NXS-3

[WickeD]

Originally posted by NightLitch
--Level Checks / 1:on/0:off ( For Checking Client settings/ Share/ Advertisings
LC = {
[0] = 0,   -- Check Masters
[4] = 0,   -- Check Moderator
[1] = 0,   -- Check Operators
[2] = 0,   -- Check VIPs
[3] = 1,   -- Check REGs
[-1] = 1,   -- Check Users
}

this one...

make sure Operators & above is zero(0)

they should not be checked then.

This is my config:

--Level Checks / 1:on/0:off ( For Checking Client settings/ Share/ Advertisings
LC = {
[0] = 0,   -- Check Masters
[4] = 0,   -- Check Moderator
[1] = 0,   -- Check Operators
[2] = 0,   -- Check VIPs
[3] = 1,   -- Check REGs
[-1] = 1,   -- Check Users

Don?t now why they are check?t!!

[NightLitch]

gonna check that WickeD. Gonna do an update today. 1.91 will come.

[NightLitch]

About !hubstats & !status here's the explaination:

!status is an built in command that only shows in Main.

!hubstats is a command I have created to view the size of the files and some other goodies.

this I can't affect more.

this is it how it is... :-P

/NL

[NightLitch]

Updated fix version:

NXS3 Version 1.9.1

1.9.1	:	Fixed Advertising with levels should works now.
		Fixed so triggerbot works for all levels
		Fixed the SendTo error.
		Fixed UserInfo, should work withour problem now.
		Fixed TimeBan som values wrong.

enjoy...!

[WickeD]

Do you take a look at my adder wishes later when you get the time for it my m8?   =)

[WickeD]

!info do not work on VIP/OP/MOD/MAS!

This info do show on the bot, You have not erased it: OpChat_Descr = "Users can posts fakers and other bad things here"

When I logg in to my hub I get this info:

   Welcome [SU+]WickeD !
------------------------------------------------------------------------------------
 
 You are using DC++ Version: 0.306.
 You are Sharing 67.07 Gb and 6 Slot(s).
 You are in 1 Hub(s) as user.
 You are in 1 Hub(s) as registered user.
 You are in 0 Hub(s) as operator.
 Your Bandwidh Limiter is unlimited kB/s
 You are in Active Mode.

And when I type this !myinfo in the hub I get this info:

         [SU+]WickeD user info.
 -----=============================================================---
   Your IP: 212.32.167.167
   You are using DC++ client ver. 0.306
   You Share: 67.07 Gb
   You have 6 slot(s) Opened.
   You are in1 Hub(s) as user.
   You are in 0 Hub(s) as registered user.
   You are in 1 Hub(s) as operator.
   Your bandwidh limiter is set to unlimited kB/s
   You are in Active Mode.
 -----=============================================================---
   Warn(s):      0 Time(s)
   Warn Reason:   N/A, Time: N/A
   Warned by:   N/A
   Kick(s):      0 Time(s)
   Kick Reason:   N/A, Time: N/A
   Kicked by:   N/A
   Ban(s):      0 Time(s)
   Ban Reason:   N/A, Time: N/A
   Banned by:   N/A
 -----=============================================================---

That is not right, I am Master in my hub!

//WickeD

[GeNNeLL]

when you enter the hub you have only status registered, this is soft bug, status op you have when you stay in hub, script work fast, you have only status reg in this time.  :rolleyes:

[Smulf]

Good work NightLitch... How nice of you spending so much time on it :)

[NightLitch]

Originally posted by Smulf
Good work NightLitch... How nice of you spending so much time on it :)

Thx.

Originally posted by WickeD
This info do show on the bot, You have not erased it: OpChat_Descr = "Users can posts fakers and other bad things here"

Thx again. will remove it.

And the Info thing I will take an even closer look this time.

though I had fixed it.

Have a nice evening/day / NL

[NightLitch]

New Fix/Update out:

NXS-3 Version: 1.9.2

1.9.2	:	Change the Op-Chat desc. for long WickeD have mention this. :-D
			Hopefully fixed The Reg/Op info thing.

Enjoy!

/NL

[f3rry]

hi NightLitch

i have this error.....  :(

Syntax error: attempt to perform arithmetic on local `vShare' (a nil value)

hope you can fix it :)

[WickeD]

In Anti Adver, If I want the script to trigger on .se there are many hubs that ends on .se how do I write that? Do I wirte .se or se?  But do it trigger on every word that has (se) in it then? Or do it trigger on .se in words then?   And the Anti Adver, do it only trigger on words that ends on .se?

//WickeD

[NightLitch]

WickeD:

use .se not se if only se then yes it takes on everyting.

f3rry:

Thx for the bug. gonna check it.

You didn't happen to have the right line where the error ocurs ??

/NL

[f3rry]

hi NightLitch

Sorry, forgot it.
This is the whole errror report.

Syntax error: attempt to perform arithmetic on local `vShare' (a nil value)
stack traceback:
   1:  function `CheckShare' at line 772 [file `D:\PtokaX\scripts\NXS-3.lua']
   2:  function `DataArrival' at line 386 [file `D:\PtokaX\scripts\NXS-3.lua']

[NightLitch]

thx

[NightLitch]

New Fix/update:

NXS-3 Version: 1.9.3

1.9.3	:	Fixed a error in share check.
			Fixed show ban to users so it is checked on Timeban as well.
			Added:
				* KickVIP on/off
				* KickREG on/off
				* Share Redirect for both Low & High.
			Change:
				* The MaxShare check so it is check diff. for each level.

Enjoy!

/NL

[f3rry]

hi NightLitch

i have now this error....  

Syntax error: unfinished string;
  last token read: `"address.myftp.org' at line 101 in file `NXS-3.ini'
stack traceback:
   1:  function `dofile' [C]
   2:  function `Main' at line 123 [file `D:\PtokaX\scripts\NXS-3.lua']

Syntax error: attempt to concat global `BotName' (a nil value)
stack traceback:
   1:  function `Main' at line 169 [file `D:\PtokaX\scripts\NXS-3.lua']

Syntax error: attempt to index global `LC' (a nil value)
stack traceback:
   1:  function `AllowClients' at line 671 [file `D:\PtokaX\scripts\NXS-3.lua']
   2:  function `DataArrival' at line 385 [file `D:\PtokaX\scripts\NXS-3.lua']

you are donig great work :)  it's a nice script..

[f3rry]

Hi NightLitch

The last error was nothing serious, already solved it.
The problem was this line in the NXS-3.ini

-- High Share Redirect Address
HighShareRedirectAddress = "address.myftp.org

Must be:

HighShareRedirectAddress = "address.myftp.org"

The script works fine now, thanks for fixing the vShare bug :-P

[NightLitch]

hehe what a miss by me for that.

Good you like it. :-) More to come later.

Must learn gsub some so I can make the MultiLang soon.

[B@B?]

Hoi NightLitch  ;)

Please let me know if the Multi-Language is ON.

If in "german" i?ll offer this script 2 my partners...

Seems a nice one so i can say:

a good job...  :P

[WickeD]

The script is working gr8 now m8!!  =)


Do you think you can add a Bad-File-Check in to NXS-3 that warn the user that have Bad-File, And pot the warn in to warnlog?

Thx for all work you are doing on NXS-3, The best script there is!!....For me anyway!!  =)

//WickeD

[kbeh273300]

No syntax errors in script file Trivia-Ex-V.0.645.lua
No syntax errors in script file NXS-3.lua
Syntax error: or `[' expected;
  last token read: `' at line 8 in string "KickTable = {..."
stack traceback:
   1:  function `dostring' [C]
   2:  function `LoadFromFile' at line 119 [file `NXS-3/data/Serialize.lua']
   3:  function `Main' at line 150 [file `...d Settings\USER\Desktop\NXS-3\scripts\NXS-3.lua']


:(

[NightLitch]

one thing, have you had one of the older versions ???

try reinstall the hole script. from scratch.

if that not work I will look closer on it.

[Seredo]

i have reinstall the hole script
after 45 min the errror is back.

:(

[NightLitch]

you have the same error as: kbeh273300 ??? Seredo?