What has happen to Glory Securitaz???

[Skrollster]

I will tell you..

i'v been working on a new publicrelease(1.9) for a while now, but i realised that i will newer make it public.

i'm rewriteing GS from scratch, there will be a new version called 2.0, unfortunatly not compatible with GS 1.X ini file, i will reuse some of my old code but i will also change a lot of the code.. as for now, i haven't reused any code, but i still only have begaun with the frame...

what will come in 2.0??
this is what i have in my Commands to implement file:

Commands to come in Glory Securitaz 2.0
levelsixcommands:(NotReg)
	go
	hubinfo
	myip
	mystat
	network
	news
	reg
	rules
	showstat

levelfivecommands:
	mypassword
	chpassword

levelfourcommands:
	showreg

levelthreecommands:
	disconnect
	kick
	kickban
	mm - ?ven pm
	mmop - ?ven opm
	ophelp
	redirect
	redirectto
	Show kicklist
	show opnews
	timeban
	warn
	whois

leveltwocommands:
	add networkaddress (IP/dns, string) - (AdvertiserCheck - table)
	add illigalprefix (prefix, string) - (illigalprefix - table)
	show networkaddress (IP/dns, string) - (AdvertiserCheck - table)
	show illigalprefix (prefix, string) - (illigalprefix - table)

	add kicklistentry
	add news
	add opmessage
	add user

	change chatstat
	change userprofile
	change username
	replace news
	replace opmessage
	
	advert
	advertpm
	redirectallnow
	resetchatstat
	resetcounters
	seenop
	suhelp

levelonecommands:
	set desciption (name string)
	set hubname (name string)
	set maxhubs (number int)
	set maxslot (number int)
	set maxusers (number, int)
	set minslot (number int)
	set redallusers (on/off string)
	set redfull (on/off string)
	set redirect (what string) (IP/dns string)
	set regserver (IP(s)/dns(es) string)
	set sharelimit (number(gb), int)
	set slotratio (number int)

	set showkickreason (pm/main/off) - pm-only for ops, main-for everyone
	set showbanreason (pm/main/off) - pm-only for ops, main-for everyone
	set showredirect (pm/main/off) - pm-only for ops, main-for everyone
	set sendopnewsonlogin (pm/main/off) - will be ops only :)
	set sendnewsonlogin (pm/main/off) - will be sent to everyone

	set advertisemessage (message string) - (AdvertMessage)
	set adverttimerinterval (number min) - (TimerInterval)
	set allowselfregister (on/off) - (Selfregister)
	set antiadvertisercheck (on/off) - (AdvertiserCheck)
	set errormessage (on/off) - (ErrorMessage)
	set hubtag (tag, string) - (hubtag)
	set maxusersforwhois (number, int) - (maxusersonlineforwhois)
	set nondc++redirectadress (IP/dns string) - (nmdcredirect)
	set onlydc++ (on/off) - (Nmdc_Check_on)
	set redirectnondc++ (on/off) - (redirectnmdc and Nmdc_Check_on)
	set seenopenabled (on/off) - (SeenOpEnabled)

	remove networkaddress (IP/dns, string) - (AdvertiserCheck - table)
	remove illigalprefix (prefix, string) - (illigalprefix - table)

	remove user
	remove news
	remove opmessage

	show passwords
	show password

Inbuilt commands:
	addreguser -- will be blocked
	ban -- for levelfour and lower
	banip -- for levelfour and lower
	clrpermban -- for levelone only
	clrtempban -- for levelfour and lower
	delreguser -- will be blocked
	drop -- for levelfour and lower
	gag -- for levelfour and lower
	getbanlist -- for levelfive and lower
	getinfo -- for levelfive and lower
	help -- will be blocked but, replaced by own function
	ipinfo -- will be blocked
	iprangeinfo -- will be blocked
	me -- for everyone
	nickban -- for levelfour and lower
	op -- will be blocked
	restart -- for levelone only
	restartscripts -- for leveltwo and lower
	unban -- for levelfour and lower
	ungag -- for levelfour and lower
	userinfo -- will be blocked
	stats -- for levelfour and lower

if you are missing something, please tell me right now..

and this is another to do list:
-- Going to:
-- Implement a new ini file with better structure
-- Implement a new regusers file containing info about who added the user and then and a comment
-- the new reguserfile will also contain lasttime the user logged in or out, last ip, last share
-- News and OPNews will be stored in tables
-- Network adresses will be stored in 2 tables one for antiadvertiseing and one for +network and +go command
-- The help for each and every command will be stored in the same table as the function itself
-- Implement a datalog sortof script, either in glory or as a standalone
-- Implement a counter for each and every usercommand, all stored in a single table
-- Only have 5 userlevels(or maybe 6) Master, SU, OP, Vip, Reg, NonReg
-- Implement possibility of any number of different prefixes with any length, like GS: or ! or ? or + or ?
-- Implement possibility to use commands sent to bot with or with out prefix

[[ES]latinmusic]

Skrollster a few questions, i have never use glory before, althougth is one of the best scripts because you use the profiles [SU], etc, as far as i remember, this way is total incompatible with our way, in my net i mean, so the the question will be:
Are you going to use in the new one your old profiles or simply are you going to use the built in profiles from ptokax?.
In case your use your own profiles, will you release an extra version to work only ptokax profiles? or better
Will you add an configurable option perhaps to make all the script works with or without your profiles part?.
I'm afraid the answer for all will be no ;( anyway a try is a try  

[Skrollster]

the answer is it is already configurable :)
test 1.8 or 1.9 if you can find it... it is all in the ini file..

and i will not make 2.0 less configurable then 1.x has been.. so it will probably be easy to manage..

[Skrollster]

Damn, i remember something that i realy should add..

A language file..

I'll have to come up with some good generic solution for this.. else there will be now language file...

[MrZ]

Hia:))

Glad to see ya (and Glory) back on track Skrollster :))))

Been running 1.9 since ya released the beta and its the noust stable / bugfree script ive seen.

Will look over that command list during the day..

Z ya

[DarkElf]

Found Bug (if is a bug): chatstat

When you restart scripts or hub the chatstat is cleared...



Bye

[Skrollster]

DarkElf: I'm sorry to say it, but i realy need to know what version of glory you are running, you told me in PM that you did run 1.9, that doesnt say to much because i have been changeing 1.9 a lot overtime and haven't updated the version number as i should, but i think it will help to know what beta bulid you use any how... (I think i have fixed this bug though)

[DarkElf]

The last fix is:
-- v1.9 Fixed so that the script creates Glory Securitaz.ini if it is missing, By Skrollster Sept-22 2003

[Skrollster]

wich version of pt are you using??
my guess is that ChatStat:Save() never get called..
and that is because of something that makes so that the timer function doesn't work...
But i wouldn't care too much, i'm just rewriteing the whole chatstat, un fortunatly though it will not be 100% compatible with the old one.. =/

but untill the release try using !restartscript in main before restarts and reboots and see if it helps..

[DarkElf]

oh, don't worry...i not use chatstat (ps i run ptokax TD4)

[DarkElf]

Skrollster, i have a request for next version :P

You can leave the incompatibility to other script (sorry for my bad english), i use GS and a lot of more scripts and for most of them i must change the commands like #mhelp or #funny....pls

Bye

[Skrollster]

Originally posted by DarkElf
Skrollster, i have a request for next version :P

You can leave the incompatibility to other script (sorry for my bad english), i use GS and a lot of more scripts and for most of them i must change the commands like #mhelp or #funny....pls

Bye

Have a look in the ini file.. :D
just disable the error message and it will work with other scripts..

[DarkElf]

lol....I have always said..I'm stupid :D
Thanks


bye

[Skrollster]

I'v come to the conclution that rewriting GS from scratch takes some time...

i'm about 1/5 through now...

i havn't found a good generic solution for the language file problem yet... :\

so i will probably wait with that until 2.1
i will start with the documentation to morow...
it is necissery...

so far the scipt is about on 800 rows, all of you who thought my old script was easy to edit, just wait until(if i do) release the sourcecode for gs 2.0

There is still the thoughtes bit to code, and i don't know if i can do it on my own, but i hope i will be done then next week has ended.. (i have to write this, else there will be no new bot)

//Skrollster

[Skrollster]

Bad news:
Havn't done the documentation that i should have done today
Good news:
I have now implemented the long wanted !go command :)
and a quite complex !help function.. i think this will be loved.. =)

But there is a couple of things that i don't know how to solve, or i don't know how i want to solve them, not too hard, but hard to find a good generic solution..
right now i don't know i how i shall construct the ini file in the best way...

shall i save it as a table in a .dat file that isn't supposed to be altered by hand, or as plain text in a .txt file?

it's esier to do it the .dat way, but it might be betther the other way, what do you think?

//Skrollster

[plop]

use the way wich is easyest for the ppl who use it.
if you use the plain txt file you can still convert it 2 a table on the moment the script is launched.
takes a bit more lines 2 code but it works.

plop

[Skrollster]

it isn't hard to read a text file to a table that is for sure, but it is harder to write a table to a textfile so it gets easy to edit and understand what is what.. and if it isn't easy to edit, then i can as well save is as a table in a .dat file..

[plop]

how about a combination of both, use a command (!loadconfig) 2 convert the txt file into the .dat table version.

plop

[Skrollster]

So never save it back to the text file?
Nah.. all settings will be changeble from the script..

[plop]

well if it's the 1st time some1 uses it, it is the easyest 2 config.
and like you say after that they can change everything from the script so it's not needed anymore.
you could even make it a seperate script by using lua.exe 2 build the .dat.
got some more idea't but won't tease you with those.  lol

plop

[Skrollster]

No, please do, if you do i might share some of my latest knowlage about lua.. :P,
maybe even my source code for 2.0 as it is now, and i think that might be very intresting reading for you... =))

I'v thought about making a gui to set up gs before the first start, but i don't know to much about other programing so i think i will wait with that..

//Skrollster

[X]

Could you implement a Language file,
so it would be easer to translate it to many language.
 :)

X from Franceland.org

[pHaTTy]

Originally posted by Skrollster
No, please do, if you do i might share some of my latest knowlage about lua.. :P,
maybe even my source code for 2.0 as it is now, and i think that might be very intresting reading for you... =))

I'v thought about making a gui to set up gs before the first start, but i don't know to much about other programing so i think i will wait with that..

//Skrollster

hey m8, if you need a hand with making a gui, gimme a shout, give me a basic view on what you want, and ill sure help ya :)

Glory securitaz was my fav bot when i first used ptokax, still a great bot, altho i use my own, i still think it is great, so give me a shout if you want one done ;)

-phatty

[MrZ]

Hia

Sorry to say i just went over to another script after using Glory for a looong time now.

This due to lack of developing and updating the script...

Weeere did u go Skrollster??? imo u were (is) one of the best...still hope u will be back someday.

If not.. good luck, werever u are

Z ya

[Flux]

Hi Skrollster it's nice to see u around again, as you already know i am a fan of Glory Securitaz and i still use 1.8 and not 1.9 as you already if you remember.

The reason i don't use 1.9 is that it did not have Op level in like 1.8 example:

Master Flux has entered the hub
Networkfounder Flux has entered the hub

etc....

So i stuck with 1.8 and i don't use 1.9 and i would like too.

Hope to see your newest Glory Securitaz to be the finest as they always have been in the past.