Greetings,
I have two issues.
1) I used !op on a VIP and then slightly after manually upgraded them to Admin for a time in Ptokax to help out, then lowered the access level back to VIP in Ptokax. Now the user is listed and reg'd as VIP, but can still chat and see OP-Chat... now I think this is a CB5 issue and not a Ptokax issue.
2) The other one is users losing connection... primarily users in the U.S. (we are Sweden) are forced to reconnect about every 2-3 minutes. I'm getting no notifications about it, but has only started since the install of CB5. The users are getting no messages, they are just offline suddenly. All my U.S. users, one Israel user and one UK user, nothing I can see as particularly common in them. --- Ideas?
BF
Hi,,
Quote1) I used !op on a VIP and then slightly after manually upgraded them to Admin for a time in Ptokax to help out, then lowered the access level back to VIP in Ptokax. Now the user is listed and reg'd as VIP, but can still chat and see OP-Chat... now I think this is a CB5 issue and not a Ptokax issue.
!op command under CB is just an ' ornementation ' (not sure about the word,...lol)
The user has a beautifull key,... & that's all,.... :)
It can be also usefull if you reg a new Op, using !reg command,
ex:
---
!reg Guibs pass op
---
then, Guibs is regged as normal Op,, but he still doesn't get the ' yellow key '.
2 choices, then,
1) you can use: !op Guibs (giving him the yellow key)
2) ask him to reconnect on the hub to get the yellow key,...
About the chat,.... if you want to invite an user under a chat (user-chat/ vip-chat or opchat), just type:
----
!invite Guibs
----
in the correct chat,....
Quote2) The other one is users losing connection... primarily users in the U.S. (we are Sweden) are forced to reconnect about every 2-3 minutes. I'm getting no notifications about it, but has only started since the install of CB5. The users are getting no messages, they are just offline suddenly. All my U.S. users, one Israel user and one UK user, nothing I can see as particularly common in them. --- Ideas?
Hmm,.... not sure,... it can be a bug about the suspend mode (now corrected & a fix is for soon,,)
Do they get kicked, reconnected, or just disconnected...?
l8tr,,
QuoteHmm,.... not sure,... it can be a bug about the suspend mode (now corrected & a fix is for soon,,) Do they get kicked, reconnected, or just disconnected
The are sudden offline, but receive no message or kick... like they lost connection. They can usually connect a few moments later (within 5). This affects protected ops as well.
BF
The !block command is not function. I did some tests with !block 10 gb and !block nickname and both can download from me.
I set to auto clean logs each 1 hour for all levels, and off auto unreg for mods and ops.
Yestarday I give OP status for user and 4 hours after he was unregistered automatically. Why?
lol
i need holidays,.......................................
l8tr,,,,,,,,,,,, :D
I have CB 4.3c installed on, after running the CB 5.0 updater the CB5 sx GUI tells me this error, in french:
Execution error ?53: file inaccesible
My french its poor ..sorry
Modem (56.6K) should be included by default in the conenction lists, isn't?
The !teach command... have any utility?
Translates are incompletes, if need help to tranlate CB to spanish contact me at gaueko@tiscali.es.
The commands should be translatables... my hub is for spanish speakers and many are so stupids... ;-p
Sorry for my english, and great job!!
(Hi Godv ;D)
Hi there,,
acrespo,,
!block command should work,...
Be sure the user is not immune or doesn't have a higher or egal level as your,....
QuoteI set to auto clean logs each 1 hour for all levels, and off auto unreg for mods and ops.
Yestarday I give OP status for user and 4 hours after he was unregistered automatically. Why?
hmm,... i've not done all test about those unreg/clean log functions,... maybe they need a fix,, yep,... i will look at them, :)
Godvampire,
QuoteI have CB 4.3c installed on, after running the CB 5.0 updater the CB5 sx GUI tells me this error, in french:
Execution error ?53: file inaccesible
If you were using Old Cb (v4,, or wathever) don't use any files from the old script,... Clean & complete install needed,... (use the v5.1 full installer & not the updater)
?nek?,
QuoteModem (56.6K) should be included by default in the conenction lists, isn't?
it depends,... some wouldn't have modem in their hubs,...
Be happy that the installation included some basic client-profiles & some basic connection type,... :p
QuoteTranslates are incompletes, if need help to tranlate CB to spanish contact me at gaueko@tiscali.es.
True,....
If you can & have done it,, would be nice to post the corrections done (even the commands.sp.dat file,, if you want,,) under the Latest correction thread,... ;)
New update is coming,,
l8tr,,
The problem of suspend mode was correct in new version but there is other problem in that mode.
If a user in suspend mode change the share during the 3 minutes of suspend, user will kick because the check is not doing anymore before kick.
The results of ?immune command:
***None users immuned on Unreg check.
***None users immuned on Clean Log check.
***Passive mode is allowed.
***Mac Clients are not checked.
***Free slot are not checked.
***None users immuned by their Nick found.
***Current users Immuned by their Ips are listed as:
VIP_BOT with level: 9
***& DCPPIMMUNE is disable.
I type ?immune command with user acrespo. acrespo is a founder and I set in GUI to immune all users with OP level or higher. I have many ops, 2 mods and 2 admins.
Why I saw only one user in that list?
Hi,,
Ok,, i will check the suspend mode again,, ;)
About the immune functions,,
' Immune by nick ' is not Immune by Ip,
QuoteI type ?immune command with user acrespo. acrespo is a founder and I set in GUI to immune all users with OP level or higher. I have many ops, 2 mods and 2 admins.
Why I saw only one user in that list?
I think the ops immune by Ip must be connected,... (not sure,, lol,, i will check it too,,)
btw,, are they connected,....?
& > VIP_BOT with level: 9 < is an user,, or a bot ? :o)
l8tr,,
VIP_BOT is a user (founder level), act as a bot :o)
3 users with OP level were connected in the hub at the time of previous post, but only VIP_BOT was immune. In GUI, I set to immune all levels higher than OP and by nick is checked too.
About auto unreg user, see !info command of VIP_BOT below:
***Info on: VIP_BOT
Connected: Yes
Status: User
Reg By: acrespo date: 23.03.2004 Hora: 19:38:01
Unreg by: -=WAS2=- (n?vel anterior: 9) date: 23.03.2004 Hora: 20:25:55
Hostname: Immune
Ip: Immune
Share: 5.20 Gb
First shared: 320.15 Mb
Middle shared: 4.08 Gb
Most shared: 12.85 Gb
Less shared: 320.15 Mb
Total connected: 1 dia(s) 21 hora(s) 34 minuto(s) 25 segundo(s)
Middle connected: 1 hora(s) 37 minuto(s) 39 segundo(s)
Connected since: 1 minuto(s) 43 segundo(s)
Most connected: 2 minuto(s) 41 segundo(s)
Less connected: 1 minuto(s) 43 segundo(s)
Slots: 2
Profile name: DC++ & Profile Id: 5
Client: DC++
Client version: 0.306
iVersion: 1,0091
Connection Type: dsl
Mode: A
Share description: Distribui??o de animes para usu?rios VIPs
Tag: <++ V:0.306,M:A,H:1/0/0,S:2>
Mail: was@wasbr.com
Total successfull connected: 26
Total failed on connect: 2
Last fail reason: 'porque n?o compartilhou o suficiente. Tamanho: 3.56 Gb' / Date: 23.03.2004 Hora: 19:30:11
Kicked: 1
Last kick & kick reason: 'Suspend/share' as 23.03.2004 Hora: 19:32:52
Language: br
Last activity: VIP_BOT Conectado em 23.03.2004 Hora: 22:24:36 e ainda est? aqui...
I changed the level of this user to reg and return the level to founder at 7:38 PM. 1 hour after the return of level, channelbot unreg my VIP_BOT user automatically.
!block is not working for me either. Tested with different nicks but they still can d/l.
Hi there,,
acrespo,
Ok,, i think i've now fixed the !block command & the ip immune list problems... a fix should come soon,
but about:
QuoteI changed the level of this user to reg and return the level to founder at 7:38 PM. 1 hour after the return of level, channelbot unreg my VIP_BOT user automatically.
hmm,.... could you please show me the settings about the clean functions, (show me the result you get with: ' ?set clean ')
l8tr,,
Hi
I keep getting Runtime Error '13'
Type mismatch
Thats on setting up the settings
any ideas
Woody
QuoteOriginally posted by Guibs
hmm,.... could you please show me the settings about the clean functions, (show me the result you get with: ' ?set clean ')
l8tr,,
---------------------------------------- Clean & Unreg functions ----------------------------------------
CHECKTIMEMODE is set to 6 hour(s) MAXTIMEAWAYMODE is set to 0
[Actions:] DELMODE is set to modo autom?tico & REMOVELOGMODE is set to none
CHECKTIMEOP is set to 1 hour(s) MAXTIMEAWAYOP is set to 0
[Actions:] DELOP is set to modo autom?tico & REMOVELOGOP is set to none
CHECKTIMEVIP is set to 1 hour(s) MAXTIMEAWAYVIP is set to 15 day(s)
[Actions:] DELVIP is set to modo autom?tico & REMOVELOGVIP is set to modo autom?tico
CHECKTIMEREG is set to 1 hour(s) MAXTIMEAWAYREG is set to 15 day(s)
[Actions:] DELREG is set to modo autom?tico & REMOVELOGREG is set to modo autom?tico
CHECKTIMENEWBIE is set to 1 hour(s) MAXTIMEAWAYNEWBIE is set to 7 day(s)
[Actions:] DELNEWBIE is set to modo autom?tico & REMOVELOGNEWBIE is set to modo autom?tico
CHECKTIMEUSER is set to 1 hour(s) MAXTIMEAWAYUSER is set to 15 day(s)
[Actions:] REMOVELOGUSER is set to modo autom?tico
ENABLECLEANLOG is set to on
ENABLEUNREG is set to on
modo autom?tico = automatic mode. ;)
QuoteOriginally posted by Woodster
Hi
I keep getting Runtime Error '13'
Type mismatch
Thats on setting up the settings
any ideas
Woody
try to look in
ptokax\scripts\ChannelBot_Readme.txt
see there hope your problem will be solved when you did that
Greets Ac:)
Greets...
Please help!
since i updated to 5.1b my mainchat is spammed with these messages:
13:54:41] ?*?*?*? Blocked: Hub:Jah was making a search or trying to connect, as he is not connected on the Hub! / data: $Search Hub:Jah T?F?3052355?2?11Pleasant$dream$part$2.MP3
[13:54:49] ?*?*?*? Blocked: Hub:rastaxabi was making a search or trying to connect, as he is not connected on the Hub! / data: $Search Hub:rastaxabi T?F?2424831?2?The$Chosen$Few$$$Everybody$Just$A$Stall$$UK$Song$Bird$SB$1067$A$1971$$^$Skips$At$1$Min$02$Secs$^$mp3
the users are in the hub! Can anyone tell me how to get rid of this?
Thanx!
oh, found out they are all in passive mode but still dont know how to fix it ;)
Hi there,,
Acrepo,,
If you still have some problems, about the clean log/reg functions,,.... maybe change all parameters > autom?tico < to ' ask/manuel ',....
GanjaMan,,
nice bug,... :)
Waiting for a fix, you can always change the HUBOWNER value,... or log you with an other nick,... (because those kind of messages are only send to the HUBOWNER nick),,
l8tr,,
Ok... dropping user issues.... same users... even after update... here's a sample and some info...
[14:44] <> 'Yeah baby yeah!', says [SU]Mutor and then proceeds to drive off into the sunset in his Shaguar sports car ...
[14:45] <> [SU]jpdragon says, 'Liston verry carefully ... I shall say zis only wonsse!'
[14:48] <> [SU]Mutor rocks up on a flying tortoise ...
[14:48] <> Sorry Jack ... [SU]jpdragon is back!
[14:54] *** Connection reset by server
That last one was me getting disconnected (logging in remote, to the hub. Not on the server machine).
Almost all of them are OPs or VIP, with a few exception. It happens every couple of minutes. Always the same set of users (about 5 or 6 of them out of 30 online).
It's driving them nuts.
Ideas?
Fox
Hi,,
Blackfox,
Hmm,.... no ideas there, for the moment,....
Please, be sure that:
1) user get disconnected without having any message
2) all notifications are enabled,, and none notification message is send to admins, while user get disconnected,
If you still have some problems, please pm me,... then, we could try to solve it in private,...
All,
Thks to tell if you have some similar problem,... that one is weird,... :s
l8tr,,
Hi,,
GanjaMan,
Quote!block is not working for me either. Tested with different nicks but they still can d/l.
If you're doing test on yourself, using differents nick & if you're immune by ip,, then the script won't block you,.... normal,...
But if you're trying to block an user which has a lower level then your, & if the user is not immuned,, then it should work,...
please, give more details about,...
l8tr,,
Hi Guibs, i like ChannelBot 5.2, but i stll having these problems
*** Connecting to mozkiss.no-ip.com...
*** Connected
This hub is running PtokaX DC Hub 0.3.2.6 TestDrive 4.99 (UpTime: 0 hours, 0 minutes)
Welcome to PtokaX
Hub powered by Channel Bot v5.0 SX
*** Disconnected
*** Connecting to matrixhub.no-ip.com:411...
*** Connection timeout
Can you help me??
sorry my english isn't good
have a nice day
Valyto
QuoteOriginally posted by Valyto
Hi Guibs, i like ChannelBot 5.2, but i stll having these problems
*** Connecting to mozkiss.no-ip.com...
*** Connected
This hub is running PtokaX DC Hub 0.3.2.6 TestDrive 4.99 (UpTime: 0 hours, 0 minutes)
Welcome to PtokaX
Hub powered by Channel Bot v5.0 SX
*** Disconnected
*** Connecting to matrixhub.no-ip.com:411...
*** Connection timeout
Can you help me??
sorry my english isn't good
have a nice day
Valyto
I'm not sure but u should try an offical hubsoft release
and about the timeout could be a redialin ( No-IP not updated )
so show mw please wich version can i try
Valyto
Keep getting:
Syntax Error: attempt to concat global `sBotName' (a nil value)
and
invalid control char; last token read: '0x1B at line 1 in string "ChannelBot_v5.lua"
Syntax error during pre-compilation.
QuoteOriginally posted by Valyto
so show mw please wich version can i try
Valyto
Try the latest offical relesae TD4
hello Event_Horizon
I'm using this version, isn't good???
PtokaX DC Hub 0.3.2.6 TestDrive 4.99
this is the correct and newest offical release
This hub is running PtokaX DC Hub 0.3.2.6 TestDrive 4
No syntax errors in script file C:\Program Files\PtoKaX\scripts\ChannelBot_v5.lua
Syntax Error: bad argument #1 to `strlower' (string expected, got nil)
Syntax Error: bad argument #1 to `getn' (table expected, got nil)
Syntax Error: `for' table must be a table
using latest PtokaX 0.3.2.6 testdrive 4
only script i am running is the latest Channel Bot - v5.1
was wondering what these errors are
------------------------------------------------------------
i would also quite like to know how to disable portions of the script. u hvae no use for the profilies stuff - and i want to disable it - how do i do this?
------------------------------------------------------------
also when setting the level for commands - does any user with a level higher than that of the number input or what?
thanks for any answers in advance :)
QuoteOriginally posted by bliskner
No syntax errors in script file C:\Program Files\PtoKaX\scripts\ChannelBot_v5.lua
Syntax Error: bad argument #1 to `strlower' (string expected, got nil)
Syntax Error: bad argument #1 to `getn' (table expected, got nil)
Syntax Error: `for' table must be a table
using latest PtokaX 0.3.2.6 testdrive 4
only script i am running is the latest Channel Bot - v5.1
was wondering what these errors are
------------------------------------------------------------
thanks for any answers in advance :)
i would also quite like to know how to disable portions of the script. u hvae no use for the profilies stuff - and i want to disable it - how do i do this?
------------------------------------------------------------
!set LISTIPS off/on
!set LVLIPIMMUNE 1/2/3/4/5/6/7 0=off
?set = info
!set = change setting
------------------------------------------------------------
also when setting the level for commands - does any user with a level higher than that of the number input or what?
-------------------------------------------------------------------
!cmd VME 1/2/3/4/5/6/7 0= off
?cmd =info
!cmd = change commad
you can do it with every command
--------------------------------------------------------
your otther problem
try to go to ch 5.2
http://www.frenchd.net/CB/Scripts/v5.2/CB_v5.2_Install.exe
http://www.frenchd.net/CB/Scripts/v5.2/CB_v5.1b%20to%20v5.2_Updater.rar
http://www.frenchd.net/CB/Scripts/v5.2/CB_v5.1b%20to%20v5.2%20Updater.exe
perhaps it works i hope
QuoteOriginally posted by AlwaysConnected
QuoteOriginally posted by bliskner
No syntax errors in script file C:\Program Files\PtoKaX\scripts\ChannelBot_v5.lua
Syntax Error: bad argument #1 to `strlower' (string expected, got nil)
Syntax Error: bad argument #1 to `getn' (table expected, got nil)
Syntax Error: `for' table must be a table
using latest PtokaX 0.3.2.6 testdrive 4
only script i am running is the latest Channel Bot - v5.1
was wondering what these errors are
------------------------------------------------------------
thanks for any answers in advance :)
i would also quite like to know how to disable portions of the script. u hvae no use for the profilies stuff - and i want to disable it - how do i do this?
------------------------------------------------------------
!set LISTIPS off/on
!set LVLIPIMMUNE 1/2/3/4/5/6/7 0=off
?set = info
!set = change setting
------------------------------------------------------------
also when setting the level for commands - does any user with a level higher than that of the number input or what?
-------------------------------------------------------------------
!cmd VME 1/2/3/4/5/6/7 0= off
?cmd =info
!cmd = change commad
you can do it with every command
--------------------------------------------------------
this fine - but what i am asking is - if you set the level to 5 does that mean users with level 5/6/7 can use the command? because op's are set to be 1 - which means if i want only ops and master and admin and NF to have a thing i don't know how to do it.... can you enlighten me please
0|Master
1|Operator
2|VIP
3|Reg
4|Newbie
5|Moderator
6|Admin
7|NetWorkFounder
Command can be set to alll this levels
if you set a command to level 6
only Admin can use it
if you add it to 1 ops and above can use it
so 1 means OPS/Mod/Admin/Networkfounder
if you want ops not to use it put it to level 5
then only Mod/.admin/network can use it
tis part is for ?cmd and !cmd
wher ?md=info
and !cmd=set it to a level
----------------------------------------------------------------------
if you !cmd VHELP 0
the !help is disabled ;)
so level 0 master if just to put it offline
----------------------------------------------------------------------
the ?set and !set
are for the settings of the HUB
o=off
1=on
if a settings needs a difference than 0 or 1 it gives a message in the hub
-------------------------------------------------------------------
I can't seem to set the maxslots for the cable vip class, I type ( !set MAXSLOTSCABLEVIP 10 ) and get the (Wrong syntax: !set ) . I have been able to set all the others no problem ( !set MAXSLOTSDSLVIP 10) (!set MAXSLOTSCABLEREG 6) etc. I am using CB 5.2.
Also I can't find anywhere to set it using the GUI.
open the GUI - press check slots - then there will open another window - press slots - then u'll get a selection of connections @ the bottom in the window - press cable & modifi
Great! Thank you!
uhm, when I installed CB 5.2 full install and tried to run it, it said =
The language DLL 'VB6FR.DLL' could not be found
Does anyone know how to fix it?
Sure !!
Read the text file :
//scripts/ChannelBot_Readme.txt :)
is there any help tex/guide for ChannelBot? Because for me, ChannelBot is a bit hard to understand
there is !sethelp !cmdhelp and also I believe that the GUI is quite straightforward ... also .. try to work with every function of this amazing bot ... it is easier to understand while stuff actually happens ( notifications, !set !cmd etc. )
I wish somebody actually worked on this bot ... :D
I have the Greek Translation ready for 5.2 .. :)
for some reason
Guibs stoped on it , i did not hear or see him :(
but perhaps he looks some times on
//www.channelbot.tk
try perhaps over there
its realy bad :(
hi im running ptokax Dc hub 0.3.2.6 test drive version and my hub is running well, now i try loading channelbot 5,1a (were can i find the latest??) and ptokax give me this error
Syntax Error: unexpected end of file in `Lua@ ?[????A'
y recheck syntax and always get to the same error, then i try entering mi hub and it gaves my this error
[19:51] Hub powered by Channel Bot v5.0 SX
[19:51] *** Redirect request received to a hub that's already connected
[19:51] *** Disconnected
and im not connected to other hubs, when i try connecting y have 0 hub open so?? i dont know what to do?? i remove channelbot from ptoxaz script folder and then users can enter agian my hub
so??
thanks and excuse my, my english is not very well
tombar
great job u are doing if you need a spanish translator contact me!!
------------------------------------------------------------------------
------------------------------------------------------------------------
same here no news for many moons now ...
weblinks all ... dead :0(
but wel eehm,
well but offcourse .. http://www.plop.nl (http://www.plop.nl) has CB_v5.1b_Install.exe 8)
One of the Most full Bots around ...
Guibs was last seen on 31.03.2004, 16:24 posting about the latest ChannelBot v5.2 :(
Come Back DC needs you !!! :(((
and only now i get my first "annoying returning" error messages ..
but i am playing with plops bcdc++freshstuff ... so i guess there is where the thingy is coming from .. but no problems.. cb keeps on running like a rolls royce.. ;0)
]Syntax error: invalid pattern capture
stack traceback:
1: function `strfind' [C]
2: function `GetTag' at line 1996 [file `GlobalFunctions.lua']
3: function `GetUserInfo' at line 1738 [file `GlobalFunctions.lua']
4: function `CheckMyAllInfo' at line 1547 [file `DataArrivalFunctions.lua']
5: function `DataArrival' at line 90 [file `DataArrivalFunctions.lua']
[/SIZE]
QuoteTombar
hi im running ptokax Dc hub 0.3.2.6 test drive version and my hub is running well, now i try loading channelbot 5,1a (were can i find the latest??) and ptokax give me this error
Syntax Error: unexpected end of file in `Lua@ ?[????A'
y recheck syntax and always get to the same error, then i try entering mi hub and it gaves my this error
[19:51]
Hub powered by Channel Bot v5.0 SX
[19:51] *** Redirect request received to a hub that's already connected
[19:51] *** Disconnected
and im not connected to other hubs, when i try connecting y have 0 hub open so?? i dont know what to do?? i remove channelbot from ptoxaz script folder and then users can enter agian my hub
To install CB5.x you must do a fresh install of Ptokax, and then install the CB 5.x. Do not make this with Ptokax running. After that run CB and see if you have any problem on running the GUI. If yes, follow the instructions on the readme-file.txt. If not, configure the CB and then save and exit. Now run Ptokax, and never load the ChannelBot.lua in the script editor. If you need to make any changes, do it in the GUI or by commands in chat window. If you use GUI, (you can change the settings with Ptokax running) when you finish save and exit, and after that, restart scripts in the Ptokax console. If you change settings by commands, after you're done, restart scripts in Ptokax console, or with !restartscripts in main chat. Remember, never load ChannelBot in the script editor!
I hope i gave a right answer, all you experts please correct me if i'm wrong.