Hello.. I request very difficulty script [my opinion :P]
yhub with command !ui .. have this information:
General information:
User: xxxxx (Currently: Online)
Profile: OP (Permanent)
Comment:
Level: Operator
Current IP: 213.140.6.111 (Connected: 12/13/2004 1:00:27 PM)
Times kicked: 0
Muted: No
Sharesize: 0 GB (Limit: 0GB)
Exact sharesize: 0 bytes
Description: <++ V:0.404,M:P,H:0/0/4,S:1>
Has description tag: Yes
Modalit?: P
Hubs User: 0
Hubs Vip: 0
Hubs Operator: 0
Slots: 1
Version: DC++0.404
IP History:
213.140.6.111 From: 12/13/2004 1:00:27 PM To: Still connected
213.140.6.111 From: 12/13/2004 12:51:29 PM To: 12/13/2004 12:54:16 PM
213.140.6.111 From: 12/13/2004 11:13:37 AM To: 12/13/2004 12:49:06 PM
213.140.6.111 From: 12/12/2004 4:46:44 PM To: 12/13/2004 2:50:51 AM
213.140.6.111 From: 12/12/2004 1:18:48 PM To: 12/12/2004 4:44:47 PM
213.140.6.111 From: 12/12/2004 4:07:20 AM To: 12/12/2004 4:38:19 AM
213.140.6.111 From: 12/11/2004 12:02:54 PM To: 12/12/2004 12:13:01 AM
213.140.6.111 From: 12/11/2004 12:09:13 AM To: 12/11/2004 3:00:22 AM
213.140.6.111 From: 12/10/2004 10:36:22 AM To: 12/10/2004 11:09:33 PM
213.140.6.111 From: 12/9/2004 4:34:16 PM To: 12/10/2004 2:37:02 AM
213.140.6.111 From: 12/9/2004 4:28:11 PM To: 12/9/2004 4:34:04 PM
213.140.6.111 From: 12/9/2004 1:44:44 PM To: 12/9/2004 4:17:38 PM
213.140.6.111 From: 12/8/2004 10:36:51 PM To: 12/9/2004 4:18:54 AM
213.140.6.111 From: 12/8/2004 2:08:53 PM To: 12/8/2004 10:36:39 PM
is it possible for PtokaX?
With command !ui I have all information [all] of user and all login and all disconnect with all ip [idea: this information load of user.mdb]... Is it possible? thanks ^__^
thats the same stuff what PX inbuild command does (!ipinfo and !userinfo )
And if robocop has a command !info , then im sure, there are other scripts that does that
==========================
? Show Info ?
==========================
? User Name: enema
? User Profile: Master
? User IP: xxx.xxx.xx.xxx
? Status: Online
? Client: DC++
? Version: 0.40325
? User iVersion: 1,0091
? Descr: [256K/128K] <++ V:0.40325,M:A,H:0/0/5,S:2>
? Mode: Active
? Conn: Cable
? E-Mail: None
? Tag Status: Ok
? Kicked: No kicks
? bWho: None
? Reason: None
? Warned: No warnings
? bWho: None
? Reason: None
? Away Mess: No message
? Connected at: 12/14/2004 08:07:39
? Total Time: 0 months, 1 days, 14 hours, 8 minutes.
? Session Time: 14 min
? Share: 36.26 GB
? Hub(s) as Regular user: 0
? Hub(s) as Registerd user: 0
? Hub(s) as Operator: 5
? Open Slots: 2
? Upload limit: Unlimited
Yes, is it OK.. but.. I don't use Robocop [is it not good.. my opinion] and I search script with this chatacteristic and with all login, all logoff with all ip in hub [this information... idea: load of user.mdb]... is it possible? Thanks a lot