Author Topic: WINDOWS & PTOKAX  (Read 1817 times)

0 Members and 1 Guest are viewing this topic.

Offline Josecar

  • Member
  • ***
  • Posts: 45
  • Karma: +1/-0
WINDOWS & PTOKAX
« on: 08 June, 2005, 19:33:25 »
I'have a problem with Ptokax GUI since my first time: IF you have settled a letter type grater than the default of 96 ppp, say 120, there is no way to see the buttons in Op/bans: new, modify remove.. No way. No enlarging the window, no full window, no nothing. Only return to config of letter of 96 in the display config.

So, if you configure the display say 1280-960 and the letter is too small, you cant put it more de 96 ppp or the potokax GUI won't display those buttons.

May be there is a way, if so, I coud not find it.

sorry de capital letters, wasn't intentional
« Last Edit: 08 June, 2005, 19:36:40 by Josecar222000 »

PtokaX forum

WINDOWS & PTOKAX
« on: 08 June, 2005, 19:33:25 »

Offline Mardeg

  • Forum Ace
  • *****
  • Posts: 75
  • Karma: +7/-1
    • The most bloated human-readable email hider in the world!
(No subject)
« Reply #1 on: 08 June, 2005, 21:18:15 »
I noticed this as well, since the first ptokax version.
Unfortunately it took me 6 months before I realised there were buttons missing, and I worked blind on scripts for that long, since the debug window wasn't visible.. and I kept wondering how others in the forum were able to see when there was an error!
So no, there is no way the bottom buttons can be visible when windows OS settings are higher than 96 dpi (my screen resolution at the time was 1600x1200, so I had to reduce that because 96dpi is ridiculously small on it, even with a 21" screen)

PtokaX forum

(No subject)
« Reply #1 on: 08 June, 2005, 21:18:15 »