Text only | Text with Images

PtokaX forum

Forum => News => Topic started by: PPK on 10 June, 2005, 02:21:13

Title: PtokaX 0.3.3.1 released...
Post by: PPK on 10 June, 2005, 02:21:13
Download on PtokaX homepage (http://www.ptokax.org) :]

QuoteChangelog...
Fixed: Crash on !restart (thx dkt and madman for report).
Fixed: Bug in registered users manager (thx TďMę?rĺVęll?R for report and reglist for testing).
Fixed: Missing opchat on !op and !addreguser (thx [AT]conejodelmal for report).
Fixed: Memory leaks on closing PtokaX.
Added: BW Traffic Report in xB/s to stats and gui (request by Friz and GeceBekcisi).
Added: Missing .px. PtokaX identification to end for hub description send by $HubINFO.
Added: Checkbox to profile manager to enable OpChat per profiles.
Added: Double click on scriptname open script in editor (request by Alexandros).
Added: getHubVersion() (request by plop).
Changed: Few small optimisations.
Changed: GetPtokaXLocation() now return in path / (like c:/PtokaX/) instead of \ (request by plop and bastya_elvtars).
Changed: Old update check. Now check small xml file on PtokaX homepage.

Note: to have working OpChat you need to enable it for profiles in profile manager ;)
Title:
Post by: bastya_elvtars on 10 June, 2005, 02:32:39
QuoteOriginally posted by PPK
Download on PtokaX homepage (http://www.ptokax.org) :]

QuoteChangelog...
Fixed: Crash on !restart (thx dkt and madman for report).
Fixed: Bug in registered users manager (thx TďMę?rĺVęll?R for report and reglist for testing).
Fixed: Missing opchat on !op and !addreguser (thx [AT]conejodelmal for report).
Fixed: Memory leaks on closing PtokaX.
Added: BW Traffic Report in xB/s to stats and gui (request by Friz and GeceBekcisi).
Added: Missing .px. PtokaX identification to end for hub description send by $HubINFO.
Added: Checkbox to profile manager to enable OpChat per profiles.
Added: Double click on scriptname open script in editor (request by Alexandros).
Added: getHubVersion() (request by plop).
Changed: Few small optimisations.
Changed: GetPtokaXLocation() now return in path / (like c:/PtokaX/) instead of \ (request by plop and bastya_elvtars).
Changed: Old update check. Now check small xml file on PtokaX homepage.

Nice one, thx, PPK! I wish I could test it now...  :rolleyes:
Title:
Post by: [PT]-=(?_?)=- on 10 June, 2005, 02:44:08
Hi!
That?s a good update. But OPChat does not work.
Title:
Post by: blackwings on 10 June, 2005, 02:44:12
nice release ppk !!! :D

I see that you have stopped using the bxx.xx format of version releases
Title:
Post by: ConejoDelMal on 10 June, 2005, 02:44:58
Really nice  :]

I speccially like the " BW Traffic Report in xB/s to stats and gui (request by Friz and GeceBekcisi)."

Started testing it already
Title:
Post by: ConejoDelMal on 10 June, 2005, 02:48:33
QuoteOriginally posted by [PT]-=(?_?)=-
Hi!
That?s a good update. But OPChat does not work.

It does, just have to allow it in Profile manager  ;)

working for me anyway..
Title:
Post by: GeceBekcisi on 10 June, 2005, 03:51:59
Coolest hubsoft :) Nice updates and a changelog like a weekly newspaper :] . I love PtokaX !
Title:
Post by: dkt on 10 June, 2005, 08:48:33
------------------------------------------------------------
Current stats:
------------------------------------------------------------
Version: PtokaX DC Hub 0.3.3.1 [debug] built on Jun 10 2005 01:42:32
Uptime: 0 days, 0 hours, 2 minutes
Users (Max/Actual Peak (Max Peak)/Logged) : 100 / 24 (24) / 24
Chat messages: 2 x
Unknown commands: 0 x
PM commands: 0 x
Key commands: 26 x
Supports commands: 26 x
MyINFO commands: 32 x
ValidateNick commands: 25 x
GetINFO commands: 0 x
Password commands: 26 x
Version commands: 24 x
UserIP commands: 0 x
GetNickList commands: 26 x
Search commands: 1 x
SR commands: 0 x
CTM commands: 3 x
RevCTM commands: 2 x
BotINFO commands: 0 x
------------------------------------------------------------
Mem usage: 1758 kB
------------------------------------------------------------
SendRests (Peak): 0 (0)
RecvRests (Peak): 0 (0)
Data sent: 482.44 kB
Data received: 7.38 kB
Tx (60 sec avg): 0 B/s (1.21 kB/s)
Rx (60 sec avg): 0 B/s (14 B/s)
Title:
Post by: Corayzon on 10 June, 2005, 09:09:21
Check for updates is now working :D
Title: please sharing new ptokax
Post by: gemini on 10 June, 2005, 11:05:31
please sharing new ptokax
thanks bye
Title:
Post by: bastya_elvtars on 10 June, 2005, 11:09:47
QuoteOriginally posted by gemini
please sharing new ptokax
thanks bye

http://www.ptokax.org/

Please read before posting.
Title: PtokaX DC Hub 0.3.3.1
Post by: gemini on 10 June, 2005, 11:12:02
PtokaX DC Hub 0.3.3.1
now it's not there
http://www.ptokax.org/
lol
bye
Title:
Post by: jiten on 10 June, 2005, 11:51:20
QuoteOriginally posted by gemini
PtokaX DC Hub 0.3.3.1
now it's not there
http://www.ptokax.org/
lol
bye
Open that page again and refresh it by clicking F5.
That should do it.

Cheers
Title: Thankz again to PtokaX
Post by: ScriptMaster on 10 June, 2005, 11:54:49
Great Update, really helpful =) unfortunate that i deleted my registeredusers file and now have to register over 300user again :( lol
Title: thanks jiten now functionally with F5
Post by: gemini on 10 June, 2005, 12:04:41
thanks jiten now functionally   :D
thank you very much
bye
Title:
Post by: blackwings on 10 June, 2005, 12:15:03
QuoteOriginally posted by ScriptMaster
Great Update, really helpful =) unfortunate that i deleted my registeredusers file and now have to register over 300user again :( lol
you should now and then make a backup of your user database ;)
Title:
Post by: Corayzon on 10 June, 2005, 18:03:33
Hey PPK,

Just came across a nice simple and quick to do idea :D

Can u add a lua User field named 'bKicked' that is used to check if a user was disconnected by ptokax?

My idea behind this is ... Users that get kicked by scripts or kicked by Ptokax can then be determined and there ip loged. Very smart for large servers that need logging, but cant log every users because its to much to filter through when checking (and file looping can take up alot of process with a a log that is over 4MB large!).

Let me know asap, Cheers
Title:
Post by: Dessamator on 10 June, 2005, 18:34:26
hmm, not a bad idea, it could be usefull
Title:
Post by: blackwings on 11 June, 2005, 03:43:11
hopefully a small request :) =

When a client gets disconnected by the ptokax support function, because the client is buggy or when a client gets disconnected if the clients tag isn't in the ClientTags.xml, instead of like saying its a unsupported client, can you add in the ptokax gui a checkbox and and a textbox, so that you could write your own message to this user that gets disconnected for the 2 reasons I mentioned. A message like this one =

*** Your client isn't allowed, use Dc++ = http://dcplusplus.sourceforge.net/
Title: In-Out messages problem
Post by: juda on 12 June, 2005, 23:00:08
Hay !!! I run script Intro-Outro and in all old releases script work,but don`t work in new 0.3.3.1  !!!
I try some other Intro-Outro scripts,but don`t work to. Any idea what problem is this ?
No syntax errors in script !!!
Please for any help !!!
Title:
Post by: bastya_elvtars on 12 June, 2005, 23:06:01
QuoteOriginally posted by juda
Hay !!! I run script Intro-Outro and in all old releases script work,but don`t work in new 0.3.3.1  !!!
I try some other Intro-Outro scripts,but don`t work to. Any idea what problem is this ?
No syntax errors in script !!!
Please for any help !!!

If you don't post the script, no one will be able to help you.
Title: Hay
Post by: juda on 13 June, 2005, 06:50:27
I can send script that I use with 17.03 version,but I try 3 or 4 scripts that I find in this forum and nobady work !!!
Here is one that I use and work in older versions...
Code Select
--// Random Intros and Outros
--// By Chaggydawg
--// Does it work?? Who knows these things??
--// Revision 0.2
--//  
--// revision x.1 by Uwv .. now seperated levels for intro's.. & converted to lua5 for ptokax
--// Rev. x.02 typ-o fixed
--// Rev. x.03 optimized and bugs fixed .. enjoy :0)

Botname = frmHub:GetHubBotName()

------------------------- dis/en-able  by level (change 2 anything but yes will stop)

-- intro's --
Aintro = yes     -- Admins
Ointro = yes     -- Op's
Vintro = yes     -- Vip's
Rintro = yes      -- Reg's

-- outro's --
Aoutro = yes     -- Admins
Ooutro = yes     -- Op's
Voutro = yes     -- Vip's
Routro = yes      -- Reg's


--------------------------intro's

introsA = {
        "In A Fiery Explosion [USERNAME] Appears.",
        "Sir [USERNAME] Of The East Lunatic Fringe Has Arrived.",
        "[USERNAME] Arrives Yelling And Screaming Like A Maniac.",
        }

introsO = {
        "[USERNAME] Arrives Ranting And Raving About Aliens Or Some Such Rot.",
        "The Demented [USERNAME] Has Arrived.",
        "[USERNAME] Arrives And Immediately Heads For The Light Like A Moth.",
        }

introsV = {
        "Brandishing What Looks Like A Hairbrush [USERNAME] Arrives.",
        "[USERNAME] Arrives An ElfGirl Under Each Arm",
        "[USERNAME] Appears Out Of Thin Air Scaring The Hell Out Of Janine.",
        }

introsR = {
        "[USERNAME] Runs In, Stubs Their Toe On A Couch And Falls Over A Table Landing On Janine.",
        "[USERNAME] Crashes Through The East Wall Arriving In The Hub.",
        "[USERNAME]  is here, How about a round of elfgirls for everyone?",
        }

--------------------------- outro's

outrosA = {
        "Jumping Through A Plate-Glass Window [USERNAME] Leaves The Hub.",
        "Aliens Rocks Abduct [USERNAME], And They Are Gone.",
        "[USERNAME] Begins Shrinking, And Eventually Disappears From The Hub.",
        }

outrosO = {
        "Janine Takes [USERNAME] By The Arm And Leads Them To Her Room Closing The Door.",
        "With Cat Like Reflexes [USERNAME] Leaps Out The Window And Is Gone.",
        "The Lights Momentarily Dim, And When They Come Back On [USERNAME] Is Gone.",
        }

outrosV = {
        "Three Giant Men In White Coats March In And Haul Away [USERNAME] Kicking and Screaming.",
        "[USERNAME] Leaves Through The Basement Door",
        "[USERNAME] Accidentally Walks Into Janines Room, Muffled Screams Are Heard For A Few Seconds But [USERNAME] Is Gone.",
        }

outrosR = {
        "Suddenly [USERNAME] Leaps Up And Bolts For The Door.",
        "[USERNAME] Tosses A Ten On Janine Dresser And Walks Out The Door.",
        "[USERNAME] Runs Around The Room Screaming And Then Leaps Out The Window.",
        }

---------------------------------------------------------------------

--// This function is fired when an operator enters the hub (change the NetWorkFounder, Master, Admin & Moderator as in your profiles.dat)

function OpConnected(curUser)
        local MsgLvl = GetProfileName(curUser.iProfile)
        if MsgLvl == "Operator" and Ointro == yes then
                local intro, x = string.gsub(introsO[math.random(1,table.getn(introsO))], "%b[]", curUser.sName)
                SendToAll(Botname, intro)
        elseif Aintro == yes and MsgLvl == "NetWorkFounder" or MsgLvl == "Master" or MsgLvl == "Admin" or  MsgLvl == "Moderator" then
                local intro, x = string.gsub(introsA[math.random(1,table.getn(introsA))], "%b[]", curUser.sName)
                SendToAll(Botname, intro)
        else
        end
end
       
--// This function is fired when an operator disconnects (change the NetWorkFounder, Master, Admin & Moderator as in your profiles.dat)

function OpDisconnected(curUser)
        local MsgLvl = GetProfileName(curUser.iProfile)
        if MsgLvl == "Operator" and Ooutro == yes then
                local outro, x = string.gsub(outrosO[math.random(1,table.getn(outrosO))], "%b[]", curUser.sName)
                SendToAll(Botname, outro)
        elseif Aoutro == yes and MsgLvl == "NetWorkFounder" or MsgLvl == "Master" or MsgLvl == "Admin" or  MsgLvl == "Moderator" then
                local outro, x = string.gsub(outrosA[math.random(1,table.getn(outrosA))], "%b[]", curUser.sName)
                SendToAll(Botname, outro)
        else
        end
end

--// This function is fired when a new user finishes the login  (change the Reg, & VIP as in your profiles.dat)

function NewUserConnected(curUser)
        local MsgLvl = GetProfileName(curUser.iProfile)
        if Rintro == yes and MsgLvl == "Reg" then      
                local intro, x = string.gsub(introsR[math.random(1,table.getn(introsR))], "%b[]", curUser.sName)
                SendToAll(Botname, intro)
        elseif MsgLvl == "VIP" and Vintro == yes then
                local intro, x = string.gsub(introsV[math.random(1,table.getn(introsV))], "%b[]", curUser.sName)
                SendToAll(Botname, intro)
        else
        end
end

--// This function is fired when an user disconnects  (change the Reg, & VIP as in your profiles.dat)

function UserDisconnected(curUser)
        local MsgLvl = GetProfileName(curUser.iProfile)
        if MsgLvl == "Reg" and Routro == yes then
                local outro, x = string.gsub(outrosR[math.random(1,table.getn(outrosR))], "%b[]", curUser.sName)
                SendToAll(Botname, outro)        
        elseif MsgLvl == "VIP" and Voutro == yes then
                local outro, x = string.gsub(outrosV[math.random(1,table.getn(outrosV))], "%b[]", curUser.sName)
                SendToAll(Botname, outro)
        else
        end
end
Title: Stupid me or?
Post by: juda on 13 June, 2005, 11:15:19
Hy ! I tested other script and in the end I found that script work,
just don`t show in-out message to myself...!!!
When the user entr to the hub,in-out mssg are showen only to other users...(user who enter can`t see his message).
This work only in new Ptoka in older versions can user see own message !!! Any idea ?
Title:
Post by: Dessamator on 13 June, 2005, 11:25:52
change the script using this pattern add this:
Code Select
user:SendData(Botname,outro)

after this :

Code Select
SendToAll(Botname, outro)
Title: ? error or just small mistake ?
Post by: juda on 13 June, 2005, 12:43:15
Hy & thanks for advice...I try to change this,but I think that must be in the end
---- SendToAll(Botname, outro)
Maybe is this strange thing related with Ptokax (something change in new version or???)

Any idea what this my be ?   BY
Title:
Post by: Dessamator on 13 June, 2005, 13:04:03
well, in theory its a feature, ppk seems to have done that deliberately(im unsure), the info is sent to everyone(excluding the person whos logging in) , i think that happens because the person hasnt logged in entirely !

 either way only ppk knows why, i think he said something about it in another thread!
Title:
Post by: ?[-?Genius?-]? on 13 June, 2005, 17:31:42
Hi ppl

I detect one error in massmasg

Ex: !massmsg teste

Bot working but if i try

Ex: !massmsg

                         __________________________________________________________________________
                        [__________________________________________________________________________]

               bla bla bla

                         __________________________________________________________________________
                        [__________________________________________________________________________]  

Dont?work, sory my inglish :(

Its a good ptokax, problema is the massmsg :(

[][][] Genius
Title:
Post by: TTB on 13 June, 2005, 17:54:19
Feature request...

!topic    - change topic
!topic                 - view topic


2nd one doesn't exist yet. Could be handy when ppl put links in the topic!

It could be RC10e, but when users sending there message to PMtoOPs, they don't get any respons. It would be nice if there is....

Keep up the good work PPK! I run now 0.3.3.1 without any probs...!
Title:
Post by: ??????Hawk?????? on 13 June, 2005, 18:27:36
Quote!topic - view topic

hehehehehe    " Look UP "  do you need a command to show you whats already displayed.   :P  :P


FIne Piece of Work PPK

running error Free this end..

??????Hawk??????
Title:
Post by: Dessamator on 13 June, 2005, 19:09:32
QuoteOriginally posted by •[-•Genius•-]•
Hi ppl

I detect one error in massmasg

Ex: !massmsg teste

Bot working but if i try

Ex: !massmsg

                         __________________________________________________________________________
                        [__________________________________________________________________________]

               bla bla bla

                         __________________________________________________________________________
                        [__________________________________________________________________________]  

Dont?work, sory my inglish :(

Its a good ptokax, problema is the massmsg :(

[][][] Genius

i tried it and it worked perfectly, the only (nice) change i noticed is that it doesnt send the mass to the (sender) besides that everything is fine
Title:
Post by: TTB on 13 June, 2005, 20:49:57
QuoteOriginally posted by ??????Hawk??????
Quote!topic - view topic

hehehehehe    " Look UP "  do you need a command to show you whats already displayed.   :P  :P


FIne Piece of Work PPK

running error Free this end..

??????Hawk??????

You don't get it. First of all, a topic can be longer then can be displayed in the client... Second, if someone put this link in the topic:

"Hi! Check this site: http://frontpage.fok.nl/nieuws/54966 "

(just an example)... then !topic is much easier!! *Click*

Greetz
Title:
Post by: bastya_elvtars on 13 June, 2005, 22:42:47
It takes approx. 5 lines to script.
Title:
Post by: Dessamator on 13 June, 2005, 22:44:15
hmm, indeed good point, but why not just send a banner? its simpler for those cases , whats the use of adding a big topic if the ppl cant see it ???
Title:
Post by: TTB on 13 June, 2005, 23:54:07
QuoteOriginally posted by Dessamator
hmm, indeed good point, but why not just send a banner? its simpler for those cases , whats the use of adding a big topic if the ppl cant see it ???

A banner mostly can't be changed by users... and has a timer on it... That's why I think this 5 lines  can be added (in my oppinion)

And I request this because it ppl in my hub put links in the topic...
Title:
Post by: ConejoDelMal on 14 June, 2005, 04:15:06
try this:

Code Select
sBot = "Topic_Bot"

sTopic = frmHub:GetHubTopic()

function ChatArrival(curUser, sData)
local s,e,cmd = string.find( sData, "^%b<>%s+(%S+)%s*(%S*)|$" )
if (cmd=="!stopic") then
curUser:SendData(sBot, sTopic)
return 1
end
end
might not be perfect... I'm still learning how to code :P
Title:
Post by: Dessamator on 14 June, 2005, 11:27:41
change this
Code Select
curUser:SendData(sBot, sTopic)

to this ::

Code Select
curUser:SendData(sBot,frmHub:GetHubTopic() )

since ur using the that api only once no need to put it in a variable !
Title:
Post by: Ubikk on 14 June, 2005, 13:44:13
I'm not satistied with 0.3.3.1 because it automaticly disconnects users with rmDC++
I know it's a buggy client, but a lot of my friends are using it, including me. It would be better if this feature could be turned off (allow/not allow users using rmDC++)
Title:
Post by: Dessamator on 14 June, 2005, 13:55:50
well, u have 2 solutions use a script to send them a msg to change their buggy clients, or go back to a previous version of ptokax which allowed that, because that request has been made b4, and if i remember correctly ,
PPK didnt change anything !
Title:
Post by: Ubikk on 14 June, 2005, 14:05:15
atm i use ptokax 0.3.3.0 b17.03 and it works just fine with buggy clients :D
You dont understant... i dont want the users to change their buggy clients... all i want is a way to keep these clients... all the users from my hub are from the same local network and everything works fine even with those clients. If we decide to change them it should be OUR option and not the hubsoft's ... this is just annoying  :(
Wich is the last PtokaX version that allows rmDC++ clients?
Title:
Post by: Dessamator on 14 June, 2005, 14:23:24
hmm, well, no1 forced u to change anything, either way the last version, i think was 17.08 just test it and find out
Title:
Post by: ??????Hawk?????? on 14 June, 2005, 15:27:39
QuoteOriginally posted by Ubikk
atm i use ptokax 0.3.3.0 b17.03 and it works just fine with buggy clients :D
You dont understant... i dont want the users to change their buggy clients... all i want is a way to keep these clients... all the users from my hub are from the same local network and everything works fine even with those clients. If we decide to change them it should be OUR option and not the hubsoft's  ... this is just annoying  :(
Wich is the last PtokaX version that allows rmDC++ clients?


It is NOT the hubs soft  ..  you should be taking this up with the Creator of Said  " BUGGY Clients "  NOT the creator or Ptokax.

PPK is doing a Great Job here and shouldnt be asked to allow for these clients..


HAWK
Title:
Post by: PPK on 14 June, 2005, 15:44:46
QuoteOriginally posted by Ubikk
It would be better if this feature could be turned off (allow/not allow users using rmDC++)
It would be better to use DC protocol compatible client :P If client send bad command is disconnected, for me is here no other way...
Title:
Post by: TTB on 14 June, 2005, 17:31:41
QuoteOriginally posted by [AT]conejodelmal
try this:

Code Select
sBot = "Topic_Bot"

sTopic = frmHub:GetHubTopic()

function ChatArrival(curUser, sData)
local s,e,cmd = string.find( sData, "^%b<>%s+(%S+)%s*(%S*)|$" )
if (cmd=="!stopic") then
curUser:SendData(sBot, sTopic)
return 1
end
end
might not be perfect... I'm still learning how to code :P

Thanx, but I already created that..... ghehe. It is just more finished when it is in the PtokaX release, and not in a script loaded by the scripts section.
Title:
Post by: Dessamator on 14 June, 2005, 17:36:13
Good Luck convincing PPK to add that m8, :), just bribe him :))
Title: Ptokax K.O. on connection flood
Post by: ruspant on 14 June, 2005, 18:52:42
I've got a nasty someone who enjoys himself flooding my hub with connections a couple of time a day...
The problem is  ptokax (0.3.3.1 dbg) crashes any time.

[18:33:28] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:29] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:30] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:31] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:32] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:33] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:44] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.
[18:33:45] <(+Mastro?di?Chiavi+)> *** Connection flood from IP 151.44.53.79 detected.

I've set a TempBan on "New Connection from same IP" with a rate of 10 on 60 secs.
The problem is that the ip is banned but since the flood continues, the message still comes out and then the hub falls.


---------------------------14/06/2005 18.29.35---------------------------
Exception 'EStackOverflow' in module WS2HELP.dll at 000004B7
Stack overflow

Call stack:
:71A214B7 [WS2HELP.dll]
:71A33D07 [WS2_32.dll]
:71A40F1B [WS2_32.dll]
:018E4427 [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]
:71A39680 [WS2_32.dll]
:018E37E1 [nl_lsp.dll]
:018E443A [nl_lsp.dll]

Main Thread ID = 00000904, Current Thread ID = 00000904
Registers:
EAX = 00000002  CS = 001B  EIP = 71A214B7  Flags = 00010202
EBX = 7C8097DF  SS = 0023  ESP = 00033000    EBP = 00033004
ECX = 006EDDC0  DS = 0023  ESI = FFFFFFFF    FS  = 003B
EDX = 00000014  ES = 0023  EDI = 00033054    GS  = 0000
Code at CS:EIP
56 8D 04 40 C1 E0 04 57 8D 74 08 04 6A 02 8D 46
Stack:
02082778 00033014 71A33D07 006EDDC0 00000568
00000000 00000000 018E443A 00535205 011A9528
005FDB0B 011923C8 00000000 00000000 011E93E4
018E443A FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF

Additional info:
Application Title : PtokaX DC Hub 0.3.3.1 [debug]
Major : 5
Minor : 1
Build : 2600
SP : 2
Type : 1
iJoins: 260, iParts: 209, iLogged: 42
NicklistLen : 659
OplistLen   : 217
MyInfosLen  : 2727
MyInfosTagLen  : 3951
QueueA Size : 1388
QueueA Len : 0
QueueB Size   : 110
QueueB Len   : 0
PQueue Size  : 15
PQueue Len  : 0
HQueueA Size  : 113
HQueueA Len  : 0
HQueueB Size  : 43
HQueueB Len  : 0
OPQueueA Size  : 168
OPQueueA Len  : 0
OPQueueB Size  : 211
OPQueueB Len  : 0
InfoQueue Size  : 153
InfoQueue Len  : 0
OQ-QueueA Size  : 314
OQ-QueueA Len  : 0
OQ-QueueB Size  : 31
OQ-QueueB Len  : 0


Obviously.. if I block the flooding IP with my FW .. the problem ends for a while... at least since my nasty user does not changes his dyn IP...

Any hints ?
Title:
Post by: Ubikk on 14 June, 2005, 19:09:05
QuoteOriginally posted by ??????Hawk??????
QuoteOriginally posted by Ubikk
atm i use ptokax 0.3.3.0 b17.03 and it works just fine with buggy clients :D
You dont understant... i dont want the users to change their buggy clients... all i want is a way to keep these clients... all the users from my hub are from the same local network and everything works fine even with those clients. If we decide to change them it should be OUR option and not the hubsoft's  ... this is just annoying  :(
Wich is the last PtokaX version that allows rmDC++ clients?


It is NOT the hubs soft  ..  you should be taking this up with the Creator of Said  " BUGGY Clients "  NOT the creator or Ptokax.

PPK is doing a Great Job here and shouldnt be asked to allow for these clients..


HAWK

You dont understand :)
What I meant was that it should be the admin's decission if his hub will allow rmDC users or not ! It seems fair to me :(
Title:
Post by: PPK on 14 June, 2005, 19:15:47
QuoteOriginally posted by Ubikk
What I meant was that it should be the admin's decission if his hub will allow rmDC users or not !
PtokaX is DC hub and DC hub is for DC clients, if client is not DC compatible then is not allowed :P
Title:
Post by: Dessamator on 14 June, 2005, 19:34:19
indeed, another thing, why does it emulate other dc clients, if it was a true dc client, it wouldnt have to emulate, it could use its own ! in theory
Title:
Post by: ??????Hawk?????? on 14 June, 2005, 20:32:38
QuotermDC++ discontinued. Forum Closed.
Every good thing has to end.
You can still download rmDC++ on #####.####.###

Greets to all that supported us. All users, sourcecode-providers, phreakers, our families.
We truly loved you all.

Official statement by coder RM. :
I am terribly sorry, but since forum has been hacked, I changed my idea to everything
and rmDC++ project will be stopped forever. I don't have many strength to continue
and to fix all bugs. It's true that I copied everything from StrongDC++ and CZDC++
except some little stuff which is very buggy. So use some alternate client.  

Thanks for everything!
/ RM. & Loverius
Title:
Post by: TTB on 14 June, 2005, 20:33:10
QuoteOriginally posted by Dessamator
indeed, another thing, why does it emulate other dc clients, if it was a true dc client, it wouldnt have to emulate, it could use its own ! in theory

There you got a good point... I don't even know this client, or the existance...

Regulair users can use DC++... wouldn't be that big problem, would it...
Title:
Post by: Ubikk on 14 June, 2005, 21:04:55
You guys still don't understant...
I already knew this information about rmDC++. I know it's a very buggy clients and the fact that other clients are better.
The reason why me and some friends of mine still user this program is our concern. Users from my hub including the admin (that's me) would like to continue using rmDC until a better version of Strong DC will appear.
PtokaX shouldn't interdict any clients... the admin should if he feels that's a right thing to do for his users.
I am the admin.. i have decided to keep rmDC users on my hub.. so, what can I do about that ?  Absolutely nothing...   X(
Title:
Post by: ??????Hawk?????? on 14 June, 2005, 21:13:34
QuoteOriginally posted by Ubikk
You guys still don't understant...
I already knew this information about rmDC++. I know it's a very buggy clients and the fact that other clients are better.
The reason why me and some friends of mine still user this program is our concern. Users from my hub including the admin (that's me) would like to continue using rmDC until a better version of Strong DC will appear.
PtokaX shouldn't interdict any clients... the admin should if he feels that's a right thing to do for his users.
I am the admin.. i have decided to keep rmDC users on my hub.. so, what can I do about that ?  Absolutely nothing...   X(


SHeeeeeesh  I GIVE IN..


USE ANOTHER HUB SOFT M8  ...   Problem solved...


* EDIT *

Unless you have Paid for the Software you have ABSOLUTLY NO  right to display Anger in your Posts..
Title:
Post by: Dessamator on 14 June, 2005, 21:22:04
QuoteOriginally posted by Ubikk
You guys still don't understant...
I already knew this information about rmDC++. I know it's a very buggy clients and the fact that other clients are better.
The reason why me and some friends of mine still user this program is our concern. Users from my hub including the admin (that's me) would like to continue using rmDC until a better version of Strong DC will appear.
PtokaX shouldn't interdict any clients... the admin should if he feels that's a right thing to do for his users.
I am the admin.. i have decided to keep rmDC users on my hub.. so, what can I do about that ?  Absolutely nothing...   X(

u do theres freedom of choice, u can choose another hubsoft, u can refrain from upgrading to the newest version, you can do what ttb suggested and many many other choices !
Title:
Post by: Ubikk on 14 June, 2005, 21:28:25
sorry.. i'm not angry... :)
Anyway, I agree with you... rmDC is the problem, not PtokaX. I will stop from upgrading my hubsoft until I'll get a decent version of Strong DC.

P.S: I love PtokaX to much, so I can't just use another hubsoft  :D
Title:
Post by: TTB on 14 June, 2005, 23:21:34
Didn't you try then to set you rmDC++ client in another mode (like I posted before)??
Title:
Post by: Pothead on 15 June, 2005, 00:28:13
Why not accept that rmDC is a illegal buggy pile of shit, and just upgrade to a decent client. :) hehe.  As for Strong DC, it's not hard to get either the Release builds or CVS ones. :)
Title:
Post by: TTB on 15 June, 2005, 01:07:13
QuoteOriginally posted by Pothead
Why not accept that rmDC is a illegal buggy pile of shit, and just upgrade to a decent client. :) hehe.  As for Strong DC, it's not hard to get either the Release builds or CVS ones. :)

Well.. I agree with that. DCDM++ is THE client for me :P Btw Pothead, is the searchpart I requested in the new DCDM?
Title:
Post by: TecMaster on 15 June, 2005, 07:06:01
Both DCDM++ and StrongDC is much better alternative ...
Title:
Post by: blackwings on 15 June, 2005, 09:31:29
QuoteOriginally posted by ruspant
I've got a nasty someone who enjoys himself flooding my hub with connections a couple of time a day...
The problem is  ptokax (0.3.3.1 dbg) crashes any time.
ruspant, post the bug log here please = click here (http://board.univ-angers.fr/thread.php?threadid=4779&boardid=8&sid=c7877df5b0cc6e98548e795c30c069f0&page=1#6)
Title:
Post by: Ubikk on 15 June, 2005, 10:27:41
QuoteOriginally posted by Pothead
Why not accept that rmDC is a illegal buggy pile of shit, and just upgrade to a decent client. :) hehe.  As for Strong DC, it's not hard to get either the Release builds or CVS ones. :)

I already have strong dc cvs114.. it's just that i'm not satisfied with this progam yet..  it still need some improvments ;)
Anyway... until i get what i'll want from a dc client, i'll continue to use rmDC :) Anyway, today i'll test DCDM++ .. who knows.. maybe i'll get lucky :)

P.S: i already know rmDC is a buggy pile of shit :D but i have my reasons  :rolleyes:
Title:
Post by: blackwings on 15 June, 2005, 10:43:28
QuoteOriginally posted by Ubikk
P.S: i already know rmDC is a buggy pile of shit :D but i have my reasons  :rolleyes:
because it has multi download right :P personally I think multi-source download clients just ruins it for everyone, because you take some of several peoples upload, which gives less to others. It maybe ok when 1 user has it, but when there are several or many, everyone upload gets screwed. So really, change to a better client, like dcdm++ and for non ops, dc++.
Title:
Post by: Rahxie on 15 June, 2005, 11:42:55
delete it, it's detected as spyware by mcaffee and its known to be infected with spyware, also it's not opensource ;)
Title:
Post by: Pothead on 15 June, 2005, 11:59:09
QuoteOriginally posted by TTB
Btw Pothead, is the searchpart I requested in the new DCDM?
Only thing which has been done so far since the release is the fix Gandalf posted for the Column order bug (the column stuff is CZDC code, but CZDC doesn't have that bug ?( ).
http://www.imperialnet.org/forum/viewtopic.php?t=1792

As for autosearch, Sulan doesn't want this in DCDM, because of memory leaks from searching in 0.401. ?(

QuoteOriginally posted by Ubikk
I already have strong dc cvs114.. it's just that i'm not satisfied with this progam yet..  it still need some improvments ;)
Anyway... until i get what i'll want from a dc client, i'll continue to use rmDC :) Anyway, today i'll test DCDM++ .. who knows.. maybe i'll get lucky :)
Leechers don't generally like DCDM, for more reason than one.  :] You need improvements in Strong ? It's better than rmDC, but you still need improvements ? Okay then, whatever. ?(
Have a look at other leecher clients, like Reverse Connect, LDC, zDC, RCDM++.  May suit you better. :)
Title:
Post by: Ubikk on 15 June, 2005, 12:23:37
QuoteOriginally posted by Ubikk
the improvment i'm waiting is very minor  :D
It's related to their users interface... i'm waiting for them to release a version wich has smilies in PM too, not only in mainchat  :P
Title:
Post by: Madman on 15 June, 2005, 12:27:21
QuoteOriginally posted by Ubikk
the improvment i'm waiting is very minor  :D
It's related to their users interface... i'm waiting for them to release a version wich has smilies in PM too, not only in mainchat  :P

If you talking about Strong.. There allready is...
I belive it always has been.....
Title:
Post by: Ubikk on 15 June, 2005, 13:00:16
Sorry.. i meant the smilie button like in mainchat ! :D
Besides... I don't like the fact that : - ) works for :) and : ) doesnt work and other things like that...  :D

If I could only get a plugin to fix these things i would delete rmDC in a second  :D
Title:
Post by: blackwings on 15 June, 2005, 13:11:54
QuoteOriginally posted by Ubikk
Sorry.. i meant the smilie button like in mainchat ! :D
Besides... I don't like the fact that : - ) works for :) and : ) doesnt work and other things like that...  :D
heh, so the reason for using rmdc is just because of its smilies :P
Title:
Post by: Ubikk on 15 June, 2005, 13:13:42
QuoteOriginally posted by blackwings
QuoteOriginally posted by Ubikk
Sorry.. i meant the smilie button like in mainchat ! :D
Besides... I don't like the fact that : - ) works for :) and : ) doesnt work and other things like that...  :D
heh, so the reason for using rmdc is just because of its smilies :P

well..  i like the interface :D In rest, i'm not satisfied at all with the program.. besides... I dont use it to download that much... i just like to chat with my friends on my hub  :D

(total uploaded: 832,45 GB total downloaded: 13,23 GB)  :]
Title:
Post by: PPK on 15 June, 2005, 16:02:46
QuoteOriginally posted by ruspant
I've got a nasty someone who enjoys himself flooding my hub with connections a couple of time a day...
The problem is  ptokax (0.3.3.1 dbg) crashes any time.
Is sad but it looks like someone find how to crash PtokaX with use of bug in Windows, as you see in your crashlog here is nothing from PtokaX it show only system .dlls X( I try to find any solution... but i don't have now any idea, it looks imposible to fix :(
QuoteOriginally posted by ruspant
Any hints ?
You find hint yourself, ban on fw is now only way to protect hub :(
Title:
Post by: Dessamator on 15 June, 2005, 16:07:10
all this trouble because of smilies, thats really interesting, use msn messenger or something, ur forgetting that one of dc's primary task is download and not chatting :), and Ptokax just facilitates that task !
Title:
Post by: Pothead on 15 June, 2005, 16:33:18
Any way to not use them DLL's ? :)
Title:
Post by: ruspant on 15 June, 2005, 16:38:47
PPK, Ptokax should obviously listen to winsock connections to recognize the incoming IP...
It would be nice if ptokax could send the flooder IP to an IP blocking app (FW).
Now I've got 2 problems:
1) how could ptokax invoke external commands ?
2) what kind of FW cound accept a new blocking rule coming from a command line ?

Obviously I'm using my fantasy trying to help you to find new solutions.  I don't actually know if this way should go :P

Most of italian connection uses dynamic IP assignements so firewalling sets a really short time solution...

I'm also wondering about an IP filtering driver (protowall-like) linked by ptokax, which could also have a low level ban list ... but i guess it's a hard fantasy  :D

Best regards
Title:
Post by: PPK on 15 June, 2005, 17:11:29
QuoteOriginally posted by Pothead
Any way to not use them DLL's ? :)
How do you want to use PtokaX without using winsock  ?( :D But you got point, nl_lsp.dll is not windows dll... now only find wtf is this and kill it because i don't have this dll in my system and here PtokaX not crash on connection flood :]
QuoteOriginally posted by ruspant
PPK, Ptokax should obviously listen to winsock connections
And netlimiter (thx Pothead to kick me to find where is problem) do it too and crashing your PtokaX :D Maybe is time for you to use another app instead of buglimiter :] PtokaX is not alone who is crashed by netlimiter, for example from DC ... StrongDC++ have with this problem too and if you use google then you find more other apps having this problems because netlimiter  X(
Title:
Post by: Ubikk on 15 June, 2005, 18:37:23
QuoteOriginally posted by Dessamator
all this trouble because of smilies, thats really interesting, use msn messenger or something, ur forgetting that one of dc's primary task is download and not chatting :), and Ptokax just facilitates that task !

Don't get me wrong .. the users from my hub are completly satisfied with the download part ;) but fortunately they are very active and lots of them use rmDC++ that's why they like their chat to be as pleasent as possible... anyway.. i suggest ending the rmDC problem here... (this is a topic about PtokaX anyway...) i will upgrade to strongdc soon .. so i guess the "block rmdc client" option wont bug me anymore  :D

I just hope that in the near future PtokaX developers won't block StrongDC as well..  :rolleyes:
Title:
Post by: blackwings on 15 June, 2005, 18:45:45
QuoteOriginally posted by Ubikk
I just hope that in the near future PtokaX developers won't block StrongDC as well..  :rolleyes:
I dont think so. strongdc++ doesn't have buggy support/myinfo, so their shouldn't be a reason for future version of ptokax to block strongdc++
Title:
Post by: ruspant on 15 June, 2005, 19:16:33
I'm using netlimiter 'cause it's quite useful for limiting other apps not Ptokax  :))
I've got no problem in the past using it.
I will test some more and if the problem is the badwidth limiting sw, I simply will not use it anymore.

Obviously there's no way to avoid winsock !  :D  I let my fantasy run too fast, wondering about a sort of inbuilt FW :P ...  plz don't mind ehehe

thx a lot for your prompt reply, always the first in line
Title:
Post by: Dessamator on 15 June, 2005, 20:22:07
QuoteOriginally posted by Ubikk
QuoteOriginally posted by Dessamator
all this trouble because of smilies, thats really interesting, use msn messenger or something, ur forgetting that one of dc's primary task is download and not chatting :), and Ptokax just facilitates that task !

Don't get me wrong .. the users from my hub are completly satisfied with the download part ;) but fortunately they are very active and lots of them use rmDC++ that's why they like their chat to be as pleasent as possible... anyway.. i suggest ending the rmDC problem here... (this is a topic about PtokaX anyway...) i will upgrade to strongdc soon .. so i guess the "block rmdc client" option wont bug me anymore  :D

I just hope that in the near future PtokaX developers won't block StrongDC as well..  :rolleyes:

hmm indeed i agree that we end this useless chatter about rmdc, its dead  and buried as of now :)
Title:
Post by: PPK on 15 June, 2005, 20:37:35
QuoteOriginally posted by Ubikk
I just hope that in the near future PtokaX developers won't block StrongDC as well..  :rolleyes:
StrongDC++ as CZDC++ mod use my source (and my bugs :D ), release own source and is in active developing... is not problem if i find bug to report it (or fix it if is my bug) and see it fast fixed in Strong ;) And btw StrongDC++ work very good with PtokaX and PtokaX with it use less badwith than with DC++ :]
Title: Added: getHubVersion() (request by plop).
Post by: (NL)waarom on 17 June, 2005, 08:51:48
Pkk
gethubversion is added
only thing is when i put this =====
this hub is running   "..getHubVersion().." \r\n"
in my add mass i get this in the mass  
this hub is running    Ptokax  
and i whant him to display
This hub is running    PtokaX DC Hub 0.3.3.1
how to do this
thnx in advance Waarom
Title:
Post by: Madman on 17 June, 2005, 12:28:29
From the script txt file..
Code Select
getHubVersion() -- Return appname and version like name, ver = getHubVersion() -> name = "PtokaX", ver = "0.3.3.1"
So this is how you use it...
Code Select
px,ver = getHubVersion()
SendToAll(tConfig.Bot.Name, "This hub [" ..HubName.. "] runs MadSecurity " ..Version.. " on " ..px.. " "..ver) return 1
Title:
Post by: uffetjur on 17 June, 2005, 14:51:12
just love this latest version!

running without any problem at all!

------------------------------------------------------------
Current stats:
------------------------------------------------------------
Version: PtokaX DC Hub 0.3.3.1 [debug] built on Jun 10 2005 01:35:21
Uptime: 5 days, 7 hours, 12 minutes
Users (Max/Actual Peak (Max Peak)/Logged) : 1000 / 381 (389) / 327
Chat messages: 2671 x
Unknown commands: 0 x
PM commands: 4273 x
Key commands: 9300 x
Supports commands: 9219 x
MyINFO commands: 23345 x
ValidateNick commands: 9276 x
GetINFO commands: 1 x
Password commands: 7923 x
Version commands: 7818 x
UserIP commands: 314 x
GetNickList commands: 7866 x
Search commands: 603399 x
SR commands: 404449 x
CTM commands: 27288812 x
RevCTM commands: 5048673 x
BotINFO commands: 0 x
------------------------------------------------------------
CPU usage (60 sec avg): 2.12%
CPU time: 3:04:03
Mem usage (Old style): 2343 kB
Mem usage (Peak): 9.19 MB (17.13 MB)
VM size (Peak): 21.53 MB (32.43 MB)
------------------------------------------------------------
SendRests (Peak): 0 (0)
RecvRests (Peak): 0 (4)
Data sent: 16.22 GB
Data received: 1.79 GB
Tx (60 sec avg): 3.57 kB/s (38.03 kB/s)
Rx (60 sec avg): 3.57 kB/s (3.62 kB/s)
Title:
Post by: blackwings on 17 June, 2005, 18:55:22
QuoteOriginally posted by uffetjur
just love this latest version!

running without any problem at all!
except for the hub pinger right ;)

anyway, PPK, any news on the progress on fixing the bug in the hub pinger?
Title:
Post by: GeceBekcisi on 17 June, 2005, 19:09:19
Today:
have you found why the hublist pinger didnt request userlist? i noticed it is only doing this in 0.3.3.1 release, versions below 17.09b are working really fine
hi, no.. i don't know why

no news on this so far :(
Title:
Post by: blackwings on 17 June, 2005, 19:32:44
QuoteOriginally posted by GeceBekcisi
Today:
have you found why the hublist pinger didnt request userlist? i noticed it is only doing this in 0.3.3.1 release, versions below 17.09b are working really fine
hi, no.. i don't know why

no news on this so far :(
whats the difference between the normal 17.09 and 17.09b? + could you like upload it somewhere so I maybe can download it  :)
Title:
Post by: [T-G-T]M@sto on 17 June, 2005, 19:48:10
Quotewhats the difference between the normal 17.09 and 17.09b? + could you like upload it somewhere so I maybe can download it  :)
The latest version can be downloaded here: http://www.ptokax.org/
Title:
Post by: GeceBekcisi on 17 June, 2005, 20:13:04
PtokaX DC Hub 0.3.3.0 build 17.09b ChangeLog:
Fixed: Crash on !restart (thx dkt and madman for report).
Fixed: Bug in registered users manager (thx T?M??r?V?ll?R for report and reglist for testing).
Fixed: Missing opchat on !op and !addreguser (thx [AT]conejodelmal for report).
Fixed: Memory leaks on closing PtokaX.
Added: BW Traffic Report in xB/s to stats and gui (request by Friz and GeceBekcisi).
Added: Missing .px. PtokaX identification to end for hub description send by $HubINFO.
Added: Checkbox to profile manager to enable OpChat per profiles.
Added: Double click on scriptname open script in editor (request by Alexandros).
Changed: Few small optimisations.
Changed: GetPtokaXLocation() now return in path / (like c:/PtokaX/) instead of \ (request by plop and bastya_elvtars).

PtokaX DC Hub 0.3.3.1 ChangeLog:
Fixed: Crash on !restart (thx dkt and madman for report).
Fixed: Bug in registered users manager (thx T?M??r?V?ll?R for report and reglist for testing).
Fixed: Missing opchat on !op and !addreguser (thx [AT]conejodelmal for report).
Fixed: Memory leaks on closing PtokaX.
Added: BW Traffic Report in xB/s to stats and gui (request by Friz and GeceBekcisi).
Added: Missing .px. PtokaX identification to end for hub description send by $HubINFO.
Added: Checkbox to profile manager to enable OpChat per profiles.
Added: Double click on scriptname open script in editor (request by Alexandros).
Added: getHubVersion() (request by plop).
Changed: Few small optimisations.
Changed: GetPtokaXLocation() now return in path / (like c:/PtokaX/) instead of \ (request by plop and bastya_elvtars).
Changed: Old update check. Now check small xml file on PtokaX homepage.

You can download it from PPK's hub, if someone is sharing but I dont think you'll need to use while there is 0.3.3.1
Title:
Post by: blackwings on 17 June, 2005, 20:23:03
ok, if the bold changes in the 0.3.3.1 changelog is the only difference to 17.09b, then 17.09 is what I chose. I have already downloaded it :)
Title:
Post by: Tw?sT?d-d?v on 18 June, 2005, 21:15:30
Just to let you know i got my first hublistpinger today..Running 0.3.3.1    =)
Title:
Post by: Dessamator on 18 June, 2005, 21:55:56
hmm, so it wasnt the ptokax's fault afterall , or maybe they changed the pinger to suit the new ptokax .
Title:
Post by: yoonohoo on 19 June, 2005, 05:28:14
QuoteJust to let you know i got my first hublistpinger today..Running 0.3.3.1
Same here... ;)
Title:
Post by: Star on 19 June, 2005, 20:34:14
Some questions and stuff:
- Make the "Minimize om startup" work
- Could u add a CLS button in ScriptEditor window?
- Add so the bolder, between the ScriptEditor and the SyntaxBox, position is saved on exit
- If u change the windows size from the top and drag it down the hole window moves. The same it from left to right
- If u change the window size to bigger and then drag the ScriptEditor bolder as high as it goes. And then resize the PX window to as small as it gets. The bolder don't follow and desapear.
- Is it posseble to change the "Restart Scripts" button to a "Restart Scripts/TXT" button
- Add so the hubname is updated to the users when u change the hubname with a command. (I use RoboCop command)
- Add multi host. Like "2nd ports"
- Add a Stat Window that showes the same info that !stats do

This one is harder to explane, but I will give it a try.
- Perfect columns in lua if posseble
Some function to make perfect columns in scripts. Useful in lists etc
One ide is a function so it count tabs from the "left-beginning" and not from the "left-last-text"
Example:
Code Select
Some Texts The scripts insert 4 tabs and lands here
_________Some Texts The scripts insert 4 tabs and lands here
________________Some Texts The scripts insert 4 tabs and lands hereThe script should count from before "Some" on the left...
I hope u understand what I mean. :)

Thanks //Star
Title:
Post by: Pothead on 19 June, 2005, 20:46:08
QuoteOriginally posted by Star
This one is harder to explane, but I will give it a try.
- Perfect columns in lua if posseble
Some function to make perfect columns in scripts. Useful in lists etc
This is slightly hard, as it's got to find out what Font the user has set, and change the spacing according to that.  For every user.  Personally i don't think it's possible (even though it would be a very nice touch).
Title:
Post by: GeceBekcisi on 19 June, 2005, 20:57:03
QuoteOriginally posted by Star
- Add a Stat Window that showes the same info that !stats do

This one will cause PtokaX use CPU more so it will not be implemented (cos once I asked the same and got that logical answer)
Title:
Post by: Star on 19 June, 2005, 21:11:20
QuoteOriginally posted by GeceBekcisi
This one will cause PtokaX use CPU more so it will not be implemented (cos once I asked the same and got that logical answer)

Ok. Maybe a buttun to update the info then. And not AutoUpdate it. This sholdn't take any CPU without auto-update

//Thanks Star
Title:
Post by: Dessamator on 19 June, 2005, 21:39:46
QuoteOriginally posted by Pothead
QuoteOriginally posted by Star
This one is harder to explane, but I will give it a try.
- Perfect columns in lua if posseble
Some function to make perfect columns in scripts. Useful in lists etc
This is slightly hard, as it's got to find out what Font the user has set, and change the spacing according to that.  For every user.  Personally i don't think it's possible (even though it would be a very nice touch).

hmm, indeed i agree, ptokax doesnt know what font's users use, and i dont think it can find out, so i doubt it can be done
Title:
Post by: Star on 19 June, 2005, 21:48:43
QuoteOriginally posted by Dessamator
hmm, indeed i agree, ptokax doesnt know what font's users use, and i dont think it can find out, so i doubt it can be done
Hmm.. why chould it know what font users have. This way is useful independent witch font users have.
Title:
Post by: Star on 19 June, 2005, 21:52:22
PPK: Request !ping command
More info Here! (http://board.univ-angers.fr/thread.php?threadid=4812&boardid=28&styleid=1&sid=ec8e1472916f4d6366ca75c4664884dc)

Thanks
Title:
Post by: Pothead on 19 June, 2005, 22:06:37
QuoteOriginally posted by Star
Hmm.. why chould it know what font users have. This way is useful independent witch font users have.
You seem to miss the point.  Type sommit in Times New Roman, and get the spacing all perfect.  Then change the font type to Courrier.
Title:
Post by: Star on 19 June, 2005, 23:06:56
QuoteOriginally posted by Pothead
You seem to miss the point.  Type sommit in Times New Roman, and get the spacing all perfect.  Then change the font type to Courrier.

As it is now yes.
And thats why I wants this future.
Title:
Post by: bastya_elvtars on 19 June, 2005, 23:50:57
QuoteOriginally posted by Star
PPK: Request !ping command
More info Here! (http://board.univ-angers.fr/thread.php?threadid=4812&boardid=28&styleid=1&sid=ec8e1472916f4d6366ca75c4664884dc)

Thanks

If you !ping, you cannot make sure that host is down, he might have disabled outgoing ICMP echo replies, OR disabled incoming ICMP echo requests.

-- // edit

Either way, it is NOT down, just you cannot ping it. Also goes for traceroute, only thing is to nmap the host, but that's a risky thing, because nmap does portscans that many firewalls ban. Only way to detect that host is up (as you want hubserver as up) to send a SYN flagged packet to his hub port. If the port seems open, the hubsoft is up, which is the important part for you. :)
Title:
Post by: Star on 20 June, 2005, 23:01:02
bastya_elvtars: I was more thinking to show the speed from the hub to the user in the !ping command


PKK: Request a !showscript command that list the scripts and if they are on or off.

And it whould be nice to number the scripts. And then u can just use !startscript and so on...

Thanks //Star
Title:
Post by: PPK on 21 June, 2005, 01:50:06
QuoteOriginally posted by Star
- Make the "Minimize om startup" work
If you have idea how to do it... ShowWindow with SW_HIDE (used and working on normal minimize in PtokaX and (CZ)DC++) not working here :(
QuoteOriginally posted by Star
- Could u add a CLS button in ScriptEditor window?
Added :)
QuoteOriginally posted by Star
- Is it posseble to change the "Restart Scripts" button to a "Restart Scripts/TXT" button
Yes it is, but i make it in better way :D
QuoteOriginally posted by Star
- Add so the hubname is updated to the users when u change the hubname with a command. (I use RoboCop command)
Fixed week ago, bastya_elvtars report it before you ;)
QuoteOriginally posted by Star
- Add multi host. Like "2nd ports"
I don't understand...
QuoteOriginally posted by Star
- Add a Stat Window that showes the same info that !stats do
If i find good and fast (no cpu usage for this  :D) way to do it then i add it :]
Title:
Post by: Star on 21 June, 2005, 09:43:46
Thanks for all the help PKK!

QuoteI don't understand...
Add a 2:nd Hub Address square.
Where u can type the 2:nd host or several hosts.

Like it is in 2:nd Port square

Thanks //Star
Title:
Post by: bastya_elvtars on 21 June, 2005, 12:20:33
It is not needed as the hostname is always resolved and connection is made to IP. The first hosntname is only resolved for making sure there is proper net connection and the hostname is really available. You can assign many hostnames to a sigle IP.
Title:
Post by: PPK on 21 June, 2005, 14:20:16
QuoteOriginally posted by Star
Where u can type the 2:nd host or several hosts.
And what you want to do it with this ??? PtokaX get ip from first hostname and other ignore :P
Title:
Post by: Star on 21 June, 2005, 14:36:43
So I can use several hosts and check the "listen only to this address"

But I maybe just missunderstand the purpose of this checkbox?

Thanks //Star
Title:
Post by: PPK on 21 June, 2005, 15:37:12
QuoteOriginally posted by Star
So I can use several hosts and check the "listen only to this address"
Yes but listen is set to IP address.. do you really have more hosts with more IPs ?(
Title:
Post by: Star on 21 June, 2005, 16:09:35
Ok.. then I don't need this thing!

So if I just write my main host in PX and then chack the box "listen only on this address" I can connect to the hub with other addresses that point to the same IP. Right?
Title:
Post by: Dessamator on 21 June, 2005, 16:55:39
QuoteOriginally posted by Star
Ok.. then I don't need this thing!

So if I just write my main host in PX and then chack the box "listen only on this address" I can connect to the hub with other addresses that point to the same IP. Right?
yep
Title:
Post by: GeceBekcisi on 21 June, 2005, 17:15:58
QuoteOriginally posted by PPK at 21.06.2005, 01:50
QuoteOriginally posted by Star at 19.06.2005, 20:34
- Add a Stat Window that showes the same info that !stats do
If i find good and fast (no cpu usage for this ) way to do it then i add it
QuoteOriginally posted by Star at 19.06.2005, 21:11
Ok. Maybe a button to update the info then. And not AutoUpdate it. This sholdn't take any CPU without auto-update
I think he's talking about a "good and fast" way for stats windows; a manual update button might be useful?
Title:
Post by: PPK on 21 June, 2005, 19:51:51
QuoteOriginally posted by Star
command that list the scripts and if they are on or off.
Added :]
Title:
Post by: BeeR on 21 June, 2005, 20:23:57
Hi PPK

any chance you add prefix/ip checks into Ptokax ??
Title:
Post by: PPK on 21 June, 2005, 20:59:54
QuoteOriginally posted by BeeR
any chance you add prefix/ip checks into Ptokax ??
No, for special things like this have PtokaX scripting :))
Title:
Post by: Corayzon on 23 June, 2005, 06:47:40
Hey PPK,

Can u make !startscript return an error message back if the script has an error starting?

Something like:

*** Error starting script Script.lua: [14:46] Syntax ...ocuments and Settings\Corayzon\Desktop\Perfect cSlave\scripts\Script.lua:1: unexpected symbol near `1'

Cheers
Title:
Post by: bastya_elvtars on 23 June, 2005, 14:37:12
That can be done through loadfile, as it returns the error AFAIK.

Code Select
local _,err=loadfile("script.lua") if err then print(err) end
Just a tiny ex.
Title:
Post by: Star on 23 June, 2005, 21:23:37
QuoteOriginally posted by Corayzon
Can u make !startscript return an error message back if the script has an error starting?
Whould be nice. If PKK gonna add it, add it to !restartscript(s) to.

Thanks /Star
Title:
Post by: bastya_elvtars on 23 June, 2005, 21:26:06
QuoteOriginally posted by Star
QuoteOriginally posted by Corayzon
Can u make !startscript return an error message back if the script has an error starting?
Whould be nice. If PKK gonna add it, add it to !restartscript(s) to.

Thanks /Star

It is in the native LUA API.
Title:
Post by: Star on 24 June, 2005, 22:45:32
Ok Thanks!
Title:
Post by: dragos_sto on 25 June, 2005, 03:55:33
syntax SendToAll(Nick, Data) dont work in function
ChatArrival(User, Data)
Title:
Post by: Madman on 25 June, 2005, 13:56:01
QuoteOriginally posted by dragos_sto
syntax SendToAll(Nick, Data) dont work in function
ChatArrival(User, Data)

uh, yes it does..
U must make some errror in your code...
Title:
Post by: Star on 25 June, 2005, 19:19:46
An other request.
A more advanced MOTD that can show usernames, ip etc as standard in px whould be nice...

like this: %[user] %[ip] %[Hubadress]... and so on...

Thanks //Star
Title:
Post by: wegface on 25 June, 2005, 19:51:43
QuoteA more advanced MOTD that can show usernames, ip etc as standard in px whould be nice...

but this can be done with a script.
The point of ptokax is to be efficient as standard- and it does this very well. Then each hub owner can degrade this efficiency with scripting to his or her liking. :)) heheheee.
Title:
Post by: Star on 25 June, 2005, 20:38:59
QuoteOriginally posted by wegface
but this can be done with a script.
The point of ptokax is to be efficient as standard- and it does this very well. Then each hub owner can degrade this efficiency with scripting to his or her liking. :)) heheheee.
Yes I know. But I think this is a pritty Basic thing.
Title:
Post by: Dessamator on 25 June, 2005, 21:20:34
whats the advantage of having it in ptokax?, and not having it in a script?
Title:
Post by: Star on 25 June, 2005, 21:39:09
It's more simple to have it in PtokaX and not in a script. And it's reduce the scripts. I think this is a basic thing that should be in PX as standard.. But thats just my opinion.

Thanks //Star
Title:
Post by: BeeR on 25 June, 2005, 21:49:08
QuoteOriginally posted by Star
It's more simple to have it in PtokaX and not in a script. And it's reduce the scripts. I think this is a basic thing that should be in PX as standard.. But thats just my opinion.

Thanks //Star

An idea !!

Why not have 2 versions of Ptokax ??

1 for thoose that dont want to have many scripts - allmost a hub in a box ,,

1 for thoose that wants to use more scripts - Ptokax is what it is today ,,

me want the first version [[=
Title:
Post by: Dessamator on 25 June, 2005, 22:13:15
QuoteOriginally posted by BeeR
QuoteOriginally posted by Star
It's more simple to have it in PtokaX and not in a script. And it's reduce the scripts. I think this is a basic thing that should be in PX as standard.. But thats just my opinion.

Thanks //Star

An idea !!

Why not have 2 versions of Ptokax ??

1 for thoose that dont want to have many scripts - allmost a hub in a box ,,

1 for thoose that wants to use more scripts - Ptokax is what it is today ,,

me want the first version [[=

 ptokax in a box u say, just who is going to select the boxed goodies, will there be voting?, and having boxed goodies makes it less likely to have mods based on the current goodie, furthermore there is more chance of bugs, and harder to debug since its compiled !
Title:
Post by: BeeR on 25 June, 2005, 22:25:02
ptokax in a box u say, just who is going to select the boxed goodies, will there be voting?, and having boxed goodies makes it less likely to have mods based on the current goodie, furthermore there is more chance of bugs, and harder to debug since its compiled !

========================================

start a new thread and lets see what people want in *Ptokax-in-a-box* :)
Title:
Post by: wegface on 25 June, 2005, 22:43:34
Anyone wanting "Hub in a box" well that was the whole point of ynhub. So why you not using that then?
 ;)
Title:
Post by: Star on 25 June, 2005, 23:05:53
PPK: If I reboot the PC with PtokaX running. It don't save motd or the settings that where changed after PtokaX exits normaly the last time.

Thanks //Star
Title:
Post by: Pothead on 25 June, 2005, 23:59:51
QuoteOriginally posted by Star
If I reboot the PC with PtokaX running. It don't save motd or the settings that where changed
You need to press Stop Hub to save changes to settings. A save settings button would be nice. ;)
Title:
Post by: Star on 26 June, 2005, 00:41:58
QuoteOriginally posted by Pothead
You need to press Stop Hub to save changes to settings.
Doh! ;)
QuoteA save settings button would be nice. ;)
Even better that PtokaX saves the settings if Windows force to exit the program... like it do on reboot.
Title:
Post by: BeeR on 26 June, 2005, 02:05:20
QuoteOriginally posted by wegface
Anyone wanting "Hub in a box" well that was the whole point of ynhub. So why you not using that then?
 ;)

wegface
i guess u have some problem with your eyes

read 1 more time and u see that my idea is to have
both Ptokax scriptable - ynhub cannot handle LUA (thank god for that)

And it was an idea - not a request !!
Title:
Post by: PPK on 26 June, 2005, 03:36:45
QuoteOriginally posted by BeeR
1 for thoose that dont want to have many scripts - allmost a hub in a box
Is easy to create version like this :D Merge all usefull scripts to one and pack it with PtokaX :]
Title:
Post by: Star on 26 June, 2005, 09:06:24
PPK: So I guess u don't like it either? The motd thing. Please give me respond.
And about the save settings on WinExit to.

Thanks //Star
Title:
Post by: wegface on 26 June, 2005, 10:58:33
PPK is right. Although this would still be a script so not really "hub in a box"- just hub with a script included in package.
Still i dont see the point myself. Just as easy to search this forum for scripts that are required. This makes nearly every hub different- have its own character. Who wants to all have the same? Oh yeah ynhub users heheheee.
Oh and Beer----- maybe i have a problem with my eyes- maybe im blind. Or partially sighted, or elderly. :)
Or stoned. Or all of the above.




 ;)
Title:
Post by: Ubikk on 26 June, 2005, 12:49:14
Any ideas on when ill the new version of Px will be available?  :D
Title:
Post by: ??????Hawk?????? on 26 June, 2005, 14:04:17
QuoteOriginally posted by Star
PPK: So I guess u don't like it either? The motd thing. Please give me respond.
And about the save settings on WinExit to.

Thanks //Star

It is BAD practise to close windows That way.

Close all your apps first, that way you wont suffer any loss..


QuoteOriginally posted by BeeR
1 for thoose that dont want to have many scripts - allmost a hub in a box ,,
you dont think he has enough to do with the 1 version ??

i dont think you realise the ammount of Work involved.


If you want a hub in a box then go with what wegface posted.

Ptokax is great as it is and gets better with each release, The Deflood Section was a great addition BUT anything else should be left to Scripts..


??????Hawk??????
Title:
Post by: PPK on 26 June, 2005, 17:59:27
QuoteOriginally posted by Star
The motd thing. Please give me respond.
And about the save settings on WinExit to.
Is easy, I DON'T KNOW HOW TO DO IT  :P
Title:
Post by: Star on 26 June, 2005, 22:37:28
QuoteOriginally posted by PPK Is easy, I DON'T KNOW HOW TO DO IT  :P
Well.. Ok ... Thanks anyway
Title:
Post by: Pothead on 27 June, 2005, 01:20:41
QuoteOriginally posted by PPK
Is easy, I DON'T KNOW HOW TO DO IT  :P
What language is PtokaX written in.  Here is an nice example of how to detect System shutdown (in dephi).  The windows side princables will still be the same. :)
http://bdn.borland.com/article/0,1410,16357,00.html
Title:
Post by: PPK on 27 June, 2005, 03:18:45
Yes i found it in PtokaX source too
Quote// This is for testing if Windows is Shutting down
// frontline3k on 9 oct 2002
AppendLog("Serving stopped (Windows shutdown)");
// On windows shutdown, I can close the window, without asking
but save for unknown reason missing  ?(
Save of banlist/reglist/settings/MOTD added :]
Title:
Post by: Corayzon on 27 June, 2005, 16:02:14
Can you add some lua script functions like:

frmHub:SaveBanlist
frmHub:SaveReglist
frmHub:SaveSettings
frmHub:SaveMOTD

and

 *** Edit ***

frmHub:LoadBanlist
frmHub:LoadReglist
frmHub:LoadSettings
frmHub:LoadMOTD

?
Title:
Post by: Dessamator on 27 June, 2005, 16:49:31
arent the banlist, and reglist, saved automatically after being changed?
and whats formloadblahblah ??, loading a lua file?, a normal file or loading the previously saved settings?

as for the rest of ur requests, they might be usefull
Title:
Post by: Corayzon on 28 June, 2005, 03:18:21
QuoteOriginally posted by Dessamator
arent the banlist, and reglist, saved automatically after being changed?
and whats formloadblahblah ??, loading a lua file?, a normal file or loading the previously saved settings?

as for the rest of ur requests, they might be usefull

Edited last post ... just couldnt be f'd writing it out.

And for my request, yea i agree, to bad someone snobs them all and doesnt even reply unless i bug them heaps :/
Title: User database
Post by: ruspant on 29 June, 2005, 16:52:09
Hi guys, have you got any news about user log database ?  ( !userinfo, !ipinfo, ecc...)
Title:
Post by: dragos_sto on 29 June, 2005, 22:57:08
they are few scripts who make an userinfo or ipinfo log
Title:
Post by: dragos_sto on 30 June, 2005, 01:30:09
it possible to make ptokax a windows service ,
in his options to become a service
Title:
Post by: Corayzon on 01 July, 2005, 19:15:14
PPK,

Stuff my last request for saving and loading functions in the lua scripts...
Just add a lua script function frmHub:Quit() that closes ptokax properly so i dont have
to use io.exit(). Because io.exit() doesnt call the Ptokax thread to close. It kills the process ( Meaning nothing is saved =[ ) :/
Title:
Post by: Star on 02 July, 2005, 11:31:10
Hi PPK. just a tiny thing.
When I write a space before the hub name in PX... the space is not being saved on exit. And a have a space before my hubname. Can u fix this, whould be nice?

//Thanks Star

Edit: And how do I make this go away? "Type !help to see the available commands for your profile." Maybe a on/off option for this in PX?
Edit2: !+-/* This is the default prefixes in PX.. but the * prefix not working.
Title:
Post by: Scanning on 02 July, 2005, 12:24:43
Close hub, edit name in ptokax.ini, save, start hub, problem solved ?
Title:
Post by: Dessamator on 02 July, 2005, 13:39:02
QuoteOriginally posted by Star
Hi PPK. just a tiny thing.
When I write a space before the hub name in PX... the space is not being saved on exit. And a have a space before my hubname. Can u fix this, whould be nice?

//Thanks Star

Edit: And how do I make this go away? "Type !help to see the available commands for your profile." Maybe a on/off option for this in PX?
Edit2: !+-/* This is the default prefixes in PX.. but the * prefix not working.

for "B", thats not a ptokax thing, thats part of whatever script ur using, for "B2" it works fine here !
Title:
Post by: Ubikk on 02 July, 2005, 16:36:05
Could you also fix this .. ?  ;)

Quote
[17:34:45] Hub is unable to process your login, try later.
[17:34:46] Hub is unable to process your login, try later.
[17:34:47] Hub is unable to process your login, try later.
[/size]

This error is extremly annoying.
I've set the maximum connections from same IP to 500/1 sec but it still gives me the error.
Everyone on my little hub (avg 40-60 users) is very annoyied and I'm starting to lose them because of this...
Any suggestions on what can I do?  :rolleyes:
Title:
Post by: Pothead on 02 July, 2005, 19:31:59
QuoteOriginally posted by Star
- Perfect columns in lua if posseble
Some function to make perfect columns in scripts. Useful in lists etc
Just an idea, but try using tabs ( \t ) to sort out your spacing. ;)
Title:
Post by: PPK on 02 July, 2005, 22:43:00
QuoteOriginally posted by Star
Edit: And how do I make this go away? "Type !help to see the available commands for your profile." Maybe a on/off option for this in PX?
Where you have this ?( I don't find this message in PtokaX source, maybe script ? :))
QuoteOriginally posted by Star
Edit2: !+-/* This is the default prefixes in PX.. but the * prefix not working.
Working here without problems, maybe script blocking it ?(
QuoteOriginally posted by Ubikk
Could you also fix this .. ?  ;)

Quote
[17:34:45] Hub is unable to process your login, try later.
[17:34:46] Hub is unable to process your login, try later.
[17:34:47] Hub is unable to process your login, try later.

This error is extremly annoying.
For this is MaxLogins setting in lua.ini (from lua SetMaxLogins(number)).
Title:
Post by: Star on 03 July, 2005, 01:16:45
QuoteOriginally posted by PPK
Where you have this ?( I don't find this message in PtokaX source, maybe script ? :))
Sorry m8.. my falt.. I thougt I desabled RoboCop when I test it... so it's not in PX

And for the * in the commands... it seems to be some script that blocks it yes... works fine if I disable all scripts... Thanks anyway :)

QuoteOriginally posted by Pothead
Just an idea, but try using tabs ( \t ) to sort out your spacing. ;)
U dont understand what I meen. ;)
Title:
Post by: Ubikk on 03 July, 2005, 10:42:39
QuoteOriginally posted by Mutor
Quote"Type !help to see the available commands for your profile."
is generated by RoboCop as is..
Quote[17:34:45] Hub is unable to process your login, try later.
You may want to check your RoboCop settings those that might cause that error, such as 'Modes' on the profile tab of RC.

I dont use Robocop.. The only security script i use is Guarding 0.3.1

P.S: MaxLogins is set to 500
Title:
Post by: Star on 08 July, 2005, 19:19:58
What do u people think about a !restartpc command?

//Star
Title:
Post by: blackwings on 09 July, 2005, 03:15:28
QuoteOriginally posted by Star
What do u people think about a !restartpc command?

//Star
I think it is a bad Idea, it can be explioted :rolleyes:
Title:
Post by: Dessamator on 09 July, 2005, 12:27:49
indeed i agree with u blackwings, just use vnc or some other app. to restart it
Title: text file support (request)
Post by: UwV on 09 July, 2005, 12:46:43
I was just wondering if it would be too much trouble to make an extra option/checkbox "send to all"  to show the textfiles to all users and not only to the user using the command ....

would be  8)  imo ..

yea sure, i can use a script i know,.. but since it is in there, it would be nice...
Title:
Post by: dragos_sto on 09 July, 2005, 13:03:51
i return whit my question
it possible to make ptokax an integrate
service of windows ...
i found one solution ,here (http://www.codeproject.com/system/xyntservice.asp)
but some time have errors
:((
Title:
Post by: blackwings on 09 July, 2005, 13:07:04
QuoteOriginally posted by dragos_sto
i return whit my question
it possible to make ptokax an integrate
service of windows ...
i found one solution ,here (http://www.codeproject.com/system/xyntservice.asp)
but some time have errors
:((
why do you want to run ptokax as a service?
Title:
Post by: dragos_sto on 09 July, 2005, 13:14:26
one example
2000 server or 2003 server
not always i whant to login
becaus im not always on my computer and i don like
someone else to make bugs :)
Title: Profile Manager : Enter hub if IP banned
Post by: UwV on 09 July, 2005, 13:38:50
seems that if user's ip is in the tempbanlist for connectionflooding..
user  does not pass the IP ban .. (with user's profile checkbox to allow)
Title:
Post by: Psycho_Chihuahua on 09 July, 2005, 14:30:26
QuoteOriginally posted by dragos_sto
one example
2000 server or 2003 server
not always i whant to login
becaus im not always on my computer and i don like
someone else to make bugs :)

well then use the remote desktop from your computer to start stop the hub on the server...

Otherwise there r also aome tools around to make your own windows services and with one of them (i'm not sure which one though) you can also start ptokax as a service
Title:
Post by: DEEP-GOA on 09 July, 2005, 14:41:57
QuoteOriginally posted by UwV
I was just wondering if it would be too much trouble to make an extra option/checkbox "send to all"  to show the textfiles to all users and not only to the user using the command ....

would be  8)  imo ..

yea sure, i can use a script i know,.. but since it is in there, it would be nice...

agree,, would be nice,, i hope is possible,,
Title:
Post by: dragos_sto on 09 July, 2005, 14:48:29
true , but it if possible to make ptokax a service
whil be more stable in my opinion

a command to restart pc from ptokax ,
it not necessary in my opinion becaus when make a
server ... everybody whant to have a bigest up time
and to minimize the possibilitiy to someone else
to restart his server
Title:
Post by: Dessamator on 09 July, 2005, 15:28:19
indeed, we'll just have to wait and see, ptokax to run as a service would be nice, and so would socket support .
Title:
Post by: Dessamator on 09 July, 2005, 18:47:08
indeed it was, either way, nothing we can do about it, only the developers can !
Title:
Post by: Star on 09 July, 2005, 20:43:03
Options > Hub Bot > "Register on hub" and "Use as Hub-Security alias" don't save on hub exit or restart...

And I tested to kick myself and get tempban... but i can't get in even if "Enter hub if IP banned" is on.

Thanks //Star
Title:
Post by: BeeR on 10 July, 2005, 00:00:13
QuoteOriginally posted by Star
Options > Hub Bot > "Register on hub" and "Use as Hub-Security alias" don't save on hub exit or restart...

And I tested to kick myself and get tempban... but i can't get in even if "Enter hub if IP banned" is on.

Thanks //Star

It should be blocked by Ptokax that keyusers cannot be kicked/banned
as long they are regged ,, if u delreg - then its ok to boot them
Title:
Post by: PPK on 10 July, 2005, 00:21:28
QuoteOriginally posted by Star
Options > Hub Bot > "Register on hub" and "Use as Hub-Security alias" don't save on hub exit or restart...
Is saved here...
QuoteOriginally posted by Star
And I tested to kick myself and get tempban... but i can't get in even if "Enter hub if IP banned" is on.
Myself = you trying to login with this banned nick ??? If yes then read it better "Enter hub if IP banned" :P
Title:
Post by: Star on 10 July, 2005, 08:25:00
QuoteOriginally posted by PPK
Is saved here...
Sorry.. forgot to deactivade RoboCop again ;)

QuoteMyself = you trying to login with this banned nick ??? If yes then read it better "Enter hub if IP banned" :P
And sorry again.. when i login with an other nick it works..

Thanks //Star
Title:
Post by: dragos_sto on 12 July, 2005, 16:27:58
one little bug
in function NewUserConnected(User)
when one operator connect it seen at reg user
not to be operator
Title:
Post by: Jerry on 13 July, 2005, 01:41:36
QuoteOriginally posted by dragos_sto
one little bug
in function NewUserConnected(User)
when one operator connect it seen at reg user
not to be operator
Try: OpConnected(User) function for this ;)
Title:
Post by: Jerry on 13 July, 2005, 02:31:06
QuoteOriginally posted by Mutor
Or the ever popular function saving shortcut
Code Select
OpConnected = NewUserConnected....when appropriate

Yes, or this way.  :D   :))   :]
Title:
Post by: dragos_sto on 13 July, 2005, 18:29:31
i deed this OpConnected = NewUserConnected
but when i use curUser.iOpHubs it not seen to be an
operator
Title:
Post by: uffetjur on 13 July, 2005, 23:27:07
Back from holiday, very nice to se that my hubs still running after 3 weeks!!!


------------------------------------------------------------
Current stats:
------------------------------------------------------------
Version: PtokaX DC Hub 0.3.3.1 [debug] built on Jun 10 2005 01:35:21
Uptime: 21 days, 18 hours, 11 minutes
Users (Max/Actual Peak (Max Peak)/Logged) : 1000 / 391 (391) / 322
Chat messages: 13983 x
Unknown commands: 0 x
PM commands: 14700 x
Key commands: 150207 x
Supports commands: 147703 x
MyINFO commands: 85010 x
ValidateNick commands: 148752 x
GetINFO commands: 0 x
Password commands: 30326 x
Version commands: 30179 x
UserIP commands: 20020 x
GetNickList commands: 30343 x
Search commands: 2434573 x
SR commands: 1715114 x
CTM commands: 99500443 x
RevCTM commands: 20266963 x
BotINFO commands: 149 x
------------------------------------------------------------
CPU usage (60 sec avg): 3.37%
CPU time: 10:17:30
Mem usage (Old style): 2306 kB
Mem usage (Peak): 7.22 MB (30.30 MB)
VM size (Peak): 11.44 MB (32.81 MB)
------------------------------------------------------------
SendRests (Peak): 0 (0)
RecvRests (Peak): 0 (6)
Data sent: 62.47 GB
Data received: 6.71 GB
Tx (60 sec avg): 48.76 kB/s (42.86 kB/s)
Rx (60 sec avg): 2.85 kB/s (4.16 kB/s)
Title:
Post by: exlepra on 29 July, 2005, 13:56:40
Hi guys, dcdm opchat commands doesnt seem to work with 0.3.3.1 (ie -help -info -reportspeed etc, sent to opchat) , If I switch back to  0.3.3.0 17.09 they are working again.
Title:
Post by: PPK on 29 July, 2005, 15:51:55
PtokaX have nothing to do with DCDM and not have any support for DCDM commands... :rolleyes:
Title:
Post by: Pothead on 29 July, 2005, 16:07:47
This isn't a problem with either.  PtokaX has stopped wasting bandwidth on sending you stuff which you send to it.
Using 0.3.3.1 and typing one of them commands i see a message from every OP who's client supports them, except my own.
Title:
Post by: exlepra on 29 July, 2005, 16:31:36
I know ptokax has nothing to do with dcdm commands, but something had to be changed, because with older versions the dcdm client listens/reacts properly to the commands entered to opchat while with 0.3.3.1 nothing happens.

But I think I found a strange thing which could be leading to find the problem:
I started a hub on local pc, and made a few op accounts, logged in to the hub with 2 clients as op, and what a surprise in the opchat every client only sees their own message in the opchat but nothing from the other typing, back to 0.3.3.0 and opchat works like before.

In my hub the dcdm client is on the same machine as the hubsoft, for a test logged in with the dcdm client from another ip and it is working.

So lets forget about the dcdm, it looks like 0.3.3.1 doesnt "like" the clients  from the same PC/IP where the hubsoft is.

Title:
Post by: exlepra on 29 July, 2005, 16:54:56
LOL guys, sorry for being lamer :)

changelog:
Added: Checkbox to profile manager to enable OpChat per profiles.


A few checkboxes had to be clicked and problem solved :)

Though it was funny that the we didnt realize the opchat wasnt working, perhaps it was due to that ops usually use the vipchat  and very seldom talk on opchat .
Title:
Post by: dragos_sto on 31 July, 2005, 12:27:11
some little problem whit ptokax
when user whit no nick whant to connect
i kant disconnect him in function MyINFOArrival(User, Data) , but when try to send a messege to tale him it a stupid ... whitout nick name
the messege it not receive

i try whit command SendToNick(Nick, Data)
Text only | Text with Images