How to add new client in 16.05??

[copper007]

In the new PtokaX release, I tried to add Zion++  (tag Z++ and Z++V). It doesn't seem to work. The only thing I got sofar was a message that I should "upgrade" to DC++ at sourceforge. After that, 16.05 disconnects.

No difference with or without RC10.01......

hmmmmmmmmm....... :P

[Pothead]

ClientTags.dat . . ..

++|DC++|
DCGUI|Valknut|
DC|NMDC2|
oDC|oDC|
DC:PRO|DC:PRO|
QuickDC|QuickDC|
StrgDC++|StrongDC++|
LDC++|LDC++|
R2++|R2++|
Z++|Zion++|

As you can see Zion is already in there, so should be aloud.  Add the other one yourself . . . .e.g.
Z++V|ZionV|

[copper007]

Tnx for suggestion...........

hmmm tried that...  but doesn't work.......

++|DC++|
DCGUI|Valknut|
DC|NMDC2|
oDC|oDC|
DC:PRO|DC:PRO|
QuickDC|QuickDC|
StrgDC++|StrongDC++|
LDC++|LDC++|
R2++|R2++|
Z++V|Zion++|
Z++|Zion++|


Not even after restart.........

rc 10 off doesn't make a difference too...

[6Marilyn6Manson6]

Add iDC++ the best client of the world ;)

iDC++|Italian DC++|

bye bye

[PPK]

Originally posted by copper007
The only thing I got sofar was a message that I should "upgrade" to DC++ at sourceforge. After that, 16.05 disconnects.

Check scripts, PtokaX don't send message like this :]

[PPK]

Originally posted by 6Marilyn6Manson6
iDC++|Italian DC++|

As i know iDC++ use normal DC++ tag, and here is nothing needed to add

[Pothead]

Originally posted by PPK

Originally posted by copper007
The only thing I got sofar was a message that I should "upgrade" to DC++ at sourceforge. After that, 16.05 disconnects.

Check scripts, PtokaX don't send message like this :]

That message comes from Robocop when it find a client not specified in the ClientTags.dat

Don't forget to reboot the hub  ?(

Originally posted by PPK

Originally posted by 6Marilyn6Manson6
iDC++|Italian DC++|

As i know iDC++ use normal DC++ tag, and here is nothing needed to add

True. iDC is detected by in description.  These settings are for Tags  not Descriptions  

[copper007]

Did that all too....  Like mentioned, even without Robocop it doesn't work
This is what I get:

[12:15] *** coppers.servebeer.com resolved successfully.
[12:15] *** 192.168.0.4
[12:15] *** coppers.servebeer.com resolved successfully.
[12:15] *** 192.168.0.4
[12:16] (192.168.0.4) > $Supports UserCommand NoGetINFO NoHello UserIP2 TTHSearch QuickList BotList ClientID SecuredExecutor GetZBlock|
[12:16] (192.168.0.4) > $Key ?????A ????07?p?????!?c?S?A5/%DCN005%/s??d??r0t??|
[12:16] (192.168.0.4) > $MyINFO $ALL zorrah   $ $Modem
$$0$|
[12:16] zorrah (192.168.0.4) > $GetNickList|
[12:16] zorrah (192.168.0.4) > $MyPass ?????|
[12:16] zorrah (192.168.0.4) > $MyINFO $ALL zorrah   $ $Modem
$$0$|
[12:16] zorrah (192.168.0.4) > $GetNickList|
[12:16] x User removed: zorrah (Socket 660)

With Zion 1.12 as well

...

[Pothead]

It lets Zion in as Unreg, reg and VIP. Not as OP / Master. Sounds like a problem with that french POS.

[chettedeboeuf]

Hi
I've the same problem with BlackDC

[Pothead]

Black DC++ . . . .

[13:04] testabc (81.86.235.116) > $BlackDC Ver:1.25r0,Bld:1386|
[13:04] testabc (81.86.235.116) > $GetNickList|
[13:04] testabc (81.86.235.116) > $MyINFO $ALL testabc $ $56Kbps
$$0$|

No tag . . . another POS. hehe

[chettedeboeuf]

And how to p?rmit BlackDC to enter in MY hub ?

I've not all understand

[PPK]

Originally posted by copper007
[12:16] zorrah (192.168.0.4) > $GetNickList|
[12:16] zorrah (192.168.0.4) > $MyPass ?????|
[12:16] zorrah (192.168.0.4) > $MyINFO $ALL zorrah   $ $Modem
$$0$|
[12:16] zorrah (192.168.0.4) > $GetNickList|
[12:16] x User removed: zorrah (Socket 660)

Disconnected because $GetNickList flooding :] Zion have very bad bug...

[Pothead]

Originally posted by chettedeboeuf
And how to p?rmit BlackDC to enter in MY hub ?

I've not all understand

Well fix the bug PPK mentioned (BlackDC send $Supports after $Key, which is the wrong way around), and give it a tag. (Both will probably require the source code. Good luck. hehe )

[chettedeboeuf]

Well, but I think that Black DC isn't an open-source cllient

Does anyone have a trick for ?

[PPK]

Originally posted by Pothead
and give it a tag.

Tag is not problem, PtokaX have option to accept clients without tag

[Pothead]

Yup, but i think Robo automatically denies no tag clients though. It did on ver 9.

[chettedeboeuf]

I use 16.05 release with Robocop v10.01a and have stopped robocop script and checked the option for no tag clients, but I've always the same message

[PPK]

Originally posted by chettedeboeuf
I use 16.05 release with Robocop v10.01a and have stopped robocop script and checked the option for no tag clients, but I've always the same message

Yes, you need new fixed version of BlackDC...