- RoboCop v4.0 - Testdrive 3 or Higher!

[acethecase]

M8 if u need any help in graphics just tell!:  

[gazzer]

hi i also have the new hub n robo cop final edit.

prob i am finding is crashing hub frequently, hope its me lol.
here goes.............

if i reg a user to vip or upgrade via script it  will not allow me to finalise it i have to re-boot hub continually?
even in hub itself it crashes, so i hope its hub not scripting, please advise (.499 is hub)

[Optimus]

M8 if u need any help in graphics just tel

Hi m8 thx, i'm working my ass of hehe

if i reg a user to vip or upgrade via script it will not allow me to finalise it i have to re-boot hub continually?
even in hub itself it crashes, so i hope its hub not scripting, please advise (.499 is hub)

You use a unofficial Ptokax release with buggs, please use TD4 instead all will be ok then. Thank you

Greetingz Optimus ;)

[Optimus]

What have i done so far???

RoboCopv7.0
   bY Optimus?

- Added Redirect user counter in !hstat
- Changed counter system abit more (Improved)
- Added a file for OnTimer Hub-Addmessage for customize to your own needs Folder: logs/hub_addmessage.lua
- Added redirect/disconect counters for minshare/minslots/maxslots/maxhubs/ratio
- Changed register message a little
- Anti-Advertise Table in file *.tbl
- Small change on HubProtection
- Added !myinfo for normal users
- Added DC:PRO Upload limiter check F:10/5
- Added Logs are now Automaticly Cleaned and writen to History after [x] lines
- Added Table/File SafeAdvertise Addresses
- Added add/del Anti-Advertise & add/del Safe-Advertise (GUI) (verry nice)
- Added HubJump to Table (hubjump.tbl)
- Added HubJump to RoboCop GUI
- Some other cosmetics
- Added a totaly new designed !help function
- Maybe Fixed the Disclaimer message onConnect
- Changed !showreg a little
- Added Import of a settings.ini from older Robocop versions (GUI)
- Added warning.txt log
- Removed VipsNotChecked
- Added User/Regs/Vips NotChecked (GUI)
- Added !inbuild - Show all available Ptokax Inbuild-Hub commands
- Changed !drop command & written to logs
- Added !showlog       - Show all logged nicks
- Added !showlog       - Show all logs of that Nick/IP
- Removed !seen command maybe returns when new Ptokax will be out.
- Added improved counter system for kicks/warns
- Added Reason/bWho to Kicked/Warned & !info command
- Changed Send_Message_On_Connect_In_Pm to be set to all profiles
- Added PmToOps
- Added !showwarnlog
- Added !delwarnlog
- Added !massblocked - Send mass message to Blocked users in PM
- Automatic !back function  when user writes in main
- Added new option in !regme command, when selfregistration is disabled it will send a message to all Operators that the user wants tobe registerd.
- Removed RegisterTag from !regme command
- Changed Register Tag can now be set to each Profile of choice (on/off & TagName)
- Added Master/Operator/Vip/Reg/User Minshare settings to Script & RC GUI (They also work as a remote command to RoboCop !sminshare )
- Added new logging system
- Added Table/Log Cleaner for Getkicks/Getwarns/Kicklog/Banlog/Warnlog/Timebanlog/UserUpTime/etc
- Added Notification Messages for every Profile that can be turned on/off (Message/Kicks/bans/warns/etc)
- Added Client Detector for most common Clients
- Added Switches to Allow or Disallow clients
- Added Minversion Checks for most common Clients

It's only the GUI menu that needs to be finished. were working verry hard on it to finish it. Thanks

Greetingzz Optimus, Ciao

[gazzer]

appologies optimus, nowe i know error of my ways i shall get the other hub............dopey gazz as norm lol.
it is a great script robo cop, all the ops love it m8ee.
cos its sooooo good they have all turned into lazy gits now!!!!!!!

respect gazzer

ps what is latest version of robo out now?

[mOrrI]

Hey Opti!
U really do a great job...
and i whould like to know that u got my support

and yes also some Support to ptokax devloping team to so that they can get us the PTOKAX SOFTWARE OUT HERE lol...

GO OPTI GO!

and GO TEAM PTOKAX!!!!

[Cyberia]

Lol  
Must be a master release this time  )

[bsalsa]

on robocop 6d all user list= 0
exept the user itself . it usually fix it self after 1 hour.
did any one ever see it ??
any solution?

[MetalPriest]

See forward to 7xx version...Optimus work faster hehe..


RoboCop is my best friend just now...

Your poor Priest In Sweden

[??????Hawk??????]

heya  Optimus

anychance of changing the   !tophubbers  and  !topkickers commands  to show user defined ammount in list.

I.E

!tophubbers 30
!topkickers 30

would display the top 30 users  



????????????????????????????

[Optimus]

mm, indeed hawk gone make that right away.  :D

[??????Hawk??????]

Yur a ..... STAR m8    :))  :))  :))  :))

[night_hawk]

hi am am new to useing robocop i was using mean machine but had to many problems with it....Anyways my question is there a way to to ad powers to my adims i had to change them all over to masters...is there a way you can make it that admins have the same powers as masters just no powers to change hub settings....if so please let me know and if not thats ok....
it is cause i want my admins to have more powers than my ops....so if you can do that for me I thank you very much.....Night_hawk :)  :)

[PiRaTe]

Is there any chance of including a built in ip range blocker to Robocop to stop certain groups associations etc from entering my hub. (you know who i mean by this)

keep up the great work on this script... it is much appreciated..

PiRaTe

[Optimus]

hi am am new to useing robocop i was using mean machine but had to many problems with it....Anyways my question is there a way to to ad powers to my adims i had to change them all over to masters...is there a way you can make it that admins have the same powers as masters just no powers to change hub settings....if so please let me know and if not thats ok....
it is cause i want my admins to have more powers than my ops....so if you can do that for me I thank you very much.....Night_hawk :) :)

- Made All commands Customizable so that they all can be set to Profiles of choice! So there is your Party ;)

Is there any chance of including a built in ip range blocker to Robocop to stop certain groups associations etc from entering my hub. (you know who i mean by this)

keep up the great work on this script... it is much appreciated..

Yes that is still on my list, called Ranger! gone do that yups

Greetingz Optimus

[night_hawk]

how do i set it up can you help me with that

[mOrrI]

About oDC client!
well.... i tested oDC client with Robocop!
and this is what i got:

  This Hub is DC++ Only, You are using unauthorized client software, please go to http://dcplusplus.sourceforge.net / and download the newest version of Dc++
- Disconnects...
tested with version 5.212

anyone knows why this happens?

Opti if u can pls PM with the anwser....
cause i keep losing track of this thread!
thanks in advance...

[night_hawk]

look in your main setting for robocop thats all you need to do

[Optimus]

About oDC client!
well.... i tested oDC client with Robocop!
and this is what i got:

This Hub is DC++ Only, You are using unauthorized client software, please go to http://dcplusplus.sourceforge.net / and download the newest version of Dc++
- Disconnects...
tested with version 5.212

anyone knows why this happens?

Opti if u can pls PM with the anwser....
cause i keep losing track of this thread!
thanks in advance...

Well try tofind this setting... --> Sets DC++ Only on/off

Other the easyst way is to Reinstall robocop, and try again.

I checked here can't find anything strange, other people allready found it. hehe

[night_hawk]

how do i set robocop up so that my adims have the same powers as my matsers just with out the script settings....

[Optimus]

how do i set robocop up so that my adims have the same powers as my matsers just with out the script settings....

Well Admins Profile is not a supported by RoboCop so most of the commands will not work.  :(

[night_hawk]

thats ok do you think you can ad them in the next verion you make
and when is it set to come out

[Optimus]

thats ok do you think you can ad them in the next verion you make
and when is it set to come out

Yes in a next release there will be a [Moderator] profile but it's to much work for this release. I gone make it as soon as possible.

I first wanne bring out RoboCopv7.0 so people can start bugg Fixen.

When will it be out??

Well the Script it self is ready to go, but the GUI-Interface isn't ready yet... (90%ready)
We are working at the last bits and Pieces so please be patience till then *lol* (HARD) hehe

I can only say this release is wurth waiting for, once it's there you will all enjoy working with it!!!  ;)

Btw, Thx for all the SUPPORT from you all, togheter we made it possible to make RoboCop as it is Today... Thx

Greetingz Optimus, Ciao L8trsss

[MetalPriest]

Take your time... I waiting soo much for this !!


MetalPriest
Sweden

[night_hawk]

yes i bet it will rock