- RoboCop v4.0 - Testdrive 3 or Higher!

[Boostland]

That Mac DC++ clone is not really working at this time and has not been updated for some time.
I have seen a few users running the shakespeer client that has a Dcgui is about the best option atm and I have posted the download location on my motd, I have not seen many that have got it to work.
Tag security is a farce anyway the fakers clients can fake a tag and get by robocop anyway clients like DCDM can detect these users even if they have no tag.

[jiten]

Optimus, is it possible to limit the Away Message to x characters (for example, 300)?
It's that actual spammers use the !away command to flood and slow the hub (mainchat). And with Robocop 9b they can send an unlimited away message.

Thanks in advance,

jiten

[Madman]

Hi, Optimus

Could u add so when u use the getpass command, u also get the user profile to..
like..
Name: Madman Pass: Password Profile: Master

[uffetjur]

would be nice if u also included USER xxx is now registrated with PASS xxx  when registrating users
makes it easier for ops to copy-paste

[blackwings]

Originally posted by uffetjur
would be nice if u also included USER xxx is now registrated with PASS xxx  when registrating users
makes it easier for ops to copy-paste

RC 9.0b does already do that

[Madman]

Originally posted by blackwings

Originally posted by uffetjur
would be nice if u also included USER xxx is now registrated with PASS xxx  when registrating users
makes it easier for ops to copy-paste

RC 9.0b does already do that

No it dosent, it is when a user wants to be registed u see the password...

not when u type
!regvip test test
then u will see this
[07:59:14] <-=Destruction=-> The Master [DN]Madman registered test with profile [VIP], user is now registered with us!

[blackwings]

Originally posted by madman
No it dosent, it is when a user wants to be registed u see the password...

not when u type
!regvip test test
then u will see this
[07:59:14] <-=Destruction=-> The Master [DN]Madman registered test with profile [VIP], user is now registered with us!

Why should all the ops see the password off the new user?

[LoTeK_]

no, i think it's better as it is now, cause this message:
"[07:59:14] <-=Destruction=-> The Master [DN]Madman registered test with profile [VIP], user is now registered with us!"  will be seen by all users, not only ops, and if an op wants to get user password, it will be sufficient !getpass (if hubowner has enabled it for ops profile).

[QuikThinker]

I av a prob, My OPs cant delete VIP users. They can delete registered users but not VIPs. I've checked the protection table jus in case but they aint protected either. They can !regvip but then can't delete em lol
Apologies if this has already been mentioned.

Quik.

[Reefa]

Originally posted by Optimus Please take a look at the list and tell wich important bug fix i have forgot

Sup man,

Just wondering if you checked out the 'MO's being able to drop MA's' bug?

Also, a small reminder on a few features...

 - Being able to set tags for each profile, i.e. [MA], [MO] etc...

 - Disclaimer on/off for each profile...

 - !Kickblocked should actually kick, not just disconnect?

Cheers Opti

[Dr.Dubzilla]

Hi all...
I use Robocop 9.0b, i'd want to know a syntax for raw command to use for Autokick after list checking.
I use:

$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> ?kick %[nick]|

but with this syntax msg is:

The NetFounder Dr.Dubzilla kicked user 1 time(s) - Reason: No reason given!

I'd want reason appear there....thanks.
Dr.Dubzilla

[Optimus]

When using the Inbuild Client Kick the reason will not work it's a known problem.

Use !kick command instead and all will work fine, offcourse you need to change your RAW command a little.

Greetingz Optimus

[Dr.Dubzilla]

Originally posted by Optimus
When using the Inbuild Client Kick the reason will not work it's a known problem.

Use !kick command instead and all will work fine, offcourse you need to change your RAW command a little.

Greetingz Optimus

I'm not an expert in RAW command...what is this "little"?  :D

[Optimus]

I av a prob, My OPs cant delete VIP users. They can delete registered users but not VIPs. I've checked the protection table jus in case but they aint protected either. They can !regvip but then can't delete em lol
Apologies if this has already been mentioned.

After testing it works fine here. Default Operators can't delete vips. After i changed my deluser protection it all worked fine. please check your settings again. or experiment with it

[Madman]

Originally posted by Dr.Dubzilla
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> ?kick %[nick]|

change it to
$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|<%[mynick]> ?kick %[nick] %[clienttype] - %[cheatingdescription]|

Okey, im not so good at this either but this is how i have understood it....

$To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: %[clienttype] - %[cheatingdescription]|
This is the pm to the user beeing kicked...

<%[mynick]> is kicking %[nick] because: %[clienttype] - %[cheatingdescription]|
This is the msg to the status bar...

<%[mynick]> ?kick %[nick] %[clienttype] - %[cheatingdescription]|
This is the kick command...
note that  ?kick can be changed to !kick as Optimus said =)

[Andoz]

------------------------------------------------------------------------
I'm not an expert in RAW command...what is this "little"?  :D
------------------------------------------------------------------------

I use this raw command for kick and ban.
kick

$To: %[nick] From: %[mynick] $<%[mynick]> Update your client. I get this  %[clienttype] %[cheatingdescription]|<%[mynick]> !kick %[nick] %[clienttype]  %[cheatingdescription]|

ban

$To: %[nick] From: %[mynick] $<%[mynick]> You are being banned because: %[clienttype]|<%[mynick]> !ban %[nick] %[clienttype]  %[cheatingdescription]|

You can modify then as you want....

[Dr.Dubzilla]

Thanks a lot all ! i'll try them soon...

[Dr.Dubzilla]

Hi again, i've set this RAW commands:

$To: %[nick] From: %[mynick] $<%[mynick]> Update your client. I get this %[clienttype] %[cheatingdescription]|<%[mynick]> !kick %[nick] %[clienttype] %[cheatingdescription]|

ban

$To: %[nick] From: %[mynick] $<%[mynick]> You are being banned because: %[clienttype]|<%[mynick]> !ban %[nick] %[clienttype] %[cheatingdescription]|

i've put them too into favorites of Hub, but when kick or ban someone i get disconnect from my hub... ?(

[LoTeK_]

your client will disconnect if raw command is wrong..check sytax

[LoTeK_]

ops..syntax

[uffetjur]

Have set this addy under "safe advertise: dvd-norrland.no-ip.com
Robocop still kicks for it

[Optimus]

Have set this addy under "safe advertise: dvd-norrland.no-ip.com
Robocop still kicks for it

Edit: yups there is a small problem, gone fix it.

[imby]

Optimus do you know why i keep seeing this user in the temp ban list?

IP: 195.158.146.xxx
Last Nickname: RoboCop/NRW

[blackwings]

Originally posted by imby
Optimus do you know why i keep seeing this user in the temp ban list?

IP: 195.158.146.xxx
Last Nickname: RoboCop/NRW

I don't have that, are you sure it isn't a user with that name and gets kicked all the time :P

[QuikThinker]

I keep getting that user in mine aswell.