QUESTION FOR ADMINS:
Is it possible that psf8500 could get a own section in the forum called DC++k CDM where he could be a moderator of his project?
He now uses a previous developers thread on a forum where he so far got no moderator rights. I think that the dc++k scanner does a lot of things close to "fake hunting scripting" and such a section here would also bring us new users to this forum.
I have not mentioned this for him, but i would like to ask u admins here first, he might say yes if he got offered a section here. ;)
DC++k CDM Project (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/)
Not a bad idea......
this client have few bugs & here he will have enough support cause here are a lot of hubowners :D
Realy good idea, im using iDC++ DC++k /CMD and need some help with it..
let?s role... :D
QuoteOriginally posted by acethecase
Realy good idea, im using iDC++ DC++k /CMD and need some help with it..
let?s role... :D
what kind of help?
i made some thing that is working
i can post it in here if you want ?
(http://home.planet.nl/~feer0011/123.JPG)
Junk file = 1615000000
Bin file = 1615000000
Vob file = 1615000000
Percent = 10
Raw command=$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|<%[mynick]> %[mynick] is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] Read the warnig message|
it does a !warn and after 3 warns it will be bannend
( i use robocop as bot)
(http://home.planet.nl/~feer0011/1234.JPG)
On all lines you want to check put
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]|$Kick %[nick]|
it kicks the user with the TXT rulebraker
Greets AC :)
---------------------
acethecase
Your picture links to your local C: thats not good :D
TNX M8 verry useful info!!!
yeah I know about picture :O :baby: I made a misstake lol.. il remove my post..
In Raw command u have / Read the warnig message /
Is it reading from / Client it self / or Robocop /
one more thing can u pls tell me what to put in /forbidden files
If I dont want users with installd app.
Tnx for ur help ;)
QuoteOriginally posted by acethecase
TNX M8 verry useful info!!!
yeah I know about picture :O :baby: I made a misstake lol.. il remove my post..
In Raw command u have / Read the warnig message /
Is it reading from / Client it self / or Robocop /
one more thing can u pls tell me what to put in /forbidden files
If I dont want users with installd app.
Tnx for ur help ;)
Read the warning message shows up after in the main the warning message has been showed ;(
forbidden file i have not used it but see where it is
perhaps give me an idea where to find it :D
AC thx 4 that pic & desc.
VERY HELPFULL :D
DC++k cmd 2.4 (http://home.planet.nl/~feer0011/ptokax/DCk-CDM-v2.4.rar)
it has all the settings as above posting 8o
ty AC for ur help..
Btw my foult about /forbiddenfile it is for iDc++ or Dc++k
but still need to know how to stop users with instaled files-
:D
QuoteOriginally posted by acethecase
ty AC for ur help..
Btw my foult about /forbiddenfile it is for iDc++ or Dc++k
but still need to know how to stop users with instaled files-
:D
i try to find out how that work
looks fine :D
1 - search the forum for a forbidden files script
2 - use it
3 - Be happy :)
LMAO
Well it's nice to see the activity on this forum, but with all respect i willl have to mention that this is the "your opinions about the forum" & it was a request from me to the admins.
Now this has become a "how to use DC++k CMD" thread instead, thats totally offtopic. so maybe the offtopic section should be used for that ;)
I'm still waiting for a reply from admin/admins, & if any of u moderators have contact with him, make him have a look at my Q.
Thanks
Roy
New official DC++k CDM thread at Imperialnet (http://www.imperialnet.org/forum/)
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]|$Kick %[nick]|
not shown in main ?? any ideas?
Hia))
Roy,,, does that "New official DC++k CDM thread at Imperialnet " means you didnt got any response from admins here and that you asked for is out of the question now ???
Z ya
QuoteOriginally posted by oblivion
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]|$Kick %[nick]|
not shown in main ?? any ideas?
you must see this in the main
is kicking the rulebreaker Nickname (http://home.planet.nl/~feer0011/ptokax/rule.JPG)
if not you made the settings of dC++ to high so its shows in the box below the main
---------------------------------------
(http://home.rochester.rr.com/c4dc/rulespage.jpg)
that will be the updated version soon :D
hi
i have a question
/addforbiddenfiles
-system.ini is ok
but if i write underage
the bot is not kicking after underage files...
pls help :]
QuoteOriginally posted by anubis_say
hi
i have a question
/addforbiddenfiles
-system.ini is ok
but if i write underage
the bot is not kicking after underage files...
pls help :]
i think you could better ask that question
in here DC++k CDM (http://www.imperialnet.org/forum/index.php)
hi all !..
AC - updated version looks greeeat.. :D :D
u know relise date.!?
CyAM8:)
QuoteOriginally posted by acethecase
hi all !..
AC - updated version looks greeeat.. :D :D
u know relise date.!?
CyAM8:)
nope but i keep looking imperialnet.org :)
and when its done i will inform you ppl :)
QuoteMrZ:
Roy,,, does that "New official DC++k CDM thread at Imperialnet " means you didnt got any response from admins here and that you asked for is out of the question now ???
Yep, I tried, but i guess they were busy.
*** DC++k CDM V2.5 - 00:32 12/01/2004 ***
Moved some of the DC++k Detector settings into favourtie hub properties. This is to allow different settings for different hubs. You can also specify different raw commands for each offence. A user will only be considered cheating if the check box is ticked. The small text box next to "Disconnect filelist" allows you to specify how many disconnects are tolerated.
Added detection of BCDC++. This won't detect all BCDC.
Added some text boxes for bandwidth limit restrictions, but i haven't coded this yet so there disabled.
Partialy fixed "Check clients" and "Check filelists" ( "Check user" from userlist still dosen't work properly if you have "Check filelists" disabled... no idea why )
Fixed a few exceptions ( and probably created a few more )
Added a textbox to specify the +info command.
Added more info to /help showing all the DC++k / commands.
Fixed a bug with real share and junk share not being displayed properly in report/+info.
You can download it here (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.5.rar)
thnx to psf8500
more special info http://www.imperialnet.org/forum/index.php
----------------------------------------------------
i will look later today :)
yeeeeiiii I love it... :D :D tnx AC
just one question.
In favorite there is Dc++k Detector is it ok to write in every line this raw comand!?
<%[mynick]> is kicking the rulebreaker %[nick] because: %[cheatindescription]|$Kick %[nick]|
its the same Raw line as in client detection..
+ the picture `RULES?u show us before on the uppdate version,
where do I find it.or is it not included..
TY again AC :D :]
QuoteOriginally posted by acethecase
yeeeeiiii I love it... :D :D tnx AC
just one question.
In favorite there is Dc++k Detector is it ok to write in every line this raw comand!?
<%[mynick]> is kicking the rulebreaker %[nick] because: %[cheatindescription]|$Kick %[nick]|
its the same Raw line as in client detection..
+ the picture `RULES?u show us before on the uppdate version,
where do I find it.or is it not included..
TY again AC :D :]
i make a update a s a p :)
gtg to work now
niiiceee M8 , oki cya ltr .dont work to much :] :D
QuoteOriginally posted by acethecase
niiiceee M8 , oki cya ltr .dont work to much :] :D
nope :)
i have seen it its looks real great :D
hi me agian made some things ;)
(http://home.planet.nl/~feer0011/ptokax/dckupdate.JPG)
the lines i used are:
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]| $Kick %[nick]|
pay attention to the space beweteen
| $Kick %[nick]
and i used
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|<%[mynick]> %[mynick] is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] Read the warnig message|
i am not sure about 2 things
What mut be set @ Info Cmd
and Disconnect Filelist
is some knows please add it here
Version update fto download in few moments
hm, for 30 seconds DC++k CDM V2.5 close
3 hubs 1400/1450/800 users
Unhandled Exception
Code: c0000005
Version: 0.25105581k - Client Detection Mod
Os: Server Service Pack 1, v.1069
Call stack info:
DCPlusPlus!0x0041BF1F : ?
DCPlusPlus!0x0041E4E6 : ?
DCPlusPlus!0x0040A3B4 : ?
USER32!0x7E45698B : GetMessageW
Unhandled Exception
Code: c0000005
Version: 0.25105581k - Client Detection Mod
Os: Server Service Pack 1, v.1069
Call stack info:
DCPlusPlus!0x0041BF1F : ?
DCPlusPlus!0x0041E4E6 : ?
DCPlusPlus!0x0040A3B4 : ?
USER32!0x7E45698B : GetMessageW
------------------------------------
owner for Latvian hub ALFA
//www.hub.lv
----small update----
found by XeroX?
With 2.5 when u do /checkshare it only checks like 50 ppl then stops checking .. and also new users arent getting checked while doing /checkshare .. /startchecking seems to work allright
-------------
commands must be typed in the main
you muse see this info
[18:02] Initiating share check
[18:03] Starting continous user checking with the default wait time.
DC++k Cdm 2.5 (http://home.planet.nl/~feer0011/ptokax/DCk-CDM2.5.rar)
it give some dc++ unhandeled error
there will be an update later this they
if its not too late :)
i will make a update :P or it will be ehre tomorrow
DC++k cdm 2.51 updated (http://home.planet.nl/~feer0011/ptokax/DCk-CDM-v2.51.rar)
*** DC++k CDM V2.51 - 20:01 12/01/2004 ***
Fixed an exception error that a lot of people were having problems with.
--psf8500--
Greets AC;)
tnx !!
QuoteOriginally posted by acethecase
tnx !!
np
y v w
GR AC :)
QuoteOriginally posted by Zigurds
hm, for 30 seconds DC++k CDM V2.5 close
3 hubs 1400/1450/800 users
Unhandled Exception
Code: c0000005
Version: 0.25105581k - Client Detection Mod
Os: Server Service Pack 1, v.1069
Call stack info:
DCPlusPlus!0x0041BF1F : ?
DCPlusPlus!0x0041E4E6 : ?
DCPlusPlus!0x0040A3B4 : ?
USER32!0x7E45698B : GetMessageW
Unhandled Exception
Code: c0000005
Version: 0.25105581k - Client Detection Mod
Os: Server Service Pack 1, v.1069
Call stack info:
DCPlusPlus!0x0041BF1F : ?
DCPlusPlus!0x0041E4E6 : ?
DCPlusPlus!0x0040A3B4 : ?
USER32!0x7E45698B : GetMessageW
------------------------------------
owner for Latvian hub ALFA
//www.hub.lv
Download the DC++k v2.5.pdb & put it to your client then u r able to see where the errors are from...
DC++k-CDM-v2.51 not work, for 5 min. no check on new users connecting, all connections close
2 times show title Unhandled Exception
-------------------------------------
owner for Latvian hub ALFA
//www.hub.lv
hey M8s if u wanna know what the unhandelt exeption is use the .pdb file to locate it. I t will be written in exeptioninfo.txt
Hi all...
My usera are only getting 1 warning insted off 3 times and then user gets kicked..
Is there somewhere to change so that users are getting 3 warnings than kicked..
QuoteOriginally posted by Zigurds
DC++k-CDM-v2.51 not work, for 5 min. no check on new users connecting, all connections close
2 times show title Unhandled Exception
-------------------------------------
owner for Latvian hub ALFA
----small update----
found by XeroX?
With 2.5 when u do /checkshare it only checks like 50 ppl then stops checking .. and also new users arent getting checked while doing /checkshare .. /startchecking seems to work allright
-------------
also must be use for 2.51 version
[QOUTE]
acethecase
Hi all...
My usera are only getting 1 warning insted off 3 times and then user gets kicked..
Is there somewhere to change so that users are getting 3 warnings than kicked..
[/QOUTE]
-----------------------------------
The !warn is buildin with Robocop
so you must look there
this is so unstable
crashed the hub 3 times now ,with execption errors
:(
yup
i did some restyling of the cheks it runs now more stable
1 /startchecking 500
2 removed the thing at BCDC++ check
3 uncheck the Filelist Exceptions
4 uncheck Unavailable flielist
works no stable
i'll keep you updated
another thing i notice in this is , the users list ,only half of the list users have a green C ,others show blue!!
why is this ??
QuoteOriginally posted by oblivion
another thing i notice in this is , the users list ,only half of the list users have a green C ,others show blue!!
why is this ??
Green C user checked and OK
Red C user checked and Not OK
Bleu User , users that have to be checked
Red users with wall firewalled users
yes but all users have been checked the check que is complete..half show blue ???
QuoteOriginally posted by oblivion
yes but all users have been checked the check que is complete..half show blue ???
hmz
Bleu is also that persons wants or you want connection with
perhapos you need to clean your file list map
could be some messed up
well im gonna continue with using the more stable black dc
untill i am totally confinced to use cdm :)
Thnx to Egus
http://www.imperialnet.org/forum/viewtopic.php?t=193
--------------------------------------------------
Found a new goodie :)
in the Fave you can enter some thing into the
Info command
if you do like
!, + , # , $ ,@
what ever you want ;)
i prefer !
you can then doe
!info
in the opchat :)
the result looks like this
[21:52:22] !info (NL)Janto
[21:53:41] <=T-G-T=>
*** Info on (NL)Janto ***
Client: DC++
Lock: EXTENDEDPROTOCOLABCABCABCABCABCABC
Pk: DCPLUSPLUS0.306ABCABC
Tag: <++ V:0.306,M:A,H:5/2/4,S:10>
Supports: BZList MiniSlots GetTestZBlock
Downspeed: N/A
IP: XXXXXXX
Host: XXXX
Description
Email
Connection Cable
Stated Share 6.88 GB (7387590127 B)
Real Share N/A
Junk Share N/A
Cheat status
Will show up if the user was checked :)
if the user is not check you will get this
[21:51:06] !info (NL)bomarlon
[21:51:07] <=T-G-T=> I have no info on (NL)bomarlon
i gone love this ;)
Is it possible to get an url to a possible place with languagefiles to DC++K??
It?s me again :)
Someone who have an url for the newest DC++K, it seems that every time i find a new version an opens it, it still say that there are a newer version than the one i use
QuoteOriginally posted by Gnuff
It?s me again :)
Someone who have an url for the newest DC++K, it seems that every time i find a new version an opens it, it still say that there are a newer version than the one i use
Is it possible to get an url to a possible place with languagefiles to DC++K??
latste version
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
language
try others xml file no idea where to find it
http://dcppk.has.it/
found the info there
----------------------------------------------
DC++k Cheat Check Guide
------------------------------
Table of contents
Introduction to DC++k
Explanation of all the cheat checks
Settings for the checks
The RAW Command
Main chat commands
DC++k mirrors
Introduction to DC++k
----------------------------
DC++k is an "OP-mod" of DC++. It has a number of features that are designed to find cheaters in different ways. You can choose to either have DC++k report cheaters to You in main or to send a "RAW command" upon finding a cheater. The RAW command could for example be a kick+ban or simply a report to your hubs OP-Chat. Some of the checks are more reliable than others, remember that scenarios explained as "unlikely" below in fact can happen. (but it is very unlikely ;) I suggest you start with using DC++k as a pointer to cheaters, you can check users manually when DC++k reports them. After a while, when you have learned to trust the app you can begin using it in "auto-mode" :)
The checks in cronological order (with all options ON)
--------------------------------------------------------------- Below follows a description of the different checks DC++k can make. All of them can be turned on/off. The italic text in the "CHEATER!" line shows how DC++k reports the cheat. It is also what ends up in the %[cheatingdescription] parameter for that user, you can use %[cheatingdescription] in the RAW commands you want to send.
Too even share size!
DC++k recieves the sharesize from the user (from $MyInfo) and looks for 2 things in the byte size:
a) if the byte size contains 6 or more zeroes in a row..
CHEATER! (ex. User - Too even share size - 36772010000000 B = 33.44 TB - the share size had too many zeroes in it)
A normal share is VERY unlikely to be this even, it's so unlikely we can consider him a cheater directly!
b) if the byte size divided by 1 MB (1048576 bytes) gives an integer..
CHEATER! (ex. User - Too even share size - 118648471552 B = 110.50 GB - the share size was divisible by one megabyte)
Many fakeapps use one MB as a base and let's you multiply that to get a big share, so the integer you get is the multipler!
As I'm sure you understand a normal share will NEVER give an integer, yes it is possible..
but that possibility is so slim I can't even see it with my glasses on. ;)
No slots available for filelist despite DC++!
DC++k now tries to get the filelist from the user, if it recives "No Slots" from a DC++ user..
CHEATER! (User - No slots available for filelist despite DC++)
Beware! DC++ have 3 "extra slots" for filelists and small files, they could potentially all be full! (not likely though)
If DC++k recieves "No slots" from a user without DC++ nothing will happen.
Could not open target file!
DC++k gets a slot but then recieves "Could not open target file"..
CHEATER! (User - Could not open target file - "Error msg")
Too small filelist!
DC++k starts the download of the filelist and immediatly checks its size. If the size is less than 100 bytes..
CHEATER! (ex. User - Too small filelist - 14 B for the specified share of 208.11 GB)
A filelist with size 14 B always means a 0-byte share.
Too large filelist!
If a filelist is larger than the value set (default is 10 MB)..
CHEATER! (ex. User - Too large filelist - 11 MB)
The reason for this is that some users use a uploadlimited client in conjunction with a fake,
huge filelist to make checking their filelist impossible (or at least take huge loads of time,
during which the evil user can download all they want from the users on your hub).
Beware! Setting the allowed filelist size too low will mark many innocent users as cheaters.
Disconnected when downloading filelist!
The downloading of the filelist proceeds, if DC++k recieves "Disconnected" during download..
CHEATER! (User - Disconnected when downloading filelist)
Beware! This will be triggered even if it is Your bad connection that causes the disconnection!
FileListException Error during decompression!
When DC++k have downloaded an .bz2 filelist it unpacks the file,
if it gets an "Error during decompression" (ie. the compressed file is corrupt)..
CHEATER! (User - FileListException Error during decompression)
Beware! This don't have to be an intentional cheat by the user.
It could possibly be Your client that did something wrong in the decompressing sequence!
If not, this is not a filelist at all or the users client didn't compress it correctly. Either way, the filelist is useless to other users!
Mismatched share size!
When the filelist is downloaded and decompressed DC++k compares the stated MyInfo share size
to the real share size in the filelist. If the sizes don't match..
CHEATER! (ex. User - Mismatched share size - zero bytes real size, stated size = 32.93 GB, real size = 0 B)
This will only be triggered if the sizes mismatch more than the "Percent fake share accepted" in settings.
(ie. if you set 10% allowed fake share and the real size is 100 GB, the stated share
have to be more than 100 GB * 1.10 = 110 GB for the user to be considered a cheater)
Beware! It is a known fact that the buggy NMDC client occasionally reports the wrong share size!
Junk files found!
After share size check comes the one for junk files. (ie. files larger than the size you have set)
The stated share is compared to the filelist share minus the junk files size.
If they mismatch more than the "Percent fake share accepted"..
CHEATER! (ex. User - Junk files found - 81.11 GB was junk, Stated share = 102.48 GB, Real share = 21.37 GB)
Files containg $ (dollar sign) is also considered junk since they are impossible to download
due to that the dc protocol uses the dollar sign in the commands.
When "Any junk files is equal to fakesharing" is activated DC++k considers any user with
one (or more) junk files to be cheating. Regardless of what you set "Percent fake share accepted" to.
Forbidden files!
DC++k keeps a list of files (specified by the user of the program) which are "forbidden".
This means that anyone with the specified file (and in the specified path if any) will be considered
a cheater. This is very useful for weeding out users which persist in their wish to share their
"Program Files" or Windows directory. So if anyone have a forbidden file..
CHEATER! (ex. User - Forbidden files : DC share hacker.exe)
Back to the top
Setting up the checks (when checked, feature is..)
-----------------------------------------------------------
Settings > DC++k Detector 2 - "Consider too even share size to be cheating" (on)
Settings > DC++k Detector 2 - "Consider fileList not available despite DC++ to be cheating" (on)
Settings > DC++k Detector 2 - "Consider "Could not open target file" regarding filelists to be cheating (on)
Settings > DC++k Detector 2 - "Consider fileList too small to be cheating" (on)
Main chat command: /filelistmaximumallowedsize abc (abc = allowed size in bytes)
Settings > DC++k Detector 2 - "Consider disconnecting when downloading filelist to be cheating" (on)
Settings > DC++k Detector 2 - "Assume that exeptions with filelists means that the user cheats" (on)
Settings > DC++k Detector tab - "Percent fake share accepted" (integer for allowed fake %)
Settings > DC++k Detector tab - "Ignore junk files altogether" (off)
"Junk file size", "BIN file size" & "VOB file size" (in bytes, any file over this is considered junk)
Settings > Advanced tab - "Any junk files is equal to fakesharing" (on)
Main chat commands: /addforbiddenfiles /showforbidden /removeforbiddenfiles
You can also use /addforbiddenfiles in the user commands which makes it possible to
right click a file in the seearch to add it to the list! (command: /addforbiddenfiles %[filename])
BETA! The ADL-Search has been modded with a "Forbidden File" checkbox..
check it to make the files found, forbidden!
Back to the top
Setting up the RAW Command!
-------------------------------------
The raw command is (as it states) a completely RAW command, sent directly to the hub, no changes are made!
This means you can send whatever your client sends when you click buttons and menues in you app. :)
For example: if you wanna recreate clicking "Kick user" in the nicklist right click menu, you need 3 commands:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: KICKMSG HERE|
This command will send a msg to the user you are kicking, %[nick] is the cheater %[mynick] is you, you can replace
"You are being kicked because: KICKMSG HERE" with anything you want, I use %[cheatingdescription]
which will give you a neat suitable msg for each cheat! :)
<%[mynick]> %[mynick] is kicking %[nick] because: KICKMSG HERE|
This command sends the msg to mainchat, same here.. write want you want for message.. I don't
use "%[mynick] is kicking %[nick] because: KICKMSG HERE", I just send %[cheatingdescription]..
However, using the standard kick-msg makes it possible for users to filter them out like normal kick-msgs.
$Kick %[nick]|
(must be Operator to send this)
Finally, this tells the hub that the user should be disconnected. As you can see,
the "SomeOP is kicking SomeFaker" msg in main chat has nothing to do with the actual kick.
Ofcourse, you only have 1 line to write raw commands, you just put them together, like this..
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[cheatingdescription]|<%[mynick]> %[mynick] is kicking %[nick] because: %[cheatingdescription]|$Kick %[nick]|
More examples:
Sending command "+ban " to bot "ScriptBot".. $To: ScriptBot From: %[mynick] $<%[mynick]> +ban %[nick]
|
Sending a report to "OP-Chat".. $To: OP-Chat From: %[mynick] $<%[mynick]> %[nick] - %[cheatingdescription]|
Sending command "!ban " to main chat.. <%[mynick]> !ban %[nick] |
Sending a cheater report to yourself.. $To: %[mynick] From: %[mynick] $<%[mynick]> %[nick] - %[cheatingdescription]|
Redirecting a user.. $OpForceMove $Who:%[nick]$Where::$Msg:|
You can also use the checkbox "Kick after sending raw command", this will send
the normal $Kick %[nick] but with a 500 ms delay, this will give your script
time to do it's job before the kick :)
Back to the top
List of main chat commands!
----------------------------------
/sharecheck - will start a filelist check of all users in the hub
/stopsharecheck - stops the check above
/startchecking - will start a continous checking of users in the hub
/stopchecking - stops the above checking procedure
/addforbidden - adds filenames/paths to the forbidden files list
/removeforbidden - remove the filenames/paths you added above
/showforbidden - display the forbidden files list
/reportcheaters - will give you a list of all found cheaters (that are still in the hub)
/filelistallowed - sets the maximum allowed filelist size
/raw - sends directly to the hub (raw command)
/chatonly - puts the current hub in chat only mode, can't download, can't upload
/version - overrides your client version
/multeedition - who knows!?
Back to the top
--------------------------------------------------------------------------------
Author of this document: CyberAL @ TropiCo.se
Addy to this page: http://dcppk.has.it
DC++k creator is: sarf
DC++k homepage mirrors:
http://www.fukt.bth.se/~k/dcpp/
http://www.student.bth.se/~pt00akr/dcpp/
http://hem.passagen.se/sarf/dcpp/
http://nono25.free.fr
Official DC++k Forum
DC++k thread @ DC++ Forum
-----------------------------------------------------------------------
!!! DON'T RUN THESE CHECKS IN ANY HUB WITHOUT THE OWNERS PERMISSION !!!
-----------------------------------------------------------------------
Back to the top
--------------------------------------------------------------------------------
thnx AC
;)
Look what i found :)
no i did no found it :)
but it looks great :)))
thnx to Sulan form http://www.imperialnet.org/forum/viewtopic.php?t=230
DC++kCMDGuide (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC__kCMDGuide.zip)
if have not studyed yet but it looks great
have phun with it
and leave some nice comments to Sulan
hehe AC u just find more & more usefull stuff out there!
tnx M8, Ill allso send post to Sulan for nice guide..
Cya AC..
New version is out :
DC++k-CDM-v2.52
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/ (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/)
QuoteOriginally posted by acethecase
hehe AC u just find more & more usefull stuff out there!
tnx M8, Ill allso send post to Sulan for nice guide..
Cya AC..
New version is out :
DC++k-CDM-v2.52
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/ (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/)
nice ;)
lets do some checks later today :D
aiight lets do so.. but first ..I have hade some problems with my computer, so I hade to clean it from everything..
Now Im like new born lol...
ok first: do I realy have to install Dc++ or can I just take
DC++k CDM and source, and put alltoghether in folder.
without installing anything..
second: Dc++k cdm also have / Check Client & Check files,
if check files is working then there is no need to use DC++k for checking files, correct!??
catch u ltr u tha man AC :D :D
DC++ CDM Guide (http://home.planet.nl/~feer0011/DCCDM/dckcdm.html)
QuoteOriginally posted by acethecase
aiight lets do so.. but first ..I have hade some problems with my computer, so I hade to clean it from everything..
Now Im like new born lol...
ok first: do I realy have to install Dc++ or can I just take
DC++k CDM and source, and put alltoghether in folder.
without installing anything..
second: Dc++k cdm also have / Check Client & Check files,
if check files is working then there is no need to use DC++k for checking files, correct!??
catch u ltr u tha man AC :D :D
First answer = Yes
second= yups DC++ k cdm is all you need ;)
New version DC++k-CDM-v2.52 well work
hm, but me production this v2.6
--------------------------------
owner for Latvian hub ALFA
//www.hub.lv
QuoteOriginally posted by Zigurds
New version DC++k-CDM-v2.52 well work
hm, but me production this v2.6
--------------------------------
owner for Latvian hub ALFA
//www.hub.lv
yup same to me ;)
i think psf8500 made a typing error ;)
------
*** DC++k CDM V2.52 - 02:17 15/01/2004 ***
Maybe/maybe not fixed checking dying when using check users as they enter the hub (if it don't work use /startchecking that should work).
Fixed a runtime error caused by filelist exceptions.
Added some more client detection. Thanks goes to Hell-Razor for the modified User.cpp he sent me.
---
hmm. nah its 2.52. i compiled it at 2am and was tired, hence the typo in the title bar
------
the details
QuoteOriginally posted by AlwaysConnected
Bleu User , users that have to be checked
not completely true :P
blue is a non NeoModus Client
green user (not green c) is a NeoModus client
but true, both have to be checked ;)
I think it's the same with firewalled users
red user and wall = NeoModus firewalled (I think)
blue user and wall = Non NeoModus firewalled (that I'm sure of)
cheers
QuoteOriginally posted by yepyepyep4711
QuoteOriginally posted by AlwaysConnected
Bleu User , users that have to be checked
not completely true :P
blue is a non NeoModus Client
green user (not green c) is a NeoModus client
but true, both have to be checked ;)
I think it's the same with firewalled users
red user and wall = NeoModus firewalled (I think)
blue user and wall = Non NeoModus firewalled (that I'm sure of)
cheers
thanks YepYep :)
*** DC++k CDM V2.6 - 10:12 16/01/2004 ***
Added more Client detection... Reverse connect, Backyard, QuickDC.
Added some more settings to "Settings > DC++k" to allow you to select which clients you consider to be hacked.
These clients will have the "Hacked DC++" raw command sent if they are detected.
Added version update notification. Enable "Download version XML-file" in Settings > Advanced to be notified of new versions.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
---------------------------------
but its no on the link yet will come soon
[edit]
its there :)
DC++kcdm 2.6 (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.6.rar)
-----
Dc++k cDM guide Updateded (http://home.planet.nl/~feer0011/DCCDM/dckcdm.html)
Hi AC & others , how u feeling today M8.
Is testing going on good for u, I have good news..
Everything is working fine for me /for now :D / only clean users in hub :] , The / Allow you to select which client you consider to be hacked / is great--
Ok Ill catch u ltr / back to testing board
Btw "XML-file" is not working for me,
it says that new version is out all the time.. So I skipp XML-file..we have you for info hahaha :D ..just kidding!
One more thing this threead is getting big , I think its betther if
we can have section DC++k CDM in forum..but thats only my thinking-
QuoteOriginally posted by acethecase
Hi AC & others , how u feeling today M8.
Is testing going on good for u, I have good news..
Everything is working fine for me /for now :D / only clean users in hub :] , The / Allow you to select which client you consider to be hacked / is great--
Ok Ill catch u ltr / back to testing board
Btw "XML-file" is not working for me,
it says that new version is out all the time.. So I skipp XML-file..we have you for info hahaha :D ..just kidding!
One more thing this threead is getting big , I think its betther if
we can have section DC++k CDM in forum..but thats only my thinking-
Yup :)
found again a new Goodie 8)
/addforbiddenfile
then the use gets this :)
-----------------------------------------------------------------------
[15:43:09] <=T-G-T=> =T-G-T= is warning chris1234 because: Forbidden files :
\films\Ad-aware 6\Lang\Language-pack 2\INSTALL.LOG
\films\Ad-aware 6\INSTALL.LOG
\films\Teletekstbrowser\INSTALL.LOG
\films\Lavasoft\Ad-aware 6\Lang\Language-pack 2\INSTALL.LOG
\films\Lavasoft\Ad-aware 6\INSTALL.LOG
\films\iMesh\Client\INSTALL.LOG
\films\Outlook Express\msimn.exe
\films\WINDOWS\system32\wbem\Logs\setup.log
\films\WINDOWS\system32\dllcache\msimn.exe
\films\WINDOWS\repair\setup.log
\films\WINDOWS\LastGood\System32\DllCache\msimn.exe
---------------------------------------------------------------------
Abotu the xml update :)
its removed and gone now :D
and DC+k cdm
nah lets continu here ;) or and Admin must want it tooo ?
------------------------small note-----
if you also download the DC++k-CDM-v2.6-pdb.rar it seems to me is crashes less :D
----------------------small note--------
greeat--
Well I dont use /addforbiddenfile , beacuse Im not so familliar with wich files to add hehe...
Some users gets warnings without having bad files
but I use ADL Seach just to find files I dont want in my hub..
Can u help me out with what files to add to forbidden,
u can if u want to post me PM with picture so u dont
have to write it.. :]
This is what I have in my ADL Seacrh:
(http://[img]777.jpg)[/img] (C:%5CDocuments%20and%20Settings%5CeSSet%5CSkrivbord%5Cnamnl?s.JPG)
One more thing I want to get this message to user to not only in client!
(C:%5CDocuments%20and%20Settings%5CeSSet%5CSkrivbord%5C777.JPG)
and this is the mess in main chat!
<-=HaL=-> [BOT]C-D-M kicked user <[BBB]Ma> 1 time(s) - Reason: No reason given!
bloody RAW command hehe...
Cya
/addforbidden - adds filenames/paths to the forbidden files list
(http://members.lycos.nl/alwaysconnected%5Cforbiddenfile1.JPG)
------------------------------------------------------------------------
Below you see its added
(http://members.lycos.nl/alwaysconnected%5Cforbiddenfile2.JPG)
------------------------------------------------------------------------
/showforbidden - display the forbidden files list
(http://members.lycos.nl/alwaysconnected%5Cforbiddenfile3.JPG)
Below you see the list
(http://members.lycos.nl/alwaysconnected%5Cforbiddenfile4.JPG)
------------------------------------------------------------------------
/removeforbidden - remove the filenames/paths you added above
(http://members.lycos.nl/alwaysconnected%5Cforbiddenfile5.JPG)
----------------------------------------------------------------------
The esiast way to add the forbidden files it to open your
DCPlusPlus.xml and sear for _
See the picture below
(http://members.lycos.nl/alwaysconnected%5Cforbiddenfile6.JPG)
To ad use its in the ofrmat like this
Filename.txt|map|etc after a map or file donnot forget the | but the last file Donnot have a |
The file to use you could use them form your ADLSearch.xml
You can find it here (http://home.planet.nl/~feer0011/DCCDM/ADLSearch.xml)
And the things will be saved good when you closed your DC++k CDM when you do in the main screen
hehe like I allways say u are fast man, I dont get time to edit my post lol..
Nice work tnx allot Mr..
hehe
[BOT]C-D-M kicked user
1 time(s) - Reason: No reason given!
did u get any reason..
QuoteOriginally posted by acethecase
hehe
[BOT]C-D-M kicked user 1 time(s) - Reason: No reason given!
did u get any reason..
Yeeh we need a RAW command Specialist
Who knows it ?
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]| $Kick %[nick]|
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|<%[mynick]> %[mynick] is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] Read the warnig message|
message of DC++k cdm
20:49:16] <=T-G-T=> =T-G-T= is warning pluis because: Too small filelist - 53 B for the specified share of 228.80 GB
message from the hub
[20:49:16] <-=T-G-T=-> =T-G-T= warned user
1 time(s) - Reason: Read the warnig message
But it want some thing like this
<-=T-G-T=-> =T-G-T= warned user 1 time(s) - Reason:Too small filelist - 53 B for the specified share of 228.80 GB
so a mix of both, who knows it
Found some strange thing in DCkk+cdm 2.6
When i startup i enter /sharecheck and /startchecking
so far so good
but after a while is stops checking
so i close the check programm
And restart it again with /sharecheck and /startchecking
but when i see in my list all ppl will show up as a red C
the only wy to solve the prob is to go to the map where i have installed DC++k CDM and remove the sum folder Logs and FileLists
when i do a report on a user what has become RED C its tells me that the list of that user has Compression problem. But i cannot image thats it is on all 100 users which are in my hub.
The code is
Cheat status FileListException Error during decompression
----------------------------------------------------------------------
Sollution
----------------------------------------------------------------------
Probably something to do with the crash i fixed during decompression errors, 2.51 would have crashed in this situation.
Leaving filelist exceptions unchecked might be a good idea until i fix it. (psf8500)
------------
Greets AC ;)
hi Mr..
hmm thats sound starange, I dont get that error
/sharecheck and /startchecking is working with no problems,
user is check @ entrence and then after about 20 min user get checked again no problem so far.. red bricks gets warning or kick/ban.!
Im trying this Raw command @ the client check, u know about the thing we spoke yesterday.that it does not show in main/ the kick reason:
So Im trying this one but nonthing has happend yett/no kicks or bans .. I dont have many users to try it on hehe but Ill let u know if it works..
RAW COMMAND:
$To: %[nick] From: %[mynick] $<%[mynick]> is kicking the rulebreaker because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> !kick %[nick]|
Btw - AC im Baned fr ur hub ..cant come in now :D :rolleyes:
I use [BBB]aCe for name..
yep i have similar shit happen .... i do sharecheck , then it boots me out ..very strange
just wondering would it be possible ,to have a version
to download that has all the settings ready to go version...raw commands etc..instead of an idiot like me ,that has so many problems ....all we have to do is change a few small things if needed
QuoteOriginally posted by oblivion
just wondering would it be possible ,to have a version
to download that has all the settings ready to go version...raw commands etc..instead of an idiot like me ,that has so many problems ....all we have to do is change a few small things if needed
hint hint :)
see on my dc++k cdm guide
hint hint :)
more can i not give to jah ;)
why doz this command boot me
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]| !Kick %[nick]|
QuoteOriginally posted by acethecase
RAW COMMAND:
$To: %[nick] From: %[mynick] $<%[mynick]> is kicking the rulebreaker because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> !kick %[nick]|
Your Raw was tooo advanced the bot hub and script does not know it ;)
so we made togheter a smaal one
$To: %[nick] From: %[mynick] $<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype] - %[cheatingdescription]| $Kick %[nick]|
that one works ;)
but no 3 times kick rule with this :(
$To: %[nick] From: %[mynick] $<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype] - %[cheatingdescription]| $Kick %[nick]|
QuoteOriginally posted by oblivion
why doz this command boot me
<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype]| !Kick %[nick]|
some tmies it does , most of the times its remove or add a space after the | <--
QuoteOriginally posted by oblivion
but no 3 times kick rule with this :(
$To: %[nick] From: %[mynick] $<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype] - %[cheatingdescription]| $Kick %[nick]|
me and acethecase
are working on it
perhaps we make even a report to the opchat
this is checking to many people at once .. therefore
kicking everyone.. i need to not check as many users at once?
<(.UTH-UK.)-NN-XT> (.UTH-UK.)-?ltimate-BoUnCeR warned user 1 time(s) - Reason: Read the warnig message
<(.UTH-UK.)-?ltimate-BoUnCeR> (.UTH-UK.)-?ltimate-BoUnCeR is warning fully because: Disconnected when downloading filelist 4 times
<(.UTH-UK.)-NN-XT> (.UTH-UK.)-?ltimate-BoUnCeR warned user 1 time(s) - Reason: Read the warnig message
<(.UTH-UK.)-?ltimate-BoUnCeR> (.UTH-UK.)-?ltimate-BoUnCeR is warning [BBB]nolsang because: Disconnected when downloading filelist 4 times
<(.UTH-UK.)-NN-XT> (.UTH-UK.)-?ltimate-BoUnCeR warned user <[BBB]nolsang> 1 time(s) - Reason: Read the warnig message
<(.UTH-UK.)-?ltimate-BoUnCeR> (.UTH-UK.)-?ltimate-BoUnCeR is warning [N]Blackpunk0 because: Disconnected when downloading filelist 4 times
$To: Funk From: (.UTH-UK.)-?ltimate-BoUnCeR $<(.UTH-UK.)-?ltimate-BoUnCeR> is kicking the rulebreaker Funk because: Stealth DC++ - Responded to a request for a non-existant file with No Slots Available
not shown in main now... :*(
some show..some dont
QuoteOriginally posted by oblivion
but no 3 times kick rule with this :(
$To: %[nick] From: %[mynick] $<%[mynick]> is kicking the rulebreaker %[nick] because: %[clienttype] - %[cheatingdescription]| $Kick %[nick]|
when its checking clients, it does not have 3 kick/warning rule.. only checkfile have 3 kinc/warning!!
I dont know if u can make Raw command to have 3 time warning/kick..
the forbidden file kicker aint workin ,any ideas
i added r@ygold preteen ........... etc
i ticked and ....enterd with phantom dc ..also...no kick
Grrrrrrrrrrr :*(
QuoteOriginally posted by oblivion
i ticked and ....enterd with phantom dc ..also...no kick
Grrrrrrrrrrr :*(
the phantom dc can ke kicked out if you use the 2.6 version
and see in the dc++k cdm dc++k and mark it
about the forbidden file i am thinking about it
it would be better if dc++kcdm has the adlsearh available
QuoteOriginally posted by oblivion
$To: Funk From: (.UTH-UK.)-?ltimate-BoUnCeR $<(.UTH-UK.)-?ltimate-BoUnCeR> is kicking the rulebreaker Funk because: Stealth DC++ - Responded to a request for a non-existant file with No Slots Available
not shown in main now... :*(
some show..some dont
Try this one for the Client Detection
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> ?kick %[nick] %[clienttype] - %[cheatingdescription]|
IN Pm you see this
---------------------------------------------
[20:49:21] <=T-G-T=> You are being kicked because: Hacked DC++ - Bandwidth limiting DC++
----------------------------------------------
in the main you see this
----------------------------------------------
<-=T-G-T=-> The user
is now banned he's kicked 3 times - Reason: Hacked DC++ - Bandwidth limiting DC++
-----------------------------------------------
its working.
Allthough with this command ur telling them what they doing wrong in there faker client .. and makes em harder to detect next time
so you can make it a litte smaler for the Client detection
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|
--------------------------------------------------------------------
then it will show you in the PM and main
<-=T-G-T=-> The user is now banned he's kicked 3 times - Reason: Hacked DC++
------------------------------------------------------------------
For the DC++k detector i use now this one
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[cheatingdescription]||<%[mynick]> ?kick %[nick] %[cheatingdescription]|
------------------------------------------------------------------
Greets AC :)
Tomorrow or next week i want to find out how to get this info also in to the OpChat
i think its configured ok now ..accept for one thing
the forbidden files kicker..anybody else here have this working ok ??
btw many thanks to AlwaysConnected
your great help ..cograts on this great program
QuoteOriginally posted by oblivion
i think its configured ok now ..accept for one thing
the forbidden files kicker..anybody else here have this working ok ??
btw many thanks to AlwaysConnected
your great help ..cograts on this great program
the forbidden file is easy ;) :D
i will see and post a good example here tomorrow ;)
and acethecase you did also a good thing on the Raw command ;)
QuoteOriginally posted by AlwaysConnected
QuoteOriginally posted by oblivion
i think its configured ok now ..accept for one thing
the forbidden files kicker..anybody else here have this working ok ??
btw many thanks to AlwaysConnected
your great help ..cograts on this great program
the forbidden file is easy ;) :D
i will see and post a good example here tomorrow ;)
and acethecase you did also a good thing on the Raw command ;)
Dont know if my is the best way but wtf...It works great for me atleast =]
<%[mynick]> %[mynick] is kicking the fuckface %[nick] because: %[cheatingdescription]|$Kick %[nick]|
*EDIT*
The reason why I don?t let the faker know the reason is : If you are a faker...then you know it...I?ve put 25%
fake share acceptense..
No junk files...And thats the only reason why i don?t let fakers get an explanasion of why they are kicked :]
hi !!
one question.. it's posible in the last version this Tag??
<++ V:0.251,M:A,H:x/y/z,S:3>
because in the last version i see this :
<++ V:0.251,M:A,H:x,S:3> ?( ?(
thx & goodnight ! ;)
*** DC++k CDM V2.61 - 00:31 18/01/2004 ***
Added detection of CZDC++.
Added bandwidth limit rules for DC++. Small textbox is the minimum allowed bandwidth limit bigger textbox is for the raw command (not properly tested yet).
Bug with filelist exceptions still exists. Disable it for now... I am making progress on this
-------------------------------------------------------------------
but the lua was off for one day and see :)
-------------------------------------------------------------------
*** DC++k CDM V2.62 - 23:36 18/01/2004 ***
Fixed a bug with iDC++ and DC++k/DC++k CDM being detected as CZDC++.
Changed CZDC++ detection so that it waits until the TestSUR is complete before updating the client.
CZDC++ detection now follows the dont check OPs/favs rules.
Added Client identification in user description. DC++k CDM now has infront of it's DC++ tag.
Added detection of DC++k 0.251.
Added an option to consider DC++k CDM as hacked. Older versions without the Hopefully fixed the bug with filelist exceptions. No more having the whole hub marked as cheats for filelist exceptions (I hope).
Bandwidth limit detection now correctly detects L: tag.
----------------------------------------------------------------------
DC++ k cdm 2.62 (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.62.rar)
i will check it later today
kicking but not going into tempban ??
<(.UTH-UK.)-?ltimate-BoUnCeR> (.UTH-UK.)-?ltimate-BoUnCeR is kicking dfjkoor because: Too even share size - 199715979264 B = 186.00 GB - the share size was divisible by one megabyte
oh and the forbidden file checker still dos'nt work ?
QuoteOriginally posted by oblivion
kicking but not going into tempban ??
<(.UTH-UK.)-?ltimate-BoUnCeR> (.UTH-UK.)-?ltimate-BoUnCeR is kicking dfjkoor because: Too even share size - 199715979264 B = 186.00 GB - the share size was divisible by one megabyte
oh and the forbidden file checker still dos'nt work ?
forbidden file woks
but you need to do a lot of work
like
forbiddenname.avi forbiddenname.mpg
install.log install.txt
etc costst you a lot of time better wait till adl search is in it :)
the other better ask that on imperial forum
Pro tempore v2.62 work well, ops not banned
-------------------------------------
owner for Latvian hub ALFA
//www.hub.lv
QuoteOriginally posted by Zigurds
Pro tempore v2.62 work well, ops not banned
-------------------------------------
owner for Latvian hub ALFA
//www.hub.lv
nice :) it seems to be good :)
this client is getting better and better all the time...exellent work
cant wait for this adl forbidden
that would really make me happy
QuoteOriginally posted by oblivion
this client is getting better and better all the time...exellent work
cant wait for this adl forbidden
that would really make me happy
if well all want it :)
go to imporial net forum
and ask ask future if well all want it
perhaps psf8500 makes it
new version New link ;)
http://home.planet.nl/~feer0011/DCCDM/dckcdm.html (old still available)
http://www.dcppkcmd-guide.tk/ New :D
got this AC
Bad Gateway
The proxy server received an invalid response from an upstream server.
--------------------------------------------------------------------------------
Apache/2.0.48 (Unix) Server at //www.dcppkcmd-guide.tk Port 80
QuoteOriginally posted by [NL]trucker
got this AC
Bad Gateway
The proxy server received an invalid response from an upstream server.
--------------------------------------------------------------------------------
Apache/2.0.48 (Unix) Server at //www.dcppkcmd-guide.tk Port 80
thats a (dot)tk problem :(
try the otherlink
*** DC++k CDM V2.7 - 10:26 22/01/2004 ***
Added ADL search for forbidden files from later versions of DC++k.
Added option to send raw command if connection timeout is received a certain number of times.
Added new columns in user list for bytes shared, supports, and NMDC icon status.
Added more info to +info/report.
+info now always responds with what it has even if the client has not been checked yet.
Added detection of old version of DC-Gui (Thanks Dashes).
Improved NMDC Emulation detection (Thanks again Dashes). This will be improved even more soon.
Added detection of PTDC++ and MS++V.
------------------------------------------------------------
DC++k cdm 2.7 (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.7.rar)
i hope an dcpp cdm guide will be updated soon :)
thnx to pf8500 for making this
Working smmooth... 8)
Thnx ac for the update.
QuoteOriginally posted by [NL]trucker
Thnx ac for the update.
yeeh Cut and past ;) thats it
forbidden files...can i make so it pm's me ..not kick everybody
<(.UTH-UK.)-?ltimate-BoUnCeR> User (.UTH-UK.)-[Scream]Mao Forbidden files : 12 - Incestvisa.mp3 - Nirvana - tour over europe - 18 - rape me.mp3 - 11. Grapefruit moon.MP3 - 15 - Grapefruit moon.mp3 - Eddie Izzard - Glorious - 12 - A Huge Fuck-Off Horse.mp3
<(.UTH-UK.)-?ltimate-BoUnCeR> (.UTH-UK.)-?ltimate-BoUnCeR is kicking (.UTH-UK.)-[Scream]Mao because: Forbidden files : 12 - Incestvisa.mp3 - Nirvana - tour over europe - 18 - rape me.mp3 - 11. Grapefruit moon.MP3 - 15 - Grapefruit moon.mp3 - Eddie Izzard - Glorious - 12 - A Huge Fuck-Off Horse.mp3
<(.UTH-UK.)-ReAsOn 2.5> (.UTH-UK.)-?ltimate-BoUnCeR kicked user <(.UTH-UK.)-[Scream]Mao> 1 time(s) - Reason: Read the warning message
<(.UTH-UK.)-?ltimate-BoUnCeR> User (.UTH-UK.)-[PL][PSV]sven? Forbidden files : atari teenage riot - death of a president diy.mp3 - atari teenage riot - does not impress me.mp3 - atari teenage riot - press.mp3 - atari teenage riot - the virus has been spread.mp3 - atari teenage riot - Virus Has Spread.mp3
ok i solved that problem...
is the away in this you can confirm the user ok again,,back from the red C to green .after i see his files are fine after i checked them ??
example ::::::::: ----> Forbidden files : Nirvana - Rape Me.mp3
another thing ..would it be possible to auto force connection on timing out users...i notice some users get stuck while being checked
i force connection then it clears them,just fine
???????????
QuoteOriginally posted by oblivion
another thing ..would it be possible to auto force connection on timing out users...i notice some users get stuck while being checked
i force connection then it clears them,just fine
???????????
turn that mark button off and you done :D
Show share checked users (green C) ??this
CDM 2.71 released i'm in error?
QuoteOriginally posted by angelsanges
CDM 2.71 released i'm in error?
yup dc++k cdm 2.71 is out
QuoteOriginally posted by oblivion
another thing ..would it be possible to auto force connection on timing out users...i notice some users get stuck while being checked
i force connection then it clears them,just fine
???????????
i,m having difficulties adding a raw command to 2.71
are there more folks with this problem o is it just me?
and one thing i hate about dc++k if you minimise it it stops checking or is this just me again?
QuoteOriginally posted by [NL]trucker
i,m having difficulties adding a raw command to 2.71
are there more folks with this problem o is it just me?
and one thing i hate about dc++k if you minimise it it stops checking or is this just me again?
Raw command is set to 1024 :)
but thats tooo long so you get an error
but it does save the rawcommand , in the next version it will be 256 or 512
yup thats an other bug of dc++k so donnot minise it :)
QuoteOriginally posted by [NL]trucker
i,m having difficulties adding a raw command to 2.71
are there more folks with this problem o is it just me?
and one thing i hate about dc++k if you minimise it it stops checking or is this just me again?
yes i have same shit...this is the question that was'nt
answerd bt always connected to me...
to complete users checks i have to force connection
then it checks again
Well, i have the same problem with the rawcommands, and the program terminates, but it works fine when i open DC++K CDM2.71 agian
Hi all..
In Advance settings u have " Check users on login" that
one does not work so good , not for me do..
But when u star dc++kcdm type in main /startchecking
it will check all users and chack all new connected -
About raw- this is my raw I use and its working super-
-Tnx AC-
For Client check:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|
For file check:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|<%[mynick]> %[mynick] is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|
:] :]
QuoteOriginally posted by oblivion
QuoteOriginally posted by [NL]trucker
i,m having difficulties adding a raw command to 2.71
are there more folks with this problem o is it just me?
and one thing i hate about dc++k if you minimise it it stops checking or is this just me again?
yes i have same shit...this is the question that was'nt
answerd bt always connected to me...
to complete users checks i have to force connection
then it checks again
perhaps you can put it in
http://www.imperialnet.org/ as bug report
i donnot know it
*** DC++k CDM V2.72 - 23:15 25/01/2004 ***
Fixed some bugs with reverse connect detection (Thanks Dashes)
Fixed a stupid bug with crashes in fav hubs properties (and reduced the raw command max size to 512 characters)
Added sending of raw commands in user commands. Start your command with /raw to make it a raw command. eg /raw $Kick %[nick]|
Possibly fixed some more filelist exception bugs (i'll get it right eventually ).
Added some more links to the help menu.
----------------------------------------------------------
dc++k cmd 2.72 (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.72.rar)
thnx pfs8500
thanx AC
will test it :-))
QuoteOriginally posted by [NL]trucker
thanx AC
will test it :-))
:) oke
let us know the results
oke here is a pre report
first thing i noticed was that after i set it up like i did the old one that if i opened the properties again
by going to the hub in favorites-> properties that all the settings i had made were gone (:-
furthermore after a night of letting it run maximized it didnt log the fakeshares.
there were users with a red c that werent disconnected
or warned despite the commands i used
For Client check:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|
For file check:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|<%[mynick]> %[mynick] is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|
and there were no user with a green c at all.
what i did noticed was that he added more fakeclients to check :-)))
oh before i forget again the raw command line in settings is still grey i cannot enter any command there as i could in 2.62.
grrrrrrrr ?(
after putting the /raw command in front of
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|
i started dc++kcmd again and after a while i suddenly got disconnected :(
so i,m going back to 2.62 atleast that wone worked for me.
QuoteOriginally posted by [NL]trucker
oke here is a pre report
1 first thing i noticed was that after i set it up like i did the old one that if i opened the properties again
by going to the hub in favorites-> properties that all the settings i had made were gone (:-
2 furthermore after a night of letting it run maximized it didnt log the fakeshares.
3 there were users with a red c that werent disconnected
or warned despite the commands i used
4 For Client check:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|
5 For file check:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|<%[mynick]> %[mynick] is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|
6 and there were no user with a green c at all.
7 what i did noticed was that he added more fakeclients to check :-)))
8 oh before i forget again the raw command line in settings is still grey i cannot enter any command there as i could in 2.62.
1 happend to me also ;)
nah note pad solved me :)
2 mhz not seen that one
3 did you enter a mark button on dc++k detector ?
4 and 5 i have a better raw command ;)
ask messdia he gets it :)
6 strange but perhaps its ther because the favo raw command are gone
7 nice
8 true all are taken in the fave commands
QuoteOriginally posted by [NL]trucker
grrrrrrrr ?(
after putting the /raw command in front of
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|
i started dc++kcmd again and after a while i suddenly got disconnected :(
so i,m going back to 2.62 atleast that wone worked for me.
i have a working 2.72 :)
contact me later :)
i know where the prob is ;) i think
http://www.dcppkcmd-guide.tk
I fix it ;)
you can aslo get it from here
http://members.lycos.nl/alwaysconnected/
thnx
Someone who can help me out here??
I need a rawcommand which are NOT shown in main, but okay if it will be shown i the little field under main+ gives a notice in opchat with description.
Need a command for both kick and ban
Try this one, it will give the desired details in PM to faker and info in opchat : [OpChat] can be any other name..
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: [OpChat] From: %[mynick] $<%[mynick]> has kicked %[nick] because: %[clienttype] - %[cheatingdescription]|$Kick %[nick]|
this is for badfiles section :
To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: [OpChat] From: %[mynick] $<%[mynick]> has kicked %[nick] because: %[clienttype] - %[cheatingdescription]|
I like the option of sending the kickwarnings etc to the opchat and not in the little field below, because when a user did not configured his client at the right way, he will see all the messages.
DC++k detector
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] %[cheatingdescription]|<%[mynick]> is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|
------------------------------------------------------------------
Send a Warn to the user , a warn to the OpChat and a warn to the main
Bad Client version
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] - %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> ?kick %[nick] %[clienttype]|
----------------------------------------------
send a kick to the user, opchat and to the main
you can change of corse the
!warn by !kick or !ban
and the
?kick by !ban or !kick
:)
cpu_point wrote
Quotethis is for badfiles section :
Sorry, but i did?nt get that, what do you mean by that?
Thanks a lot AlwaysConnected, thats more my language he he
But the field in DC++K Detector is graymarked???
Damn i?m not awake enough i guess.. Maybe 36 jours uptime is too much for me, now that i?m getting old LoL
My mistake, i was looking in settins/DC++K Detector :O
Thanks for the raws AC, but the kicks still show up in main, am i doing something wrong??
This message came in main:
[00:32] !kick kuazo Too even share size - 8256000884736 B = 7.51 TB - the share size was divisible by one megabyte
Is it possible to get those away from main, or do they have to be there??
QuoteOriginally posted by Gnuff
Thanks for the raws AC, but the kicks still show up in main, am i doing something wrong??
This message came in main:
[00:32] !kick kuazo Too even share size - 8256000884736 B = 7.51 TB - the share size was divisible by one megabyte
Is it possible to get those away from main, or do they have to be there??
$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|
Try above one
*** DC++k CDM V2.73 - 23:38 28/01/2004 ***
Fixed bugs with %[file] etc not working in raw user commands.
Added +check to OpChat to allow remote manual checking of users.
Added an experimental feature to check for duplicate IP's across multiple hubs. When a user is checked all other connected hubs will be checked for the same IP. The results can be seen in +info/report. I'll add a raw command later that can be sent if the user is found to be in more hubs than his tag shows.
DC++kCDM 2.73 (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.73.rar)
http://www.imperialnet.org/forum/viewtopic.php?t=214
Hmm, seems like no matter which raw i?m using the kick still shows up in main.
Have even tryed all the raws from the guide, but same result, what am i doing wrong??
Gnuff
what main bot are you using it could be that it is because of your main script that it is showing messages in main.
I?m using Dc++0,306 for my self
The fakeChecker is running om DC++K CDM 2.73
I have been asking the same question in another forum too, and have got a lot of answers, but no matter which command i use it shows in main.
The last post i got is this:
Try this one, if it is the "?kick " that you dont want to see
Code:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[cheatingdescription] Any complanes please contact dkvip4@hotmail.com|$kick %[nick]|
But after a restart of DC++K CDM main lock like this:
[19:34] !kick weedewu
[19:37] !kick Fanta
at least the reason for the kick is not shown anymore, but it?s annoing for the users to see all those messages
perhaps try this one
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] - %[clienttype] - %[cheatingdescription]| <%[mynick]> !drop %[nick]|
Be sure you bot knows !drop <--
Thanks AC!
I think i got it now, som settings i also had to chance, now it?s not shown in main anymore
And a thanks to all other who have responded on this tread
QuoteOriginally posted by Gnuff
Thanks AC!
I think i got it now, som settings i also had to chance, now it?s not shown in main anymore
And a thanks to all other who have responded on this tread
perhaps explain what you did
some other ppl perhaps wat that to
:D
Hello how we make the forbiddenfiles to work.
I will have the bot to take the users who shaers preteen and things like that.
Please somebody help with this
Bounty 8)
QuoteOriginally posted by Bounty
Hello how we make the forbiddenfiles to work.
I will have the bot to take the users who shaers preteen and things like that.
Please somebody help with this
Bounty 8)
read here
http://board.univ-angers.fr/thread.php?threadid=958&boardid=18&sid=f1f69f795604e7fd7f3d37c346d25ee5&page=4
Hello how we make the forbiddenfiles to work.
I will have the bot to take the users who shaers preteen and things like that.
Please somebody help with this
Bounty 8)
I cant get it to works . I have add preteen and Lolita but nothings happen and I know I have 1 user with preteen .
So please help 8)
*** DC++k CDM V2.74 - 18:21 31/01/2004 ***
Added detection of XDC++ CDM, LuDC++ and SdDC++.
Duplicate IPs now get a red 'C' if in more hubs than there tag shows.
Added multi hub kick. Kicks all users with that IP in all connected hubs.
Bandwidth limit rules now apply to DCGUI.
Added auto force attempt after connection timeout (only works if your an OP).
Added option to hide the CDM tag (always shown if not OP).
Fixed a bug with iDC++ detection
------pfs8500----
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.74.rar
QuoteOriginally posted by Bounty
Hello how we make the forbiddenfiles to work.
I will have the bot to take the users who shaers preteen and things like that.
Please somebody help with this
Bounty 8)
I cant get it to works . I have add preteen and Lolita but nothings happen and I know I have 1 user with preteen .
So please help 8)
first use the /addforbiddenfile
if you are done
use /sharecheck and /startchecking in the main of the DC++k cdm
See also here (http://board.univ-angers.fr/thread.php?threadid=958&boardid=18&styleid=1&sid=f1f69f795604e7fd7f3d37c346d25ee5&page=4#67)
*** DC++k CDM V2.75 - 14:10 01/02/2004 ***
Fixed a bug with unchecked users getting a red C for hub count faking.
Fixed a bug with multi hub kicking an unchecked user resulting in all unchecked users being kicked.
Sorry for these 'small' bugs
----thnx psf8500---
download you copy here
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
this is the report for the previous version of 2.75
this one doesnt start checking on his own at startup.
it doesnt mark checked user with a green c
and it still looses the settings for the raw commands.
so you,ll have to enter them more then once.
perhaps an idear of putting a save button on it.
QuoteOriginally posted by [NL]trucker
this is the report for the previous version of 2.75
1 this one doesnt start checking on his own at startup.
2 it doesnt mark checked user with a green c
3 and it still looses the settings for the raw commands.
so you,ll have to enter them more then once.
perhaps an idear of putting a save button on it.
1 does it at my place
2 it does mark mine user with green C
3 happend to me in earlier version from 2.72 all are beiing saved
small tip ;)
save you Raw commands to a txt file
Hello again.
Now all the raw is working and come in the middelfield exept one the raw commands for forbidden fil come i main why. ???
Please help with this 8)
QuoteOriginally posted by Bounty
Hello again.
Now all the raw is working and come in the middelfield exept one the raw commands for forbidden fil come i main why. ???
Please help with this 8)
what raw you use ?
hoi all
Quoteput the raw commands in a txt file
lol i,m a dutch remember Alwaysconnected ?
and as i know there are a lot of stupid folks living there
i,m not one of them :-)) :D
i allready did that with the very first version of dc++kcmd i ever used. :P
i had another prob with 2.75 :rolleyes:
it still is loosing settings even after a clean install [d/l it again and did all the setup again]
it kicked a lot of folks with junk-files but after checking these folks there wasnt any junk files at all. ;(
i have in the settings 3.5 gig as beiing junkfiles
and a 15% accepted
it even kicked folks saying they had over 40 gig as junkfile (:- ?(
so I had alot of explaining to do in my hub lastnight.......
i go back to my old one once again i had no probs with 2.62 at all
i think that till i hear of a client who works a lot better than the ones released lately i will stick to 2.62.
Hello again
you ask for my rawcommands hier it is.
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[cheatingdescription]|<%[mynick]> !kick %[nick] %[cheatingdescription]|
So please help
we will be happy if you can tell how we got the message of forbidden files in the middelfiel :P
QuoteOriginally posted by Bounty
Hello again
you ask for my rawcommands hier it is.
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[cheatingdescription]|<%[mynick]> !kick %[nick] %[cheatingdescription]|
So please help
we will be happy if you can tell how we got the message of forbidden files in the middelfiel :P
ok seen that one.
But i think , not sure the raw command for forbiddenfile use some other rawcommand. I do not know yet wich.
I am not the creator of dc++k cdm. But i go and ask in imperial forum what can be done about it .
QuoteOriginally posted by [NL]trucker
hoi all
Quoteput the raw commands in a txt file
lol i,m a dutch remember Alwaysconnected ?
and as i know there are a lot of stupid folks living there
i,m not one of them :-)) :D
i allready did that with the very first version of dc++kcmd i ever used. :P
i had another prob with 2.75 :rolleyes:
it still is loosing settings even after a clean install [d/l it again and did all the setup again]
it kicked a lot of folks with junk-files but after checking these folks there wasnt any junk files at all. ;(
i have in the settings 3.5 gig as beiing junkfiles
and a 15% accepted
it even kicked folks saying they had over 40 gig as junkfile (:- ?(
so I had alot of explaining to do in my hub lastnight.......
i go back to my old one once again i had no probs with 2.62 at all
i think that till i hear of a client who works a lot better than the ones released lately i will stick to 2.62.
hmz oke but you never know ;)
there is no prob with my version i use now
perhaps an other small tip ;)
download aslso the pdb file of it ans also that other file
i helped me to get it stable ;) you never know
alwaysconnected
i will give it a try perhaps it helps .
Posted: Thu Feb 05, 2004 9:11 pm Post subject:
--------------------------------------------------------------------------------
*** DC++k CDM V2.76 - 20:34 05/02/2004 ***
Fixed some bugs with hub counts on old sytle DC++ tags.
Added option in Settings > Advanced for "Automatically check hub counts". It's on by default but will use less CPU if disabled and possible make it more stable.
Added "Check hub count" to right click userlist so you can manually check IP matches on all connected hubs.
When a user is found in more hubs than tag shows the nicks and hub addresses will now be displayed in report/+info.
Fixed a bug with bad detection of Hacked DC++. Thanks cebek for unknowingly help me find this bug (and sorry that you got auto kicked in the process )
Added %[clientinfo] to raw commands. This is replaced with the same info you get in report/+info. Thanks Todi for the suggestion
----
You can find it here
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.76.rar
:)
Hello AC!
Do you know witch file i have to use to make a working laguagefile to DC++K CDM 2.76.
Spent 3 hours translating the file in the sourcecode called example but it no good ?(
hmz i have no idea
form other dc++ version i know just edit a .xml file
but for this ?(
ask pfs8500 on imperial
he he :D
That?s okay AC, you can?t know everything, but already asked psf8500 there, and han says he don?t know.
And it IS an xml file i have translated, p? it does?nt fit DC++K CDm despite i found the file in the sourcecode for that client. Hmm
I proberly needs to use that xml file, and cnage all in it, to make it fit the client ;(
Hope i can figure it out ?(
Good luck
and if you need a teste I am be there (http://members.lycos.nl/musicmoviesmania/phpbb/images/smiles/120.gif)
to help
*** DC++k CDM V2.761 - 12.30 08/02/2004 ***
The source now contains an Example.xml that should work.
btw there are no changes to this version other than a working Example.xml, so if your not gonna use it for langauge files you wont need it
---
You can get it form here
http://www.imperialnet.org/forum/viewtopic.php?t=387&start=15
v2.761 i s only on the imperial net forum <--- (http://members.lycos.nl/musicmoviesmania/phpbb/images/smiles/050.gif)
Lovin the CDM!
There is 1 problem I found
Phantom DC under DC emulation is not picked up by CDM
Is there any way to fix this?
Good work fella!
QuoteOriginally posted by Robbase
Lovin the CDM!
There is 1 problem I found
Phantom DC under DC emulation is not picked up by CDM
Is there any way to fix this?
Good work fella!
put the infor please on imperial forum
en give an example ther please so psf8500 can amek it better
QuoteOriginally posted by AlwaysConnected
*** DC++k CDM V2.761 - 12.30 08/02/2004 ***
The source now contains an Example.xml that should work.
btw there are no changes to this version other than a working Example.xml, so if your not gonna use it for langauge files you wont need it
I have downloaded it and i have translated it now, and it works just great :D
Thanks for the replies, great having someone to help, when it?s needed.
QuoteOriginally posted by Gnuff
QuoteOriginally posted by AlwaysConnected
*** DC++k CDM V2.761 - 12.30 08/02/2004 ***
The source now contains an Example.xml that should work.
btw there are no changes to this version other than a working Example.xml, so if your not gonna use it for langauge files you wont need it
I have downloaded it and i have translated it now, and it works just great :D
Thanks for the replies, great having someone to help, when it?s needed.
Y V W :)
we must keep on the dC+kkcdm
*** DC++k CDM V2.8 - 16:37 12/02/2004 ***
Sourcecode now contains a working Example.xml for anyone who wants to make a langauge file.
Added a danish langauge file by Gnuff.
Added individual raw commands for ADL search. If this is left blank forbidden files raw command will be sent from fav hubs.
Added ADL search priority. Highest priority file found will be used in %[cheatingdescription] and highest proirity raw command will be sent.
The framework for much more expansion of ADL search is now in place, so expect many more additions soon
Hopefully fixed a few bugs with hub count checking and multi hub kick.
Fixed a few other small bugs.
http://www.ukdnb.dsl.pipex.com/dcplusplusk...+k-CDM-v2.8.rar
more info - http://www.imperialnet.org/forum/index.php?c=7 -
Well, i have impoved the languagefile today, there was some small bugs in it. but it?s not available for download yet, cause one string is missing in the original Example.xml.
As soon as i get that string i guess it will be released with the next update
QuoteOriginally posted by Gnuff
Well, i have impoved the languagefile today, there was some small bugs in it. but it?s not available for download yet, cause one string is missing in the original Example.xml.
As soon as i get that string i guess it will be released with the next update
nice ;)
arether some ppl here to help me build a Dutch language file ?
It has come to my mind that the missing string has to be made in the sourcecode, so when it?s there, i can translate the last.
I know a lot more can be added to the sourcecode, which makes it possible to translate ALL the client, i will try learn more about the sourcecode, so i can add those strings, if not someone gets there before me :D
hey AC
if you need any help you know where to contact me leave me a pm in the hub and i will respond asap.
QuoteOriginally posted by [NL]trucker
hey AC
if you need any help you know where to contact me leave me a pm in the hub and i will respond asap.
this is wat we need to trans late
http://home.planet.nl/~feer0011/Example.xml
for DC++ cdm
The string is now in place, so the language file is complete, in the new release :D
Fixed a bug with /addforbidden. Anything added with /addforbidden overrides ADL Search priority.
Added a swedish language file by Moa.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.81.rar
Info
http://www.imperialnet.org/forum/viewtopic.php?t=214
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
oke folks the dutch translation file
translated by Always connected and myself
========================================
-
-
Active
Aktief / Zoek String
Toevoegen
Voeg toe aan Favorieten
Adres alin gebruik
Adres niet Beschikbaar
Automatische Directory Lijst zoeken
Alle download slots bezet
Alle %d gebruikers afwezig
Alle 3 de gebruikers afwezig
Alle 4 de gebruikers afwezig
File list word al gedownload
iedere
OP z,n minst
Op z,n meest
Audio
Automatisch verbinden / Name
Gemiddeld/s:
Afwezig
Afwezig status uit
Away status aan:
B
Beide gebruikers afwezig
Browse...
Kan niet downloaden van Passive gebruikers als je zelf Passive staat
Alleen Praten
Enkele uitzonderingen tijdens het onderzoeken van de file lijst
Geen vrije sloten ondanks DC++
Filelist was niet te downloaden
Kies folder
Sluit verbinding
bezig met het sluiten van de verbinding...
Sluit
inpakken
Fout tijdens inpakken
Verbind
Verbonden
Bezig met verbinden...
Verbinden (geforceerd)...
Verbinden met
Verbinding
Verbinding gesloten
Verbinding geweigerd door computer
Verbinding gereset door de server
Verbindings timeout
Kopieer Nick naar het clipboard
Kan de doel file niet openen:
Kan de file niet openen
Tel
CRC gecontroleerd
Fout tijdens uitpakken
Beschrijving
Doel
Directory
Directory is al gedeeld
Verbinding gesloten
Disk vol(?)
Document
Klaar
Download
Download mislukt:
Download klaar, idle...
Begin van de Download...
Download naar...
Download wachtrij
Download de hele directory
Download de hele directory naar...
Gedownload %s (%.01f%%), %s/s, %s Over
Gedownload van
Downloading...
Download van publieke hub lijst...
Dubbele source
Edit
E-Mail
Geef een nick naam op in de setting tab!
Geef een passwoord alstublieft
alstublieft geeft U een reden
Voer een zoek opdracht in
Geef een bestemming aan
Fout tijdens het openen van de file
Fouten
Precieze Grote
Uitvoerbaar bestand
Favoriete Hubs
Favoriete hub toegevoegd
Favoriete Gebruiker
Favoriete Gebruiker toegevoegd
Bestand
Bestanden
bestanden lijst vernieuwd
bestand niet aanwezig
Bestand soort
Een bestand met een andere grote bestaat al in de wachtrij
Bestandsnaam
Filter
Zoek
Bestand gedownload
Bestand ge-Upload
Forceer verbinding
GB
Pak file lijst
Ga naar directory
Geef een extra slot
Hoog
Hoogste
Het gemiddeld aantal keren:
Aantal keren:
Host onbereikbaar
Hub
Hubs
Hub-Adres
Hub lijst gedownload...
hub lijst uitpakken mislukt
Klaar met uitpakken van de Hub lijst
Beginnen met het uitpakken van de hub lijst
Naam
Hub passwoord
Gebruikers
tegen gehouden bericht:
ongebruikelijk aantal slots
foute doel file (kwijt geraakte directory, (Controleer de bestaande download directory optie)
Ip:
Dingen
Komt binnen:
Komt binnen/Verlaat berichten uit
Komt binnen/Verlaat berichten aan
kB
Verwijder Gebruiker(s)
Een file van gelijke grote of groter dan is al aanwezig op de bron bestemming
Hub (Op het laatst gezien indien afwezig)
bezig met DC++ starten, even geduld A.U.B....
Laag
Laagste
handmatig verbindings adres
Vergelijk wachtrij
%d file(s) komen overeen
MB
&File
ADL Zoeken
&Download wachtrij\tCtrl+D
&Exit
&Favoriete Hubs\tCtrl+F
Favoriete &Gebruikers\tCtrl+U
Volg de laatste doorverwijzing\tCtrl+T
Importeer wachtrij van NMDC...
&Kladblok\tCtrl+N
Open file lijst...
&Publieke Hubs\tCtrl+P
&Opnieuw verbinden\tCtrl+R
&Zoeken\tCtrl+S
Zoek spion
Opties...
&Help
Over DC++...
Verander Log
DC++ discussie forum
Stort ???/$$$ (paypal)
Downloads en Vertalingen
Veel gestelde vragen
Help forum
DC++ Homepage
Leesmij / Help voor nieuwelingen
Vraag om een nieuwe toevoeging die er nog niet is
Rapporteer een foutmelding
&Bekijk
&Status bar
&Toolbar
&Window
Sorteer de inconen
Cascade
Sluit de gesloten connectie
Verklein &Alle
Tile
Verplaats/Hernoem
Verplaats naar beneden
Verplaats naar boven
Netwerk onbereikbaar (bent u wel met het internetverbonden?)
Volgende
Nieuw...
Naam
U naam bestaat al, wijzig deze a.u.b. in iets anders!
(Naam onbekend)
Non-blocking operatie is nog steeds bezig
Niet verbonden
Is niet een socket
Nee
Is geen map gespecificeerd
U probeert van u zelf te downloaden!
Geen fouten
Geen overeenkomsten
Geen slots aanwezig
Geen gebruikers
=====================================
Deel 2
=======================================
Er zijn geen gebruikers om van te downloaden
Normaal
Notepad
Offline
Online
Alleen gebruikers met open slots
Open
Open map
De operatie zou de block belemmeren
De harde schijf is bijna vol
Passieve gebruiker
Paswoord
Delen:
Pad
Pause
Geen toestemming gegeven
Plaatje
Poort:
Poort %d is bezet, kies a.u.b. een andere poort in het settings venster, of sluit het andere programma dat het momenteel gebruikt en herstart DC++
Bereid de bestandslijst voor...
Druk op de volg doorstuur button om te connecten met
Prioriteit
Privee bericht van
Instellingen
Hubs voor iedereen
Lees source
U wilt echt sluiten?
Stuurt door
Omleiding ontvangen voor een al geopende hub
Gebruiker(s) omleiden
Verfris
Verfris de gebruikers lijst
Verwijder
Verwijder alles
Verwijder alle sub-mappen voor dat u deze toevoegd
Verwijder de gebruiker uit de wachtrij
Bestand verwijderen
Dit bestand is niet dezelfde als die op de harde schijf
Bezig...
Zoeken
Zoeken naar
Zoeken naar andere gebruikers met dit bestand
Zoeken naar een bestand
Zoekopties
Misbruik van de zoekfunctie door
Spion
Zoekopdracht
Bezig met zoeken naar
Priveebericht sturen
Server
Prioriteit
Geavanceerd
Sta toe dat er gezocht word op risico single-file en zoek naar andere aanbieders
Geef altijd alle get target (Download naar...) matches
Gebruik antifragmentatie methode voor downloads
Controleer de bestandslijst automatisch bij nieuwe gebruikers
Bekijk de queue automatisch wanneer deze is gedownload en controleer de met ze bestandslijst
Auto-afwezig bij minimaliseren (en terug bij maximaliseren)
Volg omleiding automatisch
Verbreek connectie als gebruiker de hub verlaat (wordt niet verbroken als de hub uit gaat / als je zelf de hub verlaat)
zoek automatisch naar alternatieve download locaties
Verfris gedeelde bestanden elk uur
Wis de zoekbox automatisch na elke zoekopdracht
Commando
Geeft het oude hub aantal weer
Download versie xml bestand
Zet de zoek aanvarings beveiliging aan
Negeer berichten van gebuikers die niet online zijn (effectief tegen bots)
Alle Junk bestanden worden gelijk gesteld aan fakedelen
Verwijder de bestandslijsten van gebruikers niet bij afsluiten
Log de controle op fakedelen (het log-bestand KAN groot worden!!!)
Log gevonden fakedelers
Naam
Stuur geen auto-afwezig berichten naar bots
Open favoriete hubs venster bij start
Open afgeronde downloads venster bij start
Popup berichten van gebruikers die niet online zijn (bij het niet negeren komen de berichten in de main chat)
Popup prive berichten
Geef de resultaten van de gecontroleerde bestandslijsten weer
Controleer de client opnieuw
Connect opnieuw wanneer gemeld wordt dat de naam reeds bestaand
Verwijder dubbele bestanden uit mijn share (anders blijven de bestanden voor anderen zichtbaar, ze tellen niet mee voor de totale share grootte)
Activeer automatische SFV controle
Geef de progress bars voor overdracht weer voor bestands overdracht (gebruikt enige CPU kracht)
Sla automatisch zoeken over wanneer het downloaden is gestart
Sla automatisch zoeken over wanneer er gepauseerd is
Sla automatisch zoeken over wanneer deze download (niet veilig)
Sla lege bestanden (0 bytes) over
Gebruik kleine verzend-buffer (gebruik als uploads de downloads erg vertragen!)
Geef de cheat berichten weer in de mainchat
Installeer URL handler bij start (om dchub:// links te kunnen gebruiken)
Weergave
Maak afgeronde downloads tabblad VET als download is afgerond
Volledige rij selecteren in lijsten
Filter kick en NMDC debug berichten
Minimaliseer naar taakbalk
Laat standaard tijd zien in chat
Bevestig afsluiten programma
Laat status berichten zien in hoofd chat
Laat nieuwe en vertrekkende gebr. zien in chat
gebruik system iconen bij het zoeken (vertraagt het zoeken)
DC++k
DC++k Detector
Downloads
Algemeen
Logs en geluid
Delen
CRC32 fout (SFV-controle)
Gedeeld
Geldeelde bestanden
Grootte
Max grootte
Min grootte
Slot toegewezen
Slots
Slots ingesteld
Socket uitgeschakeld
Foute socks server authenticatie (onjuiste gebruikersnaam / wachtwoord?)
De socks server ondersteunt de gebruiker niet / wachtwoord authenticatie
De socks server kon geen connectie tot stand brengen
De socks server vraag om herkenning
========================================
deel 3
========================================
Niet gelukt om de socks server voor UDP relay op te zetten (controleer socks adres en poort)
Bron Type
Server:
Zoekopdracht
Snelheid
Status
Doelbestandsnaam te lang
TB
Tijd
Tijdsaanduiding staat uit
Tijdsaanduiding staat aan
Totaal:
Type
Fout bij maken thread
Onbekend
Onbekend adres
Onbekende fout: 0x%x
Niet ondersteunde bestandslijst-indeling
Upload is gereed, idle...
Upload gestart...
%s (%.01f%%) ge-upload, snelheid %s/s, %s te gaan
ge-uploaded naar
Gebruiker
Gebruiker omschrijving
Gebruiker is offline
Gebruiker is niet meer online
Gebruikers
Video
Wachten...
Wachten (Gebruiker is online)
Wachten (%d van de %d gebruikers online)
Wachten op nieuwe poging...
Wat is dit?
Land
Min delen
Min slots
Max slots
Max gebruikers
Betrouwbaarheid
Waarde
Ja
U wordt omgeleid naar
Lock
Pk
Client
Laat geen PMs toe
IP
Tag
Host
Kopie
Rapporteer
Krijg responce van de gebruiker
Controleer Gebruiker
Rapporteer als er gecheat wordt
Debug mode
Debug gebruiker commandos
Onderdruk de main chat
Reverse connect
Quickdc
.PhantomDC
DC@fe++
zDC++
iDC
Backyard DC++
CZDC++
DC++k CDM
Ondersteuning
Bytes
Verboden
PTDC++
MS++V
DC++k CDM homepage
DC++k CDM homepage (mirror)
DC++k CDM forum
LuDC++
XDC++ CDM
SdDC++
Multi hub kick
Show CDM tag (verschijnt altijd wanneer je geen OP bent)
Controleer automatisch de aantal hubs
Controleer het aantal hubs
Raw commando
Prioriteit
========================================
voeg deze drie samen en je hebt de nl-vertaling.
if you put both toghter
you get this
http://home.planet.nl/~feer0011/NLDCppkCDM.xml
you can import it in your DC++kcdm client
File->settings->appereance->language file _pish on browse look for it and import
:)
Bugs misspelled infor me
Added user defined fake share detection. Check out Settings > DC++k Detector. "Too even share size" raw is sent for this.
Added detection of DC++PossumMod.
Added detection of tagged DCTC.
Added filelist size to user list and +info/report.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
AlwaysConnected
thanks m8 for keeping us up to date
The latest version is:
*** DC++k CDM V2.83 - 21:35 18/02/2004 ***
Fixed bugs with share size reporting caused by ADL search. Thanks everyone that reported this.
Fixed a bug with copy > email trying to do a multi hub kick. Thanks Dashes for reporting this.
Added more fake tag detection. Thanks partly to Dashes
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
damn your fast :D :D :D :D
Thnx for notice us :))
and the next one
The latest version is:
*** DC++k CDM V2.84 - 22:46 19/02/2004 ***
Fixed Multi hub kick.
Added an option to auto kick Ruri's hub flooders. more infos about here (http://board.univ-angers.fr/thread.php?threadid=1369&boardid=11&sid=e0742e14551c72691b1210ea23cd9b51&page=5#98)
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
zakagreetings
*** DC++k CDM V2.85 - 19:20 24/02/2004 ***
Hopefully fixed a few runtime errors... maybe caused a few unhandled exceptions :p
Fixed sorting of filelist size and bytes shared.
Filelist size is now updated in userlist as soon as it's known.
Added column in user list for speed of last download.
*** DC++k CDM V2.86 - 20:26 24/02/2004 ***
Fixed an unhandled exception caused by *cough* sloppy coding *cough*
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
:)
yeahhh
thx 4 the info
yesss, it`s true.. i`m a cmd junkie lol :tongue: :rolleyes: :P
sh... are we already on CDM V2.86 , fast coders..
I cant keep up the tempo...lol
AC ur the gratest for all CDM info u provided here..!!
Itried dc++k v 75 now i have v 2.86 same problems in both.
Hub runnink ptokax td or 15.25 beta everytime when dc++k sends a raw command including !drop or !ban
it gets disconected!!!
Whatta hell?
.....
So i can only use this:
$To: OpChat From: %[mynick] $<%[mynick]> <%[nick]>Ops CHeck this user cuz i have detected this ----> %[clienttype] - %[cheatingdescription]|
....
Works! but in adl search as i set it for .tmp etc even this raw gets it disconnected !!
PLS HELP!!!
QuoteOriginally posted by Hades
Itried dc++k v 75 now i have v 2.86 same problems in both.
Hub runnink ptokax td or 15.25 beta everytime when dc++k sends a raw command including !drop or !ban
it gets disconected!!!
Whatta hell?
.....
So i can only use this:
$To: OpChat From: %[mynick] $<%[mynick]> <%[nick]>Ops CHeck this user cuz i have detected this ----> %[clienttype] - %[cheatingdescription]|
....
Works! but in adl search as i set it for .tmp etc even this raw gets it disconnected !!
PLS HELP!!!
hmz try over here
http://www.imperialnet.org/forum/index.php?c=7&sid=d1802ed612c379ed29addc6fa227bb05
thats the dc++k cdm forum
i think there are specialists in raw commands :)
latest version:
*** DC++k CDM V2.9 - 00:20 04/03/2004 ***
Added detection of DC++ Stealth users who use fake file lists. No auto kick for it yet as there may be bugs. Thanks cologic.
_________________
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
http://www.imperialnet.org/dcppkcdm/
QuoteOriginally posted by Hades
Itried dc++k v 75 now i have v 2.86 same problems in both.
Hub runnink ptokax td or 15.25 beta everytime when dc++k sends a raw command including !drop or !ban
it gets disconected!!!
Whatta hell?
.....
So i can only use this:
$To: OpChat From: %[mynick] $<%[mynick]> <%[nick]>Ops CHeck this user cuz i have detected this ----> %[clienttype] - %[cheatingdescription]|
....
Works! but in adl search as i set it for .tmp etc even this raw gets it disconnected !!
PLS HELP!!!
and here http://www.imperialnet.org/forum/viewtopic.php?t=548
However this does'n solve problem!!
Neither does forum u directed me to!
I see couple of ppl having same problem in ptokax with raw kick or drop commands!
look here for example:
http://www.imperialnet.org/forum/viewtopic.php?t=549
Thing is noone can solve this so far in my particular case it's even worse bcause my ptoka doesn't seem to hawe !kick command at all it has !drop wchich sycks cuz it kicks with temp but there is no space to put reason of kick!!!
.
Now i have installed Geccko last night i beliwe this wont work either since geccko requires all ops to provide password before kick command is enabled Jesus whatta life:))
.......
Hia :))
Hades try a script that has the kick command like Mean Machine.
I want to ask u cmd junkies :)) i know its not the realy right place to post but anyway.
I wanna use a RAW command to sen the rules to users, that part works, but it dont looks nice, all the word is inone sentense, i wanna add linebreaks (dont know if that is the right word in english).
Command is like this now:
$To: %[nick] From: %[mynick] $<%[mynick]> 1. Have slots open when you join,Minimum 2 Slots per hub (if you are in 3 hubs that is the same as 6 slots). 2. No racist material ! 3. You must maintain at least 2 open slots for users of this hub. 4. Share at least 2GB. 5. Music ONLY, NOTHING else allowed ! (so no ".exe", ".dll", ".shn", and word in filenames like "nigger" ,"fuck" ). 6. An OP can demand a slot from you, In purpose of finding fake share or wrong files, not for downloading from you. 7. An OP can demand you to rename/remove specific files, What an Op says goes! No point in arguing ! 8. No flooding or bad language in the main-chat or in PM's. 9. By entering this hub you take full responsebility for your own actions, and can in no way blame the hub or it's members. 10. You may not close down another user downloading from you. 11. If you have wrong files in here you might be ban for a certain time if you don't respond to an Op. 12. No advertising on other hub's, ftp's, etc. in Main OR in PM's or in Tag description.|
And i think u can guess that i want it to look like
1. Have slots open when you join,Minimum
2 Slots per hub (if you are in
3 hubs that is the same as 6 slots). 2. No racist material !
and so on.
Z ya and keep up this good tread :))
MrZ, did you try "\n" ??
Im not so very well on those but give it a try :)
QuoteOriginally posted by Hades
However this does'n solve problem!!
Neither does forum u directed me to!
I see couple of ppl having same problem in ptokax with raw kick or drop commands!
look here for example:
http://www.imperialnet.org/forum/viewtopic.php?t=549
Thing is noone can solve this so far in my particular case it's even worse bcause my ptoka doesn't seem to hawe !kick command at all it has !drop wchich sycks cuz it kicks with temp but there is no space to put reason of kick!!!
.
Now i have installed Geccko last night i beliwe this wont work either since geccko requires all ops to provide password before kick command is enabled Jesus whatta life:))
.......
STOP! DON`T CRY
i like the step by step methode
--------------------------------------------------------------------
ur first question had been:
I have hard time configuring it!!
Everytime dc__k cdm sends a raw commans with !drop or !ban it gets disconected!
Why?
I can olny use this:
$To: OpChat From: %[mynick] $<%[mynick]> <%[nick]>Ops CHeck this user cuz i have detected this ----> %[clienttype] - %[cheatingdescription]|
.....
Can someone tell me what causes this?
....
Running hub on ptokax beta ver 15.25...
THANX!
---------------------------------------------------------------------
my answer:
copy & paste
$To: OpChat From: %[mynick] $<%[mynick]> <%[nick]> Ops CHeck this user cuz i have detected this ----> %[clienttype] - %[cheatingdescription]|
should work..
cyaa
----------------------------------------------------------------------
my 2. answer
works..
messages sended to the op chat:
[11:37] <-=SPACE*NETWORK*TERMINATOR=-> <[adsl]Toxxx> Ops infotest i have detected this ----> oDC -
[11:37] <-=SPACE*NETWORK*TERMINATOR=->
Ops infotest i have detected this ----> oDC -
[11:38] <-=SPACE*NETWORK*TERMINATOR=-> Ops infotest i have detected this ----> oDC -
[11:38] <-=SPACE*NETWORK*TERMINATOR=-> Ops infotest i have detected this ----> DC++ -
[11:38] <-=SPACE*NETWORK*TERMINATOR=-> <[BBB]exxx> Ops infotest i have detected this ----> DC++ -
[11:38] <-=SPACE*NETWORK*TERMINATOR=-> Ops infotest i have detected this ----> DC++ -
----------------------------------------------------------------------
i wanna ask u... works now?
(check the spaces----> <%[nick]> Ops is not <%[nick]>Ops)
ur 2. question about the "problem"
ptokax !kick works fine
to set up the cmd client u need elementar knowledge
pls read:
plops messages in the DC++k CDM Users forum
and http://members.lycos.nl/alwaysconnected/
and http://www.ukdnb.dsl.pipex.com/dcppkcdm-guide/index.html
don`t worry, be happy
nothing r perfect ;)
ps: pls poste ur questions only in the cmd forum.. i`m a old men.. i get confused with the multitasking ;)
cyaaa
Hia :))
Nope the \n command didn't do any "linebreaks" kepp, tnx for trying anyway,,,,
Edited:::
Stupid me was RAW command blind and tried the hard way :))
The easy way was offcource to change the XML file (blushing).
If i later look at the RAW command it did out of it its looking realy strange, but it works and that ok with me.
Tnx anyway
Z ya
*** DC++k CDM V2.91 - 23:17 08/03/2004 ***
Fixed a bug with DC++ 0.3065 CVS version being detected as DC++k.
Hopefully fixed a bug with TestSURs not being removed from queue for offline users.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.91.rar
damn cookies :P
hi AC:
The page you are trying to get to was not found at this address:
http://dialspace.dial.pipex.com/town/pipex...+k-CDM-v2.9.rar
but u can find it here to.:
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
@ the moment..
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/DC++k-CDM-v2.91.rar
or
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.91.rar
cyaa
new version out:
*** DCDM++ 0.008 22:39 08/03/2004 ***
Now using PCRE/PME regular expressions. Big thanks to AtomicJo for the help with this.
Client profiles now remember there order between sessions.
Added TestSUR you can now use this in client profiles along with supports (supports are bit buggy).
Added %[version] in tags. e.g. ^<(
- ){2} V:%[version],M:([AP5]){1},H:([0-9]){1,3}/([0-9]){1,3}/([0-9]){1,3}(,S:([0-9]){1,3}|,S:([0-9]){1,3},O:([0-9]){1,3})>$
This version number will be displayed in user list.
Beware background scanning is very unstable. May work ok in very small hubs.
http://www.ukdnb.dsl.pipex.com/dcplusplus/DCDM0.008.rar
http://www.ukdnb.dsl.pipex.com/dcplusplus/DCDM0.008-pdb.rar
http://www.ukdnb.dsl.pipex.com/dcplusplus/DCDM++v0.008-src.rar
--------------------------------------------------------------------
*** DCDM++ 0.009 00:43 09/03/2004 ***
Fixed bugs with settings.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DCDM0.009.rar
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DCDM0.009-pdb.rar
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DCDM++v0.009-src.rar
----------
Not sure if all links work
Hi Downloaded it, but not sure what it does??
Woody
Woodster
read the dc++kcmd user guide it is in the link under the name of AllwaysConnected.
Im talking about this new DCDM++
I have figured it out...
am i right in thinking that you create a databes of clients in which when you check a user in a hub, it matches it with a client in the datbase
If someone who knows please correct me!
Woody
QuoteOriginally posted by Woodster
Im talking about this new DCDM++
I have figured it out...
am i right in thinking that you create a databes of clients in which when you check a user in a hub, it matches it with a client in the datbase
If someone who knows please correct me!
Woody
not tested by me so i donnot know
but it could be nice :)
OK then....
Do you know of a forum??
Woody
Ac
i think it is a shitty client
it even gets stopped by robocop as being a hacked dc++
you only can set the diffrent clients about 8 or 9
there are no raw commmand settings
most of the stuff isnt working or cannot be set.
so back to the designer tablle with this one.
What Raw Command would yo put into the box if you wanted to kick some1 ???
Woody
QuoteOriginally posted by Woodster
OK then....
Do you know of a forum??
Woody
DC++k and DCM++ forum
http://www.imperialnet.org/forum/
and remember DCM++ is beta !
Hi to the Forum.
I came to this threat searching about LUA scripting and found some interesting things.
After reading the (by now) 11 pages have to say it?s an interesting one. But also think there?s some I have to explain.
There are currently 2 mods of the CDM.
The old one (CDMk version 2.91 at the moment) and the new (DCDM++ 0.009).
The DCDM++ it?s an early beta, while the development and upgrade of the pretty mature CDMk continue.
So, why start with a new "type" of client?.
The old one cames as psf8500 has based his own at the original Sarf?s source code (k versions)
and has some limitations detecting because this.
The new one source code is based at the BCDC++ 0.306. It has some interesting features by it?s own,
but also has some that maybe some people could consider interesting at this forum:
Client-side scripting in Lua.!!!
So the detection schemes could be improved ;)
Obviously, for those who have the knowledge to do this, which is obviously not my case.
After all, that?s why I was searching for LUA related stuff round here. :D
Cheers for all.
The latest version is:
*** DC++k CDM V2.92 - 18:28 13/03/2004 ***
Added more detection of DC++k 0.251. Thanks AluM.
Added detection DC:PRO using DC++ emulation. Thanks Dashes.
Added raw command sending for DC++ stealth - Fake filelist detection from 2.9
Fixed bugs with fake filelist detection (DCGUI & 0 bytes shared are ignored)
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
The latest version is:
*** DC++k CDM V2.93 - 22:13 17/03/2004 ***
Added detection of ZFDC++ and Strong DC++. Thanks Dashes.
Added detection of DCDM++. How could i have forgotten this!!!
Fixed so that ALL clients with an empty raw command no longer a red 'C'.
More detection of Reverse Connect. Thanks Sulan.
Fixed some untagged clients getting detected as Stealth DC++.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
*** DC++k CDM V2.94 - 22:26 31/03/2004 ***
Added detection of rmDC++ and latest nDC++.
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/DC++k-CDM-v2.94.rar
have phun
thnx to pfs8500
http://www.imperialnet.org/forum/viewtopic.php?t=214&start=15
*** DC++k CDM V2.95 - 00:21 07/04/2004 ***
Added cheat status column.
Added UserIP column and an option to send $UserIP to all users in fav hub properties.
Added %[userip] as a param for raw commands.
Changed force attempt in transfer view so that it's at the bottom with a seperator above it. Thanks Ldc for the suggestion.
Added detection of BlackDC. Thanks sulan.
Added more hub flooder detection. Thanks plop.
------------------------------------------------------------------
*** DC++k CDM V2.96 - 16:17 12/04/2004 ***
Fixed a crash when sorting UserIP and Cheat status columns.
Fixed UserIPs disappearing from userlist.
---------------------------------------------------------------------
*** DC++k CDM V2.97 - 10:40 13/04/2004 ***
Fixed BlackDC detection
download it form here
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/
The latest version is:
*** DC++k CDM V2.96 - 16:17 12/04/2004 ***
Fixed a crash when sorting UserIP and Cheat status columns.
Fixed UserIPs disappearing from userlist.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
The latest version is:
*** DC++k CDM V2.97 - 10:40 13/04/2004 ***
Fixed BlackDC detection.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/
;) :baby:
i think you sleep too long ;) :D :D
all version you posted i posted already :) 8o
but its nice to see most ppl as hubowners like
DC++k cdm ;) :rolleyes: :rolleyes:
Greets AC ;) :D
QuoteOriginally posted by AlwaysConnected
;) :baby:
i think you sleep too long ;) :D :D
all version you posted i posted already :) 8o
but its nice to see most ppl as hubowners like
DC++k cdm ;) :rolleyes: :rolleyes:
Greets AC ;) :D
uups... yep.. bit fog in my brain.. i`m sorry.. lol
any of you ppl know where http://imperialnet.org/forum/
go to ?
it was made for dc++k cdm
QuoteOriginally posted by AlwaysConnected
any of you ppl know where http://imperialnet.org/forum/
go to ?
it was made for dc++k cdm
pfew its back :)
The latest version is:
*** DC++k CDM V3.0 - 21:49 18/05/2004 ***
Added small file checking for DC++ clients. Should detect some slotlockers and fake filelists. Not tested too much, maybe buggy so don't autokick!!
Fixed so that DC++ 0.402CVS (and any mods based on it) are not automatically detected as BCDC++ (again not tested much).
Sorry theres not been an update for a while, busy with uni stuff. Exams over soon. Woohoo!!
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/ (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/)
thnx for the update Yokozuna
it has been a while now since the previious version.
The latest version is:
*** DC++k CDM V3.1 - 19:59 10/06/2004 ***
* DC++ 0.304 and older now use 16KB small file check.
* Fixed so that DC++ 0.402 CVS and clients based on it are not kicked due to no slots for filelist.
* Fixed so that UserIP is set to false by default when using /fav.
* This will probably be the last version of DC++k CDM. I'll be concentrating on DCDM++ now.
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v3.1.rar
thnx AC
for the update but still i hope he wil continue to work on it .
i think
the DCDM++ will be the new DC++kcdm
i seen some builds and tryed it looks real good :)
DCDM++ <
please
QuoteOriginally posted by oblivion
DCDM++ <
please
most things work the same as on DC++kcdm
the the you need its the profile.xml
http://www.imperialnet.org/forum/viewtopic.php?t=727&start=60
http://www.fin-overclocking.net/profiles_v22.rar
and config the Raw's
and let check it all ;)
Really fixed (I hope) so that DC++ 0.402 CVS and clients based on it are not kicked due to no slots for filelist.
Maybe fixed runtime error crashes.
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/DC++k-CDM-v3.2.rar
Hia
About that DCDM client.. is there lua files to the latest version, and if so what does it do??
Z ya
QuoteOriginally posted by MrZ
About that DCDM client.. is there lua files to the latest version, and if so what does it do??
Open ur Startup.lua and find this :
--dofile( "bier.lua" )
take away the " -- " and go startup the client ...
then type in the chat : ' I like bier '
You can find more if u watch this (http://board.univ-angers.fr/board.php?boardid=24)
hello , I have a problem with DC++k CDM (3.1) and Robocop v8.0a :
when i want to kick a user with right click a reseve this message from the hub :
" *** You are not allowed to use this command!"
but I have the power to use this command ?(
I'm try with another client and not have this bug :rolleyes:
in the console hub I have this message :
"Syntax error: attempt to perform arithmetic on local 'howmuch' (a string value)" ?(
QuoteAbout that DCDM client.. is there lua files to the latest version
Sorry i forgot to include the scripts with 0.026. I've fixed it so there included in the release now, but you can get just the scripts here (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DCDM0.026Scripts.rar).
Just put them in the same folder as your .exe :)
Is it possible to have the English.xml so that we carry on with translations on DCDM++ ? :D
QuoteOriginally posted by Herodes
Is it possible to have the English.xml so that we carry on with translations on DCDM++ ? :D
download the source of DCdm++
i think there is some english.xml file in it
not sure but i think it is
:))))
Tnx a lot guys
Herodes, yes ive missed that tread ..strange ;) tnx
psf8500, tnx man.. thought it was me that was simply stupid ;)
Z ya
Made small file checking an option.
Added MiniSlots support. Thanks Dashes for the code and the gentle hints that i should add it
Not tested this version at all (god i'm bored of coding this client).
This will probably be the last version of DC++k CDM. I'll be concentrating on DCDM++ now (Deja Vu?).
--------------downloads------------------------
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/DC++k-CDM-v3.3.rar
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/DC++k-CDM-v3.3-pdb.rar
http://dialspace.dial.pipex.com/town/pipexdsl/s/asmr89/dcpluspluskcdm/DC++k-CDM-v3.3-src.rar
--------------downloads------------------------
I think this will be the last en final update of this version
2 lua members helped me to make a good Guide for this
version
those are petsagouris
many many thnx
please take a look on
//www.dcppkcmd-guide.tk
thnx ppl who helped :)
Wow. This was a trip down memory lane :)
Glad so many people found some use out of my C++ hacking while I was at uni :)
Shame the imperialnet.org forum is no longer around. Would love to read some of that stuff.
Anyway, if anyone does happen to read this, I'm now working for a major corporation and doing very well for myself :)
I have happy memories of coding away at my DC++ mods :)