- RoboCop v4.0 - Testdrive 3 or Higher!

[LoTeK_]

I don't understand the command protection tables..can someone explain me something about it? many thanks..

[blackwings]

Originally posted by LoTeK_
I don't understand the command protection tables..can someone explain me something about it? many thanks..

For example, you go to Netfounder-> Protection. What you now see is what Netfound should be able to do against all the profiles. Should Netfounder for example be able to Ban a master, if not, uncheck the second box under master.

[LoTeK_]

thank u very much :-)

i'm testing the antiadvertising, and it's not working.

I've enable it against user and regs, but if a normal user type in something, the bot doesn't kick.
i've tryed no-ip.org .com servemp3 serverbeer and nothing, this was a problem of the robo 8b also..that i forgot to post.

[BoJlk]

Yeap no reaction to the advertising
no cick/ban/warn...

thou enabled on the REG users...

[SaintSinner]

if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

[Optimus]

I've enable it against user and regs, but if a normal user type in something, the bot doesn't kick.
i've tryed no-ip.org .com servemp3 serverbeer and nothing, this was a problem of the robo 8b also..that i forgot to post.

I tested it and it's working here, so ok shit happens hehe.
Lets have a look, if you type no-ip.com  in mainchat/PM there will be no reaction. But when you type itsucks.no-ip.com the bot will react and disconnect the user. It's a new and better way.

You have a try, or get back to me about it

Greetingz Optimus  

[Optimus]

if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

I haven't be able to reproduce the bug, but it probably a missing file.

MISSING FILES:

There are some issieus about unzipping the ScriptPackage, please use WinRar.
Other there will be the change that there are folders missing!!!!!!!!

[Madman]

WinAce works fine to =)

[LoTeK_]

yeah!! the advertise is working well..!! u are a genius!! LOL

[[=robbase=]]

edit! ..

[uffetjur]

still miss the "clean out non active regged users part in Robocop, hope you can add it

[Cyberia]

Originally posted by SaintSinner
if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

Maybe it has something to do with some special characters. Do you also have problems if you place only a simple text in the admessage.txt file?

[[DM]Razor?]

Originally posted by Cyberia

Originally posted by SaintSinner
if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

Maybe it has something to do with some special characters. Do you also have problems if you place only a simple text in the admessage.txt file?

I get the same error, and there is nothing writtin in the field when this occurs...

[BoJlk]

It works like a Charm...
You Right it is a better way to do it!

[Cyberia]

Originally posted by [DM]Razor?

Originally posted by Cyberia

Originally posted by SaintSinner
if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

Maybe it has something to do with some special characters. Do you also have problems if you place only a simple text in the admessage.txt file?

I get the same error, and there is nothing writtin in the field when this occurs...

Can you check the properties of the admessage.txt and disclaimer.txt file, and make sure the read-only property is unchecked.

[Optimus]

Originally posted by SaintSinner
if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

I can't reproduce this bug at the moment tryd various of things to get it broken but without luck. So i hope you guys find me a clue how to solve it hehe. Thanks

[[DM]Razor?]

Originally posted by Cyberia
Can you check the properties of the admessage.txt and disclaimer.txt file, and make sure the read-only property is unchecked.

They are unchecked yes

[Cyberia]

Originally posted by [DM]Razor?

Originally posted by Cyberia
Can you check the properties of the admessage.txt and disclaimer.txt file, and make sure the read-only property is unchecked.

They are unchecked yes

Think I found it guys. Executable crashes when admessage.txt and disclaimer.txt is empty.
edit the files with notepad and insert some text like
blablabla
then save it and run the robocop.exe again.

   lol

[[DM]Razor?]

Originally posted by Cyberia
Think I found it guys. Executable crashes when admessage.txt and disclaimer.txt is empty.
edit the files with notepad and insert some text like
blablabla
then save it and run the robocop.exe again.

   lol

lmao... dident work  

But same thing also happens when clicking from master rules to user rules and visa versa.. and from netfounder and to reg.. Happens everywhere when i click the taps

[Cyberia]

Originally posted by [DM]Razor?

Originally posted by Cyberia
Think I found it guys. Executable crashes when admessage.txt and disclaimer.txt is empty.
edit the files with notepad and insert some text like
blablabla
then save it and run the robocop.exe again.

 :D  lol

lmao... dident work  :D

But same thing also happens when clicking from master rules to user rules and visa versa.. and from netfounder and to reg.. Happens everywhere when i click the taps

Yups, but i think also the other files are empty ones.
edit them also with notepad rulesfounder.txt rulesmaster.txt etc.
bug in exe, fixed in next release. lol

[[G-T-E]Gate?]

To get the problem solved just open the admessage.txt file (and I dont mean thru the GUI) and add something like "Welcome" then save it. Now Go to ur PTx GuI And check syntax and restart scripts, then open ur RCv9b GUI and go to the messege section and try. It will be ok now.

Greatings G8


Originally posted by [DM]Razor?

Zitat:
--------------------------------------------------------------------------------
Originally posted by Cyberia

Zitat:
--------------------------------------------------------------------------------
Originally posted by SaintSinner
if i click on the Admessage tab then click on disclamer the prog will shut down with an error message
title of the box is "project 1" and message is "runtime error 5, invalid procedure call or argument.

--------------------------------------------------------------------------------



Maybe it has something to do with some special characters. Do you also have problems if you place only a simple text in the admessage.txt file?

--------------------------------------------------------------------------------



I get the same error, and there is nothing writtin in the field when this occurs...

[Cyberia]

yups [G-T-E]Gate? that's just the problem.
fill in something and the problem is fixed.
gui have problems loading a empty file

[[G-T-E]Gate?]

Glad to hear it solved the problem for the time being untill the GUI gets repaired.
A smile is worth a thousand words.  :D
G8

[Optimus]

Thanks guys no Update tonight gone try to fix this bug first hopefully tomorrow guys

Big smile for G-T-E

[Optimus]

Bug Fixed lOOOl

Thx alot