With this script and with this application you can easily set up your PtokaX hub from a remote machine :) Many admin runs his/her hub from server, and with this app you can set it up much easy as with remote desktop, or if you just want to give access to your operators to set up the hub. It's the very first release, maybe contains bugs, but if you find one, please report it to ejjeliorjarat [at] gmail [dot] com, what you did and what went wrong. Everything you must know is in the Readme.txt, so please read that first. The attached file contains two files:
- Scripts.rar - unpack it to the main folder of PtokaX, so the dll files must be between the PtokaX.exe
- Client.rar - This contains the client, you can unpack it to everywhere in your computer. It looks very similar as PtokaX user interface.
To run it, you have to install .NET framework 1.1 version, which is avaible here (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=262D25E3-F589-4842-8157-034D1E7CF3A3) (24 MB)
The application works with 0.3.5.2 (and later) versions of PtokaX.
and then put a pipe before the script.???
what do you mean by this sentence
qwhen i try to connect the hub from ptokax remote admin.exe it gets connected by all users get disconnected and when users try to connect then ptokax remote admin gets disconnected
Work Good TNX ;D
Hey nice work Hungarista.. ;)
Bug:
Whenever I try to reg any user with Profile as "reg" , he gets regged with profile "master" only.
And why dont we get the reglist and the script's list in the Ptokax administrator??
Quote from: Yahoo on 18 March, 2007, 14:42:58
and then put a pipe before the script.???
what do you mean by this sentence
You have to start the script to able to set up your hub, because the client uses it's own protocol on UnknownArrival()
Quote from: Yahoo on 18 March, 2007, 14:42:58qwhen i try to connect the hub from ptokax remote admin.exe it gets connected by all users get disconnected and when users try to connect then ptokax remote admin gets disconnected
Hmm, no idea why, maybe try to check the logs or check the commands sent by the client... ???
Quote from: speedX on 19 March, 2007, 06:15:21
Bug:
Whenever I try to reg any user with Profile as "reg" , he gets regged with profile "master" only.
And why dont we get the reglist and the script's list in the Ptokax administrator??
Hmm, the first is because the wrong reglist - seems the hub didn't send it... After you click or Load reglist button, nothing happened? Then plz send me what profiles do you use. The scriptlist was a little bit buggy since the begining, because it use !getscripts command, and parses the sent data. So, please give the right to the client to get scripts in the Account manager.
By the way, the application will be open-source as soon as my sf.net account will be confirmed, so if somebody feels help me, let's do it, i am just a script kiddie :P
Quote from: Hungarista on 19 March, 2007, 09:37:01
After you click or Load reglist button, nothing happened?
When i clicked on the Load Reglist button, it showed only 10-12 registered users...but actually there are around 1400 user regged on my hub.
And I use the same Ptokax inbuilt profiles. (Master, operator, vip, reg)
This is nice Hungarista! Thanx.
Quote from: speedX on 19 March, 2007, 09:44:25
When i clicked on the Load Reglist button, it showed only 10-12 registered users...but actually there are around 1400 user regged on my hub.
And I use the same Ptokax inbuilt profiles. (Master, operator, vip, reg)
Maybe it loads too slow (the hub sends it), try to wait... On localhost with 600+ registered users worked fast, but from a remote machine 1400+ users... Maybe it can be slow. By the way you can add users without loading reglist...
The best will be if PPK can a new feature: to modify the PtokaX.ini from lua-side, so everything will be setable, eg. after frmHub:ReloadSettings() call. It would be very good I think ::)
First post has been updated, new version avaible, many minor and major bugs have been fixed, now it works well as far as I know. Other bugs are still welcomed in ejjeliorjarat [at] gmail [dot] com
PPK: have you read my previous post? ::) Many user like this application (at least on Hungary, hehe), but without the most important tab, the settings tab, it's a half application....
What are you talking about? What are the options you can not set from within lua?
Let's see:
(http://img231.imageshack.us/img231/3696/rulesnp1.png)
(http://img231.imageshack.us/img231/6229/optionsfe3.png)
(http://img231.imageshack.us/img231/9350/deflooddm9.png)
Marked with red what I am missing... :-\
i get same bug it's tell me
Appliction has generated an exception that could not be handled
process id=0x6bc (1724), Theread id=0x2dc (732).
click ok to terminate the application.
click cancel to debug the application
Yeah, known bug, fixed in next version. The next version is converted to C, so I need a little more time ;D But they will be fixed, thanks.
It will be in C? Wise decision!:)
The new version is in the first post. Maybe all the bugs has been fixed (I just hope). It's still in VB.NET, so framework still needed. Some new features added too, like open your favourite script-editor application, read settings from PtokaX.ini file, and so on... As I saw, it had more then 70 download, so I think it become helpful. Nice to see, and sorry for the slow developing, but I had/have exams...
IMPORTANT!
Please update the settings.lua file too, it changed too! Without it the application won't work correctly!
i get again bug
Appliction has generated an exception that could not be handled
process id=0x14bc (2580), Theread id=0xd18 (3352).
click ok to terminate the application.
click cancel to debug the application
and when i enter cancel i get more 1 window and its type me
Registered JIT debugger is not available. An Attempt to launch a JIT debugger with the follwing command resulted in an error code of 0x2 (2). Please check computer settings.
cordbg.exe !a 0x5d8
click on retry to have the process wait while attaching a debugger manually.
click in cancel to abort the JIT debug request.
Please write me what you tried to do? Just opened the app? Clicked on Login button? minimized the app? Or what? And JIT debugger generates more detail, please send me that at ejjeliorjarat [at] gmail [dot] com. Thanks.
only open the app and i get this
Hello Hungarista...
When I click on LOAD REGLIST it shows tht the software has encountered a problem and needs to close :(
Wat to do?
works fine for me
and remote ptoakx for me not work only see list script and chat and when my script Leviathan down is work i fix the bug Leviathan runing agian and remote agian not work all
that means leviathan is blocking the remote script, and NOT that the remote script is not working *g*
Quote from: Psycho_Chihuahua on 30 May, 2007, 16:06:34
works fine for me
How many users are there in your hub m8?
For me with 620 users worked well. Give settings.lua higher priority as Levithian.
tested in my testhub with 52 users and works fine
i have 70-100 users i only open hub and only scripts list and chat is worked for me
Quote from: Psycho_Chihuahua on 30 May, 2007, 16:52:37
that means leviathan is blocking the remote script, and NOT that the remote script is not working *g*
Yes indeed it seems that Leviathan and the remote are not compatible. It is quit normal because Leviathan does handle all the commands by itself and it is not thePtokaX who is handling them. Allready to put the settings.lua in first place, before Leviathan is not compatible with Leviathan script.
Work very fine m8! Nicely done, very simple to use ;D
There are around 1800 registered users here and not working here :(
Hungarista could u plzz tel me wat is the problem???
Quote from: Mutor on 08 June, 2007, 06:09:43
The problem is in front of the keyboard, see 'Mirror' for more. :P
??
Quote from: Mutor on 08 June, 2007, 06:09:43
The problem is in front of the keyboard, see 'Mirror' for more. :P
hehe good answer Mutor
I think that what Mutor is saing is that it's an ID 10 T error.. ;-)
Snooze
It`s this secured? a hacker can "hack" my connection between me and the remote server.
Quote from: microsoft on 24 July, 2007, 00:31:29
It`s this secured? a hacker can "hack" my connection between me and the remote server.
This connects as a user. So it's as secure as DC protocol is.
ok thx ;D
when i runs the hub on the same computer the hub is going on it works fine but when i change to run the hub on another computer it wont work i can get the connection
but i cant get any info hope you understand what i mean
:)
Are you sure the address id OK?
yes can find the problem ???
sorry i have the right adress but i cant find what the problem is ???
can i t have to do whith my router maybe ???
can it have to do with some other script i run in the hub
[ 1 ] settings.lua
- [ 1 ] RoboCopv10.023.lua
- [ 1 ] Reboot message v 1.01.lua
- [ 1 ] - mainmess.lua
- [ 1 ] -RightClicker UserCommands.lua
- [ 1 ] advertise.lua
- [ 1 ] anti-dcgui.lua
- [ 1 ] antinetlimiter.lua
- [ 1 ] BadFile Active.lua
- [ 1 ] block.lua
- [ 1 ] Botfia.lua
- [ 1 ] FunScriptV8.lua
- [ 1 ] F?delsedagsBoten.lua
- [ 1 ] HubRanks_v3.6.lua
- [ 1 ] Hubstats.lua
- [ 1 ] Lito-Messenger-Bot.lua
- [ 1 ] RecordBot 1.5.lua
- [ 1 ] textmain.lua
- [ 1 ] textPM.lua
- [ 1 ] trigs.lua
- [ 1 ] freshstuff3_4.4_RC4.lua
- [ 1 ] LifeTime.lua
- [ 1 ] AverageShare Bot.lua
- [ 1 ] block user.lua
- [ 1 ] public_disc.lua
- [ 1 ] teambot.lua
- [ 1 ] SweBot.lua
- [ 1 ] PM Passive 1.0..5.1.lua
- [ 1 ] Pass Cleaner..5.1.lua
- [ 1 ] NHb_2_110.lua
- [ 1 ] NewReg Welcome.lua
- [ 1 ] IP Watchdog.lua
- [ 1 ] Userupgrade.lua
- [ 1 ] RegStats.lua
- [ 1 ] Hider.lua
- [ 1 ] FilmBot.lua
- [ 1 ] rightclick-Menu.lua
- [ 0 ] rightclick-Owner.lua
- [ 0 ] ClockBot 5.1.lua
- [ 0 ] Request Bot.lua
- [ 1 ] Usercount.lua
- [ 1 ] offpm.lua
- [ 1 ] HubBackup.v.1.0.LUA5-TTB.lua
- [ 1 ] Statbar Messages 1.0.lua
Hi when i try to run remote administration
i load the Prokax.ini file. when i try to connect i get this error
[9/10/2007 2:58:22 PM] *** Your Client is not allowed in this Hub! Please update!
[9/10/2007 2:58:23 PM] *** Disconnected
...
what could be the problem ..
i use
Ptokax DC Hub 0.3.6.0
Lua 5.1.2.....
That sound like a scripted message to me.
Do you run any scripts that might block the client from connecting?
/Snooze
well only one script the setting.lua and ur DiXbot.lua thats it................
If I recall correctly, Robocop includes a client checker
Fixed in PM..
/Snooze
Hi , I had a question is it possible to redirect users to another hub incase my hub is not runnin....................a script or something...............
If you can't login because wrong client, add an another MyINFO, you can set up an another (what you want...). akarparekh: you can't redirect all user from the program, it's for setting up your hub.
Hey Hungarista , Sorry man it got a little confusin Snooze already solved the earlier problem and had another question....
Anyway, I started a hub (Using PtokaX) and have a couple questions:
1. Example:
Hub 1(MY PC) & Hub 2(MY FIRENDS PC).....(BOTH IN THE SAME LAN)
Say my computer crashed cannot start Ptokax..... Hub 1 is down, so when people try to connect to Hub 1, they automatically get redirected to Hub 2.
2. What scripts would you guys recommend?
Help would be appreciated. :tilted
This remote administration program works, when the PtokaX program is running. It surely doesn't in charge of redirection and other PtokaX-side problems, like it crashed (or your system).
can it done if Hub1 is not on
Hi,
There is a little problem with the Remote Administration....
I run Ptokax 0.3.6.0....
I have a friend who uses Remote Administration... When ever i m not arround...
Whenever he tries to add user form the Ptokax remot Administrator.. he changes the user profile to Reg, however when the same users logs in he becomes the owner of the hub...n when he Reloads the Reglist the same users profiles is Owner....
Why does this happen...
I use DixBot......
My guess is that the Remote Admin script is not Profile aware.
You might need to manualy add the missing profiles in the script.
/Snooze
Hi guys/girls !
Is there any plans to make this work with new ptokax 0.4.0.0 ?
I've tried, and it dosn't work?
Hope to hear from someone soon //CJ
Can we get this upgraded to work in Ptokax 0.4.1.1??
thanks
1-2 day and I'll release it. It need some fixes on Unix, because multithreading can cause some errors. UDP debug receiver is also tested now. So, wait a few days, and you can use it :)