- RoboCop v4.0 - Testdrive 3 or Higher!

[QuikThinker]

It could be another script that's causing the problem NOT Robocop.

[Shegman]

I use to use robobcop 8, i had no problems withit atall
since using 9 a then b every1 cant get in my hub because it says. Do not fake slots number, wen no1 is.
Im loosing users. i havnt dun anything rong i dont have lots ratio or anything enabled.

[Optimus]

I use to use robobcop 8, i had no problems withit atall
since using 9 a then b every1 cant get in my hub because it says. Do not fake slots number, wen no1 is.
Im loosing users. i havnt dun anything rong i dont have lots ratio or anything enabled.

Calm down lol. That message is from Ptokax hub soft, not RoboCop related.
Goto advanced options in ptokax and then disable Additional Slots Check

[Shegman]

Thank you so much optimus.
It was ticked your right.
1 last problem. iff i run the new hub deflood 4.5.1 that comes with robocop 9. When people log in there ips and the date and time comes up. thats really annoying, any way i can fix it. illd be very grateful

[Shegman]

*** Error missing profiles, Install the provided profiles.dat that can be found in folder scripts/profiles!
 Why does it say this. what do i have to do with the dat files inside profiles folder.

[Optimus]

1 last problem. iff i run the new hub deflood 4.5.1 that comes with robocop 9

Use this new 1 all fixed. Download deflood4.5.4.lua

[Optimus]

*** Error missing profiles, Install the provided profiles.dat that can be found in folder scripts/profiles!
Why does it say this. what do i have to do with the dat files inside profiles folder.

Attention: Install the provided profiles.dat that can be found in folder /profiles other the script will not work!!!!!!!!!!!!
  Pick the 1 you need from the folder Example: folder TD4 keeps the profile.dat for Testdrive 4 Etc.

You need to overwrite it with the 1 in the Ptokax program folder. Copy the file when your hub is not running closed i mean. after that start youor hub and all will be fine.

[Kwartje]

Originally posted by LoTeK_

Originally posted by Kwartje
when i tupe !restartscripts i get the following msg <[IMII]BOT> *** You are not allowed to use this command!

none of my masters are able to use tht command, while all cmds are enabled for them...

Check commands protections under robocop gui, and put a flag on each command on each profile you want to be allowed.

TNX, this did fixed the prob for my vips, they can give out warnings now..

but it still is of no use for the restartscripts cmd, as it can't be found under protection...  under the commands tab all options for master are enabled...

is the resart script command also enabled in the profile settings for masters in ptokax?

yep, masters have all cmds available..

[Shegman]

Iff u have msn can u add me. nw10@msn.com

[Shegman]

I copied the Prfile .dat from the Td4 folder the the ptokax program folder and moved the old 1 now theres no more errors. I got the new defloo 4.5.4 u gave me but its the same thing. When the user logs it comes up like this Name. Ip. Date. Time
Thats very annoying. and they complain saying why does there ip come up. i want it so when users and regs sign in nuthing comes up. i havnt got a entrance message for them but there ip and stuff still cums up. pls help. that is my last problem

[Optimus]

RoboCopv9.0c

- Fixed small error in !hconfig
- Fixed !tophubbers for Regs/Vips
- New Client Detection Check   --> Try Out
- Now Allowed Client List & Deny Client List
- Added Automatic Client detection
- Added command !addclient for above function
- !warn command is now linked to the !kick command & kickcounter (seems nice now)
- Fixed bug in commands data
- Changed !drop temporery kick TO silent disconnect
- Tag hidder can't be disabled anymore because of security reasons
- Rewritten the !clear command
- Fixed small typo error in !jump command
- Added !unbot to unregister old botnames
- Added remote command !slimiter to set bandwidth limit for each profile
- !kickblocked disconnect changed TO kick
- Added check against double MyInfo Tag
- Fixed Safe-Advertise check
- Updated UserInfo a little more
- Rewritten some code in command settings
- Minshare, Maxshare, minslots, maxslots, maxhubs, slotsratio Table files are changed to other format.
- Added Profile: part to !getpass command

The Robocop.exe is now build in a differnt way. The meaning of this is the errors that some people have using the *.exe file
There for i hope that the result maybe better this time. But on the other hand i haven't tested it fully so maybe the menu stops running hehehe. Please let me know.

Greetingz Optimus

[uffetjur]

Getting this error in RC 9b:

 *** Command is temporery disabled!

while using report funktion

And cant see it fixed in RC9c

[Optimus]

Yups true still needs tobe done but that i wanne do that for a other version called [X] or 10.

This is mainly a bug fix version with some new/changed functions that where verry important.

I specialy didn't added to much new stuff because people asked me to make this 1 stable first before proceding with new stuff etc.

So that means there is still a list with things todo.

Greetingz Optimus

[uffetjur]

Well theres always a possibility to send ops a PM

And as always, Great work Opti

still wonders if RC X will be scripted in LUA 5

[Optimus]

still wonders if RC X will be scripted in LUA 5

Yes i'm wondering to, but i'm going with the flow so as long as there is no offical new Ptokax version out i will keep on writting in lua4.0

So when the new hubsoft comes out there will be a delay cause then i'm gone rewritte it. That with testing and bug hunting will cost me 2a3 weeks.

l8trs

[mOrrI]

hello Opti

nice going once again with this new version...

but i got a question....
i notice that robocop checks manythings....

so the question is...
is it needed to use a client like rmDC????

thanks in advance......  

[Optimus]

Yes i still advice to use DCDM++ or something like that. Specialy for clients that lay about there indentity or for fake shares.

Greetingz Optimus

[blackwings]

hmm, someone was talking about a bug in the mldc blocking, is it fixed in RC9.0c? and does rc 9.0c also block edonkey?

[uffetjur]

About allowed / denied clients list, DCDM uses an update function for known client tags, is that something u can implement in RC?

[Optimus]

hmm, someone was talking about a bug in the mldc blocking, is it fixed in RC9.0c?

Never had any problems with that and haven't heard it either.

[Optimus]

About allowed / denied clients list, DCDM uses an update function for known client tags, is that something u can implement in RC?

RoboCopv9.0c is automaticly adding new clients if found. A Question will be send to the choosen profile and client will be added
Command: !addclient  (only works when a new client is found)

There are clients like Phantom DC++ that have the following tag

<.P>Tum Di Dum<++ V:0.306,M:A,H:0/1/5,S:4>

As you can see there is also <++ in there tag so they are now requnized as DC++ based clients cause only the minversion is important

[uffetjur]

zitat
but i got a question....
i notice that robocop checks manythings....

so the question is...
is it needed to use a client like rmDC????

Hopefully that will never be included in RC because use of bandwith reasons!
Its much better to let ops run DCDM for  searching fake shares and not allowed files

[mOrrI]

Originally posted by Optimus
Yes i still advice to use DCDM++ or something like that. Specialy for clients that lay about there indentity or for fake shares.

Greetingz Optimus

thanks for the info Opi  )

[Optimus]

yw

[blackwings]

Originally posted by Optimus

hmm, someone was talking about a bug in the mldc blocking, is it fixed in RC9.0c?

Never had any problems with that and haven't heard it either.

This quote is from the other LUA forum =

Originally posted by Pothead
My hubs just got full with MLDC clients, even though these are set to reject.  I am using Robocop 9.0b.  The problem seems to involve these to symtons:

1.  
The tick (in PtokaX\Scripts) has disappeared from Robocop, signifying it is no longer running :(.

2.
Syntax error: invalid control char;
  last token read: `0x00' at line 1 in file `logs/counter.txt'
stack traceback:
   1:  function `dofile' [C]
   2:  main of file `Robocop\RoboCopv9.0b.lua' at line 75
   3:  main of (luac)

Syntax error: assertion failed!  logs/counter.txt not found
stack traceback:
   1:  function `assert' [C]
   2:  main of file `Robocop\RoboCopv9.0b.lua' at line 75
   3:  main of (luac)

(The counter files seems to be full of spaces instead of text. :S