? Guarding ?

kepp · 01 April, 2005, 20:22:27

NEW SCRIPT AVAILABLE ( Guarding )

   Commands :

   +vote      -   Let users vote out other users ( protected )
   +ban      -   Ban a user
   +timeban   -   Ban a user for a specific amount of time
   +topchat   -   Shows the 10 top most active in main
   +topkickers   -   Shows the 10 top most active on the kick button
   +addtopic   -   Adds a topic
   +deltopic   -   Deletes a topic
   +startcycle   -   Starts the topic cycle ( topic is shifting automatically )
   +stopcycle   -   Stops the topic cycle
   +addrequest   -   Adds request
   +delrequest   -   Deletes a request
   +links      -   Shows the hub links
   +addlink   -   Adds a link
   +addlinktable   -   Adds a link category
   +warn      -   Warns a user x times then ban
   +kennylize   -   User speaks as kenny in Southpark
   +mute      -   Mute a user, user is not allowed to speak in main
   +passwordlist   -   Gets a list of passwords of all registered users
   +mypass      -   Shows your password
   +addbadshare   -   Adds a fakeshare
   +showbadshares   -   Show all fake-shares
   +myinfo      -   Shows some information about yourself
   +getinfo   -   Get info by online name or offline
   +showwarns   -   Show all warnings
   +showkicks   -   Show all kicks
   +addtmpop   -   Adds a temporarily OP
   +reloadsettings   -   Use instead of restartscripts when changing settings
   +searchuserdb   -   Search the offline user database table for name
   +kick      -   Kick a user
   +mass      -   Send a mass message to everyone

   This + plenty more useful / unuseful commands
   which is up to you to decide

   Some "highlights" of Guarding

   1. As configurable as possible
   2. Inteligent Fake-share check, Auto adding of them
   3. Download blocker
   4. Run as chat hub only
   5. Enable / Disable commands for each profile
   6. Anti-Advertise
   7. Extend the offline user database with users country
    Not sure bout functionality
   8. Allow / Disallow clients
   9. Minshare, Maxshare, Minslots, Maxslots, Maxhubs
    Set diferent values for each profile
   10. Dynamic share, automatically raise share according to user amount

   and bla bla bla....
   The only way you see what it actually is, is by checking it out
   and please if found, report bugs / Spelling missatkes in this Thread

* Edit : Redownload if downloaded, fixed gui error on startup

Herodes · 02 April, 2005, 01:14:04

good features it seeesss.. but it hates installers, it _hates_ installers!! It want's its precious archivess, its preciouss....

kepp · 02 April, 2005, 13:02:51

Yup, i hate them too, but for simplicity i have one, Besides, my signature now has a rar file if you find it easier to unpack the content

New version btw, some small critical fixes

-------------------
Guarding V: 0.1.5 B
-------------------
*   Fixed so it actually does disable the user database if set to disable it
*   Badwords filtering pm was left out, added back
*   Same goes for Anti Advertise on PM Check
*   Hopefully fixed error using +getinfo and retrieveing offline users, Thanks voy
*   Script now includes GeoIP, BUT, must be extended from within GUI

ruudie · 02 April, 2005, 13:23:54

i get this
You are not authorized to view this page
when i want to download the rar file

Herodes · 02 April, 2005, 13:35:11

QuoteOriginally posted by ruudie
i get this
You are not authorized to view this page
when i want to download the rar file

confirmed ... thx for releasing as archive too kepp ;)

kepp · 02 April, 2005, 13:46:14

Ruudie, Sorry, forgot toset permission of the rar archive

bastya_elvtars · 02 April, 2005, 15:20:56

You probably want to upload the script to the archive.

ruudie · 02 April, 2005, 18:34:47

thx kepp

looks pretty good, i will test it, maybe i'm going to use it for my hubs.

kepp · 02 April, 2005, 21:16:56

I appreciate it ruudie, come with sugegstions bugreports if any :)

zinden · 03 April, 2005, 10:13:18

need some info:

["Downloadblocker"] = {
		["Enabled"] = 1;
		["Prevent"] = {[0] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[1] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[2] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[3] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[-1] = {[0] = 0, [1] = 0, [2] = 1, [3] = 1, [-1] = 1}
		},
		["Message"] = "You are not athourized to download from any [PROFILENAME]!",
	},

how is that setup?
i want to have it that you need to be reg to download from anyone......and guest cant download at all....

Edit: Nevermind, better to use the Guarding.exe to set up the script instead, so this is solved now LOL

zinden · 03 April, 2005, 10:57:27

How to clear the Topkicker log?
I looked as hard as i can.....cant seem to find where to clear the topkicker log...........

found it:
i opened Hubstat.tbl and looked there...and under "8" i found the topkickers stats....so cleared it...

kepp · 03 April, 2005, 11:44:50

QuoteOriginally posted by zinden
need some info:
["Downloadblocker"] = {
		["Enabled"] = 1;
		["Prevent"] = {[0] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[1] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[2] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[3] = {[0] = 1, [1] = 1, [2] = 1, [3] = 1, [-1] = 1},
			[-1] = {[0] = 0, [1] = 0, [2] = 1, [3] = 1, [-1] = 1}
		},
		["Message"] = "You are not athourized to download from any [PROFILENAME]!",
	},
how is that setup?
i want to have it that you need to be reg to download from anyone......and guest cant download at all....

Edit: Nevermind, better to use the Guarding.exe to set up the script instead, so this is solved now LOL

Yea, The gui for the purpose of easier editing :)
It's not finished and yet has alot of things to be done

QuoteOriginally posted by zinden
How to clear the Topkicker log?
I looked as hard as i can.....cant seem to find where to clear the topkicker log...........

found it:
i opened Hubstat.tbl and looked there...and under "8" i found the topkickers stats....so cleared it...

You are right, i am missing a command to clear the topkickers and topchat, thanks

zinden · 03 April, 2005, 18:58:29

well i looked really hard this time

Seems i cant find a Register command like:
!register nickname password
Only !regme and a delete registered users.....
seems i cant find how to add a operator or a master either...

can it be added because i dont want to mix up inbuilt commands with script commands.....

Edit: or add vips

kepp · 03 April, 2005, 20:14:53

Yup, thank you and will be added :)

zinden · 03 April, 2005, 21:57:05

is there any way to easy change from using prefix + to instead use ! as prefix?

i would rather have "!" as prefix.......

kepp · 05 April, 2005, 21:18:46

-------------------
Guarding V: 0.1.6 B
-------------------
*   Screw the client "check fake-share", guarding does it all, thanks RatcomTyphoon for telling!
*   Release system rewritten from scratch, "Sort of" as FreshStuff
   Commands removed are +addrelease, +delrelease, +showreleases
   Commands added are +addalbumtype, +delalbumtype, +showalbumtypes, +addalbum
   +delalbum, +albums
*   Rewrote the mass rotuine, more robust with less code, Now able to send mass message to
   proifle desired :)
*   +cleartopkickers Command added, clears all top-kickers, request by Zinden, Added
   +cleartopchat command aswell
*   +register command, Request by Zinden, thanks, Was missing :) ( Hope it works OK )
*   Added option to choose which prefix to use, Request by Zinden :-O

If you have allready made all settings its a pain to
remake them, therefore, if downloaded, copy your old Settings.ini to the path were the exe is located.
Same goes for the settings files you have set up.
Etc: Hubstats.tbl, Fakreshare.tbl and so forth
Make sure to put the old files in correct paths, otherwise you may end up with errors!
Nuff said, I will try to come up with a nice solution to this problem :)

Have fun and report bugs, post requests :)
Regards Kepp

kepp · 09 April, 2005, 20:42:12

-------------------
Guarding V: 0.1.7 B
-------------------
*	Fixed the kick command to work with the client side kick aswell
*	sendad command now takes an argument, main / pm
*	Added some more comments to GUI
*	Added the advanced bad file search by NL, options to check each profile
	disable, enable and so forth, 3 more commands, add, del, show
*	Fixed something i missed upon adding configurable prefix, Context menu were still using '+'
*	Intergrated total hubtime in user database + command to show ones session time
*	getinfo command now fixed so it clears the user database from memory
*	Added commands to follow fails instead of taking it granted ( Prevents messy main for all )
	plus less bandwitdh, Idea from Sentinel by Ratcom_Typhoon
*	Should now be pretty safe to keep the old Settings.ini and some old Settings files
	so no re-entering is needed

Fixed alot, please report bugs / feature requests..
Comments ( Good or Bad )

Maybe you noticed a new thread at "Finsihed Script" section, That was the same as this reply just pressed wrong button, and i don't know hoto delete, sorry!! i feel so stupid..
anyway..
Enjoy

BeeR · 10 April, 2005, 02:58:02

Hi

did try your bot Guarding V: 0.1.7 (Winrar) but ,,
after several chrashes in Giu i gave up
otherwise its looks nice so -

keep up the good work :]

Typhoon · 10 April, 2005, 09:33:57

QuoteOriginally posted by BeeR
Hi

did try your bot Guarding V: 0.1.7 (Winrar) but ,,
after several chrashes in Giu i gave up
otherwise its looks nice so -

keep up the good work :]

so please post the crash reports , found in GUIHelper/errorlog.txt
so the bugs can be fixed..

Typhoon?

kepp · 10 April, 2005, 09:52:38

QuoteOriginally posted by Typhoon?
QuoteOriginally posted by BeeR
Hi

did try your bot Guarding V: 0.1.7 (Winrar) but ,,
after several chrashes in Giu i gave up
otherwise its looks nice so -

keep up the good work :]

so please post the crash reports , found in GUIHelper/errorlog.txt
so the bugs can be fixed..

Typhoon?

Yup, It's the errors i want, this last version contains an extra log file just for errors if they occur, that way i can minimze them or remove them, I've had several reports of gui errors since last night, but i had no idea were they came from, that's why i suggest sending an the error log or perhaps tell atleast what happended
and where it happened and what did you do at the time it happened :)
Makes it lot easier for me, That's why i still keep it Beta btw :)

BeeR · 10 April, 2005, 23:39:46

Hi

i did a new test today and it crashed again and no errors in the logfile ,,
it seems to crash when i do a forbidden save (missed some values before saving)
but there are another thing that gives me headache :]
when i configured GUI and saved it ,, start the hub ,, and return to GUI -
its not the same configuration in GUI that i saved before ,,
i did look in Settings.ini and the other files it shows another config from what i saved before and
its impossible to deaktivate checks on VIP's

kepp · 11 April, 2005, 17:37:42

Thank you beer, now you pointed me to a direction
Saving settings and values aren't saved etc!
Makes it a lot easier to fix and will be fixed before friday!
No requests will be added at all, only error fixing stuff + some beta tests at some friends hubs then i'll hopefully be finsihed with a none beta version this friday!
Regards kepp

zinden · 12 April, 2005, 18:03:32

Syntax G:\Ptokax Xbox\scripts\Guarding.lua:1306: bad argument #1 to `find' (string expected, got nil)

My first bug report :)

and under GUIhelper i found this:

[20:15:1]:   ( CheckUpdates )   -   An exception occurred during a WebClient request.

[20:25:58]:   ( CheckUpdates )   -   An exception occurred during a WebClient request.

[10:1:18]:   ( CheckUpdates )   -   Ett undantag intr?ffade under en WebClient-beg?ran.

juda · 12 April, 2005, 22:02:24

*
Hay!!!Very good m8!!!I like it...I try all big scripts,but this is what I want....Great !
Here is some my errors that I find...
__________________________________________________________________________________________________________________

--- GUI ERRORS ---

- GENERAL CHECKS - Checking profile on/off and than save....work ok
Enable profile check on/off don`t work after save...can`t check off any profile check

- BAD SHARE - When I want to add or delite bad share number and save.....GUI chrash (close)

!!! IF ADD OR REMOVE BAD SHARE TRUE THE RIGHT CLICK COMMAND ,WORK GOOD !!!

- ANTI ADVERTISE - If commands and settings set true the hub work ok,
but when seting true GUI,delite all addresses and leave just OK address(myftp.)
Can`t change this in GUI....

!!! IF ADD OR REMOVE ADDRESS TRUE THE RIGHT CLICK COMMAND ,WORK GOOD !!!
If add or delite OK address and BAD address work good,only whan I use command !showbadadv
don`t want to show list of bad advertise address...

- CLIENTS - Don`t save changes in GUI...

__________________________________________________________________________________________________________________

--- RIGHT CLICK ERRORS ---in file CommandLevels.tbl

_________________________________________________________________________________________
   ["register"] = {
      [1] = 1,
      [2] = 1,
      [3] = 1,
      [-1] = 1,
      ["Help"] = "      -   Register a user with given profile & password",
      ["Args"] = " ",
      [0] = 1,
      ["UserCommand"] = "$UserCommand 1 3 Guarding\\Others\\Mass$<%[mynick]> +massall %[line:Mode (pm / main)] %[line:Message]||",

ERROR-wrong ["UserCommand"]
_________________________________________________________________________________________
   ["addlink"] = {
      [1] = 1,
      [2] = 1,
      [3] = 1,
      [-1] = 1,
      ["Help"] = "      -   Add a link to specified table",
      ["Args"] = "[] []",
      [0] = 1,
      ["UserCommand"] = "$UserCommand 1 3 Guarding\\Add Commands\\Add link$<%[mynick]> +addlink %[line:Link]||",

ERROR- forget to add %[line:Table name] in the end....
_________________________________________________________________________________________

--- OTHER ERRORS ---

+cleartopkickers ...................Command clears all top-kickers ok,but when I look +topkickers dont`t work anymore...(not show nothing and delite all top kickers)

+cleartopchat ......................The same error as in top-kickers....

juda

kepp

Scripter
King
Posts: 788
Logged

(No subject)

#24

13 April, 2005, 07:34:14

Thanks alot, you will receive an update as soon as posible, fixing pretty much everything at the moment, better error handling in case of errors, wrong inputs etc
And thanks juda for the post, that makes it also easier to debug it :)