I usually don't have this problem because my hub is a reg. hub only, must have Nick and pass i issue to enter.But yesterday someone entered the hub(dont know how) with a 0 share. I have the min share set to 2 gigs.
I did a kick and kicked him out, finally had to do a nickban on him. I am a beta tester and am using 330 25 beta as of now. I was wondering if their is a script that would prevent people from using fake sharers and other means to enter a hub, even a private hub if they do not meet the hub requirements. My settings are correct and am trying to figure out how he did it cause it kinda pissed me off. He is a new member i gave an account too a couple of weeks ago. Can anyone give me a hand with a script that would work 100% ? I have my profiles below that i use in my hub. I would like to be able to turn it off on certain users,(exempt like ops ) when and if neccessary.
Just would be nice to be able to enter a nick that could bypass the script. and the Master be the only one that could do it.
My profiles:
0|Master|11111111111111111111000000000001
1|Operator|11111100011001111111000000000000
2|VIP|10000000000001111100000000000000
3|Reg|10000000000000000000000000000000
4|REG2|00000000000000000000000000000000
5|REG3|00000000000000000000000000000000
6|OP1|11111100010110000100110000000001
7|superop|10101110100000000000000000000000
8|superviser|11111111111111111100000000000001
9|REG1|10000000000000000000000000000000
10|trustedmember|11110100000000000000000000000000
If someone could help me i would appreciate it. It really pissed off alot of the members for someone to be able to do this.
Thnx in advance
X
Hmm from what i can see. its a problem in ur profiles? No way he can buy pass ur min share that is set in hub setting.
For each profile>> go to profile manager and see if the no share limit option ticked or not. If its ticked for ur registered or other user profiles, he might have got in with it. Again since its u who is registering someone with a nick and pass, i am not sure how he or she got into ur hub.
Do u have a firewall on ur hub server? is it upto date? any loop hole in ur computer settings?
I am really doubting ur profile setting, see if his name is in the registered user's list?
This member is a "Reg" member which is one of the default member profiles of the PtokaX software, and this profile does not have the no share limit, no slot limit ect......checked. I have the other profiles also each with certain things checked. I had a problem similiar to this a long time ago, that is one of the main reasons i "privatized" my hub to reg members only. In "theory" the profile he is in, he should have been checked for a share,but somehow he got around it. I am trying to find out how he did it, if i do i will let some of u know by pm. This twat will never be in my hub again. Just trying to ensure that no one else can do it.
E D I T E D : I FIGURED IT OUT. HE USED A CLIENT CALLED DC STEALTH SO I PROBABLY JUST NEED A LITTLE SCRIPT TO CHECK FOR THIS CLIENT. I DONT KNOW HOW IT CAN BE DONE THOUGH CAUSE YOU CAN TELL IT TO APPEAR AS ANY VERSION OF DC++ YOU LIKE.
try this client out and KILL the Stealths :))
DC++K CDM (http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/)
Will try, thnx for the tip, much appreciated.
Ok, i tried the Dc++k CDM client. I tested it against the Stealth Dc++..........i got a friend on the hub to help test. Everytime he came in the hub I would get disconnected. I am the hubowner with Master status. Tried several times, but like i said every freakin time he came in the hub ---> I <---- got disconnected. I went back to the Dc++k CDM site and looed at their guide. But everything seems to be setup normal, unless the latest version of the Stealth can now get around this detection.
It seemed like the client detected . After i re-entered the hub if i tried to do a file list check.......I would get disconnected again from the hub.
Can somebody please give me a script or some settings for Dc++k CDM that will eliminate this problem so the Stealth client can be detected and blocked from entering the hub? This is getting me so pissed off with these people useing this client, nothing seems to be able to stop it.
Do you have the option Check on OPs, active ???
Figured it out.....the syntax in the RAW command was off, didnt dot all the T's and cross all the i's lol.....working fine now. Thnx for you guys help , much appreciated.