Mean_Machine

[night_hawk]

sounds cool but this newbie going to need a lot of training.....lol....

[BeeR]

Originally posted by Snowman
Thanks guys... I am currently ALMOST done with a total rewrite of the login part of the script...
The new part include seperate settings for all userlevels on all parts:
Client types can be different for all...
Client versions can be different for all...
Maximum number of hubs can be different for all...
Minimum slots can be different for all...
Maximum slots can be different for all...
Share can be different for all...
& Slots/hub ratio can be different for all...

It will support controlling of DC++, oDC, DCGui & zDC for now.


Snowman

Now i get real exited..............

I'll hope it wont be long untill i get my hands
on the new M_M

[MrZ]

Hiaa :))

still have some of these:

stack traceback:
   1:  function `OnTimer' at line 3510 [file `G:\Wurlitzer\scripts\Mean_Machine.lua']

Syntax error: bad argument #3 to `strfind' (number expected, got nil)
stack traceback:
   1:  function `strfind' [C]
   2:  function `dodccheckonconnect' at line 1151 [file `G:\Wurlitzer\scripts\Mean_Machine.lua']
   3:  function `NewUserConnected' at line 1100 [file `G:\Wurlitzer\scripts\Mean_Machine.lua']


Z ya

[Snowman]

MrZ:
Ehm... Bad timing
I already made so many changes to the script that it will be "Mission Impossible" to find those errors )
Hope you can manage until the new version is online.


Snowman

[MrZ]

Hehe

ooh yeaa we can, thoose errors been there a loong time and reported here some times b4.

So just hope they will be gone after the new one :))

Seeing 4wards to it

Have been thinking (and forgotten inbeween) about an option to the !wanted command, , a "reason"

like !wanted MrZ sharing porn

As it is now we dont know why they are wanted, they can even have fixed their share afterwards and came back and still be in the list. Good to know :))

Z ya and Good Luck Buddy :))

[MrZ]

Hiia again

I just got to think about that if i type !help in MM window it shows up in main, , can we get rid of that so it wont shows up in main ?

Z ya

[Snowman]

MrZ:
I must admit I made it do so on purpose so other users could see exactly how the command was. It does not show any switches, only the main command.
But if you want it hidden then I'm ok with that


Snowman

[MrZ]

hehehe :))

ok Snowman, or just tel me were it is and what to change i can do it myself if ya not wanna do a on/off switch for it,,,

Z ya bud :))

[Snowman]

MrZ:
Just find the following line
SendToAll("<"..user.sName..">".." !help")
and delete it.

BTW!
The rewrite of the script is a MUCH bigger task than I thought at first...
The following is SOME of the changes that will be present in the next version:
MORE than 180 commands ONLY for settings. It's VERY adjustable now
New customizable commands. It will be possible to change the name of some commands.
I even thought about making it possible to change ALL commands... What do YOU think here?

TRANSLATORS:
I have thought about a total clean-up in the language file AND at the same time make it possible to do a FULL translation... Including help and so on...
HOWEVER... I don't want to make translators work overtime... IF I do the above then completely new translations will be needed... Should I do it?


Snowman

[Snowman]

MrZ:
Oooops...
That smiley was an accident :)
Here is the correct line:
SendToAll("<"..user.sName..">".." !help")


Snowman

[sander815]

i just installed a new version of ptokax, with mean machine, but when i do a !banip ip i get Access violation at adress 00557161 in module ptokax.exe. Write of adress 00000025.

And no ip adres gets in the banlist

[night_hawk]

what does this mean  A user with an IP belonging to NTL Network Management Centre part3 just tried to enter the hub. some info pleae

[Pedro]

you have peer guardian in mean machine set to tell you when someone in the banlist has tried to axx your hub.

In this case NTL Network Management Centre part3 tried to axx your hub and they are not allowed.

You can toggle this with command  !setipguard num

num = 0 off
           1 on in silent mode(you will not recieve a message telling you)
           2 on with a message telling you in main chat( like the message that you posted)
           3 on with a message to ops only
           

I hope this helps you m8

[night_hawk]

ok but what is it ... is it the irra

[night_hawk]

i have a user that uses Macintosh direct connect 1.1.0

is there a way he can get in macs pc are not the same as reg pc's and some of my best users can not get in the hub..

please tell me what to do to set him up ty

[night_hawk]

i got it fixed for now just turn off odc/dc++ for now since i am a private hub fackers can not get in...But if you can write it into the programs to let mac user enter the hubs please....thank you

[sander815]

Originally posted by sander815
i just installed a new version of ptokax, with mean machine, but when i do a !banip ip i get Access violation at adress 00557161 in module ptokax.exe. Write of adress 00000025.

And no ip adres gets in the banlist

any1? seems like ptokax is doing this...as its the same with mean machine as script

[MrZ]

Hiaa:))

sander815, , try turn off MM and see if the problem still exist..


Z ya

[Snowman]

sander815:
I must admit I never saw this access violation before but I THINK I read something about it somewhere... Can't remember where though...

night_hawk:
I will gladly make it possible for Mac users to gain access but I need some client descriptions that I can tell the script to search for. Get me those and they are in
Regarding the IP blocked... I can't tell you who they are AND I also know that the list from PeerGuardian is not 100% accurate but it was the best way to add security to the script. All they can see is that they are blocked as it is a private hub. They are not told they are banned.


Snowman

[night_hawk]

client descriptions ok where do i get that and i will get it for you

[Snowman]

night_hawk:
You must go into PtokaX under "Users and chat" and set "CMDs" in the bottom to active...
Then you must have a user with the Mac client to login and you will see what his/her client reports to PtokaX in the big "Admin's chat" field. Copy it and send the info to me.


Snowman

[night_hawk]

ok the tag wall i will do that for you when he logs on thank you very much

[BeeR]

Hellou Snowman [=

Is the project progressing OK??

think this might be a killer when its finnieshed  0:

Cya

[night_hawk]

your time bot needs to be fixed

Today is Monday 1. Marts 2004 and the local time at    -----says Marts instead of March

[Snowman]

night_hawk:
hehe... It's not my tagwall that's the problem but my spelling in the language.dat file... Sorry about that one :)

BeeR:
Well it IS progressing but a bit slow... I have already rewritten more than 2000 lines of code and need to rewrite at least 6000 more...

I can give you all a little peak at the new settings options and commands.
Here is a list of Master specific settings.
Such a set is made for all levels. Owner's is a lot smaller though.


MASTER SETTINGS:
 !set master check dcgui          Sets DCGui check to off or on. This one overrides all the settings marked .
 !set master check dcp          Sets DC++ check to off or on. This one overrides all the settings marked .
 !set master check ip          Sets if it's allowed to have more than one connection from the same IP.
 !set master check odc          Sets oDC check to off or on. This one overrides all the settings marked .
 !set master check share          Sets if share should be checked. This setting overrides the setting marked .
 !set master check zdc          Sets zDC check to off or on. This one overrides all the settings marked .
 !set master client dcgui          Sets if this clients can be used. This setting overrides all settings marked .
 !set master client dcp          Sets if this clients can be used. This setting overrides all settings marked .
 !set master client odc          Sets if this clients can be used. This setting overrides all settings marked .
 !set master client zdc          Sets if this clients can be used. This setting overrides all settings marked .
 !set master help               Shows these help lines.
 !set master info               Shows a list of all current settings for Masters.
 !set master join             Sets if parts & joins shall be shown to the public.
 !set master max hubs       Sets maximum number of allowed hub connections at one time.
 !set master max slots          Sets the maximum number of slots allowed.
 !set master min dcgui          Sets the minimum version of DCGui allowed.
 !set master min dcp          Sets the minimum version of DC++ allowed.
 !set master min odc          Sets the minimum version of oDC allowed.
 !set master min slots          Sets the minimum number of slots allowed.
 !set master min slotshub       Sets the minimum number of slots required.
 !set master min zdc          Sets the minimum version of zDC allowed.
 !set master msg             Sets if messages from the Bot should be shown in a PM window from the Bot or as a PM in Main Chat.
 !set master passive          Sets if passive clients is allowed in the hub.
 !set master redirect          Sets if redirect of users is allowed.
 !set master share             Sets minimum share.
 !set master show rules          Sets if rules shall be shown on logon.
 !set master limiter          Sets if speed limiters is allowed and what speed is minimum. 1 - 999999 is allowed. Value is KBytes/sec.  

There is also some general settings...
The script will be divided into a few sub-scripts to make it more update-friendly also.


Snowman