFile"] = "Elimator/Warns.log",
["KickFile"] = "Elimator/Kicks.log",
["TopKickFile"] = "Elimator/TopKickers.dat",
["OfflineDir"] = "Elimator/Offline",
["RulesFile"] = "Elimator/Rules.txt"[color=red],[/color]
["MaxWarns"] = 3,
["MaxKicks"] = 3,
["AntiCmdFloodCount"] = 4000,
}
The , marked in red was what i forgot to write when i wrote the line.. One little , to cause a Crash...
I have also experienced this in the previous alpha (dunno whether fixed), whenever a script was erroneous on restart, it crashed.
Maybe this is that, since I did not get it so often.
---------------------------2005.07.18. 15:01:31---------------------------
Exception 'EAccessViolation' in module PtokaX.exe at 001B680D
Access violation at address 005B780D in module 'PtokaX.exe'. Read of address 00000021
Call stack:
:005B780D [PtokaX.exe]
:0058439F [PtokaX.exe]
:00545E9A [PtokaX.exe]
:77D66129 [USER32.dll]
:77D66175 [USER32.dll]
:77D48709 [USER32.dll]
Recursive call (2 times):
:77D66129 [USER32.dll]
:77D487EB [USER32.dll]
:77D48832 [USER32.dll]
:77D487FF [USER32.dll]
:77D66129 [USER32.dll]
:77D70494 [USER32.dll]
:77D487FF [USER32.dll]
:77D4C00E [USER32.dll]
:77D66129 [USER32.dll]
:77D4E366 [USER32.dll]
:77D66129 [USER32.dll]
:00587428 [PtokaX.exe]
:77D66129 [USER32.dll]
:0058439F [PtokaX.exe]
:77D4DCD1 [USER32.dll]
:77D4DCE0 [USER32.dll]
:7C90EAE3 [ntdll.dll]
:00587344 [PtokaX.exe]
:00512E45 [PtokaX.exe]
:00567709 [PtokaX.exe]
:00586FBF [PtokaX.exe]
:00586FD6 [PtokaX.exe]
:0051C1CA [PtokaX.exe]
:77D48709 [USER32.dll]
:77D487EB [USER32.dll]
:77D48832 [USER32.dll]
:77D487FF [USER32.dll]
:77D4EDA9 [USER32.dll]
:1007074A [nview.dll]
:005843E1 [PtokaX.exe]
:0058744D [PtokaX.exe]
:00545E9A [PtokaX.exe]
:0058439F [PtokaX.exe]
:77D4B3B4 [USER32.dll]
:77D4B3C4 [USER32.dll]
:7C90EAE3 [ntdll.dll]
:77D494E3 [USER32.dll]
:77D4DE6E [USER32.dll]
:005349CD [PtokaX.exe]
:005349F5 [PtokaX.exe]
:005349CD [PtokaX.exe]
:005349F5 [PtokaX.exe]
:00534CC7 [PtokaX.exe]
:00535E5D [PtokaX.exe]
:0046F60B [PtokaX.exe] LuaInterpret::~LuaInterpret () (luaInterface.cpp, line 4107)
:0053482C [PtokaX.exe]
:00587344 [PtokaX.exe]
:005B6D23 [PtokaX.exe]
:00438F3C [PtokaX.exe] THubCommands::DoCommand (HubCommands.cpp, line 1112)
:7C8399F3 [kernel32.dll]
:7C80B913 [kernel32.dll]
:1004E5A0 [nview.dll]
:7C90E57C [ntdll.dll]
:1004EB3A [nview.dll]
:00400000 [PtokaX.exe]
:7C80D051 [kernel32.dll]
:77D48AFE [USER32.dll]
:77D488A9 [USER32.dll]
:77D4B5FD [USER32.dll]
:77D4B62D [USER32.dll]
:77D70494 [USER32.dll]
:77D4B62D [USER32.dll]
:1006BAE8 [nview.dll]
:7C80B908 [kernel32.dll]
:7C80B913 [kernel32.dll]
:7C8399F3 [kernel32.dll]
:7C80B913 [kernel32.dll]
:1004E5D0 [nview.dll]
:7C80B908 [kernel32.dll]
:7C80B913 [kernel32.dll]
:1004E5D0 [nview.dll]
:7C90E03C [ntdll.dll]
:7C80CC41 [kernel32.dll]
:7C90D57D [ntdll.dll]
:7C809C5A [kernel32.dll]
:1004B98F [nview.dll]
:7C809C38 [kernel32.dll]
:1004EAF1 [nview.dll]
:7C80B908 [kernel32.dll]
:7C80B913 [kernel32.dll]
:7C90E57C [ntdll.dll]
:7C809C38 [kernel32.dll]
:1004ADAD [nview.dll]
:1004EAF1 [nview.dll]
:7C90EAE3 [ntdll.dll]
:77D494E3 [USER32.dll]
:77D66649 [USER32.dll]
:77D4C034 [USER32.dll]
:5D0A83B1 [COMCTL32.DLL]
:5D0A85C4 [COMCTL32.DLL]
:5D0A8594 [COMCTL32.DLL]
:5D0A859C [COMCTL32.DLL]
:77D4B9B2 [USER32.dll]
:5D0A859C [COMCTL32.DLL]
Main Thread ID = 00000BC0, Current Thread ID = 00000BC0
Registers:
EAX = 7FFFFFFF CS = 001B EIP = 005B780D Flags = 00010206
EBX = 00544C73 SS = 0023 ESP = 0012DFCC EBP = 0012E4F8
ECX = 00000000 DS = 0023 ESI = 0061465B FS = 003B
EDX = 00000021 ES = 0023 EDI = 00000020 GS = 0000
Code at CS:EIP
80 3A 00 75 EE E9 C9 00 00 00 F7 C7 00 01 00 00
Stack:
0012FE38 00579FB8 00544C04 77614C3C 656B614D
00000000 00000000 5D0A859C 00535E05 00E97E9C
005FE70B 00E9A0F8 0000000B 00000000 00ECE640
5D0A859C FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.1a [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 48, iParts: 45, iLogged: 3
NicklistLen : 80
OplistLen : 44
MyInfosLen : 280
MyInfosTagLen : 433
QueueA Size : 1024
QueueA Len : 0
QueueB Size : 1024
QueueB Len : 0
PQueue Size : 1024
PQueue Len : 0
HQueueA Size : 1024
HQueueA Len : 0
HQueueB Size : 1024
HQueueB Len : 0
OPQueueA Size : 1024
OPQueueA Len : 0
OPQueueB Size : 1024
OPQueueB Len : 0
InfoQueue Size : 1024
InfoQueue Len : 0
OQ-QueueA Size : 1024
OQ-QueueA Len : 48
OQ-QueueB Size : 1024
OQ-QueueB Len : 0
hai pkk
I doon't no if its a bugg in ptokax but a think so.
every time my hub has more then 600 users in wil be listed as -3 in dreamland hublist .
if a look at my logs everything seems to be ok .
i have lookt in the hub list en there where no ptokax hubs whit 600+ users
hope you can solve it
best regards Waarom
QuoteOriginally posted by (NL)waarom
hai pkk
I doon't no if its a bugg in ptokax but a think so.
every time my hub has more then 600 users in wil be listed as -3 in dreamland hublist .
if a look at my logs everything seems to be ok .
i have lookt in the hub list en there where no ptokax hubs whit 600+ users
hope you can solve it
best regards Waarom
This must be a dreamland error.
QuoteOriginally posted by madman
Caused by lua script using seralize..
Fixed :]
QuoteOriginally posted by bastya_elvtars
I have also experienced this in the previous alpha
Fixed, and btw thy you post in in bug reports of 0.3.3.21 ?( :D
Quote(NL)waarom
i have lookt in the hub list en there where no ptokax hubs whit 600+ users
If you check hublist.org, here is not much hubs running PtokaX with 600+ users X(
i have mailed them at dreamland they say -3 means pinger can not connect to the hub.
but in mij logs my hub is regd on dreamland whit more than 600 users so that seems to look ok
8-8-2005 21:29:19 - [REG] Hub is registered on dreamland.gotdns.org hublist (Users: 624, Share: 33840782509516)
QuoteOriginally posted by PPK
QuoteOriginally posted by bastya_elvtars
I have also experienced this in the previous alpha
Fixed, and btw thy you post in in bug reports of 0.3.3.21 ?( :D
I was offline for 2 months. Need to get rollin' again. :]
i have this version 0.3.3.21.nt.dbg
fall in a second until 250 user disconnect
why these problem '?
i have win 2 k sp4
350 user but until little time it makes I did not have problems
i have 1.5 mb/256 kb dsl
That solutions I have?
thanks bye
thanks cordial greetings bye
frmHub:GetPermBanList() returns nickbanned users' nick as sIP (not a big deal :P)
solution my problem ?
thanks bye
QuoteOriginally posted by bastya_elvtars
frmHub:GetPermBanList() returns nickbanned users' nick as sIP (not a big deal :P)
I know, is done to be used with new banlist... in actual it is done in crazy way, is not known if is ip ban or nick ban (and that is why is banlist too slow) :D
My problem is the robocop or the ptokax? it is possible it correct l' mistake I wait your news cordial greetings
OK i have a strange prob with new version 0.3.3.21 my op can kick user for fake shares etc no prob but when it a kick for clients thet hub soft keep disc my op every time they kick a user for a client so i went back to older 0.3.3.1 for time being as it really annoying especially for my op and me thanks. Cyborg
QuoteOriginally posted by sandi23
OK i have a strange prob with new version 0.3.3.21 my op can kick user for fake shares etc no prob but when it a kick for clients thet hub soft keep disc my op every time they kick a user for a client so i went back to older 0.3.3.1 for time being as it really annoying especially for my op and me thanks. Cyborg
That seems to be a bad RAW command. Please post the RAW.
With this ptokax I can't check with DCDM
[16:22:24] *** Checking started
[16:23:05] *** Disconnected
and everybody who checks has it in my hub
there is no way to set the new connection from same IP , maybe that's the problem ?(
if that's the problem: turn this off for a OP :]
with other ptokax we don't had problems with checking
thnx. Yvisaur
I got a nice one here - but it's to long to post here (approx 1 error window/second) until i quit it via task manager
Even though they r probably script related but i'll post it anyway :D
PtokaxDebug.log (http://www.psycho-chihuahua.net/PtokaxDebug.log)
i only had these scripts running -->
bastyas lawmaker
plops codeboard
the last bug in the list comes whenever i stop the hub.
Found the Problem, was an older Codeboard Version :D
QuoteOriginally posted by [NL]_Yvisaur
With this ptokax I can't check with DCDM
[16:22:24] *** Checking started
[16:23:05] *** Disconnected
and everybody who checks has it in my hub
Then DCDM have bug... PtokaX disconnect buggy clients :P
QuoteOriginally posted by PPK
Then DCDM have bug... PtokaX disconnect buggy clients :P
Bad settings by User is the bug. ?(
For a guess stop ConnectToMe spamming. ;)
QuoteOriginally posted by Pothead
Bad settings by User is the bug. ?(
Maybe... bad raw :D
QuoteOriginally posted by PPK
QuoteOriginally posted by Pothead
Bad settings by User is the bug. ?(
Maybe... bad raw :D
Yup, malformed raw's does cause the hub to disconnect you. Which is good. :)
DCDM works ok for me, this is the only raw i use:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[cheatingdescription]|<%[mynick]> %[mynick] is kicking %[nick] because: %[cheatingdescription]|$Kick %[nick]|
bad raw disconnects dcdm
---------------------------12/08/2005 02:04:51---------------------------
Exception 'EStackOverflow' in module WS2HELP.dll at 00000187
Stack overflow
Call stack:
:71AA1187 [WS2HELP.dll]
:71AB12A4 [WS2_32.dll]
:71ABF7EE [WS2_32.dll]
:01A64427 [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
:71AB1AB2 [WS2_32.dll]
:01A637E1 [nl_lsp.dll]
:01A6443A [nl_lsp.dll]
Main Thread ID = 00000C2C, Current Thread ID = 00000D54
Registers:
EAX = 006C8FC0 CS = 001B EIP = 71AA1187 Flags = 00010212
EBX = 77E75FAD SS = 0023 ESP = 01963000 EBP = 01963014
ECX = 006C8E98 DS = 0023 ESI = 006C8FBC FS = 0038
EDX = 0000002C ES = 0023 EDI = 0196305C GS = 0000
Code at CS:EIP
FF D3 8B 0E 8B F8 83 E7 01 85 C9 0F 84 65 11 00
Stack:
006C8FC0 00000002 0196305C FFFFFFFF 011DDA2C
00000000 00000000 01A6443A 00525E05 0174F340
005EC70B 011D2360 00000000 00000000 011FF3D4
01A6443A FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.21 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 1
Type : 1
iJoins: 55192, iParts: 55057, iLogged: 133
NicklistLen : 1685
OplistLen : 80
MyInfosLen : 9066
MyInfosTagLen : 12937
QueueA Size : 1024
QueueA Len : 0
QueueB Size : 1024
QueueB Len : 0
PQueue Size : 12031
PQueue Len : 0
HQueueA Size : 1024
HQueueA Len : 0
HQueueB Size : 1024
HQueueB Len : 0
OPQueueA Size : 1024
OPQueueA Len : 0
OPQueueB Size : 1024
OPQueueB Len : 0
InfoQueue Size : 1024
InfoQueue Len : 0
OPL-QueueA Size : 1024
OPL-QueueA Len : 0
OPL-QueueB Size : 1024
OPL-QueueB Len : 0
Q-QueueA Size : 1024
Q-QueueA Len : 0
Q-QueueB Size : 1024
Q-QueueB Len : 0
This one pisses me off, trying to keep my hub reliable! Died in my task bar and didn't leave a crash message.
Any idea on what caused it PPK?
nl_lsp.dll, is Layered Service Providing DLL of NetLimiter; which is a piece of software that can be inserted into the Windows TCP/IP handler like a link in a chain. Simply uninstall NetLimiter for a reliable hub. If your problem continues to occur, use LSPfix (http://www.cexx.org/lspfix.zip) to fix them.
QuoteOriginally posted by imby
Any idea on what caused it PPK?
It looks like never ending loop in netlimiter, don't know if is netlimiter or winsock bug X( Your debug report not contains anything from PtokaX, no fix possible from me :rolleyes:
When I call user:SendPM when user is nil, PtokaX crashes immediately without messages/reports.
QuoteOriginally posted by bastya_elvtars
When I call user:SendPM when user is nil
I know this problem few months, i only don't know how to fix it... i don't understant way how ptaczek get user object from lua and how to replace it with not crashing code :(
QuoteWhen I call user:SendPM when user is nil, PtokaX crashes immediately without messages/reports.
Does the same happen with user:SendData
QuoteOriginally posted by Optimus
Does the same happen with user:SendData
Problem is with any user:something X(
Hi folks
start a new Ptokaxhub on 0.3.3.21
and there is something strange
UL and DL seems to be almost the same
havent seen this before
-----------------------------------------------------------
CPU usage (60 sec avg): 0.05%
CPU time: 0:00:07
Mem usage (Old style): 1960 kB
Mem usage (Peak): 9.35 MB (9.36 MB)
VM size (Peak): 4.91 MB (4.92 MB)
------------------------------------------------------------
SendRests (Peak): 0 (0)
RecvRests (Peak): 0 (0)
Data sent: 4.47 MB
Data received: 4.04 MB
Tx (60 sec avg): 362 B/s (745 B/s)
Rx (60 sec avg): 412 B/s (612 B/s)
this cannot be correct
how to fix this - any idea ??
dont know if its a bug or something else
Of some reason I lost all contents in some of the cfg files
My question is if its possible to let ptoka create a backup file for those, replaced on a daily basis
else i have to do this manually and gives me a hell lot of extra work
when you minimize ptokax on to your worktray ... after a little while the usercount gets stuck
my user count is at the moment 463 in the hub and on the worktray its 339........ ?(
and when i look in ptokax.. ist correspons with de count in de hub........ little bug... ;)
regards...
QuoteOriginally posted by PPK
QuoteOriginally posted by bastya_elvtars
When I call user:SendPM when user is nil
I know this problem few months, i only don't know how to fix it... i don't understant way how ptaczek get user object from lua and how to replace it with not crashing code :(
Maybe this document will help (find me on icq if you need html): http://ptxscriptdb.psycho-chihuahua.net/download.php?view.81
This covers at least the lua part.
QuoteOriginally posted by BeeR
Hi folks
start a new Ptokaxhub on 0.3.3.21
and there is something strange
UL and DL seems to be almost the same
havent seen this before
-----------------------------------------------------------
CPU usage (60 sec avg): 0.05%
CPU time: 0:00:07
Mem usage (Old style): 1960 kB
Mem usage (Peak): 9.35 MB (9.36 MB)
VM size (Peak): 4.91 MB (4.92 MB)
------------------------------------------------------------
SendRests (Peak): 0 (0)
RecvRests (Peak): 0 (0)
Data sent: 4.47 MB
Data received: 4.04 MB
Tx (60 sec avg): 362 B/s (745 B/s)
Rx (60 sec avg): 412 B/s (612 B/s)
this cannot be correct
how to fix this - any idea ??
I don't see why this is unusual. From my experiences the upload tends to be significantly more when a noticable amount of bandwidth is being used. When there's not much activity in the hub both the upload and download tend to be pretty similar.
QuoteOriginally posted by ??~~~~Master~~~~??
and when i look in ptokax.. ist correspons with de count in de hub........ little bug... ;)
Please check next time accpt and parts count, from this is Ptokax get users...
QuoteOriginally posted by bastya_elvtars
When I call user:SendPM when user is nil, PtokaX crashes immediately without messages/reports.
Fixed :]
I think there is a problem with the random generator in 3.3.21. Every time the PtokaX is started, the random function generates the same numbers in the same order. I have noticed that on a trivia script, when the question began to repeat themselves on every restart. This behaviour began with version 3.3.21. Can you please look into this matter? Thank you for your efforts and keep up the good work!
QuoteOriginally posted by phorum
I think there is a problem with the random generator in 3.3.21. Every time the PtokaX is started, the random function generates the same numbers in the same order. I have noticed that on a trivia script, when the question began to repeat themselves on every restart. This behaviour began with version 3.3.21. Can you please look into this matter? Thank you for your efforts and keep up the good work!
For some reason, random stuff generated mear the main chunk is really the same on every usage. I will look into my test scripts, because the bot can (and should) be fixed.
hi
there seems to be problems with Ptokax and rdaddress
if i set a new adress it rd to that in ptokax.ini not that in hubsoft
i must change manual in .ini file so rd works in the network =(
should not Ptokax write to ptokax.ini direct when a change is made ??
as far as i know the hubsoft only saves to file when u close the Gui (or perhaps after a period of time - just a wild guess).
QuoteOriginally posted by BeeR
hi
there seems to be problems with Ptokax and rdaddress
if i set a new adress it rd to that in ptokax.ini not that in hubsoft
i must change manual in .ini file so rd works in the network =(
should not Ptokax write to ptokax.ini direct when a change is made ??
Get a script for it.
in the last 3 days 4-5 hubs crashed...... and on return the hole reglist and modt where gone in ptokax....
i've lost +- 350 regs....
....
QuoteOriginally posted by ??~~~~Master~~~~??
in the last 3 days 4-5 hubs crashed...... and on return the hole reglist and modt where gone in ptokax....
i've lost +- 350 regs....
....
Crashes are caused by erroneous scripts, I am longing for a new PtokaX release too. Probably a reg-backup script can help, request it in the appropriate thread.
does robo crash????? or the rc???
QuoteOriginally posted by ??~~~~Master~~~~??
does robo crash????? or the rc???
What is the RC? And every script is prone to crash, since they are made by humans.
standard rc... came with robo.. nothing unusual...
and yes humans make flaws ;)
QuoteOriginally posted by bastya_elvtars
QuoteOriginally posted by BeeR
hi
there seems to be problems with Ptokax and rdaddress
if i set a new adress it rd to that in ptokax.ini not that in hubsoft
i must change manual in .ini file so rd works in the network =(
should not Ptokax write to ptokax.ini direct when a change is made ??
Get a script for it.
yes i know but it must work to run a hub without a script ,,
i use that little rd-bot u helped me with (profiles 0 and 1) and it should work
ptokax must write to ini-file nomatter what script i use for setting hubs rdaddress
QuoteOriginally posted by ??~~~~Master~~~~??
in the last 3 days 4-5 hubs crashed......
And where is bug report with PtokaxDebug.log ?(
No report, no bugfix :P
hellu :]
about that post i did above (rd)
i use this little bot to change rdaddress
http://board.univ-angers.fr/thread.php?threadid=4392&boardid=26&styleid=1&sid=5896acefc765397fcf6a3e224820b365
and it works if i restart scripts after i changed rdaddress
any way to make it work without restart scripts ??
i'm trying to run a hub without a big hubscript
( i hope it should work to do it )
I'm not sure if this is a bug.
I may be doing something wrong, so please help me
I'm trying to wirgt some kind of HubList Server (a bit diferent from the ones I know, otherwise it wont be necessary to code).. and when I open a socket to comunicate with a PtokaX hub (0.3.3.21) I never get a response.
In the hub I got:
[19:30] (82.155.xxx.xxx) > $Key t??? A ????0wW??Ss Qp#CS?%?CbgD????1A?p|
[19:30] (82.155.xxx.xxx) > $BotINFO {HubListPinger}|
[19:30] x User removed: (Socket 508)
When I try to comunicate with SDCH Hubs, for exemple, everything goes fine and I got their response.
The sequence I'm using to comunicate with the hubs is:
Open a socket
Upon recive the command $Lock send the command $Key and send the command $BotINFO
After this I should receve a commmand $HubINFO, witch I never do with the PtokaX hubs.
Thanks
Try it like this...
QuoteHub: $Lock EXTENDEDPROTOCOL6AypFPFxLMmUfXXtlRR1v2ZF@^Dwin Pk=PtokaX|
Client: $Supports BotINFO|
Hub: $HubName ...|
Hub: $Supports HubINFO
Client: $BotINFO ...|
Hub: $HubINFO ...|
Client: $GetNickList|
Hub: $NickList ...|
Hub: $OpList ...|
QuoteHub: $Lock EXTENDEDPROTOCOL6AypFPFxLMmUfXXtlRR1v2ZF@^Dwin Pk=PtokaX|
Client: $Supports BotINFO|
Is'n it supose for the client to send $Key after receving the $Lock?
Well, you did it, you should know. I'll try your way.
Thanks
Edited.... later
Thanks PPK. I got what I wanted. My appoligizes for my desbelive. I should know that u knew :)
QuoteOriginally posted by Xico
Is'n it supose for the client to send $Key after receving the $Lock?
In old NMDC protocol yes, but we now use EXTENDEDPROTOCOL and PtokaX not need $Key if client send $Supports :))
i think i've got a very big problem , for one week ptokax crashes nearly every day and after that i often loose my connection and reboot is the only solution
here is the ptokaxdebug message :
---------------------------06/09/2005 13:06:05---------------------------
Exception 'ESocketError' in module PtokaX.exe at 000FB322
Windows socket error: Une op?ration sur un socket n'a pas pu ?tre effectu?e car le syst?me ne disposait pas de suffisamment d'espace dans la m?moire tampon ou parce que la file d'attente ?tait satur?e (10055), on API 'connect'
Call stack:
:004FC322 [PtokaX.exe]
:7C81EB33 [kernel32.dll]
:004FC322 [PtokaX.exe]
:00524C3B [PtokaX.exe]
:00526C86 [PtokaX.exe]
:005261D2 [PtokaX.exe]
Recursive call (2 times):
:004FC322 [PtokaX.exe]
:004FCABB [PtokaX.exe]
:004FC792 [PtokaX.exe]
:004FC7C2 [PtokaX.exe]
:004FD5BB [PtokaX.exe]
:00526080 [PtokaX.exe]
:004FD474 [PtokaX.exe]
:0050C13E [PtokaX.exe]
:77D18734 [USER32.DLL]
:77D18816 [USER32.DLL]
:77D185A4 [USER32.DLL]
:77D189CD [USER32.DLL]
:0050F9B7 [PtokaX.exe]
:77D196C7 [USER32.DLL]
:00566B58 [PtokaX.exe]
:00566B8F [PtokaX.exe]
:00566DAF [PtokaX.exe]
:00566DF2 [PtokaX.exe]
:00401B40 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005ADBBF [PtokaX.exe]
:00400000 [PtokaX.exe]
:7C816D4F [kernel32.dll]
:7C8399F3 [kernel32.dll]
Main Thread ID = 000009E4, Current Thread ID = 000009E4
Registers:
EAX = 0012FC24 CS = 001B EIP = 7C81EB33 Flags = 00000202
EBX = 00002747 SS = 0023 ESP = 0012FC20 EBP = 0012FC74
ECX = 00000000 DS = 0023 ESI = 0012FCA8 FS = 003B
EDX = 004FC322 ES = 0023 EDI = 00000000 GS = 0000
Code at CS:EIP
5E C9 C2 10 00 85 FF 0F 8E E6 D0 FE FF 8B 55 FC
Stack:
004FCAEC 0EEDFADE 00000001 00000000 7C81EB33
00000000 00000000 7C8399F3 00525E05 01D097B4
005EC70B 01D1DB34 0000000B 00000000 01332200
7C8399F3 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.21 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 5197, iParts: 5172, iLogged: 24
NicklistLen : 294
OplistLen : 100
MyInfosLen : 0
MyInfosTagLen : 2355
QueueA Size : 1024
QueueA Len : 0
QueueB Size : 1024
QueueB Len : 0
PQueue Size : 1024
PQueue Len : 0
HQueueA Size : 1024
HQueueA Len : 0
HQueueB Size : 1024
HQueueB Len : 0
OPQueueA Size : 1024
OPQueueA Len : 0
OPQueueB Size : 1024
OPQueueB Len : 0
InfoQueue Size : 1024
InfoQueue Len : 0
OPL-QueueA Size : 1024
OPL-QueueA Len : 0
OPL-QueueB Size : 1024
OPL-QueueB Len : 0
Q-QueueA Size : 1024
Q-QueueA Len : 0
Q-QueueB Size : 1024
Q-QueueB Len : 0
QuoteOriginally posted by Pedro?
i think i've got a very big problem
Is buggy borland component used for registering to hublist... disable "AutoRegister" on network page, sorry i am not able to fix it for next PtokaX version :(
QuoteOriginally posted by PPK
QuoteOriginally posted by Pedro?
i think i've got a very big problem
Is buggy borland component used for registering to hublist... disable "AutoRegister" on network page, sorry i am not able to fix it for next PtokaX version :(
hmm, but without the autoregister, peoples hubs wont get registered = no new user,
its surprising no one has reported this bug before. PPK, when do you think you can fix it?
(you said it was a borland problem, have they said anything about when they maybe have fixed the hub?)
thx for ur answer i disabled autoregister hope i could get new users anyway
i also got another bug but there is nothing about it in ptokaxdebug.log ptokax just doesn't answer anymore i'll tell you if it keeps on happening
Can't get rid of hublist pinger
hasnt had AutoRegister enabled in monts
still my hub is registrered
Is the only way to stop it bye mailing hublist.org?
QuoteOriginally posted by blackwings
hmm, but without the autoregister, peoples hubs wont get registered = no new user
In hublist.org you don't need to use register function in hub, you only add url to hub on hublist.org webpage and pinger do all other work...
QuoteOriginally posted by blackwings
its surprising no one has reported this bug before.
Is reported more times for more PtokaX versions, this one is on socket connect and here is another one (crashing more) on close socket X(
with prokax 1708 zion 1.14 and mdc 2.0 works fine but the 21 ptokax version anytime i check i got disconnected, wouldn't it be better to relaese a ptokax version when it is working ok instead of every moth a new version full with bugs?
QuoteOriginally posted by hutchenky
with prokax 1708 zion 1.14 and mdc 2.0 works fine but the 21 ptokax version anytime i check i got disconnected, wouldn't it be better to relaese a ptokax version when it is working ok instead of every moth a new version full with bugs?
Haven't you checked your brain before using your mouth? PtokaX disconnects some buggy client. If you wanted a real solution, instead of criticising, you would have posted a log from the admin chat or something similar, or at least a better description of the problem. Also, if you wanna join the dev team, PPK will surely allow, but first watch your words, and try to fix the bugs in your own brain before using it. What I mean is:
Quotebut the 21 ptokax version anytime i check i got disconnected
What does check mean?
Than explain to me why both 2 clients worked ok with 1708 and not with 21?
But problem with 1708 versie is a pop up screen saying access violation, this freeses ptokax.
And isn't this a board to report bugs?
QuoteOriginally posted by hutchenky
But problem with 1708 versie is a pop up screen saying access violation, this freeses ptokax.
And isn't this a board to report bugs?
If you got this then you should have a crash report.
what do you get told when you try to connect with the 2 clients?
Exception 'EAccessViolation' in module PtokaX.exe at 0009DA08
Access violation at address 0049EA08 in module 'PtokaX.exe'. Read of address 00000032
QuoteOriginally posted by hutchenky
Exception 'EAccessViolation' in module PtokaX.exe at 0009DA08
Access violation at address 0049EA08 in module 'PtokaX.exe'. Read of address 00000032
Post the contents of ptokaxdebug.log
---------------------------5-9-2005 0:00:42---------------------------
Exception 'EAccessViolation' in module PtokaX.exe at 0009DA08
Access violation at address 0049EA08 in module 'PtokaX.exe'. Read of address 00000032
Call stack:
:0049EA08 [PtokaX.exe] hashRegMan::Find (hashRegMan.cpp, line 183)
:004044AA [PtokaX.exe] ThubForm::CheckRegistered (frmHub.cpp, line 337)
:0049A423 [PtokaX.exe] cDcCommands::ValidateUserNick (DcCommands.cpp, line 3091)
:77D1882A [USER32.dll]
:77D1C63F [USER32.dll]
:7C9106EB [ntdll.dll]
:7C91056D [ntdll.dll]
:71A116A3 [wshtcpip.dll]
:71A2150C [WS2HELP.dll]
:016965B4 [nl_lsp.dll]
:719D44B0 [MSWSOCK.dll]
:0169293F [nl_lsp.dll]
:01693C20 [nl_lsp.dll]
:00494357 [PtokaX.exe] cDcCommands::ValidateNick (DcCommands.cpp, line 2381)
:0048B22D [PtokaX.exe] cDcCommands::Key (DcCommands.cpp, line 820)
:0048787E [PtokaX.exe] cDcCommands::ProcessData (DcCommands.cpp, line 290)
:71A34379 [WS2_32.dll]
:71A34382 [WS2_32.dll]
:71A52EA3 [WSOCK32.DLL]
:004518E8 [PtokaX.exe] clsUser::ProcessLines (clsUser.cpp, line 647)
:0045184A [PtokaX.exe] clsUser::DoRecv (clsUser.cpp, line 622)
:01695684 [nl_lsp.dll]
:005333EB [PtokaX.exe]
:00535382 [PtokaX.exe]
:0053336A [PtokaX.exe]
:005333EC [PtokaX.exe]
:005B0A43 [PtokaX.exe]
:00533270 [PtokaX.exe]
:00451BB8 [PtokaX.exe] clsUser::SetIP (clsUser.cpp, line 761)
:00459DF7 [PtokaX.exe] theLoop::AcceptUser (serviceLoop.cpp, line 210)
:005333EC [PtokaX.exe]
:005B0A65 [PtokaX.exe]
:00533270 [PtokaX.exe]
:77D18C3A [USER32.dll]
:00578AD4 [PtokaX.exe]
:77D18C4E [USER32.dll]
:00578AB2 [PtokaX.exe]
:0051FAA5 [PtokaX.exe]
:004598A2 [PtokaX.exe] theLoop::ProcessAccepts (serviceLoop.cpp, line 115)
:00459FAF [PtokaX.exe] theLoop::FOnTimer (serviceLoop.cpp, line 255)
:005A1EB1 [PtokaX.exe]
:005F7C0D [PtokaX.exe]
:77D2F3E3 [USER32.dll]
:0046E0CF [PtokaX.exe] LuaScriptsSet::GetGcInfo (luaInterface.cpp, line 4030)
:77D1EB3E [USER32.dll]
:746B0E6C [MSCTF.dll]
:00578B66 [PtokaX.exe]
:00578A4C [PtokaX.exe]
:0051AD66 [PtokaX.exe]
:77D18734 [USER32.dll]
:77D18816 [USER32.dll]
:77D189CD [USER32.dll]
:0051E5DF [PtokaX.exe]
:77D196C7 [USER32.dll]
:00575780 [PtokaX.exe]
:005757B7 [PtokaX.exe]
:005759D7 [PtokaX.exe]
:00575A1A [PtokaX.exe]
:00401B44 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005BE663 [PtokaX.exe]
:00400000 [PtokaX.exe]
:7C816D4F [kernel32.dll]
:7C8399F3 [kernel32.dll]
Main Thread ID = 00000DE8, Current Thread ID = 00000DE8
Registers:
EAX = 00E62630 CS = 001B EIP = 0049EA08 Flags = 00010212
EBX = 0000005B SS = 0023 ESP = 0012F8AC EBP = 0012F8BC
ECX = 0000001E DS = 0023 ESI = 00578B54 FS = 003B
EDX = 0000001E ES = 0023 EDI = 0012FE38 GS = 0000
Code at CS:EIP
8B 4A 14 8B 45 0C 3B 88 54 01 00 00 75 0B 8B 55
Stack:
0000005B 00E62630 0000005B 0000001E 0012F8D8
00000000 00000000 7C8399F3 00534A05 01C3EC00
005FD30B 00E7A120 0000000B 00000000 00E82844
7C8399F3 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.0 build 17.08 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 23597, iParts: 23512, iLogged: 84
NicklistLen : 964
OplistLen : 87
MyInfosLen : 7718
MyInfosTagLen : 7718
QueueA Size : 15
QueueA Len : 0
QueueB Size : 15
QueueB Len : 0
PQueue Size : 169
PQueue Len : 0
HQueueA Size : 97
HQueueA Len : 0
HQueueB Size : 69
HQueueB Len : 0
OPQueueA Size : 566
OPQueueA Len : 0
OPQueueB Size : 308
OPQueueB Len : 0
InfoQueue Size : 566
InfoQueue Len : 0
OQ-QueueA Size : 229
OQ-QueueA Len : 0
OQ-QueueB Size : 33
OQ-QueueB Len : 0
Oh, this is easy. Do not use NetLimiter.
i don't use netlimiter
I think it is a certain user connecting to the hub, maybe he got netlimiter, but i am not using my netlimiter for ages
QuoteOriginally posted by hutchenky
I think it is a certain user connecting to the hub, maybe he got netlimiter, but i am not using my netlimiter for ages
Have it installed?
Yes it is installed, so you know for sure my netlimiter causes the acces violation in 1708? if that is so i use the 1708 again instead of the 21, thnx mate
QuoteOriginally posted by hutchenky
Yes it is installed, so you know for sure my netlimiter causes the acces violation in 1708? if that is so i use the 1708 again instead of the 21, thnx mate
If you don't use it, uninstall it, cause your whole system will be unstable.
QuoteOriginally posted by hutchenky
Than explain to me why both 2 clients worked ok with 1708 and not with 21?
well, since 0.3.3.0 b17.09 and later, ptokax doesn't accept buggy $Supports from DC clients,
for example rmDC can't acces ptokax anymore because of its buggy $Supports.
btw nmdc v2 is a crappy old client, use DC++ instead. And Zion, its a OP client right, use DCDM++ instead of Zion.
With those changes, you can use 0.3.3.21 :)
QuoteOriginally posted by hutchenky
with prokax 1708 zion 1.14 and mdc 2.0 works fine but the 21 ptokax version anytime i check i got disconnected
Please enable CMDs in Users/Chat tab and post what this clients send... Maybe is bug in PtokaX and maybe is bug in bad protocol support in this clients :rolleyes: Zion is mod of StrongDC++, StrongDC++ is mod CZDC++ and CZDC++ is mod of DC++... nice way to create very buggy client :D
QuoteOriginally posted by hutchenky
wouldn't it be better to relaese a ptokax version when it is working ok instead of every moth a new version full with bugs?
Are you really sure that you don't want next 10 years new PtokaX version because will be always full of bugs ?( :D
And btw i release PtokaX always only when is working :P
damn finally a crash
--------------------------------
Access violation at address 77F5215E in module 'ntdll.dll'. Write of address 67676F66
Call stack:
:77F5215E [ntdll.dll]
:77F51FBF [ntdll.dll]
:71A423AE [MSWSOCK.dll]
:71AA19F7 [WS2_32.dll]
:71AA123A [WS2_32.dll]
:71AA1A1F [WS2_32.dll]
:00533BF0 [PtokaX.exe]
:00452640 [PtokaX.exe] clsUser::DoRecv (clsUser.cpp, line 517)
:0053406B [PtokaX.exe]
:77F82402 [ntdll.dll]
:00451590 [PtokaX.exe] clsUser::~clsUser (clsUser.cpp, line 163)
:0045A9C6 [PtokaX.exe] theLoop::ProcessAccepts (serviceLoop.cpp, line 96)
:0045B019 [PtokaX.exe] theLoop::FOnTimer (serviceLoop.cpp, line 236)
:0045B02C [PtokaX.exe] theLoop::FOnTimer (serviceLoop.cpp, line 238)
:005A214B [PtokaX.exe]
:005A2641 [PtokaX.exe]
:005A26D9 [PtokaX.exe]
:005F83DD [PtokaX.exe]
:0046ED18 [PtokaX.exe] LuaInterpret::GetGC (luaInterface.cpp, line 4136)
:0057938E [PtokaX.exe]
:00579274 [PtokaX.exe]
:0051B58E [PtokaX.exe]
:77D57B5B [USER32.dll]
:77D5CE12 [USER32.dll]
:77D34435 [USER32.dll]
:77D34D38 [USER32.dll]
:00575FA8 [PtokaX.exe]
:00575FDF [PtokaX.exe]
:005761FF [PtokaX.exe]
:00576242 [PtokaX.exe]
:00401B44 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005BEE77 [PtokaX.exe]
:00400000 [PtokaX.exe]
:77E962B6 [kernel32.dll]
Main Thread ID = 000005B8, Current Thread ID = 000005B8
Registers:
EAX = 67676F62 CS = 001B EIP = 77F5215E Flags = 00010206
EBX = 013E0000 SS = 0023 ESP = 0012FAF8 EBP = 0012FB04
ECX = 013E7380 DS = 0023 ESI = 01DAE000 FS = 003B
EDX = 01DAEBA0 ES = 0023 EDI = 01DAEBA0 GS = 0000
Code at CS:EIP
89 48 04 74 45 8A 47 05 A8 04 0F 85 92 A7 03 00
Stack:
013E0000 01DAEA98 00000001 0012FBD8 77F51FBF
00000000 00000000 77E962B6 00535205 01478FEC
005FDB0B 00EAFF84 0000000B 00000000 00EAF2C8
77E962B6 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.1 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 0
Type : 1
iJoins: 75307, iParts: 75102, iLogged: 204
NicklistLen : 3864
OplistLen : 140
MyInfosLen : 10253
MyInfosTagLen : 19132
QueueA Size : 1606
QueueA Len : 0
QueueB Size : 894
QueueB Len : 0
PQueue Size : 1720
PQueue Len : 0
HQueueA Size : 96
HQueueA Len : 0
HQueueB Size : 59
HQueueB Len : 0
OPQueueA Size : 291
OPQueueA Len : 0
OPQueueB Size : 223
OPQueueB Len : 0
InfoQueue Size : 148
InfoQueue Len : 0
OQ-QueueA Size : 1422
OQ-QueueA Len : 0
OQ-QueueB Size : 907
OQ-QueueB Len : 0
QuoteOriginally posted by uffetjur
Application Title : PtokaX DC Hub 0.3.3.1 [debug]
:rolleyes:
Hi all.
I too am running PtokaX v0.3.3.21 Debug and have noticed a problem. For some unknown reason Users seem to be dropping from my hub and not coming back. This seems to be only happening to non registered users. I am not sure if this is a bug relating to PtokaX or not but I have noticed this alot...
[12:32] (62.72.232.171) > $Key tA 0PGaE%b#7Gb7p|
[12:32] (62.72.232.171) > $ValidateNick (BBB)Bedz|
[12:32] (BBB)Bedz (62.72.232.171) > $Version 1,0091|
[12:32] (BBB)Bedz (62.72.232.171) > $GetNickList|
[12:32] (BBB)Bedz (62.72.232.171) > $MyINFO $ALL (BBB)Bedz <++ V:0.674,M:P,H:50/0/0,S:10>$ $DSL$$12439217189$|
[COLOR=red][12:32] x User removed: (BBB)Bedz (Socket 536)[/COLOR]
[12:32] (217.209.190.180) > $Supports UserCommand NoGetINFO NoHello UserIP2 TTHSearch GetZBlock |
[12:32] (217.209.190.180) > $Key tA 0 pq%@V6fap|
[12:32] (217.209.190.180) > $ValidateNick sosa|
[12:32] sosa (217.209.190.180) > $Version 1,0091|
[12:32] sosa (217.209.190.180) > $GetNickList|
[12:32] sosa (217.209.190.180) > $MyINFO $ALL sosa <++ V:0.670,M:A,H:267/0/0,S:1>$ $LAN(T1)$$14450102485$|
[COLOR=red][12:32] x User removed: sosa (Socket 536)[/COLOR]
[12:33] x User removed: (Socket 536) [12:36] watje (62.194.248.241) > $Version 1,0091|
[12:36] watje (62.194.248.241) > $GetNickList|
[12:36] watje (62.194.248.241) > $MyINFO $ALL watje <++ V:0.674,M:P,H:41/0/0,S:1>$ $LAN(T1)$$11299620743$|
[COLOR=red][12:36] x User removed: grimmyboy (Socket 536)
[12:36] x User removed: watje (Socket 728)[/COLOR]
[12:36] (84.47.46.55) > $Supports UserCommand NoGetINFO NoHello UserIP2 TTHSearch GetZBlock |
[12:36] (84.47.46.55) > $Key tA 0s/%DCN096%//%DCN096%/Pue &!p|
[12:36] (84.47.46.55) > $ValidateNick lubo|
[12:36] lubo (84.47.46.55) > $Version 1,0091|
[12:36] lubo (84.47.46.55) > $GetNickList|
[12:36] lubo (84.47.46.55) > $MyINFO $ALL lubo lubmar<++ V:0.674,M:A,H:33/0/0,S:1>$ $28.8Kbps$hms@stonline.sk$0$|
[COLOR=red][12:36] x User removed: lubo (Socket 728)[/COLOR]
I know some of these Users are ok as they are able to enter my YnHub without any problems... ?( My hub dropped around 50 decent users yesterday without any reasons as to why
QuoteOriginally posted by Metaphase
[12:32] (BBB)Bedz (62.72.232.171) > $MyINFO $ALL (BBB)Bedz <++ V:0.674,M:P,H:50/0/0,S:10>$ $DSL$$12439217189$|
[12:32] x User removed: (BBB)Bedz (Socket 536)
[12:32] sosa (217.209.190.180) > $MyINFO $ALL sosa <++ V:0.670,M:A,H:267/0/0,S:1>$ $LAN(T1)$$14450102485$|
[12:32] x User removed: sosa (Socket 536)
[12:36] watje (62.194.248.241) > $MyINFO $ALL watje <++ V:0.674,M:P,H:41/0/0,S:1>$ $LAN(T1)$$11299620743$|
[12:36] x User removed: watje (Socket 728)
[12:36] lubo (84.47.46.55) > $MyINFO $ALL lubo lubmar<++ V:0.674,M:A,H:33/0/0,S:1>$ $28.8Kbps$hms@stonline.sk$0$|
[12:36] x User removed: lubo (Socket 728)
Since they are being dropped straight after Myinfo string, i would assume, max hubs and /or min share.
I usually keep PtokaX minimized in SysTray like all the time. But I've noticed that from time to time it stop responding. I try to bring it on the desktop, to activate it clicking on the icon in the systray and it doesn't do anything. It just stand there. and it starts kicking silently all the users. I have to shut it down from the task manager and start it up again. I do not know if it is because of a script or what. That's why I'm posing the debug file so PPK can take a look on it. But it's too long to post here what can I do?. Thanks.
Debug file from the server (http://adasong.iespana.es/PtokaxDebug.log)
---------------------------15-9-2005 19:23:50---------------------------
Exception 'EAccessViolation' in module ntdll.dll at 000112BA
Access violation at address 7C9122BA in module 'ntdll.dll'. Read of address 697550F8
Call stack:
:7C9122BA [ntdll.dll]
:7C911BDC [ntdll.dll]
:7C9186FB [ntdll.dll]
:7C910ECA [ntdll.dll]
:77D18BD9 [USER32.dll]
:0053336A [PtokaX.exe]
:005333EC [PtokaX.exe]
:00533843 [PtokaX.exe]
:00450024 [PtokaX.exe] clsUser::~clsUser (?p) (clsUser.cpp, line 164)
:004598A2 [PtokaX.exe] theLoop::ProcessAccepts (serviceLoop.cpp, line 115)
:00459F0F [PtokaX.exe] theLoop::FOnTimer (serviceLoop.cpp, line 235)
:00459F25 [PtokaX.exe] theLoop::FOnTimer (serviceLoop.cpp, line 236)
:0046E698 [PtokaX.exe] LuaInterpret::GetGC (luaInterface.cpp, line 4128)
:004A2B02 [PtokaX.exe] luaD_call (ldo.c, line 314)
:004AE829 [PtokaX.exe] f_call (lapi.c, line 672)
:004A2E6F [PtokaX.exe] luaD_pcall (ldo.c, line 416)
:004AE80C [PtokaX.exe] lua_call (lapi.c, line 657)
:004AA1A9 [PtokaX.exe] luaH_get (ltable.c, line 472)
:004AE88C [PtokaX.exe] lua_pcall (lapi.c, line 685)
:004AE80C [PtokaX.exe] lua_call (lapi.c, line 657)
:77D1EB3E [USER32.dll]
:746B0E6C [MSCTF.dll]
:00578B66 [PtokaX.exe]
:00578A4C [PtokaX.exe]
:0051AD66 [PtokaX.exe]
:77D18734 [USER32.dll]
:77D18816 [USER32.dll]
:77D189CD [USER32.dll]
:0051E5DF [PtokaX.exe]
:77D196C7 [USER32.dll]
:00575780 [PtokaX.exe]
:005757B7 [PtokaX.exe]
:005759D7 [PtokaX.exe]
:00575A1A [PtokaX.exe]
:00401B44 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005BE663 [PtokaX.exe]
:00400000 [PtokaX.exe]
:7C816D4F [kernel32.dll]
:7C8399F3 [kernel32.dll]
Main Thread ID = 00000EB8, Current Thread ID = 00000EB8
Registers:
EAX = 00000380 CS = 001B EIP = 7C9122BA Flags = 00010287
EBX = 00000881 SS = 0023 ESP = 0012FAA4 EBP = 0012FAB0
ECX = 0000037F DS = 0023 ESI = 01780178 FS = 003B
EDX = 69755100 ES = 0023 EDI = 01F50000 GS = 0000
Code at CS:EIP
0F B7 5A F8 3B 5D 0C 72 07 8B C2 E9 01 FE FF FF
Stack:
01780000 00000AC2 01C29968 0012FAD4 7C911BDC
00000000 00000000 7C8399F3 00534A05 00E81D40
005FD30B 00DE5F68 0000000B 00000000 00E9A28C
7C8399F3 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.0 build 17.08 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 13505, iParts: 13345, iLogged: 160
NicklistLen : 1789
OplistLen : 87
MyInfosLen : 14305
MyInfosTagLen : 14305
QueueA Size : 15
QueueA Len : 0
QueueB Size : 15
QueueB Len : 0
PQueue Size : 183
PQueue Len : 0
HQueueA Size : 41
HQueueA Len : 0
HQueueB Size : 33
HQueueB Len : 0
OPQueueA Size : 372
OPQueueA Len : 0
OPQueueB Size : 651
OPQueueB Len : 0
InfoQueue Size : 197
InfoQueue Len : 0
OQ-QueueA Size : 229
OQ-QueueA Len : 0
OQ-QueueB Size : 65
OQ-QueueB Len : 0
---------------------------15-9-2005 23:21:11---------------------------
Exception 'EAccessViolation' in module ntdll.dll at 00010E58
Access violation at address 7C911E58 in module 'ntdll.dll'. Read of address 656E2120
Call stack:
:7C911E58 [ntdll.dll]
:7C910D5C [ntdll.dll]
:7C90FB6C [ntdll.dll]
:7C90FB71 [ntdll.dll]
:7C809392 [kernel32.dll]
:7C8404F8 [kernel32.dll]
:00450024 [PtokaX.exe] clsUser::~clsUser () (clsUser.cpp, line 164)
:71A363AA [WS2_32.dll]
:71A38A1D [WS2_32.dll]
:0045319A [PtokaX.exe] classUsers::DisconnectAll (colUsers.cpp, line 180)
:7C90EAE3 [ntdll.dll]
:77D3E162 [USER32.dll]
:77D18734 [USER32.dll]
:77D18BD9 [USER32.dll]
:77D1885A [USER32.dll]
:77D1882A [USER32.dll]
:77D194BE [USER32.dll]
:77D1B42D [USER32.dll]
:00588205 [PtokaX.exe]
:77D184FC [USER32.dll]
:77D185A4 [USER32.dll]
:77D1B3F9 [USER32.dll]
:77D18BD9 [USER32.dll]
:77D1B3CC [USER32.dll]
Recursive call (2 times):
:77D1B3A7 [USER32.dll]
:773D2FFE [COMCTL32.DLL]
:77D1BA46 [USER32.dll]
:77D1BB0A [USER32.dll]
:5B19153D [uxtheme.dll]
:77D18734 [USER32.dll]
:77D18BD9 [USER32.dll]
:77D1885A [USER32.dll]
:77D1882A [USER32.dll]
:7C9105C8 [ntdll.dll]
:7C910551 [ntdll.dll]
:7C91056D [ntdll.dll]
:77D1882A [USER32.dll]
:77D1C63F [USER32.dll]
:7C910D5C [ntdll.dll]
:7C910F46 [ntdll.dll]
:7C910D5C [ntdll.dll]
:7C910E91 [ntdll.dll]
Recursive call (2 times):
:7C91056D [ntdll.dll]
:7C910D5C [ntdll.dll]
:7C910E91 [ntdll.dll]
:7C91056D [ntdll.dll]
:7C911902 [ntdll.dll]
:7C91056D [ntdll.dll]
:719D41C6 [MSWSOCK.dll]
:719D41D5 [MSWSOCK.dll]
:7C91056D [ntdll.dll]
:71A31384 [WS2_32.dll]
:71A396A4 [WS2_32.dll]
:0041AC9B [PtokaX.exe] ThubForm::StopServer (frmHub.cpp, line 2322)
:77D50577 [USER32.dll]
:77D5052F [USER32.dll]
:0041EB42 [PtokaX.exe] ThubForm::FormClose (frmHub.cpp, line 2862)
:0056EDB1 [PtokaX.exe]
:005722EA [PtokaX.exe]
:00571501 [PtokaX.exe]
:005715AD [PtokaX.exe]
:00428CAF [PtokaX.exe] ThubForm::Dispatch (frmHub.h, line 802)
:00582F3B [PtokaX.exe]
:746B09A9 [MSCTF.dll]
:77D318F4 [USER32.dll]
:77D1EA9E [USER32.dll]
Recursive call (2 times):
:77D1EAAD [USER32.dll]
:77D30210 [USER32.dll]
:77D30220 [USER32.dll]
:7C90EAE3 [ntdll.dll]
:77D318A2 [USER32.dll]
:77D3E185 [USER32.dll]
:77D3E162 [USER32.dll]
:10013086 [asOEHook.dll]
:100130A3 [asOEHook.dll]
:00585EE0 [PtokaX.exe]
:00F21360 [MsgPlusLoader.dll]
:0056F57A [PtokaX.exe]
:0041F95C [PtokaX.exe] ThubForm::PxWndProc (frmHub.cpp, line 3316)
:00585B5B [PtokaX.exe]
:0051AD66 [PtokaX.exe]
:77D18734 [USER32.dll]
:77D18816 [USER32.dll]
:77D318F4 [USER32.dll]
:77D1B4C0 [USER32.dll]
:77D1B50C [USER32.dll]
:7C90EAE3 [ntdll.dll]
:77D194BE [USER32.dll]
:77D1B42D [USER32.dll]
:77D184FC [USER32.dll]
:77D1BA0E [USER32.dll]
:77D184FC [USER32.dll]
:77D185A4 [USER32.dll]
:77D1D598 [USER32.dll]
:5B193C20 [uxtheme.dll]
:5B1AE300 [uxtheme.dll]
:5B191AC7 [uxtheme.dll]
:5B19367A [uxtheme.dll]
:5B1AE2D5 [uxtheme.dll]
:77D2F134 [USER32.dll]
Main Thread ID = 00000EB8, Current Thread ID = 00000EB8
Registers:
EAX = 01BFC730 CS = 001B EIP = 7C911E58 Flags = 00010246
EBX = 01780000 SS = 0023 ESP = 0012EB20 EBP = 0012EB2C
ECX = 656E2120 DS = 0023 ESI = 01BFC728 FS = 003B
EDX = 020F7218 ES = 0023 EDI = 01C06F60 GS = 0000
Code at CS:EIP
8B 09 3B 4A 04 89 55 0C 0F 85 9D 00 00 00 3B C8
Stack:
01780000 01C06F60 00000001 0012EC00 7C910D5C
00000000 00000000 77D2F134 00534A05 00E12C08
005FD30B 018AC624 0000000B 00000000 00E33594
77D2F134 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.0 build 17.08 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 13505, iParts: 13381, iLogged: 124
NicklistLen : 1067
OplistLen : 80
MyInfosLen : 8247
MyInfosTagLen : 8247
QueueA Size : 15
QueueA Len : 0
QueueB Size : 15
QueueB Len : 0
PQueue Size : 183
PQueue Len : 0
HQueueA Size : 41
HQueueA Len : 0
HQueueB Size : 33
HQueueB Len : 0
OPQueueA Size : 372
OPQueueA Len : 0
OPQueueB Size : 651
OPQueueB Len : 0
InfoQueue Size : 197
InfoQueue Len : 0
OQ-QueueA Size : 229
OQ-QueueA Len : 0
OQ-QueueB Size : 1062
OQ-QueueB Len : 1062
QuoteOriginally posted by Paco
That's why I'm posing the debug file so PPK can take a look on it.
In your debug file is crash from 3 and 4 september caused by script :rolleyes:
QuoteOriginally posted by hutchenky
PtokaX DC Hub 0.3.3.0 build 17.08 [debug]
Name of thread is "
Post PtokaX DC Hub 0.3.3.21 bugs here!" ;)
I also tried to take a look inside and I also noticed theese dates but I really don't know what to tell you. maybe from PtpkaX point of view theese ar not crashes.
But I really don't know what to do in this situation that I've described you before.
When a program freezes and stops responding for me it's not clear what is the cause. First I thought it's probably the windows XP I'm using, but when the problem came back over and over again, I think maybe there is a problem when minimizing in systray, I don't know. What do you think?
I found problem in 0.3.3.21 causin deadlock -> PtokaX freeze :(
I didn't used now the options about minimizing in systray and it doesn't crash anymore.
I laso noticed that it has some problem when resizing. It does that very hard. I supose that this combined with restoring from systray could lead to a deadlock, an infinite operation or something. I am a vb programmer and i saw that before. Tell me if i'm right.
I disabled the systray option and now I have almost 3 days since I normally use PtokaX without that option and I have to tell you PPK that it has no problem at all. I am now preety sure that it may come from there the dead-lock. Hope now you can figure it out yourself exactly the source. Thanks.
-----------------------------------------------
That was yesterday. I was really happy thinking that I had found the bug. But today it happened the same thing without beeing activated that systray option. Now i really don't know what to say. I'm confused. ?(
Today after almost 6 hours from the last crash it crashed again. I'm begining to be really concerned.
I heard that PtokaX 0.326 testDrive is more crash free and I think I will downgrade this time.
Only I want to ask if that version 0.326 accepts my LUA5 script that i'm using right now on 0.3321. That's all. Thks.
Nop. only versions above/equal to 0.330 have lua5 support.
QuoteOriginally posted by Paco
Today after almost 6 hours from the last crash it crashed again. I'm begining to be really concerned.
I heard that PtokaX 0.326 testDrive is more crash free and I think I will downgrade this time.
Only I want to ask if that version 0.326 accepts my LUA5 script that i'm using right now on 0.3321. That's all. Thks.
it must be a buggy script that causes your crashes.
QuoteOriginally posted by Paco
I heard that PtokaX 0.326 testDrive is more crash free and I think I will downgrade this time.
That type of attiude doesn't help the developers in the slightest.
QuoteOriginally posted by Paco
Only I want to ask if that version 0.326 accepts my LUA5 script that i'm using right now on 0.3321. That's all. Thks.
***Edit *** Removed sarcastic comment, as i misread what Paco was asking for. :)
QuoteOriginally posted by Paco
Today after almost 6 hours from the last crash it crashed again. I'm begining to be really concerned.
Please post what scripts you are using. I am a medical student, and if i don't know which part of your body is painful, I cannot diagnose anything. Same goes here.
QuoteOriginally posted by Paco
I heard that PtokaX 0.326 testDrive is more crash free and I think I will downgrade this time.
OK, if you don't want to have topic support, want not to be on Hublist.org (since it does not support $BotINFO), want it to eat much more CPU and a lot more bandwidth, want to downgrade to lua4 versions of scripts and want not to be protected from flooders then feel free.
QuoteOriginally posted by Paco
Only I want to ask if that version 0.326 accepts my LUA5 script that i'm using right now on 0.3321. That's all. Thks.
A quote from Pothead: "Read the ChangeLog."
Ok it's fair enough.
---------------------------------------------------------------------
I wasn't sarcastic at all my friends. It's not my style and beside I really apreciate PtokaX. I am said as you are every time something it's not working right.
And yes downgrading doesn't help much a developer to progress in his work. But I don' t seem to pinpoint the problem and I need solutions, fast as I can not afford to restart server every 5-6 hours.
As for the scripts if you are a medical student friend bastya_elvtars, I hope you cand find the cure, as my few knowledges doesn't allow me.
For the sake of others PtokaX users I wish it would be a problematic script I messed up. Let's hope so. I'll try to post links to the script as soon as I upload them on a server.
---------------------------------------------------------------------
Thank you all for such short notice answears, because I know it was sunday. Thanks again
I succeeded in uploading today the scripts on a server. All of them are coming from this board and are final versions as this date and as I recall. Here are the links:
Trivia Bot 0.6... (http://adasong.iespana.es/triviabot.lua)
Censor Bot (http://adasong.iespana.es/censorbot.lua)
CustomRandomIntroScript (http://adasong.iespana.es/CustomRandomIntroScript.lua)
List Profile (http://adasong.iespana.es/listprofile.lua)
Clean Screen (http://adasong.iespana.es/CleanScreen.lua)
Micro Chatrooms (http://adasong.iespana.es/MicroChatrooms.lua)
OnlineFriends (http://adasong.iespana.es/OnlineFriends.lua)
WebStats (http://adasong.iespana.es/WebStats.lua)
---------------------------------------------------------------------
I only hope you have the patience to look through. Some of them are really simple and dummy, others are more complex. Thanks for looking into it.
QuoteOriginally posted by Pothead
***Edit *** Removed sarcastic comment, as i misread what Paco was asking for. :)
QuoteOriginally posted by Paco
I wasn't sarcastic at all my friends.
I regret to say i was. ?( On reading bastya_elvtars's post i realised that you hadn't asked what i thought you asked, and i was un-necessarly harsh, so i edited my post. :)
@Paco
Iam not a scripter but, i am wondering where are the credits from scripts... as we use scripts, we can keep those..
I knew that if I'll put inside version, author maybe bastya_elvtars will be influenced by that in analyzing a script or other, so I decided to post for him there just the code, as I completelly striped them of everything else as he should analyze the specific situation. I stripped even my coxde, that I've posted here about a Censor Bot.
I didn't want to start discussions about a script or other, a version or other. The situation in its perspective is that interest me.
I knew from the begining some of you will point me this aspect and I'm thanking you for that, but it wasn't, not even for one second a question of respecting or not the authors. I do respect them a lot as they do a great job every day, I just wanted to give you a chance of just analyzing the scripts without thinking of others aspects.
Thanks and hope I'll have your understanding on this matter.
Easy: disable the scripts one by one, and see what happens. I suggest disabling webstats and/or trivia.
I thought you would say that my friend. I did something better. I deleted all the scripts and closed the server and then started again the server.
Last time it crashed I had only 2 scripts running: the TRIVIA BOT and the microchatrooms bot, as they are like essentials for me.
Personally i suspect trivia but i'm not well documented and i shall not make an acusation of such kind.
I have read many times here about strange bugs that even the best scripter couldn't understand. I'm hoping is not the case and I'm not dealing with a freaky bug.
Thks. bastya_elvtars for your advices.
After 2 hours without nos scripts at all in the script list, and completely restarted it crashed again. People are sending me messages asking what happens and I'm really upset right now.
What is weird is that for PtokaX this is not a crash, it just stops responding as it is doing something and needs time. But the situation continues forever. And in the debug file everything looks clean.
PPK refered to a deadlock. It feels like it.
The scripts are fine and I thank now to all their authors for understanding.
Untill the problem will be resolved, I'll try to sort things out my way, keeping the server alive one way or another.
Thanks guys for all your help so far.
QuoteOriginally posted by Paco
After 2 hours without nos scripts at all in the script list, and completely restarted it crashed again. People are sending me messages asking what happens and I'm really upset right now.
What is weird is that for PtokaX this is not a crash, it just stops responding as it is doing something and needs time. But the situation continues forever. And in the debug file everything looks clean.
PPK refered to a deadlock. It feels like it.
The scripts are fine and I thank now to all their authors for understanding.
Untill the problem will be resolved, I'll try to sort things out my way, keeping the server alive one way or another.
Thanks guys for all your help so far.
What is the operating system? What is the machine architecture? What other proggies are you running?
I'm running the server on a P4 3.2, 512 Gb. DDR2, Windows XP Pro SP2.
I am investigating as we are speaking if I have a problem with my windows. We shall see.
Since than still no ansewars, only questions.
What is curious is that I had no problems with few users (100 max.). Problems started when I started to receive 200+ users.
And other thing. All the time when Ptoka crashed I was logged in the hub using different clients. Now I'm trying to see what happens if I don't connect at all to the hub from this address.
Are you using netlimiter?
anyway, it could be a setting in ptokax or a combination of settings, could you post the content of your PtokaX.ini ?
I don't know if combinations of PtokaX options could interfere with the clinet beeing used from the same connection.
What I do know is that I have used DC++ 0.674 (server crashed), Strong DC RC10 (server crashed). Strong didn't had the limiter function activated.
Now I'm only using PeerWeb DC++ wich seems more reliable in my situation.
And so far I haven't had no crash in more than 8 hours with scripts running on it (TRIVIA, ChatRooms, Censor).
I'm hoping this will last as with all the problems I've establis yoday a new record of users on the hub and share.
Here it is the PtokaX INI File:
INI file of PtokaX 0.3.3.21 (http://adasong.iespana.es/PtokaX_copy.ini)
Paco try downgrade to 0.3.3.1, maybe it help :rolleyes:
After more then 16 hours no crash with PtokaX 0.3.3.21
The secret? Simple.
I am using as client PerrWeb DC++.
I've changed the order of the script, actually I haven't change anything, but before I was using a different order than the one of actual files in the folder Scripts. Now I'm just letting them be in the phisical order they are on the disk.
Also for my 200+ users I've changed the value max users to 2000 so I shouldn't have no problems from here either.
I also added other script so I can test the server in overload situations and I can say so far it works perfect.
In the end I guess it was something misterious that only some1 who knows the real conditions of enviroment and the actual code of PTokaX can explain. (not the case here)
All good so far, keep up the good work guys. :)
If further problems be sure I'll post them here.
Hello
I have a small question ...
I have a hub whose working under Ptokax 0.326 but i have more and more problems with it. I want to replace it by the last ptokax 0.3.3.21 but he dont accept all clients (Black DC, ... ) With Zion++ he accept the reg and VIP, but the operator and master are disconnected every time.
With DC++ its ok.
How can i desactivated the blocking of these clients ?(
Thank you for your answers.
PS : I'm a french user, sorry for my bad english ;)
dunno how the tags looks like for blackdc and zion++, but if they dont have this in the beginning = <++
then their tag needs to be added to ClientTags.xml.
In Tab Rules you have in the right option group called: Users without DC tag.
Normally if you choose there the option Accept you shouldn't have any problems.
I have this option activated also and I receive people with all kinds of clients on the hub, and neither oen of them hasn't complained about not beeing able to connect.
As for the answear of blackwings I didn't knew that aspect.
Do you also know if I can find somewhere a list updated of this client tags?
Today I have reached a conclusion about my problem.
I have diagnosticated my computer for software and hardware problems and it's working just fine, full speed.
In the morning the server crashed again.
After that I thaught of doing something new. I minimized the server and I haven't touched it for more then 16 hours.
From time to time I was connecting through PeerWeb DC++ to see if it's working or not.
I had no problems at all with it.
So I guess we are coming back to the discussion about a possible dead lock. Where? As far as I know from my experience so far I recomend to all hub owners of PtokaX 0.3.3.21 to set up the hub options and scripts, to activate the option minimize in systray and to just let it be there, and try not to restore it too many times, because for me the cause consist in event restore, gain focus, resize or something like that, as I don't know as it is refered in the code.
I hope PPK that the problem is a little bit more clear now, and let's hope the solution is simple, as there never is.
Thanks paco...
In the rules, users without DC tags is accepted.
The probleme is that a Z++ client can enter the hub if he was a user, reg or VIP, but if he was an operator or more, he was disconnected.
Moreover, some clients than BDC cant connect the hub :
[00:45]
Connecting to xxx.xxx.xxx.xxx
[00:45] Successfully connected to xxx.xxx.xxx.xxx
[00:45] Disconnected from Hub.
With a Z++ client, and OP or Master :
[23:08:11] *** Connect?
[23:08:16] This hub is running PtokaX DC Hub 0.3.3.21 [debug] (UpTime: 0 days, 0 hours, 4 minutes)
[23:08:16] Hub Test
[23:08:16] *** Disconnected
Thanks.
QuoteOriginally posted by Dual_Shock
Thanks paco...
In the rules, users without DC tags is accepted.
The probleme is that a Z++ client can enter the hub if he was a user, reg or VIP, but if he was an operator or more, he was disconnected.
Moreover, some clients than BDC cant connect the hub :
[00:45] Connecting to xxx.xxx.xxx.xxx
[00:45] Successfully connected to xxx.xxx.xxx.xxx
[00:45] Disconnected from Hub.
With a Z++ client, and OP or Master :
[23:08:11] *** Connect?
[23:08:16] This hub is running PtokaX DC Hub 0.3.3.21 [debug] (UpTime: 0 days, 0 hours, 4 minutes)
[23:08:16] Hub Test
[23:08:16] *** Disconnected
Thanks.
BlackDC sends $ClientID or something like it which is unknown. Z++ is buggy, reported before.
No DC tag, does it mean no tag at all, or no DC++ tag aka <++, which doesn't allow users who don't have dc++???
QuoteOriginally posted by blackwings
No DC tag, does it mean no tag at all, or no DC++ tag aka <++, which doesn't allow users who don't have dc++???
BlackDC has absolutely no tag.
QuoteOriginally posted by bastya_elvtars
QuoteOriginally posted by blackwings
No DC tag, does it mean no tag at all, or no DC++ tag aka <++, which doesn't allow users who don't have dc++???
BlackDC has absolutely no tag.
I wasn't asking if BlackDC had a tag, I was asking what the No DC tag function meant, clarify what it meant.
Ok thanks ... i stay with 0.326, but i go to test testdrive 4.99 (i have testdrive4 actualy)
QuoteOriginally posted by Dual_Shock
Ok thanks ... i stay with 0.326, but i go to test testdrive 4.99 (i have testdrive4 actualy)
why, because you want to have blackdc and zion?? Change to something new, people always keeps using the old once :P
No problems with actual Zion++ here :rolleyes:
Quote[2005-09-22 03:18:04] <_@o'> *** Nick: ziontest IP: 127.0.0.1 Mode: A Hubs: 1 Slots: 1 Client: Zion++ Ver.: 1.15
Now I have more than 40 hours and PtokaX 0.3.3.21 hasn't crashed at all with a bunch of scripts installed.
I did what I sa?d above and didn't have no problem so far.
But can you please detail PPK the dead-lock what was about so we can avoid the contact with it? Thks.
QuoteOriginally posted by Paco
Now I have more than 40 hours and PtokaX 0.3.3.21 hasn't crashed at all with a bunch of scripts installed.
I did what I sa?d above and didn't have no problem so far.
But can you please detail PPK the dead-lock what was about so we can avoid the contact with it? Thks.
I have had it running for a week without any problems ;)
when playing with inbuild http server . we noticed this..
<--CHATLINE14-->
<--CHATLINE13-->
<-- etc. etc. -->
Seem to only give us lines starting with a "special chararacter" .. e.g.
"@", "_", "+", "!", "^" etc. etc.
guess it should work just the other way around..
-----------------------------------------------------------------
"....., and that spectrum is virtually endless,
and we are just penetrating other parts of that
consciousness spectrum with this human mind."
from: Cosmosis 'The First Step'
--------------------------------------------------------------------------
<-=D*S*N*PtokaX=-> ScriptList:
- [ 0 ] z.botinfo_ppk.lua
- [ 1 ] z.block_dl-sr-pm_fromnonregged.lua
- [ 1 ] Pervadverizer-kicker-banner.lua
- [ 1 ] !links.lua
- [ 1 ] !kick&!warn_uv.1.lua
- [ 1 ] a.z.elfs.lua
- [ 1 ] a.z.randomintro_uv.lua
- [ 1 ] a.z.userhubtime_lua5_.lua
- [ 1 ] cleanerX9.lua
- [ 1 ] cleanerX9_r.lua
- [ 1 ] cleanerX9_v&o.lua
- [ 1 ] OffllineMessage-0.3.lua
- [ 1 ] hollyhelpslua5.lua
- [ 1 ] graphbot.lua
- [ 0 ] Headerscroller.1.lua
- [ 1 ] selfregger.lua
- [ 1 ] tagsetter.lua
- [ 1 ] useropcomextra.lua
- [ 1 ] listclock_lua5.lua
- [ 1 ] z.botdescriptions.lua
- [ 1 ] pxstats.lua
- [ 1 ] botrevenge.lua
- [ 1 ] usercommands.lua
- [ 1 ] GeoIP-0.5.lua
- [ 1 ] a.z.wordremplace_uv.lua
- [ 1 ] z.searchengineblocker_uv.lua
- [ 1 ] 3xbadpascleaner_silent.v1.lua
- [ 1 ] no-hash-no-donkey.lua
- [ 1 ] AsyncWhois.lua
<-=D*S*N*PtokaX=->
------------------------------------------------------------
Current stats:
------------------------------------------------------------
Version: PtokaX DC Hub 0.3.3.21 [debug] built on Aug 1 2005 04:03:42
Uptime: 2 days, 19 hours, 47 minutes
Users (Max/Actual Peak (Max Peak)/Logged) : 234 / 168 (168) / 111
Chat messages: 851 x
Unknown commands: 44 x
PM commands: 1121 x
Key commands: 20009 x
Supports commands: 21001 x
MyINFO commands: 70469 x
ValidateNick commands: 19345 x
GetINFO commands: 2309 x
Password commands: 645 x
Version commands: 11770 x
UserIP commands: 24643 x
GetNickList commands: 11606 x
Search commands: 50139 x
SR commands: 9233 x
CTM commands: 44995 x
RevCTM commands: 50796 x
BotINFO commands: 39 x
------------------------------------------------------------
CPU usage (60 sec avg): 1.20%
CPU time: 0:37:06
Mem usage (Old style): 2794 kB
Mem usage (Peak): 25.14 MB (32.32 MB)
VM size (Peak): 24.44 MB (32.97 MB)
------------------------------------------------------------
SendRests (Peak): 0 (81)
RecvRests (Peak): 0 (2)
Data sent: 1.92 GB
Data received: 238.45 kB
Tx (60 sec avg): 0 B/s (8.60 kB/s)
Rx (60 sec avg): 0 B/s (94 B/s)
n.b.
last reboot was because of some dumb windows update !
here 0.3.3.21 [debug] built has not crashed even once .. :0)
and max uptime was three weeks or something..
(unattended i was on holiday two weeks of those :0)
so thanks thanks and more thanks
--- GREAT WORK ALL -----
'And as the gods have given us, so we return the gift.'
from: Cosmosis - 'Afterglow'
------------------------------------------------------------------------
http://ptxscriptdb.psycho-chihuahua.net/e107_plugins/bugtracker/bugtracker.php?show.1
Hello.My problem: normal user send +rules main chat.
Not reply.And other command not work in mainchat.Only bot pm.Someone know what the problem?Enabled text files support. potokax/texts/rules.txt
Pm work but main chat not work.Options/reply command in pm not ON.
QuoteOriginally posted by stageline
Hello.My problem: normal user send +rules main chat.
Not reply.And other command not work in mainchat.Only bot pm.Someone know what the problem?Enabled text files support. potokax/texts/rules.txt
Pm work but main chat not work.Options/reply command in pm not ON.
You should make sure that + is included in prefix list, this is not (crapp)YHub.
huh?
potokax/texts/+rules.txt ?
:D
QuoteOriginally posted by stageline
huh?
potokax/texts/+rules.txt ?
:D
What version are you using?
Sorry, but:
Szerintem t?l r?gi verzi?t haszn?lsz.
After +20 days
---------------------------1.10.2005 8:03:47---------------------------
Exception 'EAccessViolation' in module ntdll.dll at 00010F6C
Access violation at address 7C911F6C in module 'ntdll.dll'. Read of address 04FF0005
Call stack:
:7C911F6C [ntdll.dll]
:7C93040A [ntdll.dll]
:7C93040C [ntdll.dll]
Recursive call (2 times):
:7C9106EB [ntdll.dll]
:7C934370 [ntdll.dll]
Recursive call (3 times):
:7C9106EB [ntdll.dll]
:7C910551 [ntdll.dll]
:7C91056D [ntdll.dll]
:0023908C [PXLUA.DLL] luaM_realloc (lmem.c, line 84)
:0023C4F6 [PXLUA.DLL] newlstr (lstring.c, line 52)
:0023C671 [PXLUA.DLL] luaS_newlstr (lstring.c, line 86)
:0023D3DC [PXLUA.DLL] luaT_init (ltm.c, line 38)
:0023C0CF [PXLUA.DLL] f_luaopen (lstate.c, line 119)
:002351F7 [PXLUA.DLL] luaD_rawrunprotected (ldo.c, line 88)
:002351E9 [PXLUA.DLL] luaD_rawrunprotected (ldo.c, line 87)
:0023C32A [PXLUA.DLL] lua_open (lstate.c, line 189)
:0023BF45 [PXLUA.DLL] freestack (lstate.c, line 83)
:00474F98 [PtokaX.exe] LuaInterpret::LuaInterpret (H
l) (luaInterface.cpp, line 4655)
:005E6491 [PtokaX.exe]
:004748F8 [PtokaX.exe] LuaScriptsSet::StartScript (luaInterface.cpp, line 4459)
:005384B6 [PtokaX.exe]
:00421BF0 [PtokaX.exe] ThubForm::ScriptFilesClickCheck (frmHub.cpp, line 3609)
:77D4B4CB [USER32.DLL]
:77D4B50C [USER32.DLL]
:77D4D83F [USER32.DLL]
:77D4D82A [USER32.DLL]
:004EBCE9 [PtokaX.exe]
:004EBF03 [PtokaX.exe]
:004EBEE3 [PtokaX.exe]
:005728A0 [PtokaX.exe]
:004EBE37 [PtokaX.exe]
:005738BF [PtokaX.exe]
:0057390B [PtokaX.exe]
:00539842 [PtokaX.exe]
:00573B67 [PtokaX.exe]
:0057364F [PtokaX.exe]
:00502A4C [PtokaX.exe]
:00592037 [PtokaX.exe]
:77D4EB3E [USER32.DLL]
:0627265F [SSSensor.dll]
:77D618F4 [USER32.DLL]
:77D4EA9E [USER32.DLL]
:77D4EAAD [USER32.DLL]
:005569B9 [PtokaX.exe]
:77D4EAAD [USER32.DLL]
:77D4EBF3 [USER32.DLL]
:77D4EC03 [USER32.DLL]
:00576458 [PtokaX.exe]
:005765F4 [PtokaX.exe]
:77D6E162 [USER32.DLL]
:005397CB [PtokaX.exe]
:0057626F [PtokaX.exe]
:0050B47A [PtokaX.exe]
:77D48734 [USER32.DLL]
:77D48816 [USER32.DLL]
:77D489CD [USER32.DLL]
:0050ECF3 [PtokaX.exe]
:77D496C7 [USER32.DLL]
:00565E94 [PtokaX.exe]
:00565ECB [PtokaX.exe]
:005660EB [PtokaX.exe]
:0056612E [PtokaX.exe]
:00401B40 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005ACEFB [PtokaX.exe]
:00400000 [PtokaX.exe]
:7C816D4F [kernel32.dll]
:7C8399F3 [kernel32.dll]
Main Thread ID = 00000930, Current Thread ID = 00000930
Registers:
EAX = 018A0101 CS = 001B EIP = 7C911F6C Flags = 00010206
EBX = 018A0000 SS = 0023 ESP = 0012F748 EBP = 0012F968
ECX = 01977838 DS = 0023 ESI = 01977830 FS = 003B
EDX = 04FF0005 ES = 0023 EDI = 021BADD8 GS = 0000
Code at CS:EIP
8B 12 3B 57 04 0F 85 F3 23 02 00 3B D1 0F 85 EB
Stack:
00000009 004EBEE8 00533EB4 7C93040A 7C93040C
00000000 00000000 7C8399F3 00525105 011E4BE4
005EBB0B 025FA9C0 0000000B 00000000 02CBC43C
7C8399F3 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.21b [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 17794, iParts: 17612, iLogged: 72
NicklistLen : 735
OplistLen : 750
MyInfosLen : 3841
MyInfosTagLen : 0
QueueA Size : 4351
QueueA Len : 3915
QueueB Size : 2047
QueueB Len : 0
PQueue Size : 1024
PQueue Len : 0
HQueueA Size : 1024
HQueueA Len : 0
HQueueB Size : 1024
HQueueB Len : 0
OPQueueA Size : 1024
OPQueueA Len : 181
OPQueueB Size : 1024
OPQueueB Len : 0
InfoQueue Size : 1024
InfoQueue Len : 0
OPL-QueueA Size : 1024
OPL-QueueA Len : 0
OPL-QueueB Size : 1024
OPL-QueueB Len : 0
Q-QueueA Size : 1279
Q-QueueA Len : 0
Q-QueueB Size : 1279
Q-QueueB Len : 0
:00421BF0 [PtokaX.exe] ThubForm::ScriptFilesClickCheck (frmHub.cpp, line 3609)
:004748F8 [PtokaX.exe] LuaScriptsSet::StartScript (luaInterface.cpp, line 4459)
:005384B6 [PtokaX.exe]
You start new script...
:00474F98 [PtokaX.exe] LuaInterpret::LuaInterpret (H
l) (luaInterface.cpp, line 4655)
:005E6491 [PtokaX.exe]PtokaX try to start this script...
:0023908C [PXLUA.DLL] luaM_realloc (lmem.c, line 84)Lua try to allocate memory for this script...
:7C911F6C [ntdll.dll]
:7C93040A [ntdll.dll]
:7C93040C [ntdll.dll]
Recursive call (2 times):
:7C9106EB [ntdll.dll]
:7C934370 [ntdll.dll]
Recursive call (3 times):
:7C9106EB [ntdll.dll]
:7C910551 [ntdll.dll]
:7C91056D [ntdll.dll]And ntdll crash PtokaX, i don't know how or why :( And i am not able to fix it :rolleyes:
QuoteAnd i am not able to fix it
If you can't fix it.... who able for fix? :P
QuoteOriginally posted by 6Marilyn6Manson6
QuoteAnd i am not able to fix it
If you can't fix it.... who able for fix? :P
Since it comes from LUA badly assigning memory, i should hope the LUA authors. :)
QuoteOriginally posted by Pothead
QuoteOriginally posted by 6Marilyn6Manson6
QuoteAnd i am not able to fix it
If you can't fix it.... who able for fix? :P
Since it comes from LUA badly assigning memory, i should hope the LUA authors. :)
Ok Ok I understand :P:P
QuoteOriginally posted by Pothead
Since it comes from LUA badly assigning memory
No this is not bug in lua, crash is on this line...
block = HeapAlloc(hLuaHeap, HEAP_NO_SERIALIZE, size);
This code is changed from original lua package, because without heaps it leaking memory :(
It looks more like Windows problem :rolleyes:
Of some reason, I got one or more ghost nick in userlist
this occurs in Userlist and belongs to keyd users former nicks
If an op / mod / ma /owner change hes nick after a short time hes earlier nick shows up in userlist and only way to drop it is to restart hubsoft
And as i can remember this didnt happend with earler versions of ptokax
running Ptokax 3.2.2.21
scripts: Robocop 10.01e
zRightclicker.lua
freshstuff 3.4.3.lua
textmain.lua
iplogger.lua
Hy there.
If i close program: http://dchelp.no-ip.org/bug.txt this .lua problem? I use IpdbBot.script using 5 MB ram. :rolleyes: and px webstat lua use 4 MB ram. :-/ Hub lag 4 sec
etc... :D Someone know nice IP log script?
QuoteOriginally posted by uffetjur
ghost nick in userlist
This is a bug and it is reported and fixed in current beta phases
Fixed: Bug in lua and hubcommand to del reg user (thx GeceBekcisi for report).[/COLOR]
QuoteOriginally posted by stageline
I use IpdbBot.script using 5 MB ram. :rolleyes: ... Hub lag 4 sec
I faced a lot of problems after releasing v2 resulting stop working on it. As soon as possible, when I have enough time to test and complete it, v3 is on its way.
Also, 5 MiB mem usage is nothing.. If you think hub is lagging because of IPdbBOt, try disabling DNSLookup ;)
Fixed a few IPInfo errors (Thx Myers for reporting, Mateci for fixing) on 04.09.2005, v.2.11
Added database cleaner (As requested by Herman) on 10.09.2005, v.2.20
Added a function for showing users from same ISPs on 10.09.2005, v.2.21
Changed IPHistory result structure, now returning last 10 times in date order as default on 10.09.2005, v.2.22
Changed database saving on interval default value to off and default interval to 1 day on 10.09.2005, v.2.23
Changed database saving algorithym on 17.09.2005, v.2.4
Added an autosense mechanism for database cleaner, on 17.09.2005, v.2.5
Fixed lots of stuff, should check the code for differences on 17.09.2005, v.2.6
Added bad ISPs blocking on 22.09.2005, v.2.7
[/COLOR]
Thanks for information GeceBekcisi
Gone some times sense last betarelease, would be nice to see a changelog for what is done so far and this would also update us on bugs reported and fixed
QuoteOriginally posted by uffetjur
would be nice to see a changelog for what is done so far and this would also update us on bugs reported and fixed
Updated changelog is in WikiPx (http://www.ptxwiki.psycho-chihuahua.net/doku.php/changelogs/ptokax/changes_after_0.330_15.31) ;)
Now I see what we have to expect :)))
especially this is most wanted :
Added: !rangeban , !fullrangeban .
would be nice if we in the future could get
!allowrange
as an alternativ for us who runs hubs in local areas and wants to keep other out
QuoteOriginally posted by uffetjur
would be nice if we in the future could get
!allowrange
as an alternativ for us who runs hubs in local areas and wants to keep other out
Better use a firewall for that purpose:
allow all to hubip tcp:411 from int_net
allow all to hubip tcp:secondport from int_net
block all to hubip:411
block all to hubip:secondport
it would be nice to make the ptokax stabile..... with searching... i'm experiencing trubbles.. when my hub exeeds 700 peeps.... when somebody searches...... many people will drop... can there be a build in search locker or somting like that......... instead of regs only search.....or limited the amount of searching....
and there another thind....... dreamland hublist would not recognize my hub when it exeeds 600 users... when i exeed 600 users this hublist wil give me a user count of -3....... maybe that could be fixed aswell.....
many thanx in advage
QuoteOriginally posted by ??~~~~Master~~~~??
it would be nice to make the ptokax stabile..... with searching... i'm experiencing trubbles.. when my hub exeeds 700 peeps.... when somebody searches...... many people will drop... can there be a build in search locker or somting like that......... instead of regs only search.....or limited the amount of searching....
See the Deflood tab. Also consider using ActiveChecker.
QuoteOriginally posted by ??~~~~Master~~~~??
and there another thind....... dreamland hublist would not recognize my hub when it exeeds 600 users... when i exeed 600 users this hublist wil give me a user count of -3....... maybe that could be fixed aswell.....
As far as I can recall, this is an error on dreamland's end.
QuoteSee the Deflood tab. Also consider using ActiveChecker.
i've allready tryed all kinds of configs.....nothing seems to be working fine....
need more info on that activechecker plzzz
Quotewhen i exeed 600 users this hublist wil give me a user count of -3....... maybe that could be fixed aswell.....
I am not able to fix something if i don't know where is problem, as i know -3 is hublist bug :rolleyes:
QuoteI am not able to fix something if i don't know where is problem, as i know -3 is hublist bug
basta told me already... if you never ask you don't get any anwsers ;)
but that's a hublist problem???? why is it then when i switch to ynhub.. they wil ping correctly?? is this problem only with ptokax at dreamland?
Its same for me and a lot of others its when reash over 600 users it show -3 But only dreamland hublist.
And its only when using ptokax i tryed other prog and then its OK
T
Zitat:
--------------------------------------------------------------------------------
Originally posted by uffetjur
would be nice if we in the future could get
!allowrange
as an alternativ for us who runs hubs in local areas and wants to keep other out
--------------------------------------------------------------------------------
Better use a firewall for that purpose:
code:--------------------------------------------------------------------------------allow all to hubip tcp:411 from int_net
allow all to hubip tcp:secondport from int_net
block all to hubip:411
block all to hubip:secondport--------------------------------------------------------------------------------
hink you misunderstood me bastya
I want to set up the hub for onla a few isps wich are accepted for not limiting traffic amongst users
not only for a internal net and its much easier to set this allowed ranges in Ptokax by remote then using a firewall
I think it's not true, at least if you block inbound to a port by default.
take a look at nightlitch dmz script and you see what i want to be inbuilt in ptokax - cant be to hard to add a switch for allow / disallow ipranges
QuoteOriginally posted by uffetjur
take a look at nightlitch dmz script and you see what i want to be inbuilt in ptokax - cant be to hard to add a switch for allow / disallow ipranges
Since the firewall touches a lower layer, it will be far less resource-intensive. PtokaX should NOT act as a firewall.
QuoteOriginally posted by ??~~~~Master~~~~??
but that's a hublist problem????
I don't know this protocol part. But i check PtokaX source and timer for hublist registering is 15 minutes -> that means after any 15 minutes hub send info to hublist how much users have and how much this users share. This is always generated in same way and working without problems on my small hub, must be hublist problem :rolleyes:
ok thanx anywayz... is there a way to contact those people???,, i'v tryed to find there website butt cant find it...
QuoteOriginally posted by ??~~~~Master~~~~??
ok thanx anywayz... is there a way to contact those people???,, i'v tryed to find there website butt cant find it...
Try here hublist.org:4111
QuoteOriginally posted by (uk)jay
Try here hublist.org:4111
Hublist.org have nothing to do with dreamland hublist...
Hi there.
If mass message send i: http://dchelp.no-ip.org/bug.txt
See link
QuoteOriginally posted by stageline
See link
Sorry here is no support for modified PtokaX :rolleyes:
modified? I not modified the program ?(
But rename.Because runing many ptokax on this server
QuoteOriginally posted by stageline
modified? I not modified the program ?(
But rename.Because runing many ptokax on this server
From the same folder? :D
Zitat:
--------------------------------------------------------------------------------
Originally posted by uffetjur
take a look at nightlitch dmz script and you see what i want to be inbuilt in ptokax - cant be to hard to add a switch for allow / disallow ipranges
--------------------------------------------------------------------------------
Since the firewall touches a lower layer, it will be far less resource-intensive. PtokaX should NOT act as a firewall.
----
As I see it allowing to ban IP-ranges, Ptokax will act as a firewall so , with your comment it looks as you will remowe the ban ip totally from ptokax - if so fix a script that ban ip's / ip ranges directly in the firewall then
And with an option to ban IP-ranges, it must be possible to redirect banned ip-ranges with reason
Mowes the discussion to this new thread: http://board.univ-angers.fr/thread.php?threadid=5417&boardid=9&styleid=1&page=1#1
Because this is wrong forum
Picture (800x600) ;-) (http://shield2k.org/ptx_error.jpg)
---------------------------11.10.2005 19:35:05---------------------------
Exception 'EAccessViolation' in module PtokaX.exe at 0006746B
Access violation at address 0046846B in module 'PtokaX.exe'. Read of address 00000420
Call stack:
:0046846B [PtokaX.exe] GetOnlineOperators (luaInterface.cpp, line 2024)
:00285A0D [PXLUA.DLL] luaD_precall (ldo.c, line 260)
:0028D294 [PXLUA.DLL] luaH_get (ltable.c, line 472)
:002900F6 [PXLUA.DLL] luaV_execute (lvm.c, line 631)
:77F517B2 [ntdll.dll]
:77F52438 [ntdll.dll]
:77F517B2 [ntdll.dll]
Recursive call (2 times):
:77F51DC9 [ntdll.dll]
:77F79005 [ntdll.dll]
:77F58F66 [ntdll.dll]
:00289077 [PXLUA.DLL] luaM_realloc (lmem.c, line 82)
:00285458 [PXLUA.DLL] luaD_growstack (ldo.c, line 140)
:00285B95 [PXLUA.DLL] luaD_call (ldo.c, line 313)
:002823ED [PXLUA.DLL] f_call (lapi.c, line 672)
:002851F7 [PXLUA.DLL] luaD_rawrunprotected (ldo.c, line 88)
:002851E9 [PXLUA.DLL] luaD_rawrunprotected (ldo.c, line 87)
:00285F2A [PXLUA.DLL] luaD_pcall (ldo.c, line 416)
:002823D0 [PXLUA.DLL] lua_call (lapi.c, line 657)
:00282455 [PXLUA.DLL] lua_pcall (lapi.c, line 685)
:002823D0 [PXLUA.DLL] lua_call (lapi.c, line 657)
:00291B0F [PXLUA.DLL] luaL_loadbuffer (lauxlib.c, line 539)
:00291BB5 [PXLUA.DLL] aux_do (lauxlib.c, line 569)
:00291C0D [PXLUA.DLL] lua_dobuffer (lauxlib.c, line 583)
:00291C2D [PXLUA.DLL] lua_dostring (lauxlib.c, line 588)
:004705F3 [PtokaX.exe] LuaTest (luaInterface.cpp, line 95)
:00572E97 [PtokaX.exe]
:00572F33 [PtokaX.exe]
:0041C7CA [PtokaX.exe] ThubForm::LUAcheckClick (frmHub.cpp, line 2584)
:77D340D5 [USER32.DLL]
:00525FAB [PtokaX.exe]
:005744AE [PtokaX.exe]
:00538869 [PtokaX.exe]
:0053895D [PtokaX.exe]
:00574313 [PtokaX.exe]
:77D340D5 [USER32.DLL]
:77D340DE [USER32.DLL]
:77D340AA [USER32.DLL]
:77D340DE [USER32.DLL]
:780C2EF7 [COMCTL32.DLL]
:77D33A68 [USER32.DLL]
:77D33B37 [USER32.DLL]
:77D33B67 [USER32.DLL]
:77F514E3 [ntdll.dll]
:77F75BB3 [ntdll.dll]
:77E6E00F [kernel32.dll]
:77E6E02C [kernel32.dll]
:005772B8 [PtokaX.exe]
:77D35968 [USER32.DLL]
:005387DD [PtokaX.exe]
:005740E3 [PtokaX.exe]
:005773F0 [PtokaX.exe]
:00577A4C [PtokaX.exe]
:00574313 [PtokaX.exe]
:77D35F87 [USER32.DLL]
:0057739C [PtokaX.exe]
:00574313 [PtokaX.exe]
:77D3CAE7 [USER32.DLL]
:77C63187 [GDI32.dll]
:77D33A68 [USER32.DLL]
:77D33B37 [USER32.DLL]
:77D33B67 [USER32.DLL]
:77D33B4B [USER32.DLL]
:005772B8 [PtokaX.exe]
:00576F33 [PtokaX.exe]
:0050C13E [PtokaX.exe]
:77D33A68 [USER32.DLL]
:77D33B37 [USER32.DLL]
:77D3450D [USER32.DLL]
:77D3453D [USER32.DLL]
:77FB4DA6 [ntdll.dll]
:77D35843 [USER32.DLL]
:77D3693B [USER32.DLL]
:77D354CC [USER32.DLL]
:780C1492 [COMCTL32.DLL]
:780C156B [COMCTL32.DLL]
:780C376D [COMCTL32.DLL]
:77D33B37 [USER32.DLL]
:77D33B67 [USER32.DLL]
:77D33B4B [USER32.DLL]
:77D33A68 [USER32.DLL]
:77D33B37 [USER32.DLL]
:014313E1 [IadHide5.dll]
:77D35B40 [USER32.DLL]
:77D35F87 [USER32.DLL]
:0057739C [PtokaX.exe]
:005748B3 [PtokaX.exe]
:0057482B [PtokaX.exe]
:00574313 [PtokaX.exe]
:77D33B37 [USER32.DLL]
:77D33B67 [USER32.DLL]
:77D33B4B [USER32.DLL]
:77D37FD8 [USER32.DLL]
:77D37E21 [USER32.DLL]
Recursive call (2 times):
:77D37E30 [USER32.DLL]
:77D59A2F [USER32.DLL]
:77D59A3F [USER32.DLL]
:77FB4DA6 [ntdll.dll]
:77D346A8 [USER32.DLL]
:77D37DF7 [USER32.DLL]
:005770E0 [PtokaX.exe]
Main Thread ID = 00001124, Current Thread ID = 00001124
Registers:
EAX = 00000003 CS = 001B EIP = 0046846B Flags = 00010246
EBX = 01324E18 SS = 0023 ESP = 0012F204 EBP = 0012F214
ECX = 00000000 DS = 0023 ESI = 00538848 FS = 0038
EDX = 00000000 ES = 0023 EDI = 0012F6F8 GS = 0000
Code at CS:EIP
8B 81 20 04 00 00 89 45 F0 83 7D F0 00 74 63 8B
Stack:
000010CD 00000000 00000000 00000003 0012F238
00000000 00000000 005770E0 00525E05 01396D44
005EC70B 00000002 00000000 00000000 0130288C
005770E0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.21 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 1
Type : 1
iJoins: 0, iParts: 0, iLogged: 0
A few days ago i started to go working on 0.3.3.21.nt.dbg so i putt all my settings in there and all my settings in Robocop 10.01e
When i sorted that i was gonna test the hub. No other scripts running
But now i cant see my Opchat anywhere in my hub all other bots work only opchat doesnt work i checked all my settings but i see nothing wrong
I checked the box register at hub. But i wont appear in my hub. Can somebody help me???
I also checked if there where error logs or other logs but cant find any log.
Make sure you have (allowed for op-chat) ticked in profile manager(advanced options in PtokaX) :D
Yeah (uk)jay :P
Thanks Jay didnt know that in the other versions i havent to do that
trying this script on a testhub, Ptokax0.3.3.21
http://st0ne-db.5u.com/
No other scripts running
It causes the hubsoft to close down without error messages
2005-10-17 22:36:30 - Serving started
2005-10-17 22:38:12 - Serving stopped (UL: 5725 , DL: 277)
2005-10-17 22:38:23 - Serving started
2005-10-17 22:44:08 - Serving started
i have no problem with the script just that it takes some times to load a RSS feed
cheers
thinks it crashes while 2 users waits for same feed
hmm...indeed it does strange wonder where the problem is ?( Ptokax or the script
QuoteOriginally posted by GrinSlaW
Ptokax or the script
Script :rolleyes:
When sending big massmsg
---------------------------18/10/2005 10:32:21 AM---------------------------
Exception 'EAccessViolation' in module PtokaX.exe at 00050BBD
Access violation at address 00451BBD in module 'PtokaX.exe'. Read of address 676E6D93
Call stack:
:00451BBD [PtokaX.exe] TProfileMan::IsAllowed (ProfileManager.cpp, line 320)
:0049BE4F [PtokaX.exe] cDcCommands::Chat (DcCommands.cpp, line 2483)
:00577912 [PtokaX.exe]
:77F42E95 [GDI32.dll]
:74FD9D5A [msafd.dll]
:74FD9D68 [msafd.dll]
:0048E8A6 [PtokaX.exe] cDcCommands::ProcessData (DcCommands.cpp, line 319)
:750313FA [WS2_32.DLL]
:750510A4 [WSOCK32.DLL]
:0045517C [PtokaX.exe] clsUser::ProcessLines (clsUser.cpp, line 651)
:004550DD [PtokaX.exe] clsUser::DoRecv (clsUser.cpp, line 626)
:005970EF [PtokaX.exe]
:005931F1 [PtokaX.exe]
:00569F01 [PtokaX.exe]
:0045F965 [PtokaX.exe] theLoop::FOnTimerTwo (serviceLoop.cpp, line 624)
:00569EAC [PtokaX.exe]
:00569E8A [PtokaX.exe]
:00569EE6 [PtokaX.exe]
:00510E7D [PtokaX.exe]
:0045E2D7 [PtokaX.exe] theLoop::FOnTimerOne (serviceLoop.cpp, line 238)
:004088B5 [PtokaX.exe] ThubForm::tmrGuiRefreshTimer (frmHub.cpp, line 951)
:77E3A3D0 [USER32.DLL]
:00569F3E [PtokaX.exe]
:00569E24 [PtokaX.exe]
:0050C13E [PtokaX.exe]
:77E3A3D0 [USER32.DLL]
:77E14605 [USER32.DLL]
:77E15DA2 [USER32.DLL]
:77E1482F [USER32.DLL]
:0050F823 [PtokaX.exe]
:77E15B77 [USER32.DLL]
:00566B58 [PtokaX.exe]
:00566B8F [PtokaX.exe]
:00566DAF [PtokaX.exe]
:00566DF2 [PtokaX.exe]
:00401B40 [PtokaX.exe] WinMain (PtokaX.cpp, line 43)
:005ADBBF [PtokaX.exe]
:00400000 [PtokaX.exe]
:7C59893D [KERNEL32.DLL]
Main Thread ID = 00000A74, Current Thread ID = 00000A74
Registers:
EAX = 017EF834 CS = 001B EIP = 00451BBD Flags = 00010213
EBX = 01C67050 SS = 0023 ESP = 0012FAE4 EBP = 0012FAF8
ECX = 0012FB74 DS = 0023 ESI = 00569F2C FS = 0038
EDX = 676E696B ES = 0023 EDI = 0012FEF4 GS = 0000
Code at CS:EIP
8B 82 28 04 00 00 8B 10 FF 52 14 48 8B 4D F8 3B
Stack:
0012FEF4 00569F2C 0012FB74 017EF834 676E696B
00000000 00000000 7C59893D 00525E05 01BA58E0
005EC70B 01795110 0000000B 00000000 01BA5AF8
7C59893D FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
Additional info:
Application Title : PtokaX DC Hub 0.3.3.21 [debug]
Major : 5
Minor : 0
Build : 2195
SP : 4
Type : 1
iJoins: 1, iParts: 0, iLogged: 1
NicklistLen : 101
OplistLen : 99
MyInfosLen : 146
MyInfosTagLen : 146
QueueA Size : 1024
QueueA Len : 0
QueueB Size : 1024
QueueB Len : 0
PQueue Size : 1024
PQueue Len : 0
HQueueA Size : 1024
HQueueA Len : 0
HQueueB Size : 1024
HQueueB Len : 0
OPQueueA Size : 1024
OPQueueA Len : 0
OPQueueB Size : 1024
OPQueueB Len : 0
InfoQueue Size : 1024
InfoQueue Len : 0
OPL-QueueA Size : 1024
OPL-QueueA Len : 0
OPL-QueueB Size : 1024
OPL-QueueB Len : 0
Q-QueueA Size : 1024
Q-QueueA Len : 0
Q-QueueB Size : 1024
Q-QueueB Len : 0
Zitat:
--------------------------------------------------------------------------------
Originally posted by GrinSlaW
Ptokax or the script
--------------------------------------------------------------------------------
Script
Please Protect us from bad scripts!
:D
I get this error with my stab bot;
[10:24] _StabBot_pto1.1.lua loaded.
[10:25] Syntax ...Files\0.3.3.21.nt.dbg\scripts\Funscript2.2-NoOps.lua:149: attempt to call global `getn' (a nil value)
i get this error with "THOR";
10:34] Thor.lua loaded.
[10:35] Syntax ...Files\0.3.3.21.nt.dbg\scripts\Funscript2.2-NoOps.lua:149: attempt to call global `getn' (a nil value)
Also, i have the fun script2 2 NO OPs, jokebot, and same nick LUA all on and supposedly running, but the commands for them do not work on my hub wheni am using the client i ahve to log onto the hub, and type them into main chat.
Forgive me if this has been taken care of in another thread. Newb here. Thanks guys! Glad to see another release.
QuoteOriginally posted by Jammaniaclord
I get this error with my stab bot;
[10:24] _StabBot_pto1.1.lua loaded.
[10:25] Syntax ...Files\0.3.3.21.nt.dbg\scripts\Funscript2.2-NoOps.lua:149: attempt to call global `getn' (a nil value)
i get this error with "THOR";
10:34] Thor.lua loaded.
[10:35] Syntax ...Files\0.3.3.21.nt.dbg\scripts\Funscript2.2-NoOps.lua:149: attempt to call global `getn' (a nil value)
These are LUA4 scripts, and PtokaX supports LUA5 now. This is why these messages appear.
QuoteOriginally posted by Jammaniaclord
I get this error with my stab bot;
[10:24] _StabBot_pto1.1.lua loaded.
[10:25] Syntax ...Files\0.3.3.21.nt.dbg\scripts\Funscript2.2-NoOps.lua:149: attempt to call global `getn' (a nil value)
i get this error with "THOR";
10:34] Thor.lua loaded.
[10:35] Syntax ...Files\0.3.3.21.nt.dbg\scripts\Funscript2.2-NoOps.lua:149: attempt to call global `getn' (a nil value)
Also, i have the fun script2 2 NO OPs, jokebot, and same nick LUA all on and supposedly running, but the commands for them do not work on my hub wheni am using the client i ahve to log onto the hub, and type them into main chat.
Forgive me if this has been taken care of in another thread. Newb here. Thanks guys! Glad to see another release.
Use script in Lua5 and you not have some error :D
its sometimes hard to se the difference between lua4 and lua5 scripts, would have been much easier if lua5 scripts got an Lua5 extension standard
as an example: scriptname_lua5.lua
I was running PtokaX 0.3.3.21 on an AMD @ 1200 Mhz, 256 DDR, Windows XP SP2 and i realised that PtokaX disconnects users (Connection reseted by peer) ! Is very strange, the server is runing on 100 MBps and the maximum number of users is 200 ! I made this hub for my LAN ! With PtokaX 0.3.3.1 i don't have this problem ! Thanks !
hmm....i have a problem when i add a new script to the hub thats have richtclick menu it will not been shown ?( and if i delet a existing script that i can see the richtclick menu it will not be deleted in the hub it seems that either Ptokax or somethingels is freezing the richclick's ?( i have tried diffrent clients and the same thing happens...any one have a clue whats wrong ?
and Ptokax is not giving any errors and no syntax error and yes the cripts work if i type in the commands manualy
hope you gouy's understand my problem :)
cheers
QuoteOriginally posted by GrinSlaW
hmm....i have a problem when i add a new script to the hub thats have richtclick menu it will not been shown ?( and if i delet a existing script that i can see the richtclick menu it will not be deleted in the hub it seems that either Ptokax or somethingels is freezing the richclick's ?( i have tried diffrent clients and the same thing happens...any one have a clue whats wrong ?
and Ptokax is not giving any errors and no syntax error and yes the cripts work if i type in the commands manualy
hope you gouy's understand my problem :)
cheers
Unfortunately this is a protocol limitation. The script cannot flush its own rightclicks, it can only flush the whole rightclick menu which is not good. (AFAIK)
But this is not a PtokaX bug at all.
ok but i have no problem with this before it just started for some days ago ?( dont exactly follow what you mean :rolleyes: . it must be something thats blocks the script to show the rightclick menu dont know what that could be maybe it is that you answerd hehe :P but do you have any clue how to fix it ? i suck in english, hard to explain how i mean :rolleyes: it is no script thats blocks it i have treid one script in time and the same happens the richtclick menu dont shows in the client
You can not remove specific menuitems. All or nothing. :D
haha oki tanks for the help :D have to look into it and see if it something i have done in scripts :)
cheers :)
i Think something is wrong with ptokax ul/dl wiew
compared with DU/meter it seems as it shows only the half of the netload.... this with +600 users.
I have confirmation that DU-meter shows the real netload to...
It show real data sent and received by hub (DC protocol data) as it return winsock... i don't know if is here way to get how much winsock add to this with TCP headers :rolleyes:
The problem is, it differs momentarely about 100 kib/s with 600 - 650 users connected especially in upload and thats almost double netload as shown in ptokax
This is the true netload with 600 - 650 users connected:
Period (Date) Download Upload Both Directions
2005-11-01 4,62 GB 14,48 GB 19,10 GB
2005-11-02 4,79 GB 14,13 GB 18,92 GB
2005-11-03 4,64 GB 12,77 GB 17,41 GB
Anyone else has that massmsg crash I posted earlier?
I have it without scirpts as well.