hello to all of you
recently i bought a new router
the router model is~ " level one FBR-1407A"
in a hard way i set it up cause i m holy new with routers
and couldn t figure out it,
anyway finally i made it and i m online with the new router
but now i have a problem,i m in the net with firewall
and when i m opening DC++ i have to go Passive to download,but i don t want that,i wanna be "Active"
in DC.does anyone know this router so will help me set this baby up???
and an another problem is that i might run my hubg sometime,or open and FTP server so i can t do these =/
plz someone_!!
Ok, within the router setup (normally thru a web interface) you should see a sub-menu called 'PORT FORWARDING' or something similar. Within this you should be able to forward certain ports to certain machines on your network (im assuming you have more than 1 pc as you have a router)
For the Pc that you are using Dc++ with, enter a port number (ie 8001 for 192.168.1.xxx) then in Dc++ settings enter that same port in the port box, using your external ip address not the 192.168.1.xxx
okey i'll try to guide you...
If your Router is somehow managable by Telnet,WEB based or any other way?
You need to Port Forward it mean the outside port of the router will be the same as the internal port!
Outside IP + port = internal IP+port
it will result in forwarding any incoming request to PORT from the internet FORWARDED to the internal IP.
In the Active section:
put in the PORT (emtpy=random)
(what ever you want) something like 3800,666,545...Be carefull not to put used port like 80 or 139...ect' ?(
In the IP: leave it empty
(http://img.photobucket.com/albums/v509/BoJlk/DCDM_ActiveSettings.jpg)
/edit
Damn you n1ck you beat me to it! :D
Yes - but yours looks better lol
thank you all
and marry christmas y the way
i finally found this baby router =)
have a nice holydays my firneds