- RoboCop v4.0 - Testdrive 3 or Higher!

[gazzer]

hi bud, ok here goes.............
been of dc a bit, so opened a new ptokax hub and ya latest scripting.
because it was a new setup as new op sys, i had to reop all ops admins etc etc..........
when a few logged in after me reggin em via right clicks it had a weird effect bud. two sets of ops had there nikks joined, also had seperate nicks showing in main mind. also a key showed up in ops list with no user beside it
a hub reboot clears it, but couldnt see if it was hub or script related.
could you pop into jukeboxjury.no-ip.org bud and see for yaself maybe

hope ya can sort it, as i know ya hate faults hehehehe
regards gazz

[Optimus]

hi bud, ok here goes.............
been of dc a bit, so opened a new ptokax hub and ya latest scripting.
because it was a new setup as new op sys, i had to reop all ops admins etc etc..........
when a few logged in after me reggin em via right clicks it had a weird effect bud. two sets of ops had there nikks joined, also had seperate nicks showing in main mind. also a key showed up in ops list with no user beside it
a hub reboot clears it, but couldnt see if it was hub or script related.
could you pop into jukeboxjury.no-ip.org bud and see for yaself maybe

hope ya can sort it, as i know ya hate faults hehehehe
regards gazz

oki i reported it to ppk, he will look into it.

- Optimus

[LoTeK_]

Originally posted by Star
I wold like it to be that the command don't stops\resets, when the user goes offline, to...
We use the command for a reson and if the user goes offline and online again it's no use of the command.

Yes, a good idea, a suspects list, when such a user connect, his actions can be monitored.

I don't like the idea that OP and Mod can use this command.

Then disable this command for OPs and Mods in your GUI, but let other staff teams to decide what they would like to do.

[Optimus]

hi opti, i am getting a prob with ops being regged as new setup and when they come in its showing two ops on same line in hub???
any ideas please m8eee

DemodredGeophrum with a spare key above where it hasnt assigned sep line to each.
thx gazzer

Fixed: addreguser bug on adding user with OP status (thx Optimus for report).

[gazzer]

hi opti,
so was hub prob i assume then?. do you know if he has released a newer version or a fix for it bud.

thx btw for the prompt help you have supplied.
dont know any other community that helps out in such a way.

[blackwolf]

Deleted....My problem is gone  :D

[Optimus]

hi opti,
so was hub prob i assume then?. do you know if he has released a newer version or a fix for it bud.

thx btw for the prompt help you have supplied.
dont know any other community that helps out in such a way.

If problem serious  enough (couch couch) then help or support is on it's way. hehe

[Optimus]

Deleted....My problem is gone :D

Would be cool that everybody solves there problems like you do, hehe (joking)

[blackwolf]

Hi Optimus!
Robocop 10.01e I do not work with rmDC ++ v.0.403D [1] with such client not I can to go on the hub yet I shall not put emulation DC ++. How it is possible to correct this problem???? Help me please. Beforehand thanks. :(
p.s.minversion I registered in a file and does not help.  ;(


[11:26:32] *** Connect 192.168.19.46:412...
[11:26:32] *** ?????????
[11:26:33] You are disconnected for using a none regonized client, please download a regular DCPlusPlus client at http://dcplusplus.sourceforge.net - 192.168.19.46
[11:26:33] You are redirected to 192.168.0.1:411.
[11:26:33] *** Disconnected


 ;(

[PPK]

Originally posted by blackwolf
Robocop 10.01e I do not work with rmDC ++ v.0.403D [1]

Is not Robocop, is PtokaX. rmDC++ is buggy shit using DC++ code without releasing own. Have verry buggy DC protocol support, and not working with PtokaX corectly

Originally posted by blackwolf
How it is possible to correct this problem????

Use better and real DC client

[blackwolf]

Originally posted by PPK

Originally posted by blackwolf
Robocop 10.01e I do not work with rmDC ++ v.0.403D [1]

Is not Robocop, is PtokaX. rmDC++ is buggy shit using DC++ code without releasing own. Have verry buggy DC protocol support, and not working with PtokaX corectly :P

Originally posted by blackwolf
How it is possible to correct this problem????

Use better and real DC client :D

hm... And, without Robocop all works... :D

[Jacko]

Hiya
hope one of you can help..I would like to send mass msg to non regs only so if  !mass what is the profile name for non regs please..I dont want to keep bothering regs vips ops etc

[Tw?sT?d-d?v]

Originally posted by Jacko
Hiya
hope one of you can help..I would like to send mass msg to non regs only so if  !mass what is the profile name for non regs please..I dont want to keep bothering regs vips ops etc

Just tested and worked for me .... Try   user

[Jacko]

DOH

thanks jay....I feel foolish now

[Tw?sT?d-d?v]

Originally posted by Jacko
DOH

thanks jay....I feel foolish now

lol   nps m8

[Mucking_Fagic]

Hi all and may i first say hi to all those involved in making robo an excellent script, i have however been having a few problems,
1. When i upgraded from the 10.01d to 10.01e i found that not only had my settings been erased but my files etc had also gone including profiles, i managed to resolve this and yes i had just pasted the exe files and other relvant updates into existing folder.
2. Once i had rectified the above robo errors i rebooted system to find that mldc clients were getting into hub even though they werent before, i have had to make changes to script to minimise this, i.e. min share above 11mb.
3. In my hub it doesnt seem to make a dif if search and download is selected as i have 50+ users in my hub wihtout reg'd and they are all able to download from me, is this a bug or is this something i am doing? i only ask as the search/download feature has change and is now just a tick box unlike in previous versions, if these are known probs and if so when is an update going to be available?

Like i said before this is an excellent script and i hope i haven't offended anyone as this is not my intention, i just wanted to bring these points to your attention

uk-pride.no-ip.org
mailto:3-lions@blueyonder.co.uk

[(-=TrIp-iN-SuN=-)]

same one can help to tell me what file is it?

it's type me?

                Run-time error '53'

                File not found

[jiten]

Originally posted by (-=TrIp-iN-SuN=-)
same one can help to tell me what file is it?

it's type me?

                Run-time error '53'

                File not found

It's almost impossible to tell what file is missing. Try a fresh install of Robocop. It may solve this problem. Currently, I don't have a better idea

Best regards,

jiten

[Doobert]

Mucking fagic wrote

3. In my hub it doesnt seem to make a dif if search and download is selected as i have 50+ users in my hub wihtout reg'd and they are all able to download from me, is this a bug or is this something i am doing? i only ask as the search/download feature has change and is now just a tick box unlike in previous versions, if these are known probs and if so when is an update going to be available?

Have you set up the actions tab on the user profile to stop downloads etc?
You can now do it for each profile!

[-PT-B2S]

Hello, i wanna know if there is any chance to create another profile. i want to create a new profile called VIP++ . this profile has the same permissions os the VIP profile, but the user has no share/slots control, cause i have a minimum share to VIP's. I tried to Create this profile in the moderator profile. It works fine, but when i change the name to VIP++ it appears in the hub :

*** Error profile Moderator corrupt or missing! Install the provided Profiles.xml that can be found in folder: scripts/profiles!

But it works fine anyway :) the only problem is this chat message that appears all the time, cause the permissions and the profile commands are right :)

If there is any chance, tell me please.

Thanks

Props

[gazzer]

set them up as moderators then so they can be junior ops in hub basically..........call it training lol

end of day, vip's are there as on trust i am assuming, so remove slot hub ratio on vips but alter there rules explaining what they are in and what for. i have mine on 2gb min and no checks on hubs or slots.........havnt had a prob in over 3 months as they know score and dont take pee out of it.

opti i am assuming is extremely busy ensuring hub and script work nicely in unison.(keep up the good work bud)

[Star]

This is a good idea -PT-B2S.
Optimus. I whould be nice to se so RoboCop can handle profiles that users make on ther own in PtokaX. And then u can edit them in RoboCop.exe
For a start just the "Profile > Command" part. An a extra function that make the "Profile > Actions" part lookalike an other profile.
This should be good for VIP++, external bots and more.
Example: Profile VIP++ uses VIP "Profile > Actions" stuff
Example: Profile OP+ uses OP "Profile > Actions" stuff

btw. Could u add a command to clear the tophubbers?
And on RoboCop exit window, a "Exit without saving" button would be nice.

Thanks
//Star

[Quattro]

we get this error in a hub of ours...
normally i would probaly know what the problem is but i didn't had the chance to upgrade my hub to newest ptokax and robo...

Robocop\DataArrival.lua:2: attempt to index field `?' (a nil value)  
- Robocop\RoboCopv10.01e.lua:448: attempt to index field `?' (a nil value)  
- Robocop\DataArrival.lua:2: attempt to index field `?' (a nil value)

and the gag command is fun and all, but when someone reconnects its reset just like te watch command....

[Doobert]

This is a stupid question and by now I should probably know better BUT
If I enter something in the bad nick list does it only apply to those with the profile user? For example if i entered [Reg] and all my registered users have [Reg] at the front of their nick will it still let them in?
Dont want to try it as it will upset a few people if it goes wrong :D

[Flux]

Hi Optimus

Well yesterday I finally converted my hub to LUA5, so this means I am using Ptokax 0.3.3.0 build 17.08 (Debug) & RCv10.01e.

Well once again there has been many changes the way the hub runs but also the way the hub looks, which I have to get used to or lump it hehehe..

I had to get help from Timetraveller as I had one liitle minor problem, which thankfully he sorted it for me..

Anyway I would like to say thanx to you and Timetraveller for the excellent work you have acheived by bringing us the best & putting Ptokax & Robocop 10 a no.1 choice for me & others in this forum and else where.

If I have any probs or comments I will sure come to you or Timetraveller for advise.

Thanx again