Top Hubbers

[jiten]

An old quote came to my mind ;D
Something about "bandwidth" and "resources"  ;D ;D ;D

Indeed

As I posted earlier:

That won't be possible as we would need to modify every user's MyINFO and that is surely a bandwidth and resource hog.

[Naithif]

Hi

   -- Profiles checked [0 = on; 1 = off]
   tProfiles = {

• = 1, [1] = 1, [2] = 1, [3] = 1, [4] = 1, [5] = 1 },
  
  Uhhh
  ???  0 = on and 1 = off ???

[JueLz]

Should that be The other way around?

[jiten]

Hi

   -- Profiles checked [0 = on; 1 = off]
   tProfiles = {

• = 1, [1] = 1, [2] = 1, [3] = 1, [4] = 1, [5] = 1 },
  
  Uhhh
  ???  0 = on and 1 = off ???
  
  

  
  Should that be The other way around?
  

Oops... where was my head at?

[speedX]

hey but the script works.....he just replaced the place of on & off bymistake....

[nEgativE]

Hello all, excelente work jiten 
Is it possible to send info on connect ? like..
[Scripter]Jiten, Hello, your total uptime is blabla
[Scripter]Jiten, your rank is something
i see there is a bRankOnConnect but just for UserCommands i think.

Thx in advance.

[jiten]

Is it possible to send info on connect ? like..
[Scripter]Jiten, Hello, your total uptime is blabla
[Scripter]Jiten, your rank is something
i see there is a bRankOnConnect but just for UserCommands i think.

Well, that option you mentioned does this: Send hubtime stats on connect [true = on; false = off]

This is an example of what you'll get on connect:

[18:21:46] <PtokaX>

   ========================================
         Stats:
   --------------------------------------------------------------------------------
   - Nick: jiten
   - Total uptime: 7 minute(s)
   - Daily average uptime: 7 minute(s)
   - Current Rank: Newbie

[ollobollo]

well programmed script, respect, but there is a little problem since i want to change the imax= 20 into 40. the rightclick shows the 40 but in pm there are only 20 tophubbers shown. can you help me where i can solve this little problem?

regards

ollo

-- Maximum hubbers to show when using !tophubbers
   iMax = 40,

   -- Send message to users with lower than specified Average uptime (AUT) [true = on; false = off]
   bWarning = true,
   -- Minimum Average uptime (hours) that triggers the warning
   iAUT = 1,

problem is found, thx

[jiten]

there is a little problem since i want to change the imax= 20 into 40. the rightclick shows the 40 but in pm there are only 20 tophubbers shown. can you help me where i can solve this little problem?
problem is found, thx

Care to share with us how you solved this problem?

[nEgativE]

Well, that option you mentioned does this: Send hubtime stats on connect [true = on; false = off]

This is an example of what you'll get on connect:

Yes jiten, it's working well.. my bad.
Excelente trabalho

[ollobollo]

jep, its very simple: i change the place in the scriptlist, before robo, now i see the right appearence of tophubbers-script, i think theres a conflict with the inbuilt tophubbers from robo.

[speedX]

hm..quiet possible.....
Posted on: 01 October 2006, 17:08:01hey jiten...if ne user types !hubtime <nick> thn his hubtime comes above the command....i would like if it comes below it if possible.....

[jiten]

hey jiten...if ne user types !hubtime <nick> thn his hubtime comes above the command....i would like if it comes below it if possible.....

Have a look at RegCleaner's thread and you'll see a similar change in the code that does this.

[speedX]

oh god.....y cant i do anythign rite.....srry but i messed the whole script....could u plzz edit and copy tht portion and paste it....plzzz

[Herodes]

oh god.....y cant i do anythign rite.....srry but i messed the whole script....could u plzz edit and copy tht portion and paste it....plzzz

Get the script, a clean copy, and go through the thread again,...
Pasting and deleting at the points that were mentioned

[speedX]

hubtime = {
      fFunction = function(user, data)
         -- Parse nick
         local _,_, nick = string.find(data, "^%S+%s+(%S+)$")
         -- Exists
         if nick then
            -- Return
            BuildStats(user, nick)
         else
            user:SendMessage(tSettings.sBot, "*** Syntax Error: Type !hubtime <nick>")
         end
      end,
      tLevels = {
         

• = 1, [1] = 1, [2] = 1, [3] = 1, [4] = 1, [5] = 1,
        },
        tRC = { { "Show an user's stats", " %[line:Nick]" } }
     },
  

Where shud i paste SendToAll??? so tht i could get the result after the command.....

[jiten]

hubtime's function should be like this:

fFunction = function(user, data)
	-- Parse nick
	local _,_, nick = string.find(data, "^%S+%s+(%S+)$")
	-- Exists
	if nick then 
		-- Return
		SendToAll(user.sName, data)
		BuildStats(user, nick)
	else
		user:SendMessage(tSettings.sBot, "*** Syntax Error: Type !hubtime <nick>")
	end
end,

You'll also need to replace your BuildStats function with this one:

BuildStats = function(user, nick)
	-- In DB
	if tOnline[nick] then
		-- Average uptime in days
		local iAverage = os.difftime(os.time(os.date("!*t")), tOnline[nick].Julian)/(60*60*24)
		if iAverage < 1 then iAverage = 1 end
		-- Generate message
		local sMsg = "\r\n\r\n\t"..string.rep("=", 40).."\r\n\t\t\tStats:\r\n\t"..
		string.rep("-", 80).."\r\n\t- Nick: "..nick.."\r\n\t- Total uptime: "..
		MinutesToTime(tOnline[nick].TotalTime, true).."\r\n\t- Daily average uptime: "..
		MinutesToTime((tOnline[nick].TotalTime/iAverage), true).."\r\n\t- Current Rank: "..GetRank(nick).."\r\n"
		-- Send stats
		SendToAll(tSettings.sBot, sMsg)
	else
		user:SendMessage(tSettings.sBot, "*** Error: No record found for '"..nick.."'!")
	end
end

Notice that with these changes, if you've enabled the 'bRankOnConnect' option, every user's mainchat will be flooded with connecting users' stats. So, be careful.

[speedX]

nope....u again got it wrong......see all can see the command typed frm b4 only....i took tth setting made by u @ lua.uknet.com ........but the result comes above the command....i would like if it comes below the command......nothing else....

[jiten]

nope....u again got it wrong......see all can see the command typed frm b4 only....i took tth setting made by u @ lua.uknet.com ........but the result comes above the command....i would like if it comes below the command......nothing else....

First of all, do read and test my previous reply to you post carefully with a clean copy of this script.

Then, you can say:

nope....u again got it wrong......

However, at the moment, that won't be possible as those mods really do what you requested

[speedX]

Yup, done. Actually I had copied ur chat arrival table frm lua.uknnet.com. So, it was not showing the required result even after making the above changes. But when i used a new copy, it gave me a positive result. Thank you.
Posted on: 05 October 2006, 00:09:23hey jiten, one more help dude
I dont kno wat to do if I want the command to come b4 the result.
here is the script:

--## Simple Time Bot
--## Requested by SteffJay
--## Made by nErBoS
--## Converted in LUA 5 by 6Marilyn6Manson6
--## Commands:
--##   !time - Gives the current time

sBot = "Time-Bot"

function ChatArrival(user, data)
   if (string.sub(data,1,1)=="<") or (string.sub(data,1,5+string.len(sBot))=="$To: "..sBot) then
      data = string.sub(data,1,string.len(data)-1)
      s,e,cmd = string.find(data,"%b<>%s+(%S+)")
      if (cmd == "!time") then
         user:SendData(sBot, GetTime())
      end
   end
end

function GetTime()
   s = os.date("%S")
   h = os.date("%H")
   m = os.date("%M")
   d = os.date("%d")
   mm = os.date("%m")
   y = os.date("%y")
   Date = "Date: "..d.."/"..mm.."/20"..y.."   Time: "..h..":"..m..":"..s
   return Date
end

and I would like if tht time comes in 12 hr clock format with AM and PM
I tried to put this code (%I:%M %p) but wat I found was errors, Could u help plzz

[6Marilyn6Manson6]

--## Simple Time Bot
--## Requested by SteffJay 
--## Made by nErBoS
--## Converted in LUA 5 by 6Marilyn6Manson6
--## Commands:
--##   !time - Gives the current time

sBot = "Time-Bot"

function ChatArrival(user, data)
	if (string.sub(data,1,1)=="<") or (string.sub(data,1,5+string.len(sBot))=="$To: "..sBot) then
	data = string.sub(data,1,string.len(data)-1)
	s,e,cmd = string.find(data,"%b<>%s+(%S+)")
		if (cmd == "!time") then
			user:SendData(sBot, GetTime())
		end
	end
end

function GetTime()
	f = os.date("%p")
	s = os.date("%S")
	h = os.date("%l")
	m = os.date("%M")
	d = os.date("%d")
	mm = os.date("%m")
	y = os.date("%y")
	Date = "Date: "..d.."/"..mm.."/20"..y.."   Time: "..h..":"..m..":"..s.."  "..f
	return Date
end

[speedX]

hey 6M6M6 thx for the help, but ur script was showing me wrong time, for 9:52 AM it was showing 00:42 AM. I donno tht it is problem in script or frm side coz i was in a hurry, thn i tried Mutor's script, it is working well & btw wat is UTC mutor? and can u edit this script in such a way tht even if one user type's !time all shud be able to see command along with the result. Thank you

[Thor]

http://ro.4242.hu/cgi-bin/yabb2/YaBB.pl?num=1159443959 ;D

hey 6M6M6 thx for the help.....but ur script was showing me wrong time.....for 9:52 AM it was showing 00:42 AM .......i donno tht it is problem in script or frm side coz i was in a hurry......

Maybe the server's clock didn't set up... Check it

[speedX]

Hey jiten, this tophubbers doesnt give result if the nick is given in small. Like for BLITZKRIEG, if i type !hubtime blitzkrieg, it shows nick not found.
And one user in my hub had first logged in with nick ShEvChEnKo7 and thn later SHEVCHENKO7 so there has been a double entry for this guy.

0 month(s), 9 day(s), 11 hour(s), 21 minute(s)   10460 min   09/06/06 20:50:24   09/06/06 21:35:56   Cool Member   *Online*   SHEVCHENKO7
and

0 month(s), 7 day(s), 5 hour(s), 34 minute(s)   5122 min   09/23/06 07:44:01   09/23/06 07:42:06   Cool Member   *Online*   ShEvChEnKo7

so now wat to do ??

Posted on: 05 October 2006, 19:42:07hey guys, this is urgent for me. Could ne one fix it for lower case also? plz

[Psycho_Chihuahua]

could.......you please........stop posting.........like this?