? Guarding ?

[zinden]

Hello, i just wondered why you changed mass message?

this is how it used to be:

[20:38] <-Guarding->
MASS MESSAGE FROM Zinden

This is a testing message



This is how it looks like now:

[20:38] <-Guarding-> This is a testing message


it was alot better in older version    

[kepp]

Yup, sorry about that, rewrote it to handle multi mass, old style will come back next version :)
And im pretty sure next version will be released tomorow, Alot of fixing :P

[kepp]

------------------------------------
Guarding V: 0.1.8 EFB (Error Fixing)
------------------------------------
*	Fixed more descripted follow messages
*	Fixed the topic change adding endpipe at the end
*	Changed the global tMode table to a local, taking action is faster than before
*	Fixed, help generated menu still containing '+' as prefix even though '!' is selected
*	Fixed so most of the custom function now are accessible via Guarding 'class'
*	Fixed follow command showing command in main
*	Fixed commands syntax prompt still shwoing '+' no matter if prefix was '!'
*	Fixed delbadsearch command, parsing of two arguments which is not needed, caused error too
*	Changed the way the myinfo command sends data, goes in main instead of pm, less outgoing data
*	Fixed so Denied & OK Advertising tables aren't saved unless needed
*	Fixed so Badwords table is not saved unless needed
*	fixed delalbumtype, was spelled wrong and therefore din't work
*	fixed delbadword, same as above, misspelled and cause error if use
*	Easier to maintain CommandLevels if edit manual
*	fixed some gui setings, only allows numbers at some certain places etc to prevent errors
*	Bad share section in GUI crashed when hitting Save, misspelled table cause, thanks Juda for report
*	General Checks section in GUI enabled, assigned instead of saving values to table,  Thanks Juda for report
*	Anti Advertise section in GUI saved OKHubs as the Denied table, thereby a conflict and errors, Thanks Juda
*	Client settings weren't saved at all, Thanks Juda for report!
*	Error GUI Class now changed a little to display a little more appropriated date in case of errors
*	Windows ar no shifted in GUI with a different control, Will later draw it myself but for now it works OK
	Reason due to change was because it hide a small portion of each window being maximized
*	Fixed an issue in dynamic share routine, Hawk mentioned it, thanks :D
*	Fixed problem user getting banned for fakesharing when sharing nothing at all
*	Thanks juda for some reports on Right Click Error
*	Topchat / topkickers command were failed to execute if both we cleared due to not re-creating table
*	added color configurable GUI, Choose your own custom style for the GUI ;)
*	Fixed a string.find error deleting a user record from database, LastIN property for the julian date
	to work was removed some time ago
*	Custom textfiles are now loaded up into cont menu aswell

Big update and still Beta, GUI has been improved on errors and saving and some other candy :)
Right click on gui and configure the gui colors yourself!
Like said, big update, clean install, have fun, report bugs, requests, post comments, let me keep it going :)

BTW, please tell me if link is working, having dificulties setting up a new rule

*EDIT*
My server will be down from 3:00 PM GMT+1 -> 5:00 PM GMT+1 due to moving around of furnitures

[Madman]

found a typo.... ;)

line 435

OpDisconnected = UserDiconnected

should be

OpDisconnected = UserDisconnected

[kepp]

Danke, will be fixed

[NightLitch]

Fix your server kepp...

I can't download your the latest release... I need to have a peek at your work mate  

Looking good btw.

Guess I need to give out Thor soon to give some competition hehe...  

but fix the link now...

// NL

[LiqUiD~TrolL]

hi all you guys =)


kepp the link is dead plz fix it bro

[Madman]

Originally posted by kepp
My server will be down from 3:00 PM GMT+1 -> 5:00 PM GMT+1 due to moving around of furnitures

so for another hour it will be dead...

[kepp]

It's back up and link shall be ready for clicks

[BeeR]

Gui still crash (( frmCommandLevels:LoadCommands ) - [string "chunk"]:1: attempt to call a nil value)

and when i click on detailbutton it shows this text:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Exception: [string "chunk"]:1: attempt to index global `CmdLvls' (a nil value)
   at LuaInterface.Lua.DoString(String chunk)
   at Guarding.frmComandLevels.lstProfiles_SelectedIndexChanged(Object sender, EventArgs e)
   at System.Windows.Forms.ListBox.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.ListBox.set_SelectedIndex(Int32 value)
   at Guarding.frmComandLevels.frmComandLevels_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 1.0.5000.0
    Win32 Version: 1.1.4322.2300
    CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
----------------------------------------
Guarding
    Assembly Version: 0.0.1.0
    Win32 Version: 0.0.1.0
    CodeBase: file:///C:/Testhub/scripts/Guarding.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 1.0.5000.0
    Win32 Version: 1.1.4322.2300
    CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
----------------------------------------
System
    Assembly Version: 1.0.5000.0
    Win32 Version: 1.1.4322.2300
    CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
----------------------------------------
System.Drawing
    Assembly Version: 1.0.5000.0
    Win32 Version: 1.1.4322.2300
    CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
----------------------------------------

************** JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:


   


When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.

[kepp]

I don't know what you have been doing before you get it!
According to the error CmdLvls dosen't exists
if you open CommandLevels.tbl, then look for CmdLvls = {
at the very top, is it the same name?

I have no problems here with Command levels

[zinden]

No syntax errors in script file Guarding.lua
Syntax Guarding/Commands.tbl:2014: attempt to compare number with string
Syntax G:\Ptokax\scripts\Guarding.lua:443: bad argument #1 to `sub' (string expected, got nil)
Syntax Guarding/Commands.tbl:2014: attempt to compare number with string


I know +regme password is broken, i think its that one that causes my errors....

well keep up the good work  :)
and....can you fix so Zion++ can enter the hub too?
That client cant enter even if you are a operator.

[kepp]

Yup, thank you, i will fix that, Zion++, i've ever heard about it, i'll take a look at it and see :)

[juda]

Ye!!!Good work...Found another error...
Other things work for me good..I tested almost all...and I tell you this is the ultimate script for me...I just wait for +regme fix and than I will put it on my hub !!! By from Slovenija

*
_____________________________________________________________________________________________________________________          
--- GUI ERRORS ---

  -GENERAL- Error on the (SAVE) OP;VIP & REG Chat...If I made any change on chat,don`t save the changes...
             All other settings can be change and save ok...

  -ANTI ADVERTISE- Now change and (SAVE) work ok...just when I open this settings again,all addresses are delited...
                    On the list just stay -  BAD-kick-ass.com    OK-music-heaven.servemp3.com

_____________________________________________________________________________________________________________________          

--- RIGHT CLICK ---

  Please another check for this right click commands:

  - restarthub
  - unhideme
  - sendad  
_____________________________________________________________________________________________________________________          

--- OTHER ERRORS ---


  !regme xxxx   - command don`t work !!!
                  I get this Syntax error:  Syntax Guarding/Commands.tbl:2014: attempt to compare number with string


  !showbadadv   - command don`t work and don`t get any Syntax error...

_____________________________________________________________________________________________________________________

[zinden]

http://virus27.free.fr/

There is the client.....no fake or anything like that.
More like a Operator client. Well it is a operator client like idc++

[kepp]

-----------------
Guarding V: 0.1.9
-----------------
*	Added the speed Modem to the list of speeds
*	Added the client Zion++ to the list of clients
*	Fixed chat error reported by Zinden, Thanks
*	Fixed some small things in user level table, thanks Juda for report
*	Fixed +showbadadv, thanks Juda for report, forgot to remove prefix before change 4-5 versions back
*	Fixed regme error caused by gui saving Minimum pass value as string
*	Fixed Anti Advertise in gui setting lua table to nil, therefore only last address was saved

Enyoy, Report Bugs / Errors  :D
***
Buttons styles in gui will be implented later

[zinden]

I got a error bug, but i have no idea how the error appeared:

Syntax G:\Ptokax\scripts\Guarding.lua:462: attempt to concatenate global `Prefix' (a nil value)

[kepp]

Thank you, will be fixed in 0.2 release

[zinden]

About using Zion++ we get this:
- [19:14:10] <-Guarding-> You are being disconnected due to unknown speed setting!

and about topkickers...how does it work?
i kicked 8 ppl and it saved to file after 5 kicks (that i config)
but im not in topkickers list.......
and best one has 3 kicks.......
i used +kick command, not inbuilt kick.

Topkickers = kicked users?
Well would be much nicer to see which op that kicks most instead  

[kepp]

Zinden, i'll take a closer look into the Zion++ speed settings
It should work with other speeds though

About the topkicker, i haven't noticed any problems
It logs the amount you as an operator kick, no the amount of users kicks...
I'll take a closer look at that too, may be some bug!
It dosen't matter which kick command you use, inbuilt or
the script one, it logs them both!

Thanks so far, really appreciate it :D

[kepp]

---------------
Guarding V: 0.2
---------------
*	Fixed prefix error reported by Zinden when using the inbuilt client kick command
*	Fixed topkicker logging reported by Zinden, Indeed it logged some users BEING kicked
*	Took another close look at topkicker logging and noticed in some cases was added twice
*	Operator disconnection routine now works due to misspell, thanks ( PLEASE REMIND ME OF WHO REPORTED IT )
*	Forgot to add "Wireless" connection, Zion++ failed to login if it was used, Thanks Zinden for report

New update, just some fixes in script

You can replace most files with your old ones ( One version back ), except for Settings.ini, Guarding.lua, Commands.tbl

Have fun, you know the drill about bugs and... yea
Enjoy

[zinden]

before release 0.20 the topkickers only registered if you kicked with inbuilt kick, And if you kicked them by that, they didnt get kicked....only message appeared in mainchat and the user was still in the hub.

and if you kicked with +kick from script they got kicked, but it didnt registered in topkickers..........

[kepp]

Originally posted by zinden
before release 0.20 the topkickers only registered if you kicked with inbuilt kick, And if you kicked them by that, they didnt get kicked....only message appeared in mainchat and the user was still in the hub.

and if you kicked with +kick from script they got kicked, but it didnt registered in topkickers..........

The reason of why it didn't kick when using the inbuilt was as
stated in changelog an error attempting to find a prefix which didn't exist, that is fixed :)
topkickers should work just OK now aswell as saving of them
Please report more about it if you find something weird about it

[zinden]

take a peak in rightclick and under "others" then mass.
it want me to write profilename then Register name.....
must be a typo there  

Request: add a command like "+upgrade user op"
upgrading a registered user, or a vip to operator status.

[zinden]

ok, seems like Zion++ cant get in  ;(
- [09:34:54] *** Connected
- [09:34:57] <-Guarding-> This hub is running PtokaX DC Hub 0.3.3.0 build 16.09 (UpTime: 0 days, 13 hours, 55 minutes)
- [09:34:58] <-Guarding-> You are being disconnected due to unknown speed setting!
- [09:34:58] *** Disconnected

Well i did some resource and find out that he is using netlimiter from: http://www.netlimiter.com
and when he uses Zion++ and netlimiter it instead of having DSL, Cable, T1, T3 or something in connection speed it haves instead:  NetLimiter [25 kB/s]
or any ** kB/s  Thats why he cant enter.....
Can you make it so ppl can enter anyway if they use Netlimiter? or a option to let them thru or not?
and maybe config if only vip and above can enter with it?


And he tried to remove the netlimiter and enter hub, but he gets disconnected everytime he tries to enter with Zion++
 Thats the tag.....


[09:54:14] *** Connecting to *******...
- [09:54:18] *** Connected
- [09:54:22] <-Guarding-> This hub is running PtokaX DC Hub 0.3.3.0 build 16.09 (UpTime: 0 days, 14 hours, 14 minutes)
- [09:54:24] *** Stored password sent...
- [09:54:40] <-Guarding-> # Type +help in main to get available commands for you!

- [09:54:43] *** Disconnected

so something is weird.....