- RoboCop v4.0 - Testdrive 3 or Higher!

[Optimus]

This is what i have done sofar for RoboCopv10.01d

- Made new downloadblocker can be set for all profiles
- Added download on/off for each profile and to what profiles
- Added mainchat on/off for each profile
- Added search on/off for each profile
- Added private message on/off each profile and to what profiles
- Fixed bug in sending download blocker messages
- Changed GUI layout for greating more work space
- Added HubUptime in Hubconfig
- Added KB and TB to minshare, maxshare settings
- Optimized !mass code some more
- Optimized !showreg code some more
- Changed !hconfig, only the most important info is displayed
- New database structure
- Added Registered/Database cleaner (for removing none used acounts after x weeks)
- Fixed !clear command and enabled it again
- added Dynamic redirect message (*** Dynamic redirect address is now set to: address)
- New !offline message system/code
- New watcher system now possible to set watchers for multi suspects
- Max watchers is set to 3 this is compiled in script can't be changed
- Changed so watcher only works for masters & netfounder profile
- Changed all for i = start,end do - To: - for a,b in ipairs(table) do
- Changed all for a,b in table do - To: - for a,b in pairs(table) do
- Changed !tophubbers now option to show from xx tm xx tophubbers example !tophubbers 100 200
- fixed error *Floating point division by zero (had todo with slots/hubs ratio)

I'm waiting for a new official Update of ptokax. Cause this version doesn't work on ptokax 16.09 only on the beta versions

- Optimus

[(NL)waarom]

This is what i have done sofar for RoboCopv10.01d
--------------------------------------------------------------------

Looks good Opti can't whait to try it

[tassen]

Have you fixed the redirect of an marked user to an redirect adress, i meen if i will redirect an special user to a special place that not listed in robocop.

Robocop tells me today you is not alow to use this command.

Regards Tassen

[BeeR]

Originally posted by Optimus
This is what i have done sofar for RoboCopv10.01d

- Made new downloadblocker can be set for all profiles
- Added download on/off for each profile and to what profiles
- Added mainchat on/off for each profile
- Added search on/off for each profile
- Added private message on/off each profile and to what profiles
- Fixed bug in sending download blocker messages
- Changed GUI layout for greating more work space
- Added HubUptime in Hubconfig
- Added KB and TB to minshare, maxshare settings
- Optimized !mass code some more
- Optimized !showreg code some more
- Changed !hconfig, only the most important info is displayed
- New database structure
- Added Registered/Database cleaner (for removing none used acounts after x weeks)
- Fixed !clear command and enabled it again
- added Dynamic redirect message (*** Dynamic redirect address is now set to: address)
- New !offline message system/code
- New watcher system now possible to set watchers for multi suspects
- Max watchers is set to 3 this is compiled in script can't be changed
- Changed so watcher only works for masters & netfounder profile
- Changed all for i = start,end do - To: - for a,b in ipairs(table) do
- Changed all for a,b in table do - To: - for a,b in pairs(table) do
- Changed !tophubbers now option to show from xx tm xx tophubbers example !tophubbers 100 200
- fixed error *Floating point division by zero (had todo with slots/hubs ratio)

I'm waiting for a new official Update of ptokax. Cause this version doesn't work on ptokax 16.09 only on the beta versions

- Optimus

Hi Opti
any chance u add stringban (checkin nick, tag and description) with option to block or rd ??

[uffetjur]

Now is new ptoka released so we just have to wait for the updated robocop

hope that Optimus adds the dl-link for frame.net in hes posts hard enough to scroll throw this tread

[Doobert]

Ive just downloaded Ptokax 17.02 but Im going to wait for the new RC before runing it so I can do a fresh installof all files.
Optimus any idea when you might release  version d?

as ever thanbks for all the work you do on this  its much appreciated:)

[Daywalker]

yeah...me to...got everything ready set  

[Optimus]

I think sunday evening or monday will be a good day

- Optimus

[Markos]

cool nice one Optimus

[GeceBekcisi]

I get "You are not allowed to" messages for all profiles except users and NetFounders (I am a NF) when I try to move a bit... Is this something related with the entry below? I am using Px17.02 + Rc10.01c

Originally posted by Optimus
When you do this?
a.) The profile numbers change so robocop gets confused that will result in problems.
b.)Other scripts & packages will be incompatible with the reorderd profiles because off profile number changes.

So i'm stuck also cause the problems can only be resolved by reordering the profiles.

So what do you all think about it?
1. Adapted Robocop and reorder the profiles from high to low (effect is described above)
2. Leave things the way they are

- Optimus

[imby]

How does one get download blocker to work for passives?

[Optimus]

I get "You are not allowed to" messages for all profiles except users and NetFounders (I am a NF) when I try to move a bit... Is this something related with the entry below? I am using Px17.02 + Rc10.01c

What do you mean exactly, other possible problem can be that you have reordered your profiles then probs like this will occure

- Optimus

[imby]

hmm, after further investigation, if you block connecttome for non reg users, passive users who are regged can't download off anyone?  ?( Anyone know why this is?

[ignazio]

hi Optimus it excuses my question when you will put online the new version of robocop for the new one 0.3.3.0.b17.03.nt.dbg ?????

[Markos]

hi Optimus it excuses my question when you will put online the new version of robocop for the new one 0.3.3.0.b17.03.nt.dbg ?????

                   it will be ether the night or munday

[PPK]

Originally posted by imby
hmm, after further investigation, if you block connecttome for non reg users, passive users who are regged can't download off anyone?  ?( Anyone know why this is?

Yes is easy, if you block non reg then is not allowed to send $ConnectToMe connection request... and if pasive reg want to download from blocked active then send $RevConnectToMe and active reply with $ConnectToMe -> but script block it because is blocked  

[Casanova82]

When come out Rocobop 10.01d ???

[Gandalf]

Why all this questions about releases, the answer is simple ? when it?s finished.
I personally think it?s rude to ask that, we should be glad there are people?s that shared theirs programming skills whit us, and they do it for free. And in this case, he has already answered that question, look a few post?s up. Btw?Great work Optimus.

[MoNTeR]

Hello Everybody

I have a problem with inbuild comands !userinfo and !ipinfo. Im' running with ptokax 16.09 powered by RC 10.01c. I can't enable user statistis in ptoka 16.09 and 17.02. Anyone know why?

Same problem with !showlog. I've enabled ip logger, everything writes in logfile but when I use !showlog or !showlog I see:

*** User not found in logs!

*** IP not found in logs!

But they're in logfile. What am I doing wrong ?(

[imby]

Originally posted by PPK

Originally posted by imby
hmm, after further investigation, if you block connecttome for non reg users, passive users who are regged can't download off anyone?  ?( Anyone know why this is?

Yes is easy, if you block non reg then is not allowed to send $ConnectToMe connection request... and if pasive reg want to download from blocked active then send $RevConnectToMe and active reply with $ConnectToMe -> but script block it because is blocked  

Thanks, couldn't get any regged passive to download at all earlier. now it's reg'd passive can't connect to non reg'd user. Which is fine

[Herodes]

Originally posted by MoNTeR
Hello Everybody

I have a problem with inbuild comands !userinfo and !ipinfo. Im' running with ptokax 16.09 powered by RC 10.01c. I can't enable user statistis in ptoka 16.09 and 17.02. Anyone know why?

Same problem with !showlog. I've enabled ip logger, everything writes in logfile but when I use !showlog or !showlog I see:

*** User not found in logs!

*** IP not found in logs!

But they're in logfile. What am I doing wrong ?(

Search the forum on UserStatistics and you'll soon see the developers and other ppl mentioning that this part of the PtokaX software isn't finished, therefore not available.

[dkt]

Originally posted by Optimus



- IMPORTANT:

  The script uses a *.exe file called Robocop.exe to Configurate the script.
  If you are having problems running this file you have to download these libraryfiles.

   http://www.ascentive.com/support/new/libraryfiles.exe

  You just Install them to windows/system directory and done. (You Don't Have To Reboot After That!!) ;)  

i downloaded the libraryfiles.exe,then installed tat,then restarted my pc,then my pc did not start,it gave me error - ERROR IN EXPLORER, my windows98 did not start, i had to format my c drive and installed windows Me. wat was tat ?
very bad experience i had
:(

[zehrkool]

Does anyone know how to add a client to be allowed access ?  - this is to let web based clients ( $Web ) to connect for chat purposes.

Also how can I remove the register Tag ?
 - Previous versions gave the option to turn it on / off but since v10.01c this option is on as default and there is no option to turn it off.

Maybe this could be added to 10.01d ?

[ruspant]

Originally posted by Gandalf
Why all this questions about releases, the answer is simple ? when it?s finished.
I personally think it?s rude to ask that, we should be glad there are people?s that shared theirs programming skills whit us, and they do it for free. And in this case, he has already answered that question, look a few post?s up. Btw?Great work Optimus.

I personally agree 100% with you Gandalf.
You people must consider that "This is not a job".
All the work made by Optimus (and other guys too) is done for passion about this world.
Posts regarding bugs or improvements are always welcome but keep asking "when will be ready?" is quite annoying...

Thx to all
Ruspant

[Quattro]

Originally posted by dkt

Originally posted by Optimus



- IMPORTANT:

  The script uses a *.exe file called Robocop.exe to Configurate the script.
  If you are having problems running this file you have to download these libraryfiles.

   http://www.ascentive.com/support/new/libraryfiles.exe

  You just Install them to windows/system directory and done. (You Don't Have To Reboot After That!!) ;)  

i downloaded the libraryfiles.exe,then installed tat,then restarted my pc,then my pc did not start,it gave me error - ERROR IN EXPLORER, my windows98 did not start, i had to format my c drive and installed windows Me. wat was tat ?
very bad experience i had
:(

Did you check if the library files were intended for Win98?
and second i wouldn't want to run a hub on win 98 or win ME...
try Windows 2000 pro...