NXS-3

[NightLitch]

ok, does this script load before or after NXS-3

[NightLitch]

see this line on NXS-3 in the beginning:

forbiddenClients = {"_koala", "mldonkey", "mldc", "_om", "zearch", "XKing", "repika", "pepek", "moglo", "0.233B", "0.233A", "0.181fr", "0.241A", "0.24A"}

just put in your forbiddenWords = { ":FP:" }

in it:

forbiddenClients = {"_koala", "mldonkey", "mldc", "_om", "zearch", "XKing", "repika", "pepek", "moglo", "0.233B", "0.233A", "0.181fr", "0.241A", "0.24A", ":FP:"}

and you don't need your script.

/NL

[kazi]

okay i took both scripts out,  and added the :FP: in the searchstring. also the "mld"

but..  the ml donkeys are coming in now  and don t get kicked by the script.

forbiddenClients = {"_koala", "mldonkey", "mldc", "_om", "zearch", "XKing", "repika", "pepek", "moglo", "0.233B", "0.233A", "0.181fr", "0.241A", "0.24A", ":FP:", "mld"}

[WickeD]

That client check is working fine for mee! No clients in that line can enter my hub!


Do you have this on 1 ?

-- Check for Bad Clients / 1:on/0:off
CBC = 1

//WickeD

[kazi]

Yes I have set it on: 1

btw  you all having loads of mldonkeys trying to enter the hub?

[WickeD]

Yes I have mldonkeys trying to enter my hub! If I sett it on 0:off then I have mldonkeys in my hub! So I think it works for mee!


//WickeD

[WickeD]

Have you made a clean installation of NXS-3 v.3.5 ?


And restarted your hubsoft ?

//WickeD

[kazi]

yes I did.

and then tok out my separate script agianst mldonkeys,  and added in the .lua file  the mld

and restarted scripts

[WickeD]

Try to restart your hubsoft after you tok out your separate script agianst mldonkeys!

Not only restart script!  Try that!   After that I can not help you eny more!   Then you most ask NL!

//WickeD

[kazi]

hum seems to work now.
sorry but I didn t think it was nesecarry to restart the hub, by only removing a script.

hope it stays this way:)

thank you.

[kazi]

well thought it was all okay, but they do slipp through somehow..   not all of them..  some.

[NightLitch]

Originally posted by kazi
well thought it was all okay, but they do slipp through somehow..   not all of them..  some.

They may have a different tag maybe or there usually take some little time before they get disconnected, becouse the function is in NewUserConnected

/NL

[kazi]

okay thanx,  is it possible to create something to permban/ban someone who is not in the hub?  or retrieve by typing a username his ip?

i had that function in the scripts i used to use... it s handy to have that.

[WickeD]

When I type: !timeban [Kommunicera]Ny 7 d Du har en mycket d?lig client!! En Hacked Client! Fixa! Du ?r nu banlyst i 7dagar!!

Why do it show in mainchat like this:

<[Bot]??Angel??> [SU+]WickeD TidsBanlyser [Kommunicera]Ny, i: 7 minuter, Anledning: d Du har en mycket d?lig client!! En Hacked Client! Fixa! Du ?r nu banlyst i 7dagar!! - Klagom?l / Funderingar skickas med e-mail till: support@northside.se


And the user only did get a 7 min ban!


//WickeD

[NightLitch]

do you see your misstype here:


!timeban [Kommunicera]Ny 7 d Du har en mycket d?lig client!! En Hacked Client! Fixa! Du ?r nu banlyst i 7dagar!!


you have a space between 7  and d that is your problem.

becouse of that the timeban takes the default in your case is minutes.

/NL

[WickeD]

I see!!!  *lol*

Thx a lot my m8!!!

//WickeD

[WickeD]

I have a error!  And I use NXS-3 v.3.5

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

//WickeD

[NightLitch]

Originally posted by WickeD
I have a error!  And I use NXS-3 v.3.5

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

Syntax error: bad argument #1 to `strlen' (string expected, got nil)
stack traceback:
   1:  function `strlen' [C]
   2:  function `DataArrival' at line 491 [file `...am\ptokaX 0.330 build 15.25\scripts\3.NXS-3.lua']

//WickeD

ok notice my problem there thx WickeD.

/NL

[NightLitch]

So quiet here, is it only above problem that WickeD have or have you all abanddon my bot ^^ hehe

/NL

[kazi]

Hehe don t wanna be a pain,  i sure do like the script..  best I had so far, so I will keep using them.

only hope it s bossible to track a username in the hub with logon details  and ip, and the posibility to ban the name/ip even when user is not in hub.

and..  an option for redirect to another hub  when user has to less or too much slots / hubs?

maybe something for a next release  if u r still feeling great to build hehe

[WickeD]

My problem was only at that time! No more problem after that time!

The script is working fine!  =)

Wee are waiting for the next version!  *lol*

How do wee update the Guardian ip-number list? Is there a webpage to get the ip-numbers from?

And can you take a look at my wishes to the next NXS-3 version my m8?

Thx a lot for the best script there is!!!!!


NXS-3 RULES!!!!!!!!!!!!!!!!!!  *lol*

//WickeD

[NightLitch]

Hmm what I can do is adding a redirect from the redirect already given in LowShareRedirect & HighShare Redirect
gonna see what possibility I can dig up, becouse Kepp is working on a GUI for the script so I Am in particular w8ing for that to be released so I can Beta-Test it.

But gonna see what I can do for futher request's.

becouse I have 4 version left before 4.0 with GUI :-p

[f3rry]

Hi NightLitch,

So quiet here, is it only above problem that WickeD have or have you all abanddon my bot ^^ hehe

No, we haven't left, but onley wait for a new version of NXS-3 LoL

2 of my hubs are running whit the script and i must say, it works great, no problems for now. Or must i say, 1 problem, i don't have anything to do anymore on my hubs, the script is far to good.

I'm working on the translation english to dutch ;-P

Greetings and keep it up

[kazi]

The only thing he doesn t stop btw.  are the stealth clients :(

i still need to manually check them

[NightLitch]

Originally posted by kazi
The only thing he doesn t stop btw.  are the stealth clients :(

i still need to manually check them

Well the best way detecting them is with DC++k CDM

the only way's I know of detecting them is by faking hubs and had a detection earlier that detected ForceRedirect but inocent users where banned becouse of that.

/NL