? Guarding ?

[kepp]

Originally posted by EMIN3M
Ohh kool nice work, glad you worked out the problem :)

Do you know if there will be a fix for Fun script?

Thanx EMIN3M :)

yea, According to madman there will be!
though it's not really a hurry, it seems to be the client im using only, and maybe some version lower than this that im not aware of

[Hoke]

I have some trouble in client checks, if DCDM (0,045) is denied i can go in hub whitout eny other checks when i am user and
if i am VIP then it disconnects me but no fail messages come through

but if I "!follow" I see what is wrong and it reports even that "user" been disconnected but user stays in hub ( no chare/ slot checks)

and yes i tryed this hub connection (adsl) and other connection (cable) so it is not that.
clien maby ? just tryed same DC++ client and all worked ok

all other things seams to be ok

have anybody else this same ?

ps. PtokaX is 17,05 and 17,08
 Guarding V: 0.2.2 and V: 0.2.8

[kepp]

Originally posted by Hoke
I have some trouble in client checks, if DCDM (0,045) is denied i can go in hub whitout eny other checks when i am user and
if i am VIP then it disconnects me but no fail messages come through

but if I "!follow" I see what is wrong and it reports even that "user" been disconnected but user stays in hub ( no chare/ slot checks)

and yes i tryed this hub connection (adsl) and other connection (cable) so it is not that.
clien maby ? just tryed same DC++ client and all worked ok

all other things seams to be ok

have anybody else this same ?

ps. PtokaX is 17,05 and 17,08
 Guarding V: 0.2.2 and V: 0.2.8

Im getting confused here, could you perhaps explain this
a little better? sorry

[Hoke]

Originally posted by kepp

Originally posted by Hoke
I have some trouble in client checks, if DCDM (0,045) is denied i can go in hub whitout eny other checks when i am user and
if i am VIP then it disconnects me but no fail messages come through

but if I "!follow" I see what is wrong and it reports even that "user" been disconnected but user stays in hub ( no chare/ slot checks)

and yes i tryed this hub connection (adsl) and other connection (cable) so it is not that.
clien maby ? just tryed same DC++ client and all worked ok

all other things seams to be ok

have anybody else this same ?

ps. PtokaX is 17,05 and 17,08
 Guarding V: 0.2.2 and V: 0.2.8

Im getting confused here, could you perhaps explain this
a little better? sorry

No problem, my english is realy bad and i now it :-)

[kepp]

-------------------
Guarding V: 0.2.9 B
-------------------
*	Fixed total uptime of user probably saving it OK now
*	Fixed so there are 2 different follow methods, 1 to follow fails amongst users connecting to hub
	and one to follow kick / ban / warn messages etc, followprocess and unfollowprocess is used
	to follow fail messages on connecting users
*	Saving x in UserDB routine now configurable from GUI
*	Fixed error in random text display
*	Added posibility requested by Rulle to set which porifles shall receive the Hub-advertise
*	Fixed problem in Antiadvertise, no errors whatsoever, didn't work at all, Thanks voy for report
*	Fixed getinfo command not retriving info from users in offline database :)
*	Fixed saving of users not being connected ( users that failed MyINFO validation )
*	Fixed so yellow tooltips are displayed on all options + a simple information in the form were you Enable / Disable commands
*	Deleted 2 commands, +delwarn & +delkick ( used to delete specified user from the list ) Unecesary commands
*	Added slot ratio check, configurable for each profile, requested by Voy
*	Added logging of last reason in Kick / warns for use in getinfo and myinfo command, Requested by Zinden
*	Changed a little spelling misstake in Download blocker default message and immune command, Thanks Zinden for report
*	Fixed problem deleting a request, Thanks Zinden for report
*	Rewrote a part of the Text routines of Guarding, each file is now configurable for use
*	Changed directory name from 'txt' to 'Text' :D
*	Added a Howto of howto setup new profiles for Guarding, located in 'Information' folder
*	Fixed saving of offline users to database at OnExit ( Script restart or stop button )
*	Fixed error reported by EMIN3M at stringban, didn't perform action on user
*	Fixed problem on loading User DB, 'require()' for this dosen't work

Clean install required, except for some files in Settings folder.
Things that have been reported the last 2 days will be fixed in next version hopefully :)

[BeeR]

Hi kepp

Guarding looks better and better :]

2 things:
1: where do i set timevalue for random textbot in GUI ??
2: how to create textfiles in GUI [texts] dont seems to work or
i do somethig wrong (as usual) !!

[kepp]

Originally posted by BeeR
Hi kepp

Guarding looks better and better :]

2 things:
1: where do i set timevalue for random textbot in GUI ??
2: how to create textfiles in GUI [texts] dont seems to work or
i do somethig wrong (as usual) !!

1:  In Advanced tab, Interval textbox
2: I disabled the creation of textfiles for now ( Just an idea i had )
Will be enabled and working in next version i suppose :)

[BeeR]

Originally posted by kepp

Originally posted by BeeR
Hi kepp

Guarding looks better and better :]

2 things:
1: where do i set timevalue for random textbot in GUI ??
2: how to create textfiles in GUI [texts] dont seems to work or
i do somethig wrong (as usual) !!

1:  In Advanced tab, Interval textbox
2: I disabled the creation of textfiles for now ( Just an idea i had )
Will be enabled and working in next version i suppose :)

okidoki
i found random textbot - i sad before i'm blind :>
can u fix so textfiles shows ??? correct
it shows your activetext without ??? when i read that file in GUI

---------------------------------------------------------------------------
Att stlla in DC++ eller oDC i active mode med router eller brandvgg
===========================================================
 
Router eller brandvgg
----------------------------------
01. Skriv in ett nummer i portfltet, frslagsvis 1412.
02. Tillt svl TCP som UDP-trafik in och ut p den valda porten.
03. Om du har bde router och en mjukvarubrandvgg mste du tillta trafiken i bda.
04. Om du har flera datorer kopplade till routern stll in olika portar fr dem, t.ex. 1412, 1413, 1414 osv.
 
Om du fortfarande inte lyckas f active mode att fungera
----------------------------------------------------------------------------------
01. Kontrollera att du inte glmt ngot i instruktionerna eller har skrivit fel.
02. Ls manualen till din router.
03. Kontrollera tillverkarens hemsida.
04. Ls router-guiden p http://www.portforward.com/routers.htm
05. Om du har en D-Link 604 ls guiden p http://forum.directconnect.se/showthread.php?t=597
06. Om du har en annan router se om den finns med p http://www.gangefors.com/adc/
---------------------------------------------------------------------------

[kepp]

Originally posted by BeeR

Originally posted by kepp

Originally posted by BeeR
Hi kepp

Guarding looks better and better :]

2 things:
1: where do i set timevalue for random textbot in GUI ??
2: how to create textfiles in GUI [texts] dont seems to work or
i do somethig wrong (as usual) !!

1:  In Advanced tab, Interval textbox
2: I disabled the creation of textfiles for now ( Just an idea i had )
Will be enabled and working in next version i suppose :)

okidoki
i found random textbot - i sad before i'm blind :>
can u fix so textfiles shows ??? correct
it shows your activetext without ??? when i read that file in GUI

---------------------------------------------------------------------------
Att stlla in DC++ eller oDC i active mode med router eller brandvgg
===========================================================
 
Router eller brandvgg
----------------------------------
01. Skriv in ett nummer i portfltet, frslagsvis 1412.
02. Tillt svl TCP som UDP-trafik in och ut p den valda porten.
03. Om du har bde router och en mjukvarubrandvgg mste du tillta trafiken i bda.
04. Om du har flera datorer kopplade till routern stll in olika portar fr dem, t.ex. 1412, 1413, 1414 osv.
 
Om du fortfarande inte lyckas f active mode att fungera
----------------------------------------------------------------------------------
01. Kontrollera att du inte glmt ngot i instruktionerna eller har skrivit fel.
02. Ls manualen till din router.
03. Kontrollera tillverkarens hemsida.
04. Ls router-guiden p http://www.portforward.com/routers.htm
05. Om du har en D-Link 604 ls guiden p http://forum.directconnect.se/showthread.php?t=597
06. Om du har en annan router se om den finns med p http://www.gangefors.com/adc/
---------------------------------------------------------------------------

Yup, will be fixed :)

[Josecar]

Kepp congratulations by your new effort.  I continue
thinking that Guarding is the one script better designed than I
 have seen in lua.  And although I have not seen much,
seriously doubt that a better design exists.  But still I maintain the hope that some day
 will be a BASIC-Guarding or something, for those of us who we are happy
 with the elementary thing....

[kepp]

Originally posted by Josecar222000
Kepp congratulations by your new effort.  I continue
thinking that Guarding is the one script better designed than I
 have seen in lua.  And although I have not seen much,
seriously doubt that a better design exists.  But still I maintain the hope that some day
 will be a BASIC-Guarding or something, for those of us who we are happy
 with the elementary thing....

I put alot effort into Guarding, that's for sure.
A "basic" Guarding i doubt. Guarding is not "basic"
Guarding is for newbies  aswell as experienced users
in my oppinion!
The "advanced" feature of adding any profile a user desire to Guarding
was for me a challenge to figure out howto perform, and to let users choose WHAT profiles they want, instead of be stricted to them and hopefully also show other scripters how i made it!

The GUI itself, yea, it is not very well structured nor easy to understand some parts, and that is bad planning from the very beggining

[Josecar]

Perhaps my poor English lends itself to being misinterpreted.  I meant that my hope
 was perhaps some day would be two Guarding, not that guarding would be basic, for example
 BASIC-Guarding and advanced-Guarding, Guarding-pro, something like that.
 Anyway it was only an idea,  not even something that deserved an answer. Thanks, Kepp.

[EMIN3M]

Hi,

Right click commands not working, and got this error

Syntax ...\EMIN3M WORLD\scripts\Guarding.lua:1585: attempt to index field `?' (a nil value)

EDIT: Another error, Text Randomizer not working.

Syntax ...\EMIN3M WORLD\scripts\Guarding.lua:1219: attempt to index global `oFile' (a nil value)

Thanx EMIN3M :))

[kepp]

Originally posted by EMIN3M
Hi,

Right click commands not working, and got this error

Syntax ...\EMIN3M WORLD\scripts\Guarding.lua:1585: attempt to index field `?' (a nil value)

EDIT: Another error, Text Randomizer not working.

Syntax ...\EMIN3M WORLD\scripts\Guarding.lua:1219: attempt to index global `oFile' (a nil value)

Thanx EMIN3M :))

Thanks Eminem

[Josecar]

Originally posted by EMIN3M

EDIT: Another error, Text Randomizer not working.


Thanx EMIN3M :))

May be the tex randomizer is not working because of this:

local sContent = Guarding:LoadTextFile("Guarding/Settings/Text/Randomizer/"..tRandomText[ran]);

on line 386. You can simply put there the correct
access : "Guarding/Text/Randomizer/"
Let's save Kepp some searching.

[EMIN3M]

Hi, error report

Syntax Guarding/Commands.tbl:1462: attempt to index field `?' (a number value)

Thanx Josecar222000 :))

[EMIN3M]

error report

Syntax Guarding/Commands.tbl:1458: attempt to compare number with table

thanx EMIN3M :)

[kepp]

Originally posted by EMIN3M
error report

Syntax Guarding/Commands.tbl:1458: attempt to compare number with table

thanx EMIN3M :)

Thanks, lol, they will all be fixed :)

[EMIN3M]

Hi kepp hows it going, any updates?

If you need any beta testers i can help if you like? :D

Thanx EMIN3M :))

[kepp]

Originally posted by EMIN3M
Hi kepp hows it going, any updates?

If you need any beta testers i can help if you like? :D

Thanx EMIN3M :))

Yup, no betas yet, just error fixings :)
Thanks for letting me know though :D

You will have a public update in about 2 hours

[kepp]

---------------
Guarding V: 0.3
---------------
*	Fixed error reported by Emin?m in Random textbot
*	Fixed error reported by Emin?m in kick command
*	Fixed Text problem not loading ??? etc

Just error fixing today, i have a todo list but will start at that today :)

OK; so the only thing you need to replace is the GUI and the Guarding.lua, everything else you can keep ;)
Enjoy

[Jarod]

Hi Kepp, hi guys..

There are some Error in the latest release:

When i start hub:

[12:42] Syntax E:\Ptokax\0.3.3.0.b17.08.nt.dbg\scripts\Guarding.lua:1587: attempt to index field `?' (a nil value)


When i type +help:

[12:45] Syntax E:\Ptokax\0.3.3.0.b17.08.nt.dbg\scripts\Guarding.lua:1611: attempt to index field `?' (a nil value)


Guarding is very very good "Bot".. great Idea! )

Good work Kepp  

Byez.

[yoonohoo]

I create new profile and I can enter the commands manually but the rightclick isn't working.
As I'm testing this is the only script launched.
Where can I change this and make the rightclick show up?

Many thanks

[EMIN3M]

Hi, thanx for the update kepp :D

Error report on l8est version

Syntax ...\EMIN3M WORLD\scripts\Guarding.lua:1587: attempt to index field `?' (a nil value)

[kepp]

Originally posted by EMIN3M
Hi, thanx for the update kepp :D

Error report on l8est version

Syntax ...\EMIN3M WORLD\scripts\Guarding.lua:1587: attempt to index field `?' (a nil value)

Hmm, same as before..
Ok, thanks