- RoboCop v4.0 - Testdrive 3 or Higher!

[mOrrI]

Opti i got a question....

Does the robocop disable the Ptokax Options of Checking slots, hubs, hub/slot ratio????

[mOrrI]

Opti i got a question....

Does the robocop disable the Ptokax Options of Checking slots, hubs, hub/slot ratio????

[uffetjur]

Does the robocop disable the Ptokax Options of Checking slots, hubs, hub/slot ratio????


yes it does, but has an option for keeping the hubsoft

[gazzer]

Originally posted by mOrrI
Opti i got a question....

Does the robocop disable the Ptokax Options of Checking slots, hubs, hub/slot ratio????

actually thats good question, i'd like a bit more on that if poss anyone.

if someone has there hub set on slots hubs share etc in ptokax and on redirect on those options to say nowhere.org

but has diff addy on network tab. where would peeps go first. i am assuming on low shares or slots to nowhere.org?
damm 6.34 am writing this sad ehhh

[mOrrI]

Originally posted by uffetjur
Does the robocop disable the Ptokax Options of Checking slots, hubs, hub/slot ratio????


yes it does, but has an option for keeping the hubsoft

i see so the robocop assumes those features.. ??

[mOrrI]

Originally posted by uffetjur
Does the robocop disable the Ptokax Options of Checking slots, hubs, hub/slot ratio????


yes it does, but has an option for keeping the hubsoft

i see so the robocop assumes those features.. ??

[ignazio]

Optimus RoboCop 10.01 c to a problem it doesn't accept the recordings of the users or to the less one from the confirmation but it doesn't result recorded the user in the PtokaX 0.3.3.0.b16.09

[14:38:25] <-=[OW]Horus=-> !regreg test test reg

but it doesn't do her/it

you can resolve this problem thanks ;(

[LoTeK_]

Optimus RoboCop 10.01 c to a problem it doesn't accept the recordings of the users or to the less one from the confirmation but it doesn't result recorded the user in the PtokaX 0.3.3.0.b16.09

Wrong syntax, reg command is:

!regreg nickname pass
not
!regreg nickname nickname profile

to reg vip is
!regvip

[LoTeK_]

Optimus RoboCop 10.01 c to a problem it doesn't accept the recordings of the users or to the less one from the confirmation but it doesn't result recorded the user in the PtokaX 0.3.3.0.b16.09

Wrong syntax, reg command is:

!regreg nickname pass
not
!regreg nickname nickname profile

to reg vip is
!regvip

[cpu-point]

I still have problems with !userinfo  it just appears in mainchat ( the commando) but there is no response at all ( tried 16.06 and 10.10b  and even 16.09 and 10.10c)

anybody an answer to help me ?


another problem : tried to update an master to netfouder... gives this error
[16:17] Robocop\RegisterCommands.lua:290: bad argument #1 to `input' (../RegisteredUsers.dat: No such file or directory

when i was using ptokax 16.09 and robo 10.10 c

[LiqUiD~TrolL]

i m getting an error too when i m trying to reg a user ,vip,op anything  see the error :

[18:28] <•AdmiN~BoT•> Robocop\RegisterCommands.lua:44: attempt to call method `isNickRegged' (a nil value)
[18:28] +regop sagit ooo
[18:30] <•AdmiN~BoT•> Robocop\RegisterCommands.lua:24: attempt to call method `isNickRegged' (a nil value)
[18:30] +regvip fhfhh hfhfh



shit why is this happeneing??? any ideas optimus ??

[Herodes]

Originally posted by LiqUiD~TrolL
i m getting an error too when i m trying to reg a user ,vip,op anything  see the error :

[18:28] <•AdmiN~BoT•> Robocop\RegisterCommands.lua:44: attempt to call method `isNickRegged' (a nil value)
[18:28] +regop sagit ooo
[18:30] <•AdmiN~BoT•> Robocop\RegisterCommands.lua:24: attempt to call method `isNickRegged' (a nil value)
[18:30] +regvip fhfhh hfhfh



shit why is this happeneing??? any ideas optimus ??

Yes,... I see that you are using a Ptx that dont have the
frmHub:isNickRegged(Nick)         - Return 1 if user is registered, else nil.
function...

make sure you are using PtokaX 16.09 ( ... also Read The Fecking Manual (RTFM) of any script that you are using BEFORE posting bugs... this is frustrating, I am in a tense day again ...)

[Doobert]

Originally posted by cpu-point
I still have problems with !userinfo  it just appears in mainchat ( the commando) but there is no response at all ( tried 16.06 and 10.10b  and even 16.09 and 10.10c)

anybody an answer to help me ?


another problem : tried to update an master to netfouder... gives this error
[16:17] Robocop\RegisterCommands.lua:290: bad argument #1 to `input' (../RegisteredUsers.dat: No such file or directory

when i was using ptokax 16.09 and robo 10.10 c

To get information on a user the command is not !userinfo   Try !info instead that does work and is the correct command:)

[Nada@WTB]

Originally posted by ignazio
Optimus RoboCop 10.01 c to a problem it doesn't accept the recordings of the users or to the less one from the confirmation but it doesn't result recorded the user in the PtokaX 0.3.3.0.b16.09

[14:38:25] <-=[OW]Horus=-> !regreg test test reg

but it doesn't do her/it

you can resolve this problem thanks ;(

you need the fixed lua

http://members.home.nl/jakootstra/RoboCopv10.01c.lua

[LiqUiD~TrolL]

the problem i had before it is fixed, i fixed the hub software with the new versions of ptoka x and robocop

but now i have a diffrend probblem there is an add message in robocop

and i want this message be private
but it appears in the main chat of the hub as private =/
see this  :

[19:59] *** Connected
[20:00] <•AdmiN~BoT•> This hub is running PtokaX DC Hub 0.3.3.0 build 16.09 [debug] (UpTime: 0 days, 0 hours, 0 minutes)
[20:00] *** Stored password sent...
[20:00] The Demented LiqUiD~TrolL Has Arrived.
[20:00] <•AdmiN~BoT•>

   ?????????? Welcome to P=s=y=C=h=e=d=e=l=i=C==D=r=e=a=m=S ??????????
       Your name is: LiqUiD~TrolL
       Your profile is: NetFounder
       Your current ip:
       Your using client: DC++
       Your version is: 0.668
       Your current mode is: Active
       Your total hubs are: 1
       Your open slots are: 1
       Your sharesize is: 89.41 MB
       Your description is: Psy-Dream'S_Owner
       Your connection is: DSL
       Your email is:
   ?????????? Welcome to P=s=y=C=h=e=d=e=l=i=C==D=r=e=a=m=S ??????????

[20:00] Private message from •AdmiN~BoT•: <•AdmiN~BoT•>
   Here you can put a message that will be displayed in PM to Connecting users...

[20:00] <•AdmiN~BoT•> Settings Profile NetFounder - Minshare: 0 GB, Minslots: none, Maxslots: none, Maxhubs: none, Slotshubsratio: none/none
[20:00] <•AdmiN~BoT•> Type !help to see the available commands for your profile.
[20:00] Enhanced Right Click Support for [RoboCop] is available!

[johny]

hi LiqUiD~TrolL

the next lines i see when i check it with a div. nick,

[19:52:44] [fow]Johny Has Left The Hub
[19:52:46] [fow]Johny Climbs In Through The Window.

and the next line do i see when i log in by my self.

[19:54] [fow]Johny Climbs In Through The Window.
[19:54] <[fow]-Robocop?>

   ?????????? Welcome to 1 Dutch FOW Community 1 ??????????
       Your name is: [fow]Johny
       Your profile is: NetFounder
       Your current ip: 192.168.1.25
       Your using client: DC++
       Your version is: 0.668
       Your current mode is: Active
       Your total hubs are: 9
       Your open slots are: 1
       Your sharesize is: 0.00 B
       Your description is:  
       Your connection is: DSL
       Your email is:
   ??????????????????????????????????????????????????
       The Hub Site is located at:   http://cccl-nl.xs4all.nl/mambo/
   ??????????????????????????????????????????????????
   Y  O  U    N  E  E  D    T  O    B  E    R  E  G  G  E  D    T  O    D  O  W  N  L  O  A  D
   kirjoita !regme+salasana mainiin rekister?id?ksesi itsesi, (voit luoda vain yhden nimimerkin
   Skriv !regme + l?senord i main chat f?r att registrera dig i denna hub
   Skriv !regme password (Velg ditt eget passord) for ? bli registrert
   Type  !regme + password in the main chat to register yourself in this hub
   typ   !regme + paswoord in de main chat om je te registreren in deze hub
   ??????????????????????????????????????????????????
       This hub is designed for the sharing of legal copies of files.
       Any file transfers that go on here are the users own responsibility.
       The hub or its operators assumes no liability for anything in this hub
   ?????????? Welcome to 1 Dutch FOW Community 1 ??????????

[19:54] <[fow]-Robocop?> Settings Profile NetFounder - Minshare: 0 GB, Minslots: 1, Maxslots: 50, Maxhubs: 70, Slotshubsratio: none/none
[19:54] <[fow]-Robocop?> Type !help to see the available commands for your profile.

so it looks to me its totaly private

[??????Hawk??????]

but now i have a diffrend probblem there is an add message in robocop

and i want this message be private
but it appears in the main chat of the hub as private =/
see this :

Maby you should try setting your client to pop up private messages....  


??????Hawk??????

[jadehenry04]

wens there never gunna be any more probs uh?? lol

[Bud]

the!banip command does not work !?!

*** Syntax error: The parameter '129.42.16.103' is not a valid IP address!

unpacked robo twice to fresh ptokax

How can i fix this? ... anyone???

 8)

[jiten]

Originally posted by Bud
the!banip command does not work !?!

*** Syntax error: The parameter '129.42.16.103' is not a valid IP address!

unpacked robo twice to fresh ptokax

How can i fix this? ... anyone???

 8)

Have u typed it correctly?
The syntax is: !banip ip

[Bud]

Yes i type like i always do:
!banip xxx.xxx.xxx.xxx flooder

this is normally how it shld work .. :)

really weird that it dsnt

[LiqUiD~TrolL]

hello hawk

well my bro in the other hubs the messages where pop up alone
and the same was happeneing with the old hub software
it was as private,not in PM ,so somethings wrong with ptoka or better i guess wih robocop.maybe something in add message settings.
or maybe the way the text is??

it happened to me in the past,

any suggestions???  OPtimus ??

[jiten]

Yups, that's the problem.
It should be only: "!banip xxx.xxx.xxx.xxx" without the flooder's nick in front of the IP.
Here's a correct example: !banip 196.46.21.20

Best regards.

[TTB]

Hi,

bug report robo10c:

[22:49:55]  Robocop\RegularCommands.lua:104: attempt to index local `handle' (a nil value) 
[22:49:55] <[SU]TTB>  #online 					- Set a online check to a selected user or ip

it was a mistake to paste that line, but it gave an error... maybe you can do something with it Opti.

[LiqUiD~TrolL]

try to download the latest ptoka x version  
PtokaX 0.3.3.0 build 16.09
try this : here


;-)
and better don t try to extract files from the old ptopka to the new,the r useing diffrend kind of XML n .....

i did that yesturday and it worked =)