- RoboCop v4.0 - Testdrive 3 or Higher!

[sander815]

other question:
when i have this in minversion.tbl
tMinversion = {
["DC++"] = "0.304",
["Valknut"] = "0.2.20",
["NMDC2"] = "2.02",
}

does that mean only these clients are allowed?
If not, how can i block other clients?

[IVANNOFKE]

Originally posted by Optimus


So what do you all think about it?
1. Adapted Robocop and reorder the profiles from high to low (effect is described above)
2. Leave things the way they are

- Optimus

I say keep it the way it is if ya got good masters they are trusted people so they wont upgrade themselves.

I run RC from the time around version 7.
Hardly had any probs wich i aint could fix thru settings myself.

Needed a few posts to make things clear.

I am up to date now and all running fine.

TNX OPTI

[jadehenry04]

So what do you all think about it?
1. Adapted Robocop and reorder the profiles from high to low (effect is described above)
2. Leave things the way they are

I think you should keep it the same any way i dont see the point in having more than one master- and netfounder doesnt have more power than the hub master sooo.....

[TTB]

Hi,

"bug" report. If have set the prefix in RC to only: #

If I type: #inbuild... it will give this:

Here are your available [Master] Inbuild-Hub commands, they work in MAIN as in PM:

	  #gag 					- The user cant post to mainchat anymore
	  #ungag 					- The user can post to mainchat again
	  #banip 					- Permanently ban IP address (if user is offline)
	  #unban 					- Unban IP address or 
	  #nickban 					- Permanently ban  from offline user
	  #getbanlist					- Display list of banned IP addresses
	  #clrpermban					- Clear permban list
	  #clrtempban					- Clear tempban list
	  #op 					- Give a temporal [OP] status to a user for one session
	  #getinfo 					- Display basic info of the user
	  #ipinfo 					- Show all on/offline users with that ip
	  #iprangeinfo 					- Show all on/offline users within that iprange
	  #userinfo 					- Show all visits of that user
	  #restart						- Restart the hub
	  #restartscripts					- Restart scripting part from the hu!
	  #topic						- Change Hub Topic
	  #tempban   ()			- temp ban IP address of the  - 
	  #tempunban  					- unban temp IP address
	  #gettempbanlist 					- display list of tempbanned IP addresses
	  #reloadtxt					- reload all textfiles

When typing that in main chat, off course, only !-prefix can be used. In RC8b was this problem not there...

[jadehenry04]

ive noticed this because i tried changing mine to + but hmm it didnt work lol

[DEEP-GOA]

hi optimus

is possible to have a !tempblock nick hr:mn command?
should block only selected (registered) users,, via rightclick
(with block search/dl/main chat/pm option)

may be possible,, may be not,,
and,,
thx 4 the great robocop

big greetz

[Optimus]

is possible to have a !tempblock nick hr:mn command?
should block only selected (registered) users,, via rightclick
(with block search/dl/main chat/pm option)

I put in on list thanks.
I next version there will be a totaly new Download Blocker it can be set for all profiles and to all profiles. verry advanced. Will test that first before your new option can be added.

- Optimus

[Optimus]

"bug" report. If have set the prefix in RC to only: #

If I type: #inbuild... it will give this:


code:--------------------------------------------------------------------------------Here are your available [Master] Inbuild-Hub commands, they work in MAIN as in PM:

     #gag                - The user cant post to mainchat anymore
     #ungag                - The user can post to mainchat again
     #banip                - Permanently ban IP address (if user is offline)
     #unban                - Unban IP address or
     #nickban                - Permanently ban from offline user
     #getbanlist               - Display list of banned IP addresses
     #clrpermban               - Clear permban list
     #clrtempban               - Clear tempban list
     #op                - Give a temporal [OP] status to a user for one session
     #getinfo                - Display basic info of the user
     #ipinfo                - Show all on/offline users with that ip
     #iprangeinfo                - Show all on/offline users within that iprange
     #userinfo                - Show all visits of that user
     #restart                  - Restart the hub
     #restartscripts               - Restart scripting part from the hu!
     #topic                  - Change Hub Topic
     #tempban ()         - temp ban IP address of the -
     #tempunban                - unban temp IP address
     #gettempbanlist                - display list of tempbanned IP addresses
     #reloadtxt               - reload all textfiles--------------------------------------------------------------------------------


When typing that in main chat, off course, only !-prefix can be used. In RC8b was this problem not there...

You need to add other prefixes manualy in ptokax for inbuild commands

[DEEP-GOA]

Originally posted by Optimus

is possible to have a !tempblock nick hr:mn command?
should block only selected (registered) users,, via rightclick
(with block search/dl/main chat/pm option)

I put in on list thanks.
I next version there will be a totaly new Download Blocker it can be set for all profiles and to all profiles. verry advanced. Will test that first before your new option can be added.

- Optimus

i can only say,, zakabooooooooooooooooom *bigsmile*
many thanks optimus

[sander815]

any1 any idea?
I cannot use robocop with 16.09 now. When robocop is iff, everything worx fine

Originally posted by sander815
ptokax crashes here when a reg logs in:


---------------------------4/18/05 11:52:04 AM---------------------------
Exception 'EZeroDivide' in module PtokaX.exe at 000A3295
Floating point division by zero

Call stack:
:004A4295 [PtokaX.exe] luaV_execute (lvm.c, line 555)
:00517160 [PtokaX.exe]
:005909FD [PtokaX.exe]
:00517194 [PtokaX.exe]
:005908E9 [PtokaX.exe]
:0049EBF5 [PtokaX.exe] luaM_realloc (lmem.c, line 69)
:00488CCF [PtokaX.exe] luaD_call (ldo.c, line 313)
:004A5CD2 [PtokaX.exe] f_call (lapi.c, line 672)
:00488595 [PtokaX.exe] luaD_rawrunprotected (ldo.c, line 
:77C440E0 [SHELL32.dll]

Main Thread ID = 0000009F, Current Thread ID = 0000009F
Registers:
EAX = 01B92E88  CS = 001B  EIP = 004A42A4  Flags = 00010246
EBX = 01B514E0  SS = 0023  ESP = 0012F280    EBP = 0012F428
ECX = 01B92E68  DS = 0023  ESI = 0301004F    FS  = 0038
EDX = 01B92E78  ES = 0023  EDI = 01B92E68    GS  = 0000
Code at CS:EIP
DD 58 08 E9 6E F5 FF FF 6A 08 8B 95 2C FF FF FF 
Stack:
00000000 00000000 01B514E0 00000000 00000000 
00000000 00000000 77C440E0 00518905 01B9B8CC 
005D6E0B 00000002 00000000 00000000 01B9B758 
77C440E0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 

Additional info:
iJoins: 9, iParts: 7, iLogged: 1
NicklistLen : 46
OplistLen   : 44
MyInfosLen  : 228
MyInfosTagLen  : 260

[PPK]

Originally posted by sander815
any1 any idea?

Division by 0 in script, is sad but lua crash on this  

[night_hawk]

i had that trouble to..The trouble is the share size, slot, hub/slot, and max hubs for ops and up...so turn all those settings off and only use ptokax setting not robocops or it will never work...

[jadehenry04]

so have i got this right that peoples ptokax and robo is crashing?? ive had no problems atall or is that just me?

[Smurv]

I want to allow using NMDC for MAC Computers on hub. But i dont know how. Im using Ptokax 16.09 and Robocop 10.01c. I add NMDC minversion 1.1.0 but it doesnt work :( My user always get this message:

This hub is running PtokaX DC Hub 0.3.3.0 build 16.09 (UpTime: 0 days, 0 hours, 14 minutes)
You are disconnected for using a none regonized client, please download a regular DCPlusPlus client at http://dcplusplus.sourceforge.net

Can someone help please?

[Doobert]

For some time now RC has not allowed clients in without a tag. Read back in this thread to see some of the arguments for and against. I do a work around which involves MAC users emailing me before they can get in the hub then I can set them in the immune list of RC so they can get in.
I dont have too many of them so I can keep an eye on them.
Many of the MAC users I talk to long for a decent client they could use but it seems no one is developing one.
Hope that helps

[Markos]

Your nick contains illegal characters! Please correct it and get back again.
 

can sumone help me i need to turn this off so any character can be in nickname  ;)

[imby]

Originally posted by Markos
Your nick contains illegal characters! Please correct it and get back again.
 

can sumone help me i need to turn this off so any character can be in nickname  ;)

Could it not be in RoboCop.exe > More Options > Bad nicks?

I believe most are banned for technical reasons so they're probably banned for a logical reason.

[Markos]

thanks m8 i notest sum can get in and sum cant

[Optimus]

any1 any idea?
I cannot use robocop with 16.09 now. When robocop is iff, everything worx fine




Zitat:
--------------------------------------------------------------------------------
Originally posted by sander815
ptokax crashes here when a reg logs in:



php:--------------------------------------------------------------------------------Exception 'EZeroDivide' in module PtokaX.exe at 000A3295
Floating point division by zero

Call stack:
:004A4295 [PtokaX.exe] luaV_execute (lvm.c, line 555)
:00517160 [PtokaX.exe]
:005909FD [PtokaX.exe]
:00517194 [PtokaX.exe]
:005908E9 [PtokaX.exe]
:0049EBF5 [PtokaX.exe] luaM_realloc (lmem.c, line 69)
:00488CCF [PtokaX.exe] luaD_call (ldo.c, line 313)
:004A5CD2 [PtokaX.exe] f_call (lapi.c, line 672)
:00488595 [PtokaX.exe] luaD_rawrunprotected (ldo.c, line
:77C440E0 [SHELL32.dll]

Main Thread ID = 0000009F, Current Thread ID = 0000009F
Registers:
EAX = 01B92E88  CS = 001B  EIP = 004A42A4  Flags = 00010246
EBX = 01B514E0  SS = 0023  ESP = 0012F280    EBP = 0012F428
ECX = 01B92E68  DS = 0023  ESI = 0301004F    FS  = 0038
EDX = 01B92E78  ES = 0023  EDI = 01B92E68    GS  = 0000
Code at CS:EIP
DD 58 08 E9 6E F5 FF FF 6A 08 8B 95 2C FF FF FF
Stack:
00000000 00000000 01B514E0 00000000 00000000
00000000 00000000 77C440E0 00518905 01B9B8CC
005D6E0B 00000002 00000000 00000000 01B9B758
77C440E0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF

Additional info:
iJoins: 9, iParts: 7, iLogged: 1
NicklistLen : 46
OplistLen   : 44
MyInfosLen  : 228
MyInfosTagLen  : 260?>

Thanks it fixed now. The problem is the slots/hubs ratio check.

= Optimus

[jadehenry04]

Optimus when is there gunna be a new update out?? and wat has been changed if its not to much would u possibly be able to post it here plz! and when is there going to be no more errors? i never seen a srcipt with so many errors?? great script though :) i wouldnt run a hub without it!!

[Smurv]

Originally posted by Doobert
For some time now RC has not allowed clients in without a tag. Read back in this thread to see some of the arguments for and against. I do a work around which involves MAC users emailing me before they can get in the hub then I can set them in the immune list of RC so they can get in.
I dont have too many of them so I can keep an eye on them.
Many of the MAC users I talk to long for a decent client they could use but it seems no one is developing one.
Hope that helps

Its perfect idea! Thanx very much!!!

[IVANNOFKE]

Sorry folks,

I dont get it u all talking about errors and ptokax crashes. In my idea most of the times it aint somut with RC or ptokax. My ptokax has never crashed and RC giving no errors at all.

Might it be ur machines that aint setup right??
Just an idea lol.

[jadehenry04]

Same here IVANNOFKE  I havent had any problems either with it  crashing ect???

[PPK]

Originally posted by IVANNOFKE
Might it be ur machines that aint setup right??
Just an idea lol.

Bad idea, if you enable hub/slot ratio check in robocop i show you how easy is to crash it

[bastya_elvtars]

Originally posted by PPK

Originally posted by IVANNOFKE
Might it be ur machines that aint setup right??
Just an idea lol.

Bad idea, if you enable hub/slot ratio check in robocop i show you how easy is to crash it :D

Yes, it just took 1 month to debug this part in lawmaker. :P