- RoboCop v4.0 - Testdrive 3 or Higher!

[mOrrI]

helloo again,

is there any standalone script made for that?????

and Opti can i only copy the lua file and the exe of the new version of robocop????

[blackwings]

Originally posted by mOrrI
helloo again,

is there any standalone script made for that?????

and Opti can i only copy the lua file and the exe of the new version of robocop????

hmm, dunno, but I don't think its to hard to make, so make a request about it ^^

[imby]

"No syntax errors in script file RoboCopv9.0f.lua"

cheers Optimus, working good.

[Optimus]

hehe normaly i would say thanks, you will see at the moment i do that a error pups up. lol

[Pothead]

Originally posted by uffetjur
Nice to hear about your plans for lua 5.0, if that also means that we are close to the so long waited release of the new hubsoft! if so its a greate x-mas gift for us all!

New PtokaX is available at the moment for scripters apparently.  So touch wood, it shouldn't be too much longer for the release .

Hope you are feeling better Optimius.

[gOOfus]

Since tags from Operators are also checked now, did you add the ability to Immune?  I have a couple of Ops with MAC systems and can't get any of the Tag enabled MAC DC clients to work for them.

[Quattro]

Originally posted by Pothead

Originally posted by uffetjur
Nice to hear about your plans for lua 5.0, if that also means that we are close to the so long waited release of the new hubsoft! if so its a greate x-mas gift for us all!

New PtokaX is available at the moment for scripters apparently.  So touch wood, it shouldn't be too much longer for the release :).

Hope you are feeling better Optimius. :)

what makes you jump to the conclusion that theres a lua 5.02 enabled hub available for all scripters?
lua 5.02 is a separate script language, isn't fixed to ptokax only.
As a matter of fact there are several clients which support lua 5.02 for quite a long time now


***
EDIT

if rumour then jump to conclusion, else do nothing....
:P

[Pothead]

Originally posted by Quattro

what makes you jump to the conclusion that theres a lua 5.02 enabled hub available for all scripters?
lua 5.02 is a separate script language, isn't fixed to ptokax only.
As a matter of fact there are several clients which support lua 5.02 for quite a long time now


***
EDIT

if rumour then jump to conclusion, else do nothing....
:P

Jumped to conclusions ?? Someone mentioned earlier that PPK wouldn't give them it, but some scripters had it.  Yeah, there are other hub software but PtokaX is the one which, as far as i know, is the most used script compatable one.

[Quattro]

i meant not all the scripters have the new ptokax, you made it sound that way.....
just some of them to help plop developing, i believe he meant they helped him from the beginning

[Optimus]

just a few people have it to test it. And yes they are scripters. You can count them on 1 hand.

But it's still not finished there is still alot of work todo they told me. I know there working very hard

I'm just rewritting my bot so when it comes out you all users can directly start using the new hubsoftware togheter with my new Robocop-lua5.02

Other you have to wait for a while before i have finished the new robocop. And i don't think that that is what you all want.

Other aspect is that we need to fine some errors or other stuff for them to make it work well. Before it can be released to the public

Greetingz Optimus

[BoJlk]

Any advice?
i've replaced the RC's *.exe/*.lua/settings.ini files
from v9.0e to v9.0f version.
and got an error:



  ?(  ?(  ?(

/edit
Optimus can you tell me wich files exactly need's to be replaced when upgrading to v.9.0f???
I can't do another Clean install (too much to click)

[Pothead]

Clean install.
i.e. delete the old stuff.  Some of the txt files are probably alright to keep.

[blackwings]

I wonder why people ask the thing about just changeing the .exe and .lua. Do always make a clean install, it goes so fast to do it.

[Quattro]

i believe you must copy the tbl directory along with it

[blackwings]

Originally posted by Quattro
i believe you must copy the tbl directory along with it

tired m8? I wasn't asking for what files that needed to be copied, I just stated that people should always make a clean install.

[BoJlk]

Well replacing the tbl directory
it's the same as making a Clean install...

[Quattro]

hehehe wasn't reacting on your post but on the post about the error but he is right
replacing tbl directory means almost as much as a clean install
 

[Andoz]

Still cant make the tempOP to work

[00:15] <-=BonnaFan=-> *** You've got temporal Operator status
[00:15] <-=BonnaFan=-> *** [SU]Andoz sets mode Operator: user Lina
[00:15] <-=Tjuven=-> *** You are not allowed to use this command!

And the command was ordinary kick from searsh-window

One more thing is the safe advertice it dont work to, i think. I put as safe andoz.no-ip.com
but the user get [00:08] <-=Tjuven=-> The user baloba is kicked 1 time(s) - Reason: Advertising Address - andoz.no-ip.com

Iam using.
Fresh install of This hub is Powered by RoboCop? v9.0f - Created by Optimus?
PtokaX DC Hub 0.3.3.0 build 15.25

[imby]

Originally posted by Andoz
Still cant make the tempOP to work

[00:15] <-=BonnaFan=-> *** You've got temporal Operator status
[00:15] <-=BonnaFan=-> *** [SU]Andoz sets mode Operator: user Lina
[00:15] <-=Tjuven=-> *** You are not allowed to use this command!

And the command was ordinary kick from searsh-window

One more thing is the safe advertice it dont work to, i think. I put as safe andoz.no-ip.com
but the user get [00:08] <-=Tjuven=-> The user baloba is kicked 1 time(s) - Reason: Advertising Address - andoz.no-ip.com

Iam using.
Fresh install of This hub is Powered by RoboCop? v9.0f - Created by Optimus?
PtokaX DC Hub 0.3.3.0 build 15.25

both are confirmed.

tryed to kick someone using the inbuild kick and !kick and neither work.

[imby]

Syntax error: bad argument #1 to `gsub' (string expected, got nil)
stack traceback:
   1:  function `gsub' [C]
   2:  function `GsubObjects' at line 638 [file `Robocop\RoboCopv9.0f.lua']
   3:  function `WelcomeMessage' at line 632 [file `Robocop\RoboCopv9.0f.lua']
   4:  function `OpDisconnected' at line 282 [file `Robocop\RoboCopv9.0f.lua']

Syntax error: bad argument #1 to `gsub' (string expected, got nil)
stack traceback:
   1:  function `gsub' [C]
   2:  function `GsubObjects' at line 638 [file `Robocop\RoboCopv9.0f.lua']
   3:  function `WelcomeMessage' at line 632 [file `Robocop\RoboCopv9.0f.lua']
   4:  function `OpDisconnected' at line 282 [file `Robocop\RoboCopv9.0f.lua']

sorry, dunno what caused it =)

[gazzer]

merry xmas to one and all..........bowl of trifle anyone? or a turkey sarnie hehehhe.

wel either way uknetwork wishes all of you a merry xmas and opti......get well soon buddy.

[Optimus]

One more thing is the safe advertice it dont work to, i think. I put as safe andoz.no-ip.com
but the user get [00:08] <-=Tjuven=-> The user baloba is kicked 1 time(s) - Reason: Advertising Address - andoz.no-ip.com

Okey i will look into it

Syntax error: bad argument #1 to `gsub' (string expected, got nil)
stack traceback:
   1:  function `gsub' [C]
   2:  function `GsubObjects' at line 638 [file `Robocop\RoboCopv9.0f.lua']
   3:  function `WelcomeMessage' at line 632 [file `Robocop\RoboCopv9.0f.lua']
   4:  function `OpDisconnected' at line 282 [file `Robocop\RoboCopv9.0f.lua']

Syntax error: bad argument #1 to `gsub' (string expected, got nil)
stack traceback:
   1:  function `gsub' [C]
   2:  function `GsubObjects' at line 638 [file `Robocop\RoboCopv9.0f.lua']
   3:  function `WelcomeMessage' at line 632 [file `Robocop\RoboCopv9.0f.lua']
   4:  function `OpDisconnected' at line 282 [file `Robocop\RoboCopv9.0f.lua']

Euhh hum hum

- Changed intro/outro to [Ip], [Profile], [Hub], [Name] (because some intros where not displayed right)

^^^ I think it has todo with that you have to check it or play with it somemore. If you can't get it to work let me know

[Optimus]

Yups about the TEMP OP he can't use the $inbuildkick true. Maybe i will change it hehe

It's noted on my list now

[Optimus]

One more thing is the safe advertice it dont work to, i think. I put as safe andoz.no-ip.com
but the user get [00:08] <-=Tjuven=-> The user baloba is kicked 1 time(s) - Reason: Advertising Address - andoz.no-ip.com

Mmmm i have tested it and i don't see any problem yet. Could you paste me the line you use when you are being kicked so i can test it to. Thank ;)

MY TEST:

andoz.no-ip.com
hello andoz.no-ip.com dsfsdd
heloandoz.no-ip.comdfd

Greetingz Optimus

[imby]

Originally posted by Optimus

One more thing is the safe advertice it dont work to, i think. I put as safe andoz.no-ip.com
but the user get [00:08] <-=Tjuven=-> The user baloba is kicked 1 time(s) - Reason: Advertising Address - andoz.no-ip.com

Okey i will look into it

Syntax error: bad argument #1 to `gsub' (string expected, got nil)
stack traceback:
   1:  function `gsub' [C]
   2:  function `GsubObjects' at line 638 [file `Robocop\RoboCopv9.0f.lua']
   3:  function `WelcomeMessage' at line 632 [file `Robocop\RoboCopv9.0f.lua']
   4:  function `OpDisconnected' at line 282 [file `Robocop\RoboCopv9.0f.lua']

Syntax error: bad argument #1 to `gsub' (string expected, got nil)
stack traceback:
   1:  function `gsub' [C]
   2:  function `GsubObjects' at line 638 [file `Robocop\RoboCopv9.0f.lua']
   3:  function `WelcomeMessage' at line 632 [file `Robocop\RoboCopv9.0f.lua']
   4:  function `OpDisconnected' at line 282 [file `Robocop\RoboCopv9.0f.lua']

Euhh hum hum

- Changed intro/outro to [Ip], [Profile], [Hub], [Name] (because some intros where not displayed right)

^^^ I think it has todo with that you have to check it or play with it somemore. If you can't get it to work let me know

Hi, that bit was set to default, haven't edited yet. so dunno what's caused it.

"[2004-12-26 00:51] You are kicked 1 time(s), get 3 and you are banned! - Reason: Advertising Address - myhubaddress.no-ip.com - Complaints or help? Go to: http://mymessageboard"

Is what i got.