Lucifer 6.6.6

[Psycho_Chihuahua]

I can't dowload it

If I'm not wrong, Resources' site is going through some changes.
Maybe bastya can give us more information about that.

Jiten could you re-upload the script here please --> New Upload Place for Lua 5.1 Scripts

Bastya and i setup a new Upload System so that Users with "Scripter Status" can upload without approval through Admins

[jiten]

Jiten could you re-upload the script here please --> New Upload Place for Lua 5.1 Scripts

Bastya and i setup a new Upload System so that Users with "Scripter Status" can upload without approval through Admins

Nice to hear that
First post updated with a new link.

Cheers

[jiten]

First post has been updated with some changes to the main code.

Best regards

[jiten]

First post has been updated with a small change.

[BrotherBear]

Huston we got a problem!!! 

The Command Whisper is Dangerous for those who have a private hub!

The user can use this to PR their own hub whitout Lucifer notice it!

Can you fix it my Friend Jiten ?

Cheers

[jiten]

The Command Whisper is Dangerous for those who have a private hub!

The user can use this to PR their own hub whitout Lucifer notice it!

Can you fix it my Friend Jiten ?

Well, you just need to move Lucifer to the top of the scripts' list.

In this case, place it on top of Whisper's.

[BrotherBear]

The Command Whisper is Dangerous for those who have a private hub!

The user can use this to PR their own hub whitout Lucifer notice it!

Can you fix it my Friend Jiten ?

Well, you just need to move Lucifer to the top of the scripts' list.

In this case, place it on top of Whisper's.

It worked great, phuew, thanks jiten

[BrotherBear]

How to use Lucifer!

If I sett .org as a Control it takes morgon and .net takes Network, Nettan etc.

How should i specify it?

If there is anyone who has a good Lucifer list and would share it I would be happy

Thanks in Advance

[jiten]

If I sett .org as a Control it takes morgon and .net takes Network, Nettan etc.

How should i specify it?

You've set it up correctly.

However, these changes aren't working.
That's probably because the script has already created the file 'tLucifer.tbl' where the all trigs are stored and red from.

Therefore, you must add/remove them directly into/from it.

[TiMeTrAVelleR]

works just fine here  no probs at all

[BrotherBear]

If I sett .org as a Control it takes morgon and .net takes Network, Nettan etc.

How should i specify it?

You've set it up correctly.

However, these changes aren't working.
That's probably because the script has already created the file 'tLucifer.tbl' where the all trigs are stored and red from.

Therefore, you must add/remove them directly into/from it.

Hehe, I think I should have been more specific here

I Don't want Control to take Morgon or Network or anything else I have put in Safe trigs.

Or am I thinking wrong here?

[BrotherBear]

The triggers that is in the Script file (Lucifer6.6.6-build2.131.lua) does not
show up when I run !showtrig adver only the one I created trhough the
rightclick.

Why is it separeted, would it not be better to have only the tLucifer.tbl?

For example. could I delete every trigger that are in the Script and only run
it through the tLucifer.tbl?

Perhaps you could give me a tip how it is ment to work

Thanks in advance.

[Alexinno]

The triggers that is in the Script file (Lucifer6.6.6-build2.131.lua) does not
show up when I run !showtrig adver only the one I created trhough the
rightclick.

Why is it separeted, would it not be better to have only the tLucifer.tbl?

The script create this tLucifer.tbl file because that's where the triggers are saved

For example. could I delete every trigger that are in the Script and only run
it through the tLucifer.tbl?

Perhaps you could give me a tip how it is ment to work

Thanks in advance.

I don't know what's your problem here  ???

[BrotherBear]

Alexinno if you look in the script file begining on row 152 ( -- Advertise Trigs )
there are many triggs already, why use the tLucifer.tbl?

Or why are those triggs not in the tLucifer.tbl ONLY?

What I can se there is triggs in two places or am I thinking wrong!?

[Alexinno]

-- File where the trigs are stored
	fTrigs = "tLucifer.tbl",
	--- Error log file location
	fLog = "Lucifer.log",

like i said before that's where the triggs are saved, if you want more information , you should ask jiten

sorry for this question , but why does this bother you ?
you don't have the space on your hdd drive for it ?

[jiten]

I Don't want Control to take Morgon or Network or anything else I have put in Safe trigs.
Or am I thinking wrong here?

This should clear things up:

• tLucifer["adver"] - contains triggers for which Lucifer takes a profile-specific action;
• tLucifer["safe"] - are the exceptions for the above;
• tLucifer["control"] - contains trigs that are reported to tFeedProfiles without any action being taken;
• tLucifer["site"] - triggers for which tSiteProfiles are checked.

Note that, 'control' triggers aren't related to 'safe' ones.

Alexinno if you look in the script file begining on row 152 ( -- Advertise Trigs )
there are many triggs already, why use the tLucifer.tbl?

Or why are those triggs not in the tLucifer.tbl ONLY?

What I can se there is triggs in two places or am I thinking wrong!?

As Alexxino stated, Lucifer's triggers are stored and red from 'tLucifer' table.

When you run Lucifer for the first time, it uses the default triggers stored in the script [starting on your row 152].

However, when you add/remove a custom trigger, the changed table must be stored in an external file that is 'tLucifer.tbl' file, which is used from that moment on [unless you delete it]. At this point, the triggers stored in the script are of no use.

Then, there'll be 'triggers in two places' but, only one is used [the file].

[BrotherBear]

-- File where the trigs are stored
	fTrigs = "tLucifer.tbl",
	--- Error log file location
	fLog = "Lucifer.log",

like i said before that's where the triggs are saved, if you want more information , you should ask jiten

I know that the triggs are saved there.

The script creates the tLucifer.tbl ONLY if I have added ?triggs not else and the table fills with all of the triggs
that is in the Script.

And I am asking everyone (incl. jiten) ?

sorry for this question , but why does this bother you ?
you don't have the space on your hdd drive fot it ?

It has nothing to do about space

It confuses me a bit, why the Script has the triggers, the triggers could have been in a
table file from the begining ( I Think ) and not in the script.

Because it is easier if you only have one place to look for your triggs

Example:
If I delete a trig that is in the Script and Table, it only disapear in the Table and is still
active as a trigg in the Script.

I know that have difficulties to make my self understandable sometimes, sorry for that

[BrotherBear]

WooW

[BrotherBear]

Oki, My bad, it did not Read from the script after tha Table was created, sorry

[jiten]

Oki, My bad, it did not Read from the script after tha Table was created, sorry

You shouldn't be sorry, as this must've have happened with other users too

By the way, you're right. It's easier and less confusing if there's only one place where the triggers are stored.

In the next update, I'll add the triggers' file [tLucifer.tbl] in the package.

[BrotherBear]

You Are the Man, Thanks jiten

[TopCat]

Hi  jiten,

Thx for the script 

It works great and easy with the mousemenu. Very nice script  ;D

[[HE]Newbie]

Well done Jiten, This script finished my hub. Great keep up that good work ( you all)

[jiten]

First post has been updated with some changes in the code.

[Apocalypse]

hi,Jiten, i need help,please! when i start the script into the hub, the reg users can't send pm, only masters can do it! what is wrong?