PtokaX 0.3.3.0 build 17.09 released... - Page 2
 

News:

29 December 2022 - PtokaX 0.5.3.0 (20th anniversary edition) released...
11 April 2017 - PtokaX 0.5.2.2 released...
8 April 2015 Anti child and anti pedo pr0n scripts are not allowed anymore on this board!
28 September 2015 - PtokaX 0.5.2.1 for Windows 10 IoT released...
3 September 2015 - PtokaX 0.5.2.1 released...
16 August 2015 - PtokaX 0.5.2.0 released...
1 August 2015 - Crowdfunding for ADC protocol support in PtokaX ended. Clearly nobody want ADC support...
30 June 2015 - PtokaX 0.5.1.0 released...
30 April 2015 Crowdfunding for ADC protocol support in PtokaX
26 April 2015 New support hub!
20 February 2015 - PtokaX 0.5.0.3 released...
13 April 2014 - PtokaX 0.5.0.2 released...
23 March 2014 - PtokaX testing version 0.5.0.1 build 454 is available.
04 March 2014 - PtokaX.org sites were temporary down because of DDOS attacks and issues with hosting service provider.

Main Menu

PtokaX 0.3.3.0 build 17.09 released...

Started by PPK, 30 May, 2005, 01:00:07

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Madman

Feature Request
An option to redirect users if there nick contain forbidden chars...now it' just disconnets
We suffer in silence, we lurk in the shadows, we kill in the night
Site currently down, ETA of returning online is 2099 ;p

ruspant

I've got to switch back to 17.08 cause 17.09 disconnects RMDC ...
Just copied all settings from .08 to .09 ...
Will wait for any hints from you
thx

Pothead

QuoteOriginally posted by ruspant
I've got to switch back to 17.08 cause 17.09 disconnects RMDC ...
Nice  ;)

PPK

QuoteOriginally posted by ruspant
Will wait for any hints from you
Get rmDC++ source and fix bugs in DC protocol support :D
"Most of you are familiar with the virtues of a programmer. There are three, of course: laziness, impatience, and hubris." - Larry Wall

ruspant

Thx PPK for your propmt answer.
Sadly I'm not so skilled in C programming, but I've sent and advice to RMDC developers.
Hope they'll fix soon so my users will stop crying  :D

PPK

QuoteOriginally posted by ruspant
Hope they'll fix soon so my users will stop crying  :D
No they start crying more... rmDC++ is dead :D
"Most of you are familiar with the virtues of a programmer. There are three, of course: laziness, impatience, and hubris." - Larry Wall

Pothead

QuoteOriginally posted by PPK
QuoteOriginally posted by ruspant
Hope they'll fix soon so my users will stop crying  :D
No they start crying more... rmDC++ is dead :D
And since that GPL breaking pile of s**t never had it's source released, nobody is gonna be able to fix it for you either.

bastya_elvtars

QuoteOriginally posted by Pothead
And since that GPL breaking pile of s**t never had it's source released, nobody is gonna be able to fix it for you either.

However it's nice because it's a mix of .PhantomDC and StrongDC, if somebody made a client like that it wold be good... however Strong is now bloated like hell, phants is dead. :(
Everything could have been anything else and it would have just as much meaning.

chettedeboeuf

Why do not have a 'Save' button for Ptokax settings ?

BeeR

HI PPK

a small request

can u add in deflood - redirect as an option ??
its the only choice missing ,,

Best regards
A cold BeeR is stunning !!

Event_Horizon

QuoteOriginally posted by BeeR
HI PPK

a small request

can u add in deflood - redirect as an option ??
its the only choice missing ,,

Best regards

awesome idea  :))

i'm with you  :D
Greez ????_H???z??
??????????????????

??/v\\ \'?\' ?@?? ???? is Secured by RoboCop? Created by Optimus?

ConejoDelMal

Another small request...

The OpChat in Ptokax isnt visible to all users, but when you give !op to a user, he continues not to see it, and the messages are sent in main chat, like:

[17:45:04] Private message from -=OpChat=-: <[AT]conejodelmal> test

Is it possible that Temp Op's also have acess to the bot? that would be great, but if not, that it stays visible to all users?
Rede-DC Comunidade Portuguesa de DC

PPK

QuoteOriginally posted by [AT]conejodelmal
Another small request...
It is not request, it is bug report :D i fix it  ;)
"Most of you are familiar with the virtues of a programmer. There are three, of course: laziness, impatience, and hubris." - Larry Wall

ConejoDelMal

lol.... ok.. i thought it was made on pourpose  :P

thx a lot
Rede-DC Comunidade Portuguesa de DC

Nada@WTB

QuoteOriginally posted by PPK
QuoteOriginally posted by [AT]conejodelmal
Another small request...
It is not request, it is bug report :D i fix it  ;)


OpChat is also not visible to an OP if they have keys not showing in the profile settings
Welcome Thieving Bastards
PtokaX 0.4.1.1
Leviathan v.4.1
ApexDC++ 1.2.1
Windows 7 Ultimate

PPK

QuoteOriginally posted by Nada@WTB
OpChat is also not visible to an OP if they have keys not showing in the profile settings
Maybe small checkbox for profile, to allow opchat  ?(  :]
"Most of you are familiar with the virtues of a programmer. There are three, of course: laziness, impatience, and hubris." - Larry Wall

damo


Anna

:) sounds like a good idea to me :D that way kvips, wicth I dont want to be shown with key can be set to allow opchat :D

ruspant

Hi guys,
since the new versions are out I've got some problems with raw sent by menu commands.

If I use a raw like this

"$UserCommand 1 3 ? Help $<%[mynick]> !help ||"

the menu works only if used on main user list.

When I try to use the menu item while inside a PM, the hub disconnects me,

I've tried to intercept the data arrival (chat/to) with a small script but it seems the hub disconnects me before any data is sent to lua....

This kind of syntax was perfectly legal with the "old" ptokax so where's the problem ?

PPK

I test it with
$UserCommand 1 3 Help$<%[mynick]> !help|
in script it looks like
curUser:SendData("$UserCommand 1 3 Help$<%[mynick]> !help|")
and working without problems in pm too (in all cases is sent same command)... bug in client ???
"Most of you are familiar with the virtues of a programmer. There are three, of course: laziness, impatience, and hubris." - Larry Wall

GeceBekcisi

#45
Feature request(s):

Ban list should be extended with banning op's nick, ban reason and whois info (so we can determine to delete dynamic ip ranges after a week and leave static ones with ISPs giving dsl.dynamicXXXXX.XXX.net or dsl.staticXXXXXX.XXX.net like whois results).

Best Regards.
Do you need an advanced user handling script? Download UserBekcisi today (Latest Edit)
Features: User + ISP + GeoIP database, user info + share checking and many more...

Alexandros

Feature request:

-> doble click in script name opens it in "Edit script" frame.

->reason of the ban in "Permanent bans"

->"No autoscroll" buton in debug tab

->Multiselect and SUPR key allowed in "permanent bans" (it will made a lot easy to clean that list...now i have to click in a line then click remove..)

thanks again!

Alex

PPK

QuoteOriginally posted by Alexandros
-> doble click in script name opens it in "Edit script" frame.
Done.
QuoteOriginally posted by Alexandros
->reason of the ban in "Permanent bans"
Will be here with new banlist (same for request from GeceBekcisi).
QuoteOriginally posted by Alexandros
->"No autoscroll" buton in debug tab
Debug tab ?( If you mean Users / Chat then i don't know how to disable it :(
QuoteOriginally posted by Alexandros
->Multiselect and SUPR key allowed in "permanent bans"
I don't know how to do it...
"Most of you are familiar with the virtues of a programmer. There are three, of course: laziness, impatience, and hubris." - Larry Wall

Nada@WTB

QuoteOriginally posted by PPK
QuoteOriginally posted by Nada@WTB
OpChat is also not visible to an OP if they have keys not showing in the profile settings
Maybe small checkbox for profile, to allow opchat  ?(  :]



excellent :D
Welcome Thieving Bastards
PtokaX 0.4.1.1
Leviathan v.4.1
ApexDC++ 1.2.1
Windows 7 Ultimate

Alexandros

#49
Quote->"No autoscroll" buton in debug tab
Debug tab ?( If you mean Users / Chat then i don't know how to disable it :(
yes, that tab

thanks for all the good work! =)

SMF spam blocked by CleanTalk