Is there a multi chat for 0.3.2.6 TD4 ?

[viss]

Hi guy's,

Firstly may I say congtats for the creation of a brilliant program. Second my question, We have 2 hubs running (private) and would like to be able to see the chat in both hubs in 1 window. Is this possible and how is it done?  Ive tried the multihub in ptokax but it dosent seem to work. Ive been searching for around an hour for answers but I cant find anything. Your help would be appreciated.

Viss :))

[AlwaysConnected]

try to download this

http://www.ibscgroup.altervista.org/varie/myc1_20.zip

Try right click and choose "Safe target as"

VERSION 1.20 OUT

YOU CAN DOWNLOAD

+added share to bot
+added able/disable multi op chat





i found it on y-hub forum

multichat - NEW VERSION 1.20

its just for info ^

[viss]

It works but its not quite what I had in mind. I was after a script or a bot to run within ptokax that would show the chat from both hubs in the DC Client so all can see whats happening in either hub. This is for a reason, both hubs have different share limits but we would all like to still communicate, as some users cant reach the spcified limit on the larger hub.

Viss

[nErBoS]

Hi,

You have that in ptokax software, take a good look at Multi-Hub, you can join the chats of various Hubs. You can also use this software to join chats, but you have to wait for ptokax script release... http://hub-link.sourceforge.net/

Best regards, nErBoS

[viss]

I read somewhere that this feature is not working ? I tried it but couldent get it to work  ?(

[viss]

I put MHServer address:  Hub address

MHSServer password:   #######

Multichat name: -=ChatBot=-

ticked the 3 boxes underneath hit connect and the status says not active?

I have created the username and password in the hub so I dont know whats wrong ?

[HaArD]

Hub-Link does not require a support script to link the chat of two or more hubs.

Linked chat will appear as: Chat Message





With a support script it will appear as: Chat Message




OP-Chat between the two hubs can also be linked in the same way.

[[PT]CableGuy]

Hi there:

If you use Hub-Link , you can connect several hubs (running ptokax) together  
Without the hublink script for ptokax , it will only function "multi-chat"

So...you just need to configure Hub-Link and both Ptokax to connect to the Hub-Link.
See more info here:

Hub-Link Website
Hub-Link Forum

[Psycho_Chihuahua]

Why dont you just forget all those Ideas and just run the MHServer on one of your PC's and then add that MHServer in your Ptokax MultiHub Settings?

Thats what i did seeming though i am still triing to link 2 Ptokax Hubs, so that they make up 1 virtual one, and the scripts out there are rather rare.

[viss]

If you see the above post ive tried MHServer but cant get it to work ?  I think it may be a firwall issue somthing is stopping it from connecting. Is there ant port settings that have to be allowed to let MHServer connect ?

[viss]

Ok ive been looking into hublink and this looks like what I need. Now I was reading through the help file to set it up and noticed it refers to a .scipt file that must be placed on each of the hubs in the script folder, Correct me if im wrong Ptokax dosent use .script files but it uses .lua ? So what do I do now ? What file do I put in the hubs ?

Viss

[MrZ]

Hia

We ( I ) have been running the MYC v1.05  for about half a year now and its runs just fine.. i had some problems with the 1.2 version, but as the 1.05 has all we wants i stay put....

As the MYC project has stoped developing i have waited for the Hub-Link to get PtokaX support.. but thinking a lot of testing it b4 as it seems to be delayed.

just some info

Z ya

[viss]

Thats great im sure its a fantastic program but that dosent answer my question ? I still need to get the damn thing working  :(

Viss

[MrZ]

Hiia

I dwl it and set it up with 2 hubs and the Hublink on the same PC.. took about 2 mins to set it all up and working..

Do that first and play with it

[viss]

Originally posted by viss
Ok ive been looking into hublink and this looks like what I need. Now I was reading through the help file to set it up and noticed it refers to a .scipt file that must be placed on each of the hubs in the script folder, Correct me if im wrong Ptokax dosent use .script files but it uses .lua ? So what do I do now ? What file do I put in the hubs ?

Viss

Please read this I need to know about script before I install it ?????????????????????

[Event_Horizon]

Hi

I've tried MHC & we got a little prob - i can't connect to a friends hub. He runns Y-Hub, account is created ( OP ) right name & pass - I always get "disconnected by hub" does anbody know why ?  ?(

THY in advance

[Event_Horizon]

1st prob is solved...... just added a <++ TAG

hub-link is connected to 3 hubs & enabled:

1 HoP - Y-Hub - Regged OP
2 WS - PX-Hub - Regged OP
3 PR - PX-Hub - Regged OP

chat from HoP is shown in all hubs
chat from PR is shown in all hubs
Chat from WS is just shown in WS ( normal ) but not in the other hubs

any ideas ??

[viss]

How hard is this question why isnt any body answering. ?? Moderators are you there or on holiday ?

[[PT]CableGuy]

Originally posted by viss
Ok ive been looking into hublink and this looks like what I need. Now I was reading through the help file to set it up and noticed it refers to a .scipt file that must be placed on each of the hubs in the script folder, Correct me if im wrong Ptokax dosent use .script files but it uses .lua ? So what do I do now ? What file do I put in the hubs ?

Hi there viss:
Hub-Link have it's own website and forum , so this is not the right place to make those questions...sorry.
About you're questions , you're 100% right   :]
Ptokax uses .lua extension files and .script is used by SDCH and NMDC.
The lua script to connect PtokaX hubs to Hub-Link , is not public yet , but it will be soon ....


BACK to the topic of this post...

Hub-Link can connect PtokaX and YHub hubs without any script !
It will only "work" multi-chat , but....since topic for this thread is:
" Is there a multi chat for 0.3.2.6 TD4 ? "  
Why use scripts and resources from you're hubs when Hub-Link can connect all without scripts needed ?
It's just as plain as adding DCHL user has an OP in all hubs and configure Hub-Link passwords for each hub.
And you're done (for multi-chat)

[viss]

AMEN BROTHER thankyou that is all I needed to know it explains everything. :))

[viss]

Well that worked just great as soon as I started it Ptokax had a heart attack had address violations poping up everywhere lost all my hub settings  X( I think ill just forget it

[HaArD]

Psycho_Chihuahua,

You're right of course, if all you want is multi-chat MHServer does the job quite nicely already.

MrZ,

MYC was based on Hub-Link Beta 2, Beta 3 includes all of the functionality of MYC that's why development stopped.

If you eventually want full linking then starting with Hub-Link puts you in a great position as all you'll need to do is add the local script when it is released.

Event_Horizon,

YHub generates a $Lock that occasionally  contains 'illegal' characters and causes the connection routine in Hub-Link to fail about 75% of the connection tries. Short Term fix is to disable the "Enable Key Check (Lock Respond)" on the Advanced Tab of the Advanced Settings in YHub. The next version of Hub-Link includes a more robust Lock2Key routine which solves the Yhub connection issue.

*'illegal' in the sense that the packet sniffing of an NMDC $Lock never included ASCII characters higher then 127 so it's assumed they should not be there, but YHub does use them.

viss,

The existing help for Hub-Link was written with NMDC and SDCH in mind, they use .script or .vbs/.js scripts.  When the PtokaX script is released publicly this will be updated to reflect a .lua script for PtokaX.

[HaArD]

viss,

Not sure what problem you had that caused Access Violations in PtokaX but since you're not using a script I am sure your problem had nothing to do with Hub-Link.

I'm happy to help you get it set up correctly if you want... Solve your other problem and get your hub working again and then let me know....

[Event_Horizon]

Originally posted by Event_Horizon
1st prob is solved...... just added a <++ TAG

hub-link is connected to 3 hubs & enabled:

1 HoP - Y-Hub - Regged OP
2 WS - PX-Hub - Regged OP
3 PR - PX-Hub - Regged OP

chat from HoP is shown in all hubs
chat from PR is shown in all hubs
Chat from WS is just shown in WS ( normal ) but not in the other hubs

any ideas ??

HaArD do you how to fix this prob ^^ ??

about the connection trouble - will try it thx

[MrZ]

Hiaa :))

Tnx 4 ur reply hard.. realy like ur work.
And yes ive (we) been waiting but i think i start right now looking into HL to get it all prepared as u say.
Im a careful general and want it all to work 100% b4 i implement it..... and that is what im starting at right now...

Tnx a LOT HaRd :))

Z ya