PreRelease of NXS-4 1.5 Alpha2
Download! (http://swenorth.myftp.org/network/nightlitch/nxs-4/nxs-4%20v.1.5.alpha2.prerelease.rar)
(http://swenorth.myftp.org/network/nightlitch/nxs-4/smile.jpg)
is the forum so dead ?
Het this is the brand new NXS-4 with GUI ppl... :D
QuoteOriginally posted by NightLitch
is the forum so dead ?
Het this is the brand new NXS-4 with GUI ppl... :D
gotta hand it to ya, very nice job, as for using the lua, as u know working on new project that im adding way more support, directx calls, opengl and loads more...so if ya like i'll setup so works with wk same as lua....ya might be able to have bit more fun ;)
great, now im off to test the GREAT script :D
QuoteOriginally posted by (uk-kingdom)pH?tt?
QuoteOriginally posted by NightLitch
is the forum so dead ?
Het this is the brand new NXS-4 with GUI ppl... :D
gotta hand it to ya, very nice job, as for using the lua, as u know working on new project that im adding way more support, directx calls, opengl and loads more...so if ya like i'll setup so works with wk same as lua....ya might be able to have bit more fun ;)
Sounds good... Gonna check your project more when I get the time...
cheers
So silent.... What do you ppl that download and try this think about it ?
Or do everyone prefer RoboCop 7. Must say that you have done a GREAT job Optimus.
cheers
well i get alot of errors :(
Syntax error: attempt to index global `AllowSpeed' (a nil value)
stack traceback:
1: function `ClientCheck' at line 30 [file `modules/clientcheck.lua']
2: function <85:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 87
3: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Syntax error: attempt to concat field `T' (a nil value)
stack traceback:
1: function `DoInfo' at line 61 [file `modules/command functions/info.lua']
2: function <93:file `settings/commands.dta'> at line 93
3: function `DoCom' at line 405 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <77:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 81
5: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
What can be wrong?
QuoteOr do everyone prefer RoboCop 7. Must say that you have done a GREAT job Optimus.
i'm almost feeling guilty about it, it al started as a joke if you know what i mean.
Must admit that i don't do this all alone i have a good friend that does most of the GUI at the moment. Other it will be to much work for 1 men.
The main secret/succes is that the bot is verry user Friendly. Maybe commercial is the right word duno for sure.
bye and goodluck m8 :))
QuoteOriginally posted by zinden
well i get alot of errors :(
Syntax error: attempt to index global `AllowSpeed' (a nil value)
stack traceback:
1: function `ClientCheck' at line 30 [file `modules/clientcheck.lua']
2: function <85:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 87
3: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Syntax error: attempt to concat field `T' (a nil value)
stack traceback:
1: function `DoInfo' at line 61 [file `modules/command functions/info.lua']
2: function <93:file `settings/commands.dta'> at line 93
3: function `DoCom' at line 405 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <77:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 81
5: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
What can be wrong?
Am gonna fix that error I forgot a table in the source code that is in the gui but not in main script...
Above link is updated with the update fix no more erros I hope...
still this:
Syntax error: attempt to concat field `T' (a nil value)
stack traceback:
1: function `DoInfo' at line 61 [file `modules/command functions/info.lua']
2: function <93:file `settings/commands.dta'> at line 93
3: function `DoCom' at line 405 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <77:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 81
5: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Syntax Error: attempt to concat field `T' (a nil value)
The !info doesnt work at all
QuoteOriginally posted by zinden
still this:
Syntax error: attempt to concat field `T' (a nil value)
stack traceback:
1: function `DoInfo' at line 61 [file `modules/command functions/info.lua']
2: function <93:file `settings/commands.dta'> at line 93
3: function `DoCom' at line 405 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <77:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 81
5: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Syntax Error: attempt to concat field `T' (a nil value)
The !info doesnt work at all
Ok thx gonna fix that bug when I get the time then... thx Zinden.
stack traceback:
1: function `DoCleanInfo' at line 9 [file `modules/command functions/cleaninfo.lua']
2: function <94:file `settings/commands.dta'> at line 94
3: function `DoCom' at line 405 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <53:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 65
5: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Syntax error: attempt to perform arithmetic on global `WEEKS' (a nil value)
Syntax error: attempt to concat field `T' (a nil value)
stack traceback:
1: function `DoMyInfo' at line 17 [file `modules/command functions/myinfo.lua']
2: function <22:file `settings/commands.dta'> at line 22
3: function `DoCom' at line 405 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <77:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 81
5: function `DataArrival' at line 323 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
!myinfo
!share
!mytime
Doesnt work at all ;(
Who will say me how this acts, because to enter nobody can not. To enter some announcement itd. Me as administrator eternally I can not ! ?(
Zinden:
fixed:
myinfo, it was a parse thingie, I forgot a nil value... lol
share is fixed to, wrong tablename...
the mytime is find strange, I myself have no problem with it... Just for the record when you put in my script the hub need a restart, not a script restart, a hub restart, if not you will get problem with the time command, becouse they are triggerd when user connects so the log into the time file.
Marecki:
I don't understand what you are talking about, plz explain some more pls...
Not sure if it is me ,but my users keep getting refused entry because of max hubs / slots....
They keep getting the message you are in too many hubs max is 0 hubs. i have tried to change the settings, but with no results, i even restarted the hub software.
Any help would be much appreciated as i would really like to use NXS-4 as i have run NXS-3 with no problems.
Thanx
[GB]S?c??L-?p?
QuoteOriginally posted by [GB]S?c??L-?p?
Not sure if it is me ,but my users keep getting refused entry because of max hubs / slots....
They keep getting the message you are in too many hubs max is 0 hubs. i have tried to change the settings, but with no results, i even restarted the hub software.
Any help would be much appreciated as i would really like to use NXS-4 as i have run NXS-3 with no problems.
Thanx
[GB]S?c??L-?p?
When changing the values in the roller list you can NOT enter the value you must "scroll" to the values...
ex:
[ ] up/down arrow
type a number and then scroll up or down and back then the number is accepted I haven't found a way updating it in any other way... sorry...
remember so save the settings and restartscripts...
Should work without any bigger problems
Marecki:
Just disable in "Share/Security" Media force check
that one makes only operators can enter. (i think so)
i disabled it and now ppl can actually get in to the hub :]
I think its a bug in the script.......not sure, Nightlich will problably take a look when he reads my post ;)
Tried all the above with no results.....
Users still getting rejected.. :-{
In Share/Security remove all things there in the right side. Then they can enter (i hope)
Then add one by one back those you need.
Thats how i fixed it 8)
Why did kick info and kick reason vanish under command !info nick ?
Thats was very useful to me and my operators.
Now they start to go berserk on me :))
and:
!getkicks user dont work
!getwarns user dont work
and a ban command seem to be out of order
stack traceback:
1: function `DoGetKicks' at line 14 [file `modules/command functions/getkicks.lua']
2: function <88:file `settings/commands.dta'> at line 88
3: function `DoCom' at line 407 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <79:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 83
5: function `DataArrival' at line 325 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
stack traceback:
1: function `DoGetWarns' at line 14 [file `modules/command functions/getwarns.lua']
2: function <87:file `settings/commands.dta'> at line 87
3: function `DoCom' at line 407 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <79:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 83
5: function `DataArrival' at line 325 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Syntax error: attempt to call field `SD' (a nil value)
stack traceback:
1: function `DoBan' at line 19 [file `modules/command functions/ban.lua']
2: function <44:file `settings/commands.dta'> at line 44
3: function `DoCom' at line 407 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
4: function <79:file `H:\ptokax testdrive 4\scripts\NXS-4.lua'> at line 83
5: function `DataArrival' at line 325 [file `H:\ptokax testdrive 4\scripts\NXS-4.lua']
Well i eventually got my users in by disabling a few of the functions in Share/security setup..a few bugs there i think..
Looks nicethough , but hopefully when it is bug free in the future it will be even better.
nice work.....
cant wait to see the final version, with all the fixes..
thanx for your hard work NightLitch.
I am also getting this
Syntax error: attempt to call field `UnegBot' (a nil value)
stack traceback:
1: function `Main' at line 174 [file `...gs\Steve\Desktop\{{NEW HUB }}\scripts\NXS-4.lua']
Damn, Zinden your good finding my bugs, and that I thank you for... gonna see what I can do...
i just LOVE your script :P
keep the good work and i keep up sending bug reports ;)
hmm:
Syntax error: attempt to compare number with nil
stack traceback:
1: function `StoreCount' at line 533 [file `H:\Ptokax hub\scripts\NXS-4.lua']
2: function `NewUserConnected' at line 223 [file `H:\Ptokax hub\scripts\NXS-4.lua']
dont know why this bug msg has arrived ?(
but you problably knows what bug it is......
Hope we see a update of script with less bugs soon, im waiting every day :))
Like the script but im getin a few errors and i dnt like the gui. Keep up the good work tho could be a grate script.
I must say NL, you made an awesome bot, and i am very happy to haev found it, i found one bug that isn't too important for me since i found a way around it; but for the noobs it would be nice to have it fixed. When you use the gui to set up the min share for the hub. I set the min share for 5GB for regular users, BUT after you save it, it sets it to 500gb EVERY TIME, i have redled teh bot and everything, it's hardcoded into the config file, so if you just open up the cfg file, you can change it in there with no problem and it stays. That is the only bug i have found. Now there is one thing i would LOVE to see in this bot if you ever feel like doing it. Custom intros and outros for the users VIP, KVIP, OP, and master. that would make this bot practically perfect atm. ^_^ I tried doing it myself but i am too much of a noob at lua for now, it was an ugly site, trying to splice smeagol and nx2-4, it went horribley wrong XD, allwell maybe i'll get it someday, but it's just something that I myself would like to have implemented, and if any of you "elite" lua proggers would be willing to help me out that would be great, juat pm me ^_^ thx once again for a great bot NL.
Syntax error: bad argument #1 to `strfind' (string expected, got nil)
stack traceback:
1: function `strfind' [C]
2: function <538:file `Thor.lua'> at line 541
3: function `DataArrival' at line 367 [file `Thor.lua']
is it possible to take away the peerguardian mess who pops up in opchat
Forget NXS-4 now... Look at THOR instead have all NXS-3 & NXS-4 had plus much more... AND less buggy...
Find THOR here: Link (http://board.univ-angers.fr/thread.php?threadid=2199&boardid=15&styleid=1&sid=044a6e8071971bf8d7c0501669535bf4)
QuoteOriginally posted by gizmo
is it possible to take away the peerguardian mess who pops up in opchat
does the peerguardian function in Thor send allot of messages to your op chat? Then your hub might be popular to RIAA :P
its in thor the bug is :P
QuoteOriginally posted by gizmo
its in thor the bug is :P
Well not yet... Gonna see when I get the time fixing the reports from various functions...
If you can't live with it... then give up the Bot... ;-P hehe
Gonna try working on a Update when I get the time, but have more things in my life doing right now... Have worked my ass of 2 just release this Bot public have run it for 2 month's in a hub...
I just wanted the critical bugs fixed first and that the bot works without any bigger problems...
/NL
QuoteOriginally posted by gizmo
its in thor the bug is :P
And just for the record this is NXS-4 Thread not THOR so post in right section... :P
/NL
I love this NSX script, and hope you never quit updating it. I was originally looking for Skybot, until i found out this was the new updated/taken over Skybot project.
Could you add a minimize to tray button for the gui?
I like it, but was bothered that i couldn't get it from hogging up my desktop with a minimize feature.
Keep up the awesome work!
:] :] :] :]
QuoteOriginally posted by Jammaniaclord
I love this NSX script, and hope you never quit updating it. I was originally looking for Skybot, until i found out this was the new updated/taken over Skybot project.
Could you add a minimize to tray button for the gui?
I like it, but was bothered that i couldn't get it from hogging up my desktop with a minimize feature.
Keep up the awesome work!
:] :] :] :]
Take look at THoR 2.0 instead, that is the follower after NXS, NXS-4 is a closed project, and NXS-3 in continued by my HubOwner Dyzan at a slow rate but going slowly forward....
/NL