- RoboCop v4.0 - Testdrive 3 or Higher!

[Optimus]

how do i get the !warn funcion to work. my ops said users are not getting them is there somethine i need to do so they get it in pm, thank you

Gone check it out m8, have a good weekend  

Greetingz Optimus

[mOrrI]

I got a Question Opti is it possible to change the time of the timeban?

[Optimus]

I got a Question Opti is it possible to change the time of the timeban?

!timeban          - Timeban user with a reason

the tempban you will find in ptokax somewhere

[sander815]

Originally posted by Optimus
use !slots - Number of free slots

!slots 3
user 3
user 3
user 6
user 5
user 6
user 3

ETC ETC

i only see the amount of slots people have, not whats left open like !slots gives me

[uffetjur]

Hi Opti Nice Work with RC 7!

When will u have the double IP-check included
really miss that function in script!

The short script u posted earlier doesnt work
still getting clones!

[civil]

uffetjur use this Double IP  this is the latest double ip script done by optimus and i'm using it   it works :]

optimus prime thanks for the new robocop.

[Optimus]

Thx Civil that 1 is working yups :D

[sander815]

i am getting complaint sthat people using odc 0.53 getting runtime errors when doing !help

some also with dc++

any ideas?

ediT: i upgraded them to op, and then !help works normal?

[Optimus]

i am getting complaint sthat people using odc 0.53 getting runtime errors when doing !help
any ideas?

It's a know bug of oDC some more commands get stuck on it. But i will look it up again!

i only see the amount of slots people have, not whats left open like !slots gives me

I made a new Free slot search works much better

Greetingz Optimus

[robertone]

Real nice work with v7.0/v7.0a.

Unfortunately I did got a lot of error messages. Can I post them, or what? I stored them in a text file.

I'm running PtokaX 0.330 build 15-25 on a fully updated W2K Pro.

More: in both v6.0d and v7.0/v7.0a I activated "Sets No Double Login on/off" in the settings.ini. It worked fine! So I don't understand why it can't be activated with the settings interface.

In both v7.0 and v7.0a, I couldn't reset the counters. However, in v7.0a it started to function properly unexpectedly.

Went back to the older version because of the frequent "Syntax error" messages. Since then also v6.0d generates syntax errors during running. Never happened before.

robertone

[Optimus]

Real nice work with v7.0/v7.0a.

Unfortunately I did got a lot of error messages. Can I post them, or what? I stored them in a text file.

I'm running PtokaX 0.330 build 15-25 on a fully updated W2K Pro.

More: in both v6.0d and v7.0/v7.0a I activated "Sets No Double Login on/off" in the settings.ini. It worked fine! So I don't understand why it can't be activated with the settings interface.

In both v7.0 and v7.0a, I couldn't reset the counters. However, in v7.0a it started to function properly unexpectedly.

Went back to the older version because of the frequent "Syntax error" messages. Since then also v6.0d generates syntax errors during running. Never happened before.

You haven't done a fresh install you used old settings/logs/etc again in the new installation and then you have those errors

You need to read to help files better i think a Fresh install means a Totaly fresh install.

What shell i say more, i know those functions work right everybody knows that.

[Nada@WTB]

Optimus, RoboCop 7.0a works great for my hub, 0 errors, they ops and users love it, keep up the great work and I look forward to the future releases as each one keeps getting better and better.


WTB loves ya

[Mikko]

In this case fresh install means that registered users can't be copied from old install to new install?

I had some problems too. There was some syntax errors and OP chat dissappeared.

[xfiles]

Hi Mikko.

Registered users are in the Ptokax RegisteredUsers file and not in RoboCop.
If you delete all RoboCop files from the Scripts folder and do a fresh install nothing happens to your registered users.

regards

[Mikko]

I know they wont be lost if I remove robocop, I meant should those be written again when updating from rc6 to rc7. First time I tried rc7 with copied registered users file it worked nicely for some time. After few hours scripts window is full of syntaxes.
Everything else but registered users was fresh install. And I tried to find if there was something wrong with settings but nothing helped.

[robertone]

Optimus wrote:

You haven't done a fresh install you used old settings/logs/etc again in the new installation and then you have those errors

I removed all robo files before installing v7.0! Installed v.7.0a also clean, but putted back the log files (drive:\ptokax\scripts\logs\) after checking the mark-up of the files and saw no differents. However, I don't use your default settings, every client is welkom at my hub -- check just for fakers, lockers and limiters. And I did use the statistic functions of PtokaX.

Maybe I should install PtokaX also clean.

Error messages:
No syntax errors in the script.
Syntax error: attempt to index a number value
stack traceback:
   1:  function `doWriteKickCounters' at line 497 [file `Robocop\GlobalFunctions.lua']
   2:  function `BanKickCommands' at line 25 [file `Robocop\BanKickCommands.lua']
   3:  function `DataArrival' at line 705 [file `Robocop\RoboCopv7.0.lua']

Repeated 1 time

Syntax error: attempt to index a number value
stack traceback:
   1:  function `ParseInfo' at line 47 [file `Robocop\UserInfoFunction.lua']
   2:  function `RegularCommands' at line 26 [file `Robocop\RegularCommands.lua']
   3:  function `DataArrival' at line 705 [file `Robocop\RoboCopv7.0.lua']

Repeated 2 times

===============================>

No syntax errors in script file RoboCopv7.0.lua
No syntax errors in script file TrickerBot2.lua
No syntax errors in script file triggerdutch.lua
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 752 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 787 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 725 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 352 [file `Robocop\RoboCopv7.0.lua']

Repeated 33 times

===============================>robocop 7.0a at first time start up

Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 753 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 788 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 726 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 349 [file `Robocop\RoboCopv7.0a.lua']

Repeated 1 time

===============================>

No syntax errors in script file RoboCopv7.0a.lua
No syntax errors in script file TrickerBot2.lua
No syntax errors in script file triggerdutch.lua
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 753 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 788 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 726 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 349 [file `Robocop\RoboCopv7.0a.lua']

Repeated 179 times

===============================>

No syntax errors in script file RoboCopv7.0a.lua
No syntax errors in script file TrickerBot2.lua
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 753 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 788 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 726 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 349 [file `Robocop\RoboCopv7.0a.lua']

Repeated

===============================>Accidental startup of two Robocops

o syntax errors in script file RoboCopv7.0.lua
No syntax errors in script file RoboCopv7.0a.lua
No syntax errors in script file TrickerBot2.lua
Script stopped. (RoboCopv7.0.lua)
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 753 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 788 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 726 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 349 [file `Robocop\RoboCopv7.0a.lua']

Repeated 4 times

===============================>RoboCopv7.0 april 21, 2004 08:40 m.e.t.

No syntax errors in script file RoboCopv7.0.lua
No syntax errors in script file TrickerBot2.lua

Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 752 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 787 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 725 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 352 [file `Robocop\RoboCopv7.0.lua']

Repeated at least 50 times between april 20, 21:00 and april 21, 08:40.

===============================>april 21, 2004 09:10

No syntax errors in script file RoboCopv7.0.lua
No syntax errors in script file TrickerBot2.lua
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 752 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 787 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 725 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 352 [file `Robocop\RoboCopv7.0.lua']

Repeated 29 times; conclusion: 1 error/minute

===============================>april 21, 2004 15:05

No syntax errors in script file RoboCopv7.0.lua
No syntax errors in script file TrickerBot2.lua
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 752 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 787 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 725 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 352 [file `Robocop\RoboCopv7.0.lua']

Repeated 388 times

===============================>RobocopV7.0a april 22, 2004 00:20

No syntax errors in script file RoboCopv7.0a.lua
No syntax errors in script file TrickerBot2.lua
Syntax error: attempt to index local `v' (a number value)
stack traceback:
   1:  function `doCheckCleanerUser' at line 753 [file `Robocop\GlobalFunctions.lua']
   2:  function `LogTableCleaner' at line 788 [file `Robocop\GlobalFunctions.lua']
   3:  function `CalculateCleanerTime' at line 726 [file `Robocop\GlobalFunctions.lua']
   4:  function `OnTimer' at line 349 [file `Robocop\RoboCopv7.0a.lua']

Repeated several times

===============================>RoboCop6.0d april 28, 2004 00:22

Syntax error: attempt to concat global `Xwarn' (a table value)
stack traceback:
   1:  function `UserInfo' at line 117 [file `Robocop\08-info.lua']
   2:  function `operatorcommands' at line 10 [file `Robocop\05-operatorcmd.lua']
   3:  function `DataArrival' at line 689 [file `Robocop\RoboCopv6.0d.lua']

Repeated

===============================>RoboCop6.0d april 29, 2004 12:52

No syntax errors in script file RoboCopv6.0d.lua
No syntax errors in script file TrickerBot2.lua
Syntax error: attempt to perform arithmetic on a table value
stack traceback:
   1:  function `operatorcommands' at line 74 [file `Robocop\05-operatorcmd.lua']
   2:  function `DataArrival' at line 689 [file `Robocop\RoboCopv6.0d.lua']

Repeated 4 times

===============================>RoboCop6.0d may 2, 2004 22:52

No syntax errors in script file RoboCopv6.0d.lua
No syntax errors in script file TrickerBot2.lua
Syntax error: attempt to perform arithmetic on a table value
stack traceback:
   1:  function `operatorcommands' at line 74 [file `Robocop\05-operatorcmd.lua']
   2:  function `DataArrival' at line 689 [file `Robocop\RoboCopv6.0d.lua']

Repeated


I'll make an complete new setup, totally clean, PtokaX including -- let you know what's the result of it. OK?

robertone

[robertone]

Forgot to mention that I'm already for weeks under serious attack by anti-p2p groups. Or better to say, I got a lot of requests at port zero from anti-p2p groups. This caused PeerGuardian to overload my cpu (PG took 91% of my cpu's capacity). This is now solved by using an other firewall, that's capable to blok unwanted IP's. This firewall only take up 5% of my cpu's capacity -- using an AMD Athlon 1200MHz with 512 MB RAM.

robertone

[Optimus]

I think you runned out of luck lol. Maybe this time it will be beter. Cause it shouldn't be that hard lol - RoboCop use tobe fun using not a pain in the asss. hehe

Normaly a error can accure after a longer period of running, not after a fresh install.

Cya all l8trs Optimus

[Nada@WTB]

Guys just save your RegisteredUsers.dat and copies of your rules ,network.txts, then delete, I repeat delete all other files. Do a fresh install of Ptokax, then a fresh install of RoboCop, copy over the RegisteredUsers.dat and your txt files to the appropriate locations. Then personalize your options in Ptokax and RoboCop for your hub. Run the hub. Then add any seperate scripts that you might use such as zRightClicker.lua, etc. then restart scripts.
                 DC is suppose to be fun ya know, stop making it harder then it needs to be.
                 Optimus has written a great script, and tries very hard to please everyone, but 98% of the errors you all are complaining about could be solved if you follow the above steps.
               

Peace  

[uffetjur]

zitat: Forgot to mention that I'm already for weeks under serious attack by anti-p2p groups. Or better to say, I got a lot of requests at port zero from anti-p2p groups. This caused PeerGuardian to overload my cpu (PG took 91% of my cpu's capacity). This is now solved by using an other firewall, that's capable to blok unwanted IP's. This firewall only take up 5% of my cpu's capacity -- using an AMD Athlon 1200MHz with 512 MB RAM.

robertone


Thats a well known problem with peer guardian,
i suggest u try protowall instead. uses less cpu and also gives option to add banned ip's

[Mikko]

With totally fresh install including re-registered users it has been nice for nearly 24h now.

[Optimus]

hi optimus after a long time running wel the i have now the error
Syntax error: attempt to compare nil with number
stack traceback:
1: function `CheckMinVersion' at line 76 [file `Robocop\FunctionDataArrival.lua']
2: function `IdentifyClient' at line 37 [file `Robocop\FunctionDataArrival.lua']
3: function `DataArrival' at line 499 [file `Robocop\RoboCopv7.0a.lua']
can you help me

I have been looking at the piece of code and must say that there are made some mistakes. It was totaly wrong at some points must have been really tyred then. lol

I'm fixing it right now so it will come ok

Greetingz Opti ;)

[robertone]

uffetjur wrote:

Thats a well known problem with peer guardian,
i suggest u try protowall instead. uses less cpu and also gives option to add banned ip's

Tried to use ProtoWall, couldn't because an incompatibility with my NIC driver. Use now OutPost Free Firewall with BlokPost. Can blok every ip I want and uses The Bloklist Manager for generating a extended bloklist.

With PeerGaurdian, by the way, you can blok also single IP's. Just the CPU usage when blokking is the killer.

robertone

_______________________
videoclipsexchange.no-ip.com

[lynyrd]

hi optimus.
i have a question.is there any !degrade option in robocop7? if not could you add it? would be great.

[Optimus]

hi optimus.
i have a question.is there any !degrade option in robocop7? if not could you add it? would be great.

You can use !upgrade for that to. Just pick the profile of choice and downgrade the user