- RoboCop v4.0 - Testdrive 3 or Higher!

[uffetjur]

Hi Optimus!

I might have found something in RC, Getting  thsi Nick already taken problem with latest RC, never occured with version 6 of RC

Running ptokax 3.3.0 18:25

[Optimus]

I might have found something in RC, Getting thsi Nick already taken problem with latest RC, never occured with version 6 of RC

Hi there can it be something else what's causing it ;)

[uffetjur]

Dont think so, using identical settings in ptokax as with RC6, same old lua scripts, only changed is update to RC7a

[Optimus]

Well major things are changed, lot's of code i have cleaned up. CPU/MEM Usage is lower then before this time. Hopefully it will be here in a week or soo. It's the GUI that cost us most of work.

What have i done for RCv7.0b

RoboCopv7.0b
   bY Optimus?

- Added 2 new profiles called (NetFounder/Moderator)
- Adapted the Script the work with these 2 new profiles (kick/ban/warn/etc)
- Removed VIP KickProtection changed it for something much better
- Added KickProtection Table (who can kick who) NICE 1
- Added BanProtection Table (who can ban who) NICE 1
- Blocked Inbuild $kick command (cause there are some problems in Ptokax 0.330 build 15.25 regarding the NEW Profiles)
- Changed AutoBack Message, added ProfileName
- Added !regmod, !regfounder
- Changed Logs
- Build a new kickcounter without the counter.table
- Build a new warncounter without the counter.table
- Added Kickcounter for Anti-Advertise
- Removed Timeban Log (now intergrated with normal banlog)
- Changed Usage: !command TO Usage: Prefix_command
- Changed Help files - so last used Prefix is shown (And only the aviable ones)
- Added !deluser Protection Table
- Added ISP check
- New Free Slot function
- Added Watch protection Table
- Changed !sendhubad TO !sendhubad

- Updated !flood command TO !flood
- Added warn/flood protection table
- Changed Table Cleaner a little
- Fixed bug CZDC crashed when it gets redirected by script
- Removed line: local warning = gsub( "You are being redirected to: [H]", "%[H%]", addr, 1 )
- Fixed 2 bugs in minversion Checks
- Added local hub time that displays in (am/pm)
- Updated !watch command - You can now watch Multiplide Users (means more the 1)
- Fixed !topkickers - It was not sorted in the rightway
- HubProtection is rewritten (needs some testing)
- HubProtection now blocks PM messages to other users, only Operators can recieve PM from blocked user
- Changed HubProtection TO - Only Regged can download

Greetingz Opti

[acethecase]

Looking good Opti..
Dont forget to add [TAG] that we talk about, when
user reg him self he will recive [REG] tag and if I upgrade user for tex to [VIP] then [reg] is gone and he will recive automaticly [vip] tag.
And one more thing, in RB Gui u can choose who can redirect,
I have set to [Master] can only redirect / but my OP?s can do it to.. Witch I do not want / Is it working for you!?
Greetings aCe

[mOrrI]

Btw is ptokax 0.330 out?
i can't find the ptokax site?
can u tell me the url?

[Optimus]

And one more thing, in RB Gui u can choose who can redirect,
I have set to [Master] can only redirect / but my OP?s can do it to.. Witch I do not want / Is it working for you!?

Goto Ptokax - Advanced Options - Profile manager - You can disable it there per profile.

the Tag thingy isn't ready yet didn't had time to make it.

Greetingz

[Optimus]

Btw is ptokax 0.330 out? 
i can't find the ptokax site? 
can u tell me the url?

Sorry to say but it isn't out yet, the new url in the future will be    http://www.ptokax.org/

[acethecase]

hehe stupide me ..THANX m8

[Millsy]

i get run-time error 53 file not found when i try to clear the log files

Millsy

[Cyberia]

Originally posted by Millsy
i get run-time error 53 file not found when i try to clear the log files

Millsy

Check if the following files exist in the \logs directory
kick.log
ban.log
timeban.log
warn.log
iplogin.txt

If not exist, make a empty file for it.
Problem will be solved then i think.  

[uffetjur]

cmdspy is not complete, is it possible for u to add inbuild cmds like !topic etc

[uffetjur]

just discovered cmd topic not added to table inbuild in RC7

[Optimus]

Yups totaly true, it just because there is no Official release of Ptokax 0.330 etc

[Optimus]

BTW:

We have allmost finished RCv7.0b - 98% is complete. I think it will be here end of this week (sunday).

Peace i'm out Opti :]

[mOrrI]

yeap... u are the man OPTI!!!!
I think ppl will agree with me when i say this:

We all thank you and give great value for your work!

[ITSHUB]

Before you finish completes ROBOCOP version, It would be good that if the BOTS, they could show I number in GB of SHARE and an email.

And the possibility, to be able to translate texts, to any language, :D:D:D:D:D

[Optimus]

Before you finish completes ROBOCOP version, It would be good that if the BOTS, they could show I number in GB of SHARE and an email.

And the possibility, to be able to translate texts, to any language, :D:D:D:D:D

duno what you mean m8

[[FaithlesS]Crag]

Hey all, this is my 1st post on this forum...... It's just a quick one to say thanks to Opti for all the hard work he's put into this script...... Learning to code Lua scripts myself, but this is still a little out of my league.)

Been using Robocop since V4 and it's always done the job, in fact it's our networks fav security bot.

Nice 1 mate

Crag

[Optimus]

That's really good to hear, thanks verry much :D

[ITSHUB]

I'd like you to add a way to assign a value greater than 0 in the Shared field in the line corresponding to the BOT, as well as an e-mail address in the E-mail field. Maybe also put some useful description in the Descripcion field. I put a sample picture down here.



In the picture below there is an example of a translation that I made on my own. It'd nice if all of this messages were in a text file, so everyone could translate them to their own language. (english.tlb)



I hope you understand me now, since I'm using a program to translate this text from Spanish to English.
I thank you for your effort in keeping the ROBOCOP script up-to-date.  TRIB@L

[Optimus]

Yes i understand now

i will change/make:

1. set bot email to choice in GUI
2. put Top Stats in a seperate file. so you can translate it
3. set !help text into GUI. so you can translate it

I'm not adding to bot fakeshare option cause that's not nice

l8trs Alligator  

[ITSHUB]

About items 2 and 3 you misunderstand me. I'm not just referring to the TOP Stats. I like all of the text messages in the script to be put in a separate file, so I can translate them

Here I send "help.tbl" translated the Spanish:

TRIB@L


Help = {
[10]="!kick          - Patea a un usuario escribiendo el motivo",
[20]="!ban          - Baneo permanente de IP,seguido de su pateo del hubr",
[30]="!nameban       - Baneo permanente de un seguido de su pateo del hub",
[40]="!timeban       - Baneo temporal de un usuario",
[50]="!kill          - Permanente a un usuario, seguido de pateo",
[60]="!warn          - Advierte a un usuario en un mensaje privado (x veces ser? baneado)",
[70]="!flood       - Inunda a un usuario con un mensaje/motivo",
[80]="!drop          - Pateo silencioso con ban temporal",
[90]="!gag          - El usuario no podr? escribir en el chat principal nunca m?s",
[100]="!ungag          - El usuario podra escribir en el chat principal de nuevo",
[110]="!banip          - Baneo permanente de una IP (si el usuario est? offline)",
[120]="!unban          - Saca baneo de una IP o un nick",
[130]="!nickban          - Banea de un usuario offline",
[140]="!getbanlist         - Muestra lista de IPs baneadas",
[150]="!clrpermban         - Borra lista de baneados permanentes",
[160]="!clrtempban         - Borra lista de baneados temporales",
[170]="!op          - Da estatus temporal de operador a un usuario durante una sesi?n",
[180]="!getinfo          - Muestra informaci?n b?sica de un usuario",
[190]="!ipinfo          - Muestra todos los usuarios esten o no en linea con esa ip",
[200]="!iprangeinfo       - Muestra todos los usuarios esten o no en linea de un determinado rango de IPs",
[210]="!userinfo          - Muestra todas las visitas de ese usuario",
[220]="!restart            - Reinicia el hub!",
[230]="!restartscripts         - Reinicia los scripts",
[240]="!hconfig            - Muestra la configuraci?n actual del hub",
[250]="!hstat            - Muestras las estadisticas actuales del hub",
[260]="!info          - Muestra toda la informaci?n de un usuario",
[270]="!mass          - Envia mensaje masivo a todos los usuarios en mensaje privado",
[280]="!banner       - Envia un aviso o mensaje en el chat principal",
[290]="!sendhubad         - Envia mensaje de ayuda del Hub en el chat principal",
[300]="!talk          - Envia un mensaje en el chat principal sin que salga tu nick",
[310]="!online          - Comprueba si est? en linea un usuario",
[320]="!offline       - Deja un mensaje a un usuario offline (lo ver? cuando se conecte)",
[340]="!watch          - Activa vigilancia de un usuario sospechoso",
[350]="!watchoff            - Desactiva vigilancia",
[360]="!getwatch         - Muestra todas los vigilados",
[370]="!cmdspy          - Activa/Desactiva comando de vigilancia-esp?a",
[380]="!topkickers          - Muestra los m?s pateados del tu hub",
[390]="!tophubbers          - Muestra los usuarios que m?s se conectan al hub",
[400]="!sminslots       - Establece m?nimo de slots necesario",
[410]="!smaxslots    - Establece m?ximo de slots permitidos",
[420]="!smaxhubs    - Establece m?ximo de hubs a la vez permitidos",
[430]="!sratio       - Establece ratio de slots por hub",
[440]="!sminshare       - Establece m?nimo a compartir - unit = mb o gb",
[460]="!smaxshare    - Establece m?ximo a compartir en (mb/gb)",
[470]="!hminshare       - Establece hub minshare/unit (b/kb/mb/gb)",
[480]="!hmaxusr       - Establece el tope m?ximo de conexiones",
[490]="!hdesc       - Establece descripci?n del hub",
[500]="!chhubname       - Establece nombre del hub",
[510]="!regserver    - Establece direcci?n de registro del hub",
[520]="!redirect       - Muestra/Cambia reedirecci?n (teclea solo !redirect para mostrar)",
[530]="!redirectfull          - Establece que el hub redireccione a todos los usuarios que se conecten, cuando el Hub este lleno",
[540]="!autoredirect       - Establece que el hub redireccione a todos los usuarios que se conecten",
[550]="!hubprotect          - Establece protecci?n del hub on/off (los usuarios no podr?n descargar nada hasta que se registren)",
[560]="!getblocked         - Muestra los usuarios bloqueados (No pueden descargar/buscar/etc)",
[564]="!massblocked       - Env?e un mensaje a todos los usuarios bloqueados por P.M.",
[570]="!regreg       - Registra a un usuario como [Registrado]",
[580]="!regvip       - Registra a un usuario como [VIP]",
[590]="!regop       - Register user as [Operator]",
[600]="!regmaster       - Registra un usuario como [Master]",
[610]="!deluser          - Borra registro de un usuario",
[620]="!upgrade       - Actualiza estatus de usuario registrado a: reg/vip/op/master",
[630]="!getkicks            - N?mero de usuarios pateados",
[640]="!getwarns         - N?mero de advertencias a usuarios",
[650]="!resetcounters         - Resetea todos los contadores a cero",
[654]="!clear          - Clear logs of nick and unban nick",
[660]="!showiplog         - Muestra lista de IPs logeadas",
[670]="!showkicklog         - Muestra lista de nicks/IPs pateados",
[680]="!showbanlog         - Muestra lista de nicks/IPs baneados",
[690]="!showtimebanlog         - Muestra lista de tiempos de nicks/IP baneados",
[694]="!showwarnlog         - Show list of warned nicks/IP addresses",
[700]="!deliplog            - Borra la lista de IPs logeadas",
[710]="!delkicklog         - Borra la lista de pateados",
[720]="!delbanlog         - Borra la lista de baneados",
[730]="!deltimebanlog         - Borra la lista de tiempos",
[732]="!delwarnlog         - Delete the Warnlog list",
[734]="!showlog          - Show all logs of that Nick/IP (Just !showlog for all logged nicks)",
[740]="!rules            - Muestra las reglas del HUB",
[750]="!network            - Muestra la direccion del HUB, de la pagina web del HUB y el E-mail del HUB",
[760]="!faq            - Peque?o Tutorial, de como configurar el DC++",
[770]="!myip            - Muestra el n?mero de tu IP",
[780]="!myinfo            - Muestra toda mi informaci?n",
[790]="!version            - Muestra la version del script",
[800]="!regme          - Reg?strese usted mismo en el HUB (Ej: ?regme loco)",
[810]="!repass       - Cambia tu clave, solo (Reg/VIP/OP/Master)",
[820]="!showreg       - Muestra los usuarios de un determinado perfil (escribiendo solo !showreg mostrar? de todos los perfiles)",
[830]="!away       - Pon un mensaje de ausente",
[840]="!back            - Anuncias que dejas de estar ausente",
[850]="!getaways         - Muestra todos los mensajes de ausente (Solo Reg/VIPs)",
[860]="!report       - Informa de un faker a los operadores en un Privado",
[870]="!myhubtime         - Muestra tiempo que llevas en linea (Solo Reg/VIPs)",
[880]="!slots          - Muestra quien tiene slots libres",
[890]="!jump            - Muestra los reedireccionamientos de tu red",
[900]="!help            - Muestra los comandos habilitados para voz",
[910]="!inbuild            - Muestra los comandos habilitados para voz",
[920]="!asci            - Muestra los comandos ASCI",
}

[Millsy]

Originally posted by Cyberia

Originally posted by Millsy
i get run-time error 53 file not found when i try to clear the log files

Millsy

Check if the following files exist in the \logs directory
kick.log
ban.log
timeban.log
warn.log
iplogin.txt

If not exist, make a empty file for it.
Problem will be solved then i think.  :D

Worked Fine

Thanks,
Millsy

[Optimus]

About items 2 and 3 you misunderstand me. I'm not just referring to the TOP Stats. I like all of the text messages in the script to be put in a separate file, so I can translate them

mmm, now i'm sorry to say that i told before that i ain't gone do translation files. It makes the script to lazy it will use to much memory & cpu usage.