just learned its not released....to bad
there no multi servers free ?
for use or testing ??
can use some tips...hate to find out stuff to late
lolz test multi terminated..
until ...i hear something :)
..newbie ...:P
just starting to get the hang of this
compliments for the ptokax !! nice job :)
ps.solly for the bad english hehe
still smoking ...
here it is
Y-hub ptokax NMDC and more multihub chat (http://home.planet.nl/~feer0011/ptokax/myc.zip)
if some one can write a good readme file in english
post it here and i will give it to motta
Greeets AC
thxx m8 going to try this one
ps.
are there more hubs running this one ?
I'm gona'keep on asking :))
need to learn more ...
thxx again ,
I don't know the one from Y-hub, but i do have the one for ptokax!
-Troubadour-
our network is using multihub , we found it on a french site , just search for "ptokax multihub server" on //www.google.com and u will find it.
I found it 08.10.2003 on the old ptokax site at http://ptokax.times.lv/
-Troubadour-
QuoteOriginally posted by Masterload
thxx m8 going to try this one
ps.
are there more hubs running this one ?
I'm gona'keep on asking :))
need to learn more ...
thxx again ,
its work on all hubs
max 15 hubs
i will make some screen caps
Ok the explain op MYC
1 Set up the programm like this
(http://home.planet.nl/~feer0011/multihub/multi1.gif)
Enter the HUB ip you can tot connect
Enter the port of the hub
Enter the pass (must be OP)
Enter the perfect that shows up in the hub
2 Set the OP name and OPchat
(http://home.planet.nl/~feer0011/multihub/multi2.gif)
Botname
MYC = the OP in the hub for connection
OpChat , if you set in all hubs the smae name for OpChat it will be also multihub
3 Check activitielog
(http://home.planet.nl/~feer0011/multihub/multi3.gif)
In here you can see if the logon is good
---------------------------------------------------
so three things to do
1 make an OP in your hub with a pass
Like name= MYC and pass=myc
2 setup the programm seee above
3 have a nice multihub chat
4 push connect
note : it says connection the whole time
Question ask me or -=Motta=- he made it
thxx going to try this one :P
Hello,
I'vre tried the program, it works nice, somethimes it becomes a liitle messy in the mainchat :)
I hope there will be a tool in the future to also have multi users/share between the hubs.
[NL]MrBuitenhuizen
QuoteOriginally posted by MrBuitenhuizenJunior
Hello,
I'vre tried the program, it works nice, somethimes it becomes a liitle messy in the mainchat :)
I hope there will be a tool in the future to also have multi users/share between the hubs.
[NL]MrBuitenhuizen
to get rid of the messy in main chat
config your pefixes for the the hub right :D
multishare/user would be a nice future 8o
to get rid of the messy in main chat
config your pefixes for the the hub right ...................
how I can configure it?
Hello,
You can do that under " settings and servers" > "Do not relay main chat containing"
Than it will become less messy, but it's fun to play some hub games with 2 hubs, only the bot in one hub gets all the points :D
[NL]MrBuitenhuizen
whats your bots name now ?
MrBuitenhuizenJunior ???
lol
?(
thxx for the expaination people !
:)
You can do that under " settings and servers" > "Do not relay main chat containing"
.........................
........................
you mean in ptokax?
Hello,
You can change that in the Multihub software that AlwaysConnected is talking about.(see message 2)
----
whats your bots name now ?
MrBuitenhuizenJunior ???
----
The same, only for this Multihub I've the name "MH" for the extra bot.
[NL]MrBuitenhuizen
What are the command to use in the Multihub software that AlwaysConnected is talking about ?
It works fine on Potoakx aswell, but how does it work ?
QuoteOriginally posted by [T-G-T]M@sto
What are the command to use in the Multihub software that AlwaysConnected is talking about ?
It works fine on Potoakx aswell, but how does it work ?
there are no commands in multi y hub chat
it works under y-hub,ptokax,nmdchub,opendc and much more
it works like this
the op sees waht has been typed in the main chat of hub-1
end sends it to hub -2
it also sees what has been typed in the op-chat and sends it to the other hub-2 opchat
QuoteOriginally posted by AlwaysConnected
QuoteOriginally posted by [T-G-T]M@sto
What are the command to use in the Multihub software that AlwaysConnected is talking about ?
It works fine on Potoakx aswell, but how does it work ?
there are no commands in multi y hub chat
it works under y-hub,ptokax,nmdchub,opendc and much more
it works like this
the op sees waht has been typed in the main chat of hub-1
end sends it to hub -2
it also sees what has been typed in the op-chat and sends it to the other hub-2 opchat
Is it only for Operators then ? or can the "Normal" users read it to ?
QuoteOriginally posted by [T-G-T]M@sto
QuoteOriginally posted by AlwaysConnected
QuoteOriginally posted by [T-G-T]M@sto
What are the command to use in the Multihub software that AlwaysConnected is talking about ?
It works fine on Potoakx aswell, but how does it work ?
there are no commands in multi y hub chat
it works under y-hub,ptokax,nmdchub,opendc and much more
it works like this
the op sees waht has been typed in the main chat of hub-1
end sends it to hub -2
it also sees what has been typed in the op-chat and sends it to the other hub-2 opchat
Is it only for Operators then ? or can the "Normal" users read it to ?
the main chat is for all
the opchat ifr only for ops :)
if you want to use the opchat
the opchat name must be in all hubs have the same name :P
Nice!! :)
I like it alot
Hia:))
Like this a lot and its fun too :))
Is there a way to have just ONE OP-chat window??
If i Am connected to 3 hubs i have 3 windows that popp's up. I know that i can minimize all but one but its have been better if there was just one.
Z ya and tnx 4this nice tool
Hmm ok
just wanna tell u all that there is a beta 1.5 out now
Z ya
I do like it exept for one thing...
that is
after a while it will start to show everyone
status messages when people log in :S
Hia :))
use filters kepp, it works.
If u want help with that, paste in here what it shows and i maybe can help.
Z ya
QuoteOriginally posted by MrZ
Hia :))
use filters kepp, it works.
If u want help with that, paste in here what it shows and i maybe can help.
Z ya
nice idea put some screen captures in here :D
[16:51] *** Connecting to theabyss2.no-ip.org...
[16:51] *** Connected
[16:51] Den h?r hubben k?r PtokaX DC Hub 0.3.2.6 TestDrive 4 (UpTime: 1 hours, 17 minutes)
[16:51] *** Stored password sent...
I don't know why ^^ is repeating itself
from the other hub and vica verca...
i didn't copy this when it was in action.
But exactly the same message all over again from the other hub
Hia:))
I would if i could, AlwaysConnected, pls teach me :))
But in this case i dont think i has helped kepp, that msg should been filtered by default.
Kepp us could try put a filter under "Do not relay main chat containing" and use this : Starting with '***' and maybe also filterering this (also this is in by default) :
Think its trial and errors that makes the worls go round, but pls ceep on posting here as im just a nebie in this too and we could make this happening :))
With a help from AlwaysConnected i could post some sreen shoot too :))
Z ya and l8r pal
edited:
trying to get on ur hub, i would suggest that u filter out on the side ""Do not relay this users in main chat" and put in <-Abyss-> in one of those boxe's..g-luck man :))
Where can I download this I cant find that
I found it 08.10.2003 on the old ptokax site at http://ptokax.times.lv/ ?(
download link to myc is dead :/
and the site is SLOOWWWW!!! :D
someone who has MYC ??
http://www.ibscgroup.altervista.org/varie/myc1_20.zip
! use save as to save !
tnx =)
(http://hub-link.sourceforge.net/images/DCHL%20Logo%20small.gif)
Hub-Link v1.03 *Beta 3* is now available for download through Sourceforge:
http://hub-link.sourceforge.net (http://hub-link.sourceforge.net)
http://sourceforge.net/project/showfiles.p...ckage_id=107867 (http://sourceforge.net/project/showfiles.php?group_id=91001&package_id=107867)
*Beta 3* includes Support Scripts for Neo-Modus and SDCH Hubs.
Scripts are planned for PtokaX, OpenDCHub and SBHub
Multi-Hub Chat has been tested with NMDC, SDCH, PtokaX, Y-Hub, SBHub, Ryalth, VerliHub and X-Hub