PtokaX forum

Development Section => PtokaX Development Versions => Topic started by: PPK on 19 September, 2006, 18:42:10

Title: PtokaX UDP-Debug Receiver
Post by: PPK on 19 September, 2006, 18:42:10
This is small app to receiving debug information from PtokaX, download it here (http://www.PtokaX.org/files/PX-UDP-DBG-RECV-2.2.1.7z)  8)
Title: Re: PtokaX UDP-Debug Receiver
Post by: -SkA- on 19 September, 2006, 19:59:52
With this app I will finally understand why ptokax beta crashes?  :o
Title: Re: PtokaX UDP-Debug Receiver
Post by: PPK on 19 September, 2006, 20:23:19
Maybe... and maybe not, but maybe few last lines before crash will help  ::)
Title: Re: PtokaX UDP-Debug Receiver
Post by: -SkA- on 20 September, 2006, 08:03:15
I have an hub running on tcp port 888 and udp port 889.

I have tried using this application on port 889 but it gives this error: 07:57:49 - *** UDP Socket bind error: 10048.   If I set port 888 it runs but it doesn't show anything.
Title: Re: PtokaX UDP-Debug Receiver
Post by: PPK on 20 September, 2006, 15:32:33
RTFM ! It is only 5 lines shown in this app after start ...
Title: Re: PtokaX UDP-Debug Receiver
Post by: 7P-Darkman on 15 October, 2006, 04:35:29
Hello PPK,

Congratulations for the excellent tool.. are being very useful me, to solve some problems in my HUB.

I have ones questions:

1. It is possible to know who is monitoring my HUB with it? some command for this?
2. In case that I want, is possible to unsubscribe some connection for this tool, that has been opened for another person? some command for this?

Respectfully,

7P-Darkman

Posted on: 11 October 2006, 17:07:51
Zzzzzzzzzz.....
Title: Re: PtokaX UDP-Debug Receiver
Post by: bastya_elvtars on 15 October, 2006, 12:15:47
Hello PPK,

Congratulations for the excellent tool.. are being very useful me, to solve some problems in my HUB.

I have ones questions:

1. It is possible to know who is monitoring my HUB with it? some command for this?
start - run - cmd /k netstat -an
Title: Re: PtokaX UDP-Debug Receiver
Post by: 7P-Darkman on 15 October, 2006, 17:01:30
start - run - cmd /k netstat -an


Thanks Bastya...

But it wanted to know if the tool offers this option... I am thankful for answering.

Respectfully,

7P-Darkman
Title: Re: PtokaX UDP-Debug Receiver
Post by: PPK on 15 October, 2006, 19:25:50
1. It is possible to know who is monitoring my HUB with it? some command for this?
No, here is no command for this...
2. In case that I want, is possible to unsubscribe some connection for this tool, that has been opened for another person? some command for this?
No.
Title: Re: PtokaX UDP-Debug Receiver
Post by: Nada@WTB on 18 October, 2006, 23:21:42
I have an hub running on tcp port 888 and udp port 889.

I have tried using this application on port 889 but it gives this error: 07:57:49 - *** UDP Socket bind error: 10048.   If I set port 888 it runs but it doesn't show anything.

I may get flamed for this but, I have the same question, and I am sorry but the 5 line FM below does not answer the question

PtokaX UDP-Debug receiver v1.0

- set desired UDP port for receiving debug messages from a hub
- press Listen
- subscribe for messaging by !debug <portnum> in mainchat of a hub
  (Ex.: !debug 422)
- unsubscribe by typing !debug off in a hub's mainchat.

Note: you have to be an Operator on the hub where you wanna subscribe.

-ptaczek-


The "desired UDP port", can that be any port or does it need to be a specific port relating to the hub's ports?
Title: Re: PtokaX UDP-Debug Receiver
Post by: Nada@WTB on 21 October, 2006, 04:11:03
:( :( sigh  :( :(
Title: Re: PtokaX UDP-Debug Receiver
Post by: Toobster?? on 21 October, 2006, 19:48:37
Dont use the port used in Ptokax use a different port, like the example port of 422
Title: Re: PtokaX UDP-Debug Receiver
Post by: Nada@WTB on 21 October, 2006, 22:05:13
Dont use the port used in Ptokax use a different port, like the example port of 422



Thank You! ;D
Title: Re: PtokaX UDP-Debug Receiver
Post by: Toobster?? on 23 October, 2006, 21:24:57
Your welcome  :)

I also made the same error many times, as instructions dont say DO NOT use same udp port as hub, I had assumed same as you that to listen to hub you would use same udp port. ::)
Title: Re: PtokaX UDP-Debug Receiver
Post by: PPK on 24 October, 2006, 00:01:05
Instruction expecting some knowledge of user... is not possible to use same ports for different apps  ::)
Title: Re: PtokaX UDP-Debug Receiver
Post by: bastya_elvtars on 24 October, 2006, 00:08:35
Instruction expecting some knowledge of user... is not possible to use same ports for different apps  ::)

:-D
Title: Re: PtokaX UDP-Debug Receiver
Post by: Nada@WTB on 24 October, 2006, 01:46:19
Instruction expecting some knowledge of user... is not possible to use same ports for different apps  ::)


Sorry for seeming such a n00b, but between my back pain and the 800+mg a day of pain meds, I am lucky I remember how to turn the computer on. And thank all of you guys for what you do, without guys like you, helping guys like me, Direct Connect would not be as strong as it is today.
Title: Re: PtokaX UDP-Debug Receiver
Post by: baba.runner on 25 January, 2007, 20:19:56
Great tool this debuger

Now that I installed it, it is showing me often this message:
 recv() error WSAECONNRESET. User is being closed.

Can you please tell me what does it mean and how can remedy.

Thanks in advance for your support
Title: Re: PtokaX UDP-Debug Receiver
Post by: zero-cool on 25 January, 2007, 21:01:08
Now that I installed it, it is showing me often this message:
 recv() error WSAECONNRESET. User is being closed.

Can you please tell me what does it mean and how can remedy.
Take a look here (http://forum.ptokax.org/index.php?topic=6585.0)

Regards,
Title: Re: PtokaX UDP-Debug Receiver
Post by: baba.runner on 25 January, 2007, 21:45:46
Thx a lot zero-cool
next time i will first use the search function  ;D
Title: Re: PtokaX UDP-Debug Receiver
Post by: PPK on 12 October, 2007, 17:11:52
After long time new (http://www.PtokaX.org/files/PX-UDP-DBG-RECV-2.2.1.7z) version :P