PtokaX problems and questions

[MOH]

Hello ! I'm using PtokaX 0.3.3.1 but i'm a newbie and i have same problems !
I'm using Robocop 10.01e ! My OpChat bot dont work !
I read that i have to enable it in the profiles manager !? Where is that profiles manager ?  I have problems with my MOTD ! Its difficult to to be placed in the right place !
Whats for REGISTER ADDRESS in the network sections of the hub !? my last question ;) whats the way my hub to be visible in the public hub lists ?

[(NL)waarom]

you shoot place de motd in the folder cfg you can find int in your ptokax folder.
there you must place the the xml file profiles to.
profiles you wil find in de script folder there is a folder profiles open that then you get a folder PtokaX 16.07 or higher in that folder are the profiles copy the xml file to ptokax cfg folder
good luck

[MOH]

Whats for REGISTER ADDRESS in the network sections of the hub !? I have other problem ! I enabled client info message on connect in robocop it works fine but doesnt work with the USERS ! For the ops, vips and etc. works !

[imby]

Originally posted by MOH
Whats for REGISTER ADDRESS in the network sections of the hub !? I have other problem ! I enabled client info message on connect in robocop it works fine but doesnt work with the USERS ! For the ops, vips and etc. works !

Hi, that is to add hub-list addresses, add these if you want to be on the hublist: dreamland.gotdns.org;vandel405.dynip.com;dcreg.mine.nu;dcinfo.sytes.net;reg.hublist.org;warez.1stleg.com

and select auto register (again if you want to be on the hublist)

With regards to your next question, if i've understood correctly: open up robocop.exe, Go to the 'profiles' tab, under profiles you see a drop down where you can select each profile. Go through each profile and tick 'enable client info message on connect' for each profile that you desire. After that close robocop, go to ptokax > script editor, and press 'restart scripts'.

[MOH]

Here my new questions  :]
I registered in //www.hublist.org but it shows that my hub is offline ? Do i have to se some script ?

in my REGISTER ADDRESS i typed HTTP://www.hublist.org/PublicHubList.xml.bz2 but my hub dont appers in the list of the hubs ? whats the way to do this ???

[imby]

Originally posted by MOH
Here my new questions  :]
I registered in //www.hublist.org but it shows that my hub is offline ? Do i have to se some script ?

in my REGISTER ADDRESS i typed HTTP://www.hublist.org/PublicHubList.xml.bz2 but my hub dont appers in the list of the hubs ? whats the way to do this ???

I've just explained what goes in the REGISTER ADDRESS above yet you've completely ignored it. HTTP://www.hublist.org/PublicHubList.xml.bz2 goes in your DC++ client only and is used to download the hublist. No you don't need to use a script for that, as long as you've done what I said, and keep your hub online, you should be without problems (in most cases).

[imby]

With regards to your last questions, in short you need to get people rating your hub to get on the hublist. Once you around 20 votes you should get on there.

[kash?]

what's cmd to add user in ptokax 0.3.3.1

[kunal]

its
!addreguser nick password profile name

[kash?]

hmm...I know it dude but it was not working
that's why I was asking :P
still any other cmd ??

[kunal]

wat error do u get