- RoboCop v4.0 - Testdrive 3 or Higher!

[Aztek]

i read somewhere that minshare was broken

add minshare in ptokax console?

----

and i have been getting these

Robocop\DataArrival.lua:17: attempt to compare nil with number

[Doobert]

Originally posted by Aztek
i read somewhere that minshare was broken

add minshare in ptokax console?

----

I am not having any problems with minimum share settings in RC 10.01b

[Optimus]

Still having a problem with reg/users getting in with less than minshare.
Script is set to:
? Profile Reg : minslots: 1, maxslots: off, maxhubs: 60, ratio: off/off, minshare: 12 GB, maxshare: 500 GB

Yups minshare is broken in away, it's the disconnect that is not working allright.

Robocop\DataArrival.lua:17: attempt to compare nil with number

It's SlotRatio problem you need to upgrade slotratio.tbl file

Our host just told me that when he tries to add a new min version to the list, he gets "please enter a numeric value for the minversion" every time he types in a number.

Have no probs here adding minversions

just one other thing. u know on right clicks, other ,send mass message just wandered if there was a way to only send that to non reg users or every one else part from ops?? cos my ops get fed up with it lol. co si use mass message to remind ppl to register!

I'm gone make new mass message system in future that will work for none registerd users also

- Optimus

[jadehenry04]

Originally posted by gazzer
can do mass on auto in pm via sendhubad. and if your ops have the igone messages from bots turned off they wont see it.

then again, if any important announcments they will miss or kicks that have happened.

yeah but were is this ignore thing from bots to??

[jadehenry04]

Originally posted by gazzer
can do mass on auto in pm via sendhubad. and if your ops have the igone messages from bots turned off they wont see it.

then again, if any important announcments they will miss or kicks that have happened.

yeah but were is this ignore thing from bots to??

[gazzer]

thats in your client settings

[jadehenry04]

Originally posted by gazzer
thats in your client settings

wats that?? in my dc++?? im confused*

[Herodes]

Originally posted by jadehenry04

Originally posted by gazzer
thats in your client settings

wats that?? in my dc++?? im confused*

yes .. in the File>Settings... look closer if you dont find it ;)

[jadehenry04]

Originally posted by Herodes

Originally posted by jadehenry04

Originally posted by gazzer
thats in your client settings

wats that?? in my dc++?? im confused*

yes .. in the File>Settings... look closer if you dont find it ;)

cheers xx think i got it not sure though lol << blonde  he he

[aL1en]

hello Optimus,

i got a question about the +tophubbers command...

some time and versions ago, it used to count all the users on the tophubbers..  after i install robocop9 , it started count only OP's in there, can u tell me if i missed to mark any checkbox? or maybe u changed some on the way its counting now?

Thnx for ur time.
L1

[Tw?sT?d-d?v]

Originally posted by aL1en
hello Optimus,

i got a question about the +tophubbers command...

some time and versions ago, it used to count all the users on the tophubbers..  after i install robocop9 , it started count only OP's in there, can u tell me if i missed to mark any checkbox? or maybe u changed some on the way its counting now?

Thnx for ur time.
L1

tophubbers working ok here m8   robo 10b

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
	   Nr.		Total Time:			Session Time:	Enterd Hub:		Left Hub:   		Status:	Name:
	????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
	   1.	0 months, 0 days, 22 hours, 37 minutes		 216 min		03/26/05 07:44:47		03/25/05 16:47:34		*Online*	(uk)jay
	   2.	0 months, 0 days, 22 hours, 36 minutes		 216 min		03/26/05 07:45:00		03/24/05 21:47:52		*Online*	(uk)-Titch
	   3.	0 months, 0 days, 22 hours, 35 minutes		 214 min		03/26/05 07:46:12		03/25/05 16:08:57		*Online*	SATAN
	   4.	0 months, 0 days, 22 hours, 35 minutes		 215 min		03/26/05 07:45:52		03/24/05 21:47:46		*Online*	[UK]lyn
	   5.	0 months, 0 days, 22 hours, 30 minutes		 216 min		03/26/05 07:44:41		03/25/05 09:10:02		*Online*	remaster-it
	   6.	0 months, 0 days, 22 hours, 29 minutes		 216 min		03/26/05 07:44:44		03/25/05 11:28:08		*Online*	denbod
	   7.	0 months, 0 days, 22 hours, 25 minutes		 215 min		03/26/05 07:45:35		03/25/05 14:45:48		*Online*	boozy
	   8.	0 months, 0 days, 21 hours, 58 minutes		 95 min		03/26/05 09:46:02		03/26/05 09:44:03		*Online*	THE-BETTER-HALF
	   9.	0 months, 0 days, 14 hours, 32 minutes		 240 min		03/25/05 12:47:16		03/25/05 12:45:54		*Offline*	(UK1)LAMPOON
	   10.	0 months, 0 days, 10 hours, 42 minutes		 123 min		03/25/05 14:44:17		03/25/05 14:44:16		*Offline*	UK-Sue
	   11.	0 months, 0 days, 10 hours, 33 minutes		 215 min		03/26/05 07:45:57		03/25/05 09:49:12		*Online*	busty
	   12.	0 months, 0 days, 9 hours, 2 minutes		 120 min		03/26/05 09:20:47		03/25/05 09:46:06		*Online*	(?`-Withers-_)
	   13.	0 months, 0 days, 1 hours, 45 minutes		 0 min		03/25/05 16:25:48		03/25/05 16:25:55		*Offline*	cass
	   14.	0 months, 0 days, 0 hours, 13 minutes		 13 min		03/25/05 15:10:49		03/25/05 15:23:21		*Offline*	[FIN]Raul
	   15.	0 months, 0 days, 0 hours, 3 minutes		 3 min		03/25/05 12:49:11		03/25/05 12:53:05		*Offline*	PwK

[badtrip]

hello

i from portugal and in portugal whe have
a dc++ version ( PTDC++ ) robocop dont
acept this version, can you help me ?

[imby]

Originally posted by badtrip
hello

i from portugal and in portugal whe have
a dc++ version ( PTDC++ ) robocop dont
acept this version, can you help me ?

http://board.univ-angers.fr/thread.php?threadid=4024&boardid=28&styleid=1&sid=28e9797e9c710296f78941b4c50eb842

[jadehenry04]

one of my hubs in my network gets this when he trys to open robo?? any ideas any 1 all is appreciated :)

the application faifed to initialize properly (0xc0000135).click on ok to terminate the application

[Herodes]

Originally posted by jadehenry04
one of my hubs in my network gets this when he trys to open robo?? any ideas any 1 all is appreciated :)

the application faifed to initialize properly (0xc0000135).click on ok to terminate the application

RTFM.... refer to Readme.txt found in the robo package ..

( I wish robo had its own section on this board and stuff like this could go in a sticky )

[jadehenry04]

Originally posted by Herodes

Originally posted by jadehenry04
one of my hubs in my network gets this when he trys to open robo?? any ideas any 1 all is appreciated :)

the application faifed to initialize properly (0xc0000135).click on ok to terminate the application

RTFM.... refer to Readme.txt found in the robo package ..

( I wish robo had its own section on this board and stuff like this could go in a sticky )

yeah cheers m8 :)
he needed the frame works :) xx

[diabolik]

Hello optimus...... I wanted to know if function for tag multiple customers were possible to insert in Robocop 10 one;
as there was in Robocop 8...  that one that one allowed of tares one tag to the VIP to the Operator and other!!
Me it would be truly useful... thanks  :D

[jadehenry04]

Originally posted by Ricky12
I keep getting this is main chat:
[02:44] <-==Nemesis==-> Robocop\RoboCopv10.01a.lua:623: attempt to index local `handle' (a nil value)
[02:44] <-==Nemesis==->
[

I dont know what it means is anyone else getting this prob? Or is there a way i can hide this info from showing up in main? ?(

are you using the rigt ptokax? i think its 16.05 u need ot higher


Also optimus ive got passive users in my hub and they dont have any bricks, but they are passive. so people are having trouble connecting to each other. any ideas?

[Madman]

Originally posted by jadehenry04

Originally posted by Ricky12
I keep getting this is main chat:
[02:44] <-==Nemesis==-> Robocop\RoboCopv10.01a.lua:623: attempt to index local `handle' (a nil value)
[02:44] <-==Nemesis==->
[

I dont know what it means is anyone else getting this prob? Or is there a way i can hide this info from showing up in main? ?(

are you using the rigt ptokax? i think its 16.05 u need ot higher

16.06 for 10.01b actually.... =)

[Herodes]

Originally posted by jadehenry04
Also optimus ive got passive users in my hub and they dont have any bricks, but they are passive. so people are having trouble connecting to each other. any ideas?

Would it be that you have the tag hiding function of ptokax in action? cause if a user cant get the tag of another user then he cant know if he is passive or not ...

[imby]

Originally posted by Herodes

Originally posted by jadehenry04
Also optimus ive got passive users in my hub and they dont have any bricks, but they are passive. so people are having trouble connecting to each other. any ideas?

Would it be that you have the tag hiding function of ptokax in action? cause if a user cant get the tag of another user then he cant know if he is passive or not ...

Whether one gets the bricks in DC++ doesn't really have anything to do with tags. Users only show the bricks to you when they've made some action, like a search for example. I'm not sure it's worth keeping tags on, so people can check the modes, since i truly do doubt most users do check peoples tags for that. Suppose it is a problem though. One solution would be to put A or P at the beginning of peoples descriptions.

[Herodes]

Originally posted by imby
I'm not sure it's worth keeping tags on, so people can check the modes, since i truly do doubt most users do check peoples tags for that.

Well you are right to doubt ppl checking the tags for that A, P, S or 5 in the M: field... but the clients do... thats how they assign the brick. Searches are also a sign for that  but I dont know of any client that decides the mode of an other user in that way ..

[imby]

Originally posted by Herodes

Originally posted by imby
I'm not sure it's worth keeping tags on, so people can check the modes, since i truly do doubt most users do check peoples tags for that.

Well you are right to doubt ppl checking the tags for that A, P, S or 5 in the M: field... but the clients do... thats how they assign the brick. Searches are also a sign for that  but I dont know of any client that decides the mode of an other user in that way ..

I thought DC++ acted that way? If you join a hub that shows tags, or strips them out, DC++ still shows no bricks for all users in both types of hubs. Except maybe one that has searched while you're in there. If you check back after say 12 hours a lot of the passive users seem to have bricks, probably due to their activity while you've been there? I'm probably wrong, guess it doesn't matter anyway :)

[Optimus]

- Download new profiles 16.07 here

- Optimus

[imby]

Originally posted by Optimus
- Download new profiles 16.07 here

- Optimus

thanks, robocop must be a pain for you now, with so many things changing within the hubsoft :)