- RoboCop v4.0 - Testdrive 3 or Higher!

[johny]

hi ya optimus

thanks for the new robocop man.

but i discofered a nice prob
 when i upgrade a regged user to vit it does not show up as a vip in ptokax at all
the same goes up if i downgrade a vip to reg.

in both cases robocop tels me a reg is upgrade to vip and a vip is downgraded to reg

[GeceBekcisi]

!hconfig gives "Robocop\HubConfigStats.lua:65: attempt to concatenate a nil value" error

[Jacksons_Xone]

I get this error in 10d

Syntax Robocop\RoboCopv10.01d.lua:526: attempt to call method `GetRegisteredUsers' (a nil value)
Syntax Robocop\RegisterCommands.lua:280: attempt to call method `GetRegisteredUsers' (a nil value)
Syntax Robocop\RoboCopv10.01d.lua:526: attempt to call method `GetRegisteredUsers' (a nil value)

[Cêñoßy†ê]

Originally posted by GeceBekcisi
!hconfig gives "Robocop\HubConfigStats.lua:65: attempt to concatenate a nil value" error

It does that when maxshare limit is disabled =(

[23:06:24] Master C??o?y?? changed the script maxshare for Operators to: off
[23:06:30] Robocop\HubConfigStats.lua:65: attempt to concatenate a nil value
[23:06:30] !hconfig

when maxlimit has something,works great

[Herodes]

Originally posted by Jacksons_Xone
I get this error in 10d

Syntax Robocop\RoboCopv10.01d.lua:526: attempt to call method `GetRegisteredUsers' (a nil value)
Syntax Robocop\RegisterCommands.lua:280: attempt to call method `GetRegisteredUsers' (a nil value)
Syntax Robocop\RoboCopv10.01d.lua:526: attempt to call method `GetRegisteredUsers' (a nil value)

you dont have the latest ptokax running... http://www.ptokax.org

[Optimus]

thanks for the new robocop man.

but i discofered a nice prob
when i upgrade a regged user to vit it does not show up as a vip in ptokax at all
the same goes up if i downgrade a vip to reg.

in both cases robocop tels me a reg is upgrade to vip and a vip is downgraded to reg

Yups my fault because of debuging some lines where blocked out.
A fix will follow soon

- Optimus

[Optimus]

!hconfig gives "Robocop\HubConfigStats.lua:65: attempt to concatenate a nil value" error

Thanks for report will be fixed for next update

- Optimus

[Rulle]

Firts: Thank you for very nice piece of program -
I have one thing I cant seem to get working properly
reload text as op - and i have this box checked, still got denial
Any how keep up the good work, I think new verison look very promising sofar :D
*Edit* Here be another problem, one Op use his clients inbuild kick command, after kick RC reply:
Robocop\RegularCommands.lua:529: attempt to index field `?' (a nil value)
Using 17.03 debug and RC and RC 10.01d btw :)

[MichaelD]

Hi

I've just upgraded RoboCop but some of the right click commands don't seem to be working.

Show unregged users shows nothing
Show users in NoClean list doesn't work, but adding them does, only it's back to front. lol  When the first box pops up to add or delete, you have to enter the nick, then for the second where you enter the nick, you add or delete.  

Show inbuilt commands doesn't work either

Watch user doesn't work.

Show users with a specific IP.  All users I've tried show up as  The user is offline..!  Including me and some users I've tested from the list > user info

I've tried rearranging the order of the scripts, shutting the hub down, closing DC and starting it up again but nothing works  Any suggestions please? ?(

I'm using PtokaX 0.3.3.0 build 17.03

[Optimus]

I've just upgraded RoboCop but some of the right click commands don't seem to be working.

Show unregged users shows nothing
Show users in NoClean list doesn't work, but adding them does, only it's back to front. lol When the first box pops up to add or delete, you have to enter the nick, then for the second where you enter the nick, you add or delete.  

Show inbuilt commands doesn't work either

Watch user doesn't work.

I have tested this part and haven't found any problems here. There must be an other reason why you have these problems.

- Optimus

[MichaelD]

I'll have another go at it. lol  

[witch]

Thx a lot Optimus!!!!!

KILLer  

[Andoz]

Optimus. Does your regcleaner show users that has been cleared? If no i want that as a request:)
I used regcleaner as a script before and it did not show cleaned users.
Asked for it in this forum just before you released 10.01d !

[MusicMan?]

Hi Optimus.

Found a couple of bugs m8, not sure if anyone else has encountered them yet.

If you have setup block main chat for non reg users they can still type in there (I tried restarting the script but it didn't work)

Also m8 if i have no caps allowed in main that doesn't work either, tried it with multiple profiles  ;(

Cya later.

MusicMan?      

[Optimus]

*** Connected
This hub is running PtokaX DC Hub 0.3.3.0 build 17.03 (UpTime: 0 days, 0 hours, 0 minutes)
Welcome User Miracle to TEST = HUB have a good time.
Settings for profile User: Min share: 0 GB, Min slots: none, Max slots: none, Max hubs: none, Slot per hub ratio: none/none
Type !help to see the available commands for your profile.
*** You're not athorized to chat!

Working here m8, recheck everything again please.

- Optimus

[Optimus]

Also m8 if i have no caps allowed in main that doesn't work either, tried it with multiple profiles  

Also working here, must say that operators are not checked only (user, reg, vip)

- Optimus

[johnynl]

hi top muis,

hehehe lol man, did you already fixed the up and downgrade part????

[MusicMan?]

thanx for the quick reply Opti  

I'll do a double check of the setting m8, but i'm sure i activated block main chat in the GUI, i tried as a non & non reg user to type in caps m8 for testing purposes and it still allowed me to type them.

Cheers for your help.

MusicMan?   )

[IVANNOFKE]

Hi optimus,

About the NO_CAPS in main.

I tryed it with normal users and it aint working here either.

[MusicMan?]

Originally posted by IVANNOFKE
Hi optimus,

About the NO_CAPS in main.

I tryed it with normal users and it aint working here either.

Hi m8, I've now found out i just needed to move the script running order around abit, I moved RoboCop up and moved a couple of other scripts down.

Everything seems to be working now, inc. not being able to chat in main.

Thanx

MusicMan?      

[Optimus]

Hi optimus,

About the NO_CAPS in main.

I tryed it with normal users and it aint working here either.

Other scripts may interfere try changing your scripts order like musicman has done. But maybe problem some where else;)

- Optimus

[Rulle]

Oh, and 1 other thing, is here any way I can make hubad massage that robo send out intervalled automaticly be shown for example only for profiles level 2 or less and such? And yes, how to deactivate VIPchat?

[ignazio]

hi Optimus
[10:50] 04/29/05 10:50:37 - NetFounder -=Mercurio=- used command: !hconfig
[10:50] Robocop\HubConfigStats.lua:65: attempt to concatenate a nil value

me from this error thing can be??

I use 0.3.3.0.b17.03.nt.dbg

[johny]

Hi ya Optimus.
Ok, after redownloading i reinstalled robocop again and did some more testing.

Registering a user works for all levels, and it shows up in ptokax too.
But up and or downgrading a user does only show up right in the main chat, but does still not affect in ptokax at all.
Could you pls fix that for us all Robocop Users plz,
and tell us which files we need to replace to get it working.

Thanks again for you speedy service man.

[Markos]

hi all nice work Optimus i like the new robo

only thing i dont like is u cant block mainchat for non regged users.
wen i reg sumone it dont tell me in opchat that i hav regged them.
is there an option to do this and i cant see it ??