DC++k CDM - Page 6
 

News:

29 December 2022 - PtokaX 0.5.3.0 (20th anniversary edition) released...
11 April 2017 - PtokaX 0.5.2.2 released...
8 April 2015 Anti child and anti pedo pr0n scripts are not allowed anymore on this board!
28 September 2015 - PtokaX 0.5.2.1 for Windows 10 IoT released...
3 September 2015 - PtokaX 0.5.2.1 released...
16 August 2015 - PtokaX 0.5.2.0 released...
1 August 2015 - Crowdfunding for ADC protocol support in PtokaX ended. Clearly nobody want ADC support...
30 June 2015 - PtokaX 0.5.1.0 released...
30 April 2015 Crowdfunding for ADC protocol support in PtokaX
26 April 2015 New support hub!
20 February 2015 - PtokaX 0.5.0.3 released...
13 April 2014 - PtokaX 0.5.0.2 released...
23 March 2014 - PtokaX testing version 0.5.0.1 build 454 is available.
04 March 2014 - PtokaX.org sites were temporary down because of DDOS attacks and issues with hosting service provider.

Main Menu

DC++k CDM

Started by Roy, 07 January, 2004, 10:54:26

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

AlwaysConnected

QuoteOriginally posted by [NL]trucker
grrrrrrrr  ?(

after putting the /raw command in front of

$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype]|<%[mynick]> is kicking %[nick] because: %[clienttype]|<%[mynick]> ?kick %[nick] %[clienttype]|


i started dc++kcmd again and after a while i suddenly got disconnected :(

so i,m going back to 2.62 atleast that wone worked for me.

i have a working 2.72 :)
contact me later :)

i know where the prob is ;) i think


Gnuff?

Someone who can help me out here??

I need a rawcommand which are NOT shown in main, but okay if it will be shown i the little field under main+ gives a notice in opchat with description.

Need a command for both kick and ban
Gnuff

cpu_point

Try this one, it will give the desired details in PM to faker and info in opchat : [OpChat] can be any other name..


$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: [OpChat] From: %[mynick] $<%[mynick]> has kicked %[nick] because: %[clienttype] - %[cheatingdescription]|$Kick %[nick]|


this is for badfiles section :

To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: [OpChat] From: %[mynick] $<%[mynick]> has kicked %[nick] because: %[clienttype] - %[cheatingdescription]|


I like the option of sending the kickwarnings etc to the opchat and not in the little field below, because when a user did not configured his client at the right way, he will see all the messages.
-Dutch Music Network Owner-

AlwaysConnected

DC++k detector

$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] %[cheatingdescription]|<%[mynick]> is warning %[nick] because: %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|


------------------------------------------------------------------
Send a Warn to the user , a warn to the OpChat and a warn to the main

Bad Client version
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] - %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> ?kick %[nick] %[clienttype]|
----------------------------------------------
send a kick to the user, opchat and to the main

you can change of corse the
!warn by !kick or !ban

and the
?kick  by !ban or !kick

:)

Gnuff?

cpu_point wrote
Quotethis is for badfiles section :

Sorry, but i did?nt get that, what do you mean by that?
Gnuff

Gnuff?

Thanks a lot AlwaysConnected, thats more my language  he he

But the field in DC++K Detector is graymarked???
Gnuff

Gnuff?

Damn i?m not awake enough i guess.. Maybe 36 jours uptime is too much for me, now that i?m getting old  LoL

My mistake, i was looking in settins/DC++K Detector :O
Gnuff

Gnuff?

Thanks for the raws AC, but the kicks still show up in main, am i doing something wrong??

This message came in main:

[00:32] !kick kuazo Too even share size - 8256000884736 B = 7.51 TB - the share size was divisible by one megabyte

Is it possible to get those away from main, or do they have to be there??
Gnuff

AlwaysConnected

QuoteOriginally posted by Gnuff
Thanks for the raws AC, but the kicks still show up in main, am i doing something wrong??

This message came in main:

[00:32] !kick kuazo Too even share size - 8256000884736 B = 7.51 TB - the share size was divisible by one megabyte

Is it possible to get those away from main, or do they have to be there??

$To: %[nick] From: %[mynick] $<%[mynick]> You are being Warned because: %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] %[cheatingdescription]|<%[mynick]> !warn %[nick] %[cheatingdescription]|

Try above one

AlwaysConnected

*** DC++k CDM V2.73 - 23:38 28/01/2004 ***

Fixed bugs with %[file] etc not working in raw user commands.
Added +check to OpChat to allow remote manual checking of users.
Added an experimental feature to check for duplicate IP's across multiple hubs. When a user is checked all other connected hubs will be checked for the same IP. The results can be seen in +info/report. I'll add a raw command later that can be sent if the user is found to be in more hubs than his tag shows.


DC++kCDM 2.73



http://www.imperialnet.org/forum/viewtopic.php?t=214

Gnuff?

Hmm, seems like no matter which raw i?m using the kick still shows up in main.
Have even tryed all the raws from the guide, but same result, what am i doing wrong??
Gnuff

[NL]trucker

Gnuff


what main bot are you using it could be that it is because of your main script that it is showing messages in main.
Owner of FunnyHub
 
Funyhub.no-ip.info
       Forum Master of


Gnuff?

I?m using Dc++0,306 for my self
The fakeChecker is running om DC++K CDM 2.73

I have been asking the same question in another forum too, and have got a lot of answers, but no matter which command i use it shows in main.

The last post i got is this:

Try this one, if it is the "?kick " that you dont want to see

Code:
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[cheatingdescription] Any complanes please contact dkvip4@hotmail.com|$kick %[nick]|

But after a restart of DC++K CDM main lock like this:

[19:34] !kick weedewu
[19:37] !kick Fanta

at least the reason for the kick is not shown anymore, but it?s annoing for the users to see all those messages
Gnuff

AlwaysConnected

perhaps try this one

$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|$To: OpChat From: %[mynick] $<%[mynick]> User: %[nick] - %[clienttype] - %[cheatingdescription]| <%[mynick]> !drop %[nick]|

Be sure you bot knows !drop <--

Gnuff?

Thanks AC!

I think i got it now, som settings i also had to chance, now it?s not shown in main anymore

And a thanks to all other who have responded on this tread
Gnuff

AlwaysConnected

QuoteOriginally posted by Gnuff
Thanks AC!

I think i got it now, som settings i also had to chance, now it?s not shown in main anymore

And a thanks to all other who have responded on this tread

perhaps explain what you did
some other ppl perhaps wat that to

 :D

Bounty

Hello how we make the forbiddenfiles to work.

I will have the bot to take the users who shaers preteen and things like that.

Please somebody help with this


Bounty 8)

AlwaysConnected

QuoteOriginally posted by Bounty
Hello how we make the forbiddenfiles to work.

I will have the bot to take the users who shaers preteen and things like that.

Please somebody help with this


Bounty 8)

read here

http://board.univ-angers.fr/thread.php?threadid=958&boardid=18&sid=f1f69f795604e7fd7f3d37c346d25ee5&page=4

Bounty

Hello how we make the forbiddenfiles to work.

I will have the bot to take the users who shaers preteen and things like that.

Please somebody help with this


Bounty 8)

I cant get it to works . I have add preteen and Lolita but nothings happen and I know I have 1 user with preteen .

So please help 8)

AlwaysConnected

*** DC++k CDM V2.74 - 18:21 31/01/2004 ***

Added detection of XDC++ CDM, LuDC++ and SdDC++.
Duplicate IPs now get a red 'C' if in more hubs than there tag shows.
Added multi hub kick. Kicks all users with that IP in all connected hubs.
Bandwidth limit rules now apply to DCGUI.
Added auto force attempt after connection timeout (only works if your an OP).
Added option to hide the CDM tag (always shown if not OP).
Fixed a bug with iDC++ detection

------pfs8500----
http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/DC++k-CDM-v2.74.rar

AlwaysConnected

QuoteOriginally posted by Bounty
Hello how we make the forbiddenfiles to work.

I will have the bot to take the users who shaers preteen and things like that.

Please somebody help with this


Bounty 8)

I cant get it to works . I have add preteen and Lolita but nothings happen and I know I have 1 user with preteen .

So please help 8)
first use the /addforbiddenfile
if you are done
use /sharecheck and /startchecking in the main of the DC++k cdm

See also here

AlwaysConnected

*** DC++k CDM V2.75 - 14:10 01/02/2004 ***

Fixed a bug with unchecked users getting a red C for hub count faking.
Fixed a bug with multi hub kicking an unchecked user resulting in all unchecked users being kicked.
Sorry for these 'small' bugs

----thnx psf8500---

download you copy here

http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/

[NL]trucker

this is the report for the previous version of 2.75


this one doesnt start checking on his own at startup.
it doesnt mark checked user with a green c

and it still looses the settings for the raw commands.
so you,ll have to enter them more then once.

perhaps an idear of putting a save button on it.
Owner of FunnyHub
 
Funyhub.no-ip.info
       Forum Master of


AlwaysConnected

QuoteOriginally posted by [NL]trucker
this is the report for the previous version of 2.75


1 this one doesnt start checking on his own at startup.
2 it doesnt mark checked user with a green c

3 and it still looses the settings for the raw commands.
  so you,ll have to enter them more then once.

perhaps an idear of putting a save button on it.
1 does it at my place
2 it does mark mine user with green C

3 happend to me in earlier version from 2.72 all are beiing saved

small tip ;)
save you Raw commands to a txt file

SMF spam blocked by CleanTalk