Slot / HUB by connection

[Tarokkk]

HI

I need a sdcript pls

I read for this script but i didn't find it.

It is a slot checker with bandwitch by connect

MinSlotDSL = "2"
MaxSlotDSL = "6"
SlotPerHUBratio = "2"

if user have 2 slots and 4 HUBs
than PM >> MinSlotDSL = "2"
MaxSlotDSL = "6"
SlotPerHUBratio = "2"

And the other cennections...

THX

[Tarokkk]

It is possible to make it or not ?  ?(

[plop]

Originally posted by Tarokkk
It is possible to make it or not ?  ?(

yes, a.i. has it but i don't have time 2 build a stand alone version.
channelbot has it 2.

plop

[Tarokkk]

But I would like a stand alone version and It is very

high-pressure


Pls if anybody have a litle time

[kepp]

What exactly do you want, Minimum and maximum of slots for each Connection?

[Tarokkk]

I would like a bit difficult script

MaxSlot_28.8Kbps = "1"
MinSlot_28.8Kbps = "4"
MaxHub_28.8Kbps = "1"
SlotPerHubRatio_28.8Kbps = "2"
Upload_28.8Kbps = "0"

MaxSlot_38.8Kbps = ""
MinSlot_38.8Kbps = ""
MaxHub_38.8Kbps = ""
SlotPerHubRatio_38.8Kbps = ""
Upload_38.8Kbps = ""

MaxSlot_56Kbps = ""
MinSlot_56Kbps = ""
MaxHub_56Kbps = ""
SlotPerHubRatio_56Kbps = ""
Upload

MaxSlot_Modem = "4"
MinSlot_Modem = "1"
MaxHub_Modem = "1"
SlotPerHubRatio_Modem = "2"
Upload_Modem = "0"

MaxSlot_ISDN = ""
MinSlot_ISDN = ""
MaxHub_ISDN = ""
SlotPerHubRatio_ISDN = ""
Upload_ISDN = ""

MaxSlot_DSL = ""
MinSlot_DSL = ""
MaxHub_DSL = ""
SlotPerHubRatio_DSL = ""
Upload_DSL = ""

MaxSlot_Cabel = ""
MinSlot_Cabel = ""
MaxHub_Cabel = ""
SlotPerHubRatio_Cabel = ""
Upload_Cabel = ""

MaxSlot_Wireless = ""
MinSlot_Wireless = ""
MaxHub_Wireless = ""
SlotPerHubRatio_Wireless = ""
Upload_Wireless = ""

MaxSlot_LAN(T1) = ""
MinSlot_LAN(T1) = ""
MaxHub_LAN(T1) = ""
SlotPerHubRatio_LAN(T1) = ""
Upload_LAN(T1) = ""

MaxSlot_LAN(T3) = ""
MinSlot_LAN(T3) = ""
MaxHub_LAN(T3) = ""
SlotPerHubRatio_LAN(T3) = ""
Upload_LAN(T3) = ""

Max slot >> max slot
Min slot >> Minimum slot
MaxHub >> Maximum hubs
Slot/HUB ratio >> e.x. : 2 slot / hub
Upload >> Bandwidh

Thx !!!

And for different clients. e.x. DC++ ; oDC ; DCGUI ......

[Tarokkk]

It is a too difficult script ?

[plop]

Originally posted by Tarokkk
It is a too difficult script ?

not diffecult just a lot of work, might be better if you use channelbot/gecko for the mean time.
altho i don't know if kepp is working on it.

plop