NXS-3

[NightLitch]

Why is this happening ??? I have no problem with it.hmm...

Could you be so kind posting your first lines in KickFile...

There is the problem at line 8... wanna se that.

[WickeD]

My NXS-3 v.1.9.3 is working fine! I have not tryed kicking / warning / Ban any one, but it works gr8!!  =)

Thx a lot!  

//WickeD

[NightLitch]

I have kicked many diff. names and no problem in kickfile.

[BeeR]

Originally posted by NightLitch
I have kicked many diff. names and no problem in kickfile.

Hellou Mr [:
 Can you add a !kill command (nick and ip ban) ??

[NightLitch]

maybe l8r. Wanna know what problem Seredo & kbeh273300 have...

The error message is not enough right now.

Wanna se the file to what causing this.

[NightLitch]

afoul quiet here... :-P

Get me the info for the bug.

for the moment I Am trying to get MultiLang & Table Commands to work.

/NL

[WickeD]

My Script is working fine!! =)   that is why it is quiet here!!  *lol*  =)


Have a good one NightLitch!!

//WickeD

[NightLitch]

Well you are one of the big testers of this one so I trust you half then ;-p... hehe

Will continue the updating then hope this error has to do with something.

Often it is becouse when updating this script, remember always to do a clean install everytime you install this script, just for saftey and to avoid errors.

I can do some slighly small adjustments I don't remember doing.

And it can affect the old logfiles if they is not emty.

Well my guess is if the plans going my way NXS-3 2.0 will come on monday.

good night sleep tight nighy night... :-)

/NL

[kbeh273300]

ok well first things first i did a full install of the NXS-3 v.1.9.3 and i get redirects from my network and i also use dc++ cnd on the hub il past you the info you need on that error.but i cleared all the logs so im gona try it again with a fresh hubsoft and and fresh install and il post my results soon.i get alot of trafic through my hub,and with my dc++ cmd running and searching for forbiden files there are kicks and warns and bans haping constintly.but i realy like this bot so far so il stick with it and do as much testing as i can till we get all the bugs worked out if there are any.

[f3rry]

Hi NightLitch

The scripts works fine here.

I onley have one little thing. The max share onley works on users witch LC 0 and not with LC 1.

[kbeh273300]

No syntax errors in script file NXS-3.lua
No syntax errors in script file Trivia-Ex-V.0.645.lua
No syntax errors in script file regclean.lua
Syntax error: bad argument #2 to `format' (number expected, got table)
stack traceback:
   1:  function `format' [C]
   2:  function `Serialize' at line 96 [file `NXS-3/data/Serialize.lua']
   3:  function `SaveToFile' at line 113 [file `NXS-3/data/Serialize.lua']
   4:  function `SaveKickBanInfo' at line 5 [file `NXS-3/data/Handlings.lua']
   5:  function `doWarnUser' at line 495 [file `NXS-3/data/ComFunc.lua']
   6:  function `Com' at line 74 [file `NXS-3/data/ComFunc.lua']
   7:  function `BotCom' at line 565 [file `...s\USER\Desktop\New Folder (9)\scripts\NXS-3.lua']
   8:  function `DataArrival' at line 467 [file `...s\USER\Desktop\New Folder (9)\scripts\NXS-3.lua']

Syntax error: bad argument #2 to `format' (number expected, got table)
stack traceback:
   1:  function `format' [C]
   2:  function `Serialize' at line 96 [file `NXS-3/data/Serialize.lua']
   3:  function `SaveToFile' at line 113 [file `NXS-3/data/Serialize.lua']
   4:  function `SaveKickBanInfo' at line 5 [file `NXS-3/data/Handlings.lua']
   5:  function `ToKickMsg' at line 901 [file `...s\USER\Desktop\New Folder (9)\scripts\NXS-3.lua']
   6:  function `DataArrival' at line 452 [file `...s\USER\Desktop\New Folder (9)\scripts\NXS-3.lua']


as for the kick log file this was the only thing that was in it >>   KickTable = {

i deleted that and restarted the script and the error went away. hope this helps . if you need any other info i saved the NXS folder to a diferent place on my pc for any other info you may need me to get for you.i did that before i deleted KickTable = { from the kicklog and restarted the script the error went away and all is fine for now but im sure it will return i would think. im a beta tester for the ptokax 15.25 debug so thats the hubsoft im useing to test this script.other scripts im running are Trivia-Ex-V.0.645.luaand regclean.lua by plop

[kbeh273300]

ok i found out what caused the error in the old script i use to use it had a   !kill   cmd some of my op's were useing or atempting to use it with this script and it was causeing that error above.

also i was woundering if it could be set to alow op's to post web addy's i wanted to send the ady to the download of this script to a fellow op and hub owner and i was kicked lol.i set it to not kick and i got Advertising Censored, sorry lol

other then that i like the lightness of this script as i dont need much since i started usering dc++ cmd client.

keep up the good work and keep it light and low mem usage :)

[kbeh273300]

i tryed connecting as a non reged user to my hub useing this script and i got disconected it said you client is not welcome here.is there way that you could or i could change this so that any unwated users would be redirected ? being in a network its importent that i redirect any users i dont want other hubs in the network may want those users.maybe just a little mod to the script?

[NightLitch]

let me guess... you used DC++ CDM ??? :-)

I have notice that tiny error forgot adding it to allowclient part. it is now.

Gonna Release 1.9.4 soon.

With some more stuff added.

[NightLitch]

Originally posted by kbeh273300
ok i found out what caused the error in the old script i use to use it had a !kill cmd some of my op's were useing or atempting to use it with this script and it was causeing that error above.

That shouldn't cause the error, becouse any invalid command will be 0 for ex. !butter  that is not in the script. :-D

so nothing will happen no errors no nothing.

if the error keeps coming back tell me.

the KickTable thing I notice I Am the one causing IT.

forgot to del it right. sry.

/NL

[f3rry]

Hi NightLitch,

I'm running your script for the first time this weekend.
I've already tested it on a test hub before, but now it's running on my hub with +/- 300 users.

I must say it works realy great. No errors and no bugs.
The script onley use a lot of memory, never seen before with other scripts. I hope my system will not crash.

Memory used by scrips (kb)
script    Men  GC
NXS-3.lua 1045 1856

This memory is become more, hour after hour. I think it's because of the offline info.

I also have a request for the next version. Is it possible to make a clone detector in it?

[kbeh273300]

ok i think it could have something to do with the kickban.and yes im running dc++ cmd on the hub :)
il try the new vir now and let ya know.


keep up the great work .

[kbeh273300]

!showstaff doesnt work it gives this error when used.

No syntax errors in script file NXS-3.lua
No syntax errors in script file Trivia-Ex-V.0.645.lua
No syntax errors in script file regclean.lua
Syntax error: `for' table must be a table
stack traceback:
   1:  function `ShowStaff' at line 1204 [file `NXS-3/data/ComFunc.lua']
   2:  function `Com' at line 164 [file `NXS-3/data/ComFunc.lua']
   3:  function `MainCom' at line 546 [file `...s\USER\Desktop\New Folder (4)\scripts\NXS-3.lua']
   4:  function `DataArrival' at line 450 [file `...s\USER\Desktop\New Folder (4)\scripts\NXS-3.lua']

[Optimus]

This memory is become more, hour after hour. I think it's because of the offline info.

Hi all how's here???
well i have tested this bot and discoverd the same problem it uses lot's of memory. And yes it's because of the Info that is stored about all users that connect.

Further i must say it's a small and nice script not bad at all.

Keep it up may the gods be with you... :]

Greetingzzz Opti

[NightLitch]

Gonna try make the info part smoother. And gonna check the error on Showstaff.


Got myself a "tiny" hangover from lart night. :-p

so progress is slow for the moment... :-p

/NL

[angelsanges]

 -= Spam Warning =-
      Violation detected by: depp
      IP: 5.255.164.1   
      Last packet :    $To: Vandel\Debug From: depp $ Error in ProccessSearch
Error: Too many files
Line: 117
Extra Data:  Time: 17/02/2004 16.35.30


??what does it means?

[NightLitch]

It has to do with spamming and flooding chat/PM and hub.

it is taken from Dirtyfingers SpamBan 1.2

so nothing should be wrong.

That was am strange message but surely is a good explaination for it.

But I can't say it... haven't got anything like that.

Last packet : $To: Vandel\Debug From: depp $ Error in ProccessSearch

looks like he has searched spammed or something.

that is my explainantion.

/NL

[angelsanges]

i'm using TD4

[NightLitch]

have no clue... but if there is more getting this kinds of errors I must look into this.

The script is mainly created for 0.3.3.0 but for for TD4 to without problems.

/NL

[WickeD]

When I send a massage to my self like this: //WickeD hubbar.dyndns.org



I get this from NXS-3 v.1.9.3:

In mainchat:<> [SU+]WickeD - 212.32.167.167 is advertising, typing: //WickeD hubbar.dyndns.org

In Pm from script: <[B?]?V?L:???> Advertising Censored, sorry.

In Pm from my self: <[SU+]WickeD> //WickeD hubbar.dyndns.org




And I have in settings like this:

-- Set HubAddress that will be shown instead of the ADVER advertising's.
HubAddress = "northside.se"

--Level Checks / 1:on/0:off ( For Checking Client settings/ Share/ Advertisings
LC = {
[0] = 1,   -- Check Masters
[4] = 0,   -- Check Moderator
[1] = 0,   -- Check Operators
[2] = 0,   -- Check VIPs
[3] = 1,   -- Check REGs
[-1] = 1,   -- Check Users

And I am a Master!


This is my  Adv triggers:

["no-ip.se"]=1,["no-ip.nu"]=2,["no-ip.net"]=3,["no-ip.com"]=4,["no-ip.org"]=5,["no-ip.biz"]=6,["no-ip.cc"]=7,["no-ip.info"]=8,["no-ip.ws"]=9,
["ip.se"]=10,["ip.nu"]=11,["ip.net"]=12,["ip.com"]=13,["ip.org"]=14,["ip.biz"]=15,["ip.cc"]=16,["ip.info"]=17,["ip.ws"]=18,
["dyndns.se"]=19,["dyndns.nu"]=20,["dyndns.net"]=21,["dyndns.com"]=22,["dyndns.org"]=23,["dyndns.biz"]=24,["dyndns.cc"]=25,["dyndns.info"]=26,["dyndns.ws"]=27,
["myftp.se"]=28,["myftp.nu"]=29,["myftp.net"]=30,["myftp.com"]=31,["myftp.org"]=32,["myftp.biz"]=33,["myftp.cc"]=34,["myftp.info"]=35,["myftp.ws"]=36,
["hopto.se"]=37,["hopto.nu"]=38,["hopto.net"]=39,["hopto.com"]=40,["hopto.org"]=41,["hopto.biz"]=42,["hopto.cc"]=43,["hopto.info"]=44,["hopto.ws"]=45,
["orgdns.se"]=46,["orgdns.nu"]=47,["orgdns.net"]=48,["orgdns.com"]=49,["orgdns.org"]=50,["orgdns.biz"]=51,["orgdns.cc"]=52,["orgdns.info"]=53,["orgdns.ws"]=54,
["mine.se"]=55,["mine.nu"]=56,["mine.net"]=57,["mine.com"]=58,["mine.org"]=59,["mine.biz"]=60,["mine.cc"]=61,["mine.info"]=62,["mine.ws"]=63,
["dynip.se"]=64,["dynip.nu"]=65,["dynip.net"]=66,["dynip.com"]=67,["dynip.org"]=68,["dynip.biz"]=69,["dynip.cc"]=70,["dynip.info"]=71,["dynip.ws"]=72,
["servebeer.se"]=73,["servebeer.nu"]=74,["servebeer.net"]=75,["servebeer.com"]=76,["servebeer.org"]=77,["servebeer.biz"]=78,["servebeer.cc"]=79,["servebeer.info"]=80,
["servebeer.ws"]=81,[".se"]=82,[".com"]=83,[".org"]=84,[".nu"]=85,[".biz"]=86,[".info"]=87,[".net"]=88,[".cc"]=89,[".ws"]=90,


Do the Adv triggers look right?

//WickeD