Print Page - PtokaX problems and questions

Title: PtokaX problems and questions
Post by: MOH on 05 July, 2005, 19:11:53

Hello ! I'm using PtokaX 0.3.3.1 but i'm a newbie and i have same problems !
I'm using Robocop 10.01e ! My OpChat bot dont work !
I read that i have to enable it in the profiles manager !? Where is that profiles manager ? I have problems with my MOTD ! Its difficult to to be placed in the right place !
Whats for REGISTER ADDRESS in the network sections of the hub !? my last question ;) whats the way my hub to be visible in the public hub lists ?

Title: PtokaX problems and questions
Post by: (NL)waarom on 05 July, 2005, 19:18:48

you shoot place de motd in the folder cfg you can find int in your ptokax folder.
there you must place the the xml file profiles to.
profiles you wil find in de script folder there is a folder profiles open that then you get a folder PtokaX 16.07 or higher in that folder are the profiles copy the xml file to ptokax cfg folder
good luck

Title:
Post by: MOH on 05 July, 2005, 22:49:50

Whats for REGISTER ADDRESS in the network sections of the hub !? I have other problem ! I enabled client info message on connect in robocop it works fine but doesnt work with the USERS ! For the ops, vips and etc. works !

Title:
Post by: imby on 06 July, 2005, 01:04:59

QuoteOriginally posted by MOH
Whats for REGISTER ADDRESS in the network sections of the hub !? I have other problem ! I enabled client info message on connect in robocop it works fine but doesnt work with the USERS ! For the ops, vips and etc. works !

Hi, that is to add hub-list addresses, add these if you want to be on the hublist: dreamland.gotdns.org;vandel405.dynip.com;dcreg.mine.nu;dcinfo.sytes.net;reg.hublist.org;warez.1stleg.com

and select auto register (again if you want to be on the hublist)

With regards to your next question, if i've understood correctly: open up robocop.exe, Go to the 'profiles' tab, under profiles you see a drop down where you can select each profile. Go through each profile and tick 'enable client info message on connect' for each profile that you desire. After that close robocop, go to ptokax > script editor, and press 'restart scripts'.

Title:
Post by: MOH on 07 July, 2005, 02:56:42

Here my new questions :]
I registered in //www.hublist.org but it shows that my hub is offline ? Do i have to se some script ?

in my REGISTER ADDRESS i typed HTTP://www.hublist.org/PublicHubList.xml.bz2 but my hub dont appers in the list of the hubs ? whats the way to do this ???

Title:
Post by: imby on 07 July, 2005, 03:59:52

QuoteOriginally posted by MOH
Here my new questions :]
I registered in //www.hublist.org but it shows that my hub is offline ? Do i have to se some script ?

in my REGISTER ADDRESS i typed HTTP://www.hublist.org/PublicHubList.xml.bz2 but my hub dont appers in the list of the hubs ? whats the way to do this ???

I've just explained what goes in the REGISTER ADDRESS above yet you've completely ignored it. HTTP://www.hublist.org/PublicHubList.xml.bz2 goes in your DC++ client only and is used to download the hublist. No you don't need to use a script for that, as long as you've done what I said, and keep your hub online, you should be without problems (in most cases).

Title:
Post by: imby on 07 July, 2005, 04:01:42

With regards to your last questions, in short you need to get people rating your hub to get on the hublist. Once you around 20 votes you should get on there.

Title:
Post by: kash? on 07 July, 2005, 11:48:59

what's cmd to add user in ptokax 0.3.3.1

Title:
Post by: kunal on 07 July, 2005, 12:14:13

its
!addreguser nick password profile name

Title:
Post by: kash? on 07 July, 2005, 18:27:14

hmm...I know it dude but it was not working
that's why I was asking :P
still any other cmd ??

Title:
Post by: kunal on 07 July, 2005, 20:27:32

wat error do u get

PtokaX forum

PtokaX => Support => Topic started by: MOH on 05 July, 2005, 19:11:53